184 lines
7.5 KiB
Plaintext
184 lines
7.5 KiB
Plaintext
#@TYPE: Machine
|
|
#@NAME: ccmp15-dvk
|
|
#@DESCRIPTION: Configuration for Digi ConnectCore MP15 DVK
|
|
#@NEEDED_BSPLAYERS: layers/meta-digi
|
|
|
|
# Include the machine configuration for Digi's ConnectCore MP1.
|
|
include conf/machine/include/ccmp1.inc
|
|
|
|
DIGI_SOM = "ccmp15"
|
|
|
|
# =========================================================================
|
|
# Chip architecture
|
|
# =========================================================================
|
|
DEFAULTTUNE = "cortexa7thf-neon-vfpv4"
|
|
MACHINEOVERRIDES = "arm:armv7ve:stcommon:stm32mpcommon:stm32mp1common:stm32mp15common:${DIGI_FAMILY}:${DIGI_SOM}:ccmp15-dvk"
|
|
|
|
# =========================================================================
|
|
# boot device
|
|
# =========================================================================
|
|
# Configure the list of boards that enable NAND/SDCARD
|
|
DEVICE_BOARD_ENABLE:NAND += "${STM32MP_DEVICETREE}"
|
|
DEVICE_BOARD_ENABLE:SDCARD += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', '${STM32MP_DEVICETREE}', '', d)}"
|
|
|
|
# =========================================================================
|
|
# U-Boot configs
|
|
# =========================================================================
|
|
# Last one is the default (the one the symlinks point at)
|
|
UBOOT_CONFIG = "ccmp15-dvk"
|
|
UBOOT_CONFIG[ccmp15-dvk] = "ccmp15-dvk_defconfig,,u-boot.dtb"
|
|
# Remove STM32mp15 configs from ST layer
|
|
UBOOT_CONFIG:remove:stm32mp15common = "default_stm32mp15"
|
|
# List of U-Boot device tree to use
|
|
UBOOT_DEVICETREE = "${STM32MP_DEVICETREE}"
|
|
# Index of USB device for installer
|
|
UBOOT_INSTALL_USB_INDEX = "0"
|
|
# Index of microSD device for installer
|
|
UBOOT_INSTALL_SD_INDEX = "1"
|
|
|
|
# =========================================================================
|
|
# Machine settings
|
|
# =========================================================================
|
|
# Define list of devicetree per supported storage
|
|
STM32MP_DT_FILES_NAND = "ccmp15-dvk-512MB ccmp15-dvk-1GB"
|
|
STM32MP_DT_FILES_SDCARD = "${STM32MP_DT_FILES_NAND}"
|
|
STM32MP_DT_FILES_USB = "${STM32MP_DT_FILES_NAND}"
|
|
STM32MP_DT_FILES_UART = "${STM32MP_DT_FILES_NAND}"
|
|
|
|
# Extra DTB for board - need to specify it with .dtb ...
|
|
STM32MP_KERNEL_DEVICETREE:ccmp15-dvk += " \
|
|
ccmp15_bt_test.dtbo \
|
|
ccmp15_bt.dtbo \
|
|
ccmp15_v1.dtbo \
|
|
ccmp15_wifi.dtbo \
|
|
ccmp15-dvk_can1.dtbo \
|
|
ccmp15-dvk_can2.dtbo \
|
|
ccmp15-dvk_dlc0200ccp04df-mipi-dsi.dtbo \
|
|
ccmp15-dvk_eth0-10-100.dtbo \
|
|
ccmp15-dvk_fusion10-lvds.dtbo \
|
|
ccmp15-dvk_fusion7-parallel.dtbo \
|
|
ccmp15-dvk_g101evn010-lvds.dtbo \
|
|
ccmp15-dvk_mikroe-accel2-click.dtbo \
|
|
ccmp15-dvk_mikroe-gyro-click.dtbo \
|
|
ccmp15-dvk_mikroe-i2c-to-spi-click.dtbo \
|
|
ccmp15-dvk_nhd-3-5-640480ef-msxp-mipi-dsi.dtbo \
|
|
ccmp15-dvk_sv4e-mipi-analyzer.dtbo \
|
|
ccmp15-dvk_v1.dtbo \
|
|
ccmp15-dvk_v2.dtbo \
|
|
ccmp157-dvk.dtb \
|
|
"
|
|
FIT_CONF_DEFAULT_DTB = "ccmp157-dvk.dtb"
|
|
|
|
# =========================================================================
|
|
# optee
|
|
# =========================================================================
|
|
# Map OPTEE configuration to device tree list
|
|
OPTEE_DEVICETREE_optee = "${STM32MP_DEVICETREE}"
|
|
OPTEE_DEVICETREE_opteemin = "${STM32MP_DEVICETREE}"
|
|
# Supported boot schemes
|
|
BOOTSCHEME_LABELS ?= "optee"
|
|
BOOTSCHEME_DEFAULT ?= "optee"
|
|
# For sdk generation, declare the default board configuration to use.
|
|
ST_OPTEE_EXPORT_TA_REF_BOARD:stm32mp1common = "ccmp15-dvk-512MB.dts"
|
|
|
|
# =========================================================================
|
|
# Machine features
|
|
# =========================================================================
|
|
MACHINE_FEATURES += "bluetooth"
|
|
MACHINE_FEATURES += "wifi"
|
|
MACHINE_FEATURES += "gpu"
|
|
# When BOOTSCHEME_LABELS is set to "opteemin", optee doesn't get automatically
|
|
# added to MACHINE_FEATURES. Add it manually
|
|
MACHINE_FEATURES += "optee"
|
|
|
|
# =========================================================================
|
|
# Firmware
|
|
# =========================================================================
|
|
MACHINE_FIRMWARE:append = " firmware-murata-infineon"
|
|
|
|
MACHINE_EXTRA_RRECOMMENDS += " \
|
|
${MACHINE_FIRMWARE} \
|
|
"
|
|
|
|
# Default image for install scripts
|
|
DEFAULT_IMAGE_NAME ?= "dey-image-webkit"
|
|
|
|
# Wic files
|
|
WKS_FILES += " \
|
|
ccmp1-512MB.wks.in \
|
|
ccmp1-1GB.wks.in \
|
|
"
|
|
|
|
# For populate_sdk, gcc-arm-none-eabi_9 has a python2 dependency, so we remove it.
|
|
ST_TOOLS_FOR_SDK:remove = "nativesdk-gcc-arm-none-eabi"
|
|
|
|
# =========================================================================
|
|
# flashlayout
|
|
# =========================================================================
|
|
# Define the config labels to use to generate flashlayout file
|
|
|
|
# =========================================================================
|
|
# extlinux configuration
|
|
# =========================================================================
|
|
# As example, modify the default boot config for each target to M4 config
|
|
|
|
# =========================================================================
|
|
# Debug trace
|
|
# =========================================================================
|
|
# activate/deactivate the debug and trace on boot stage
|
|
ST_DEBUG_TRACE = "0"
|
|
|
|
# =========================================================================
|
|
# Flashlayouts
|
|
# =========================================================================
|
|
|
|
# =========================================================================
|
|
# DEY settings
|
|
# =========================================================================
|
|
IMAGE_CLASSES = "image_types_digi image_types-stubi"
|
|
|
|
# mkfs.ubifs parameters for boot partition (the one holding kernel and device tree files)
|
|
# Max LEB count (-c 255) calculated for a partition of up to 32 MiB considering 128 KiB erase-block size.
|
|
MKUBIFS_BOOT_ARGS ?= "-m 2048 -e 126976 -c 255"
|
|
|
|
# mkfs.ubifs parameters for recovery partition
|
|
# Same parameters as the boot partition, but using zlib compression to reduce image size.
|
|
MKUBIFS_RECOVERY_ARGS ?= "${MKUBIFS_BOOT_ARGS} -x zlib"
|
|
|
|
# mkfs.ubifs parameters for rootfs partition
|
|
# Max LEB count (-c 8191) calculated for a partition of up to 1 GiB considering 128 KiB erase-block size.
|
|
MKUBIFS_ARGS ?= "-m 2048 -e 126976 -c 8191"
|
|
|
|
# Wireless external module
|
|
HAS_WIFI_VIRTWLANS = "true"
|
|
|
|
# XBee
|
|
XBEE_RESET_N_GPIO ?= "GPIOZ@2"
|
|
XBEE_TTY ?= "ttySTM2"
|
|
|
|
# Per-machine DISTRO_FEATURES customization
|
|
MACHINE_DISTRO_FEATURES_ADD = "efi optee"
|
|
MACHINE_DISTRO_FEATURES_REMOVE = "vulkan x11"
|
|
|
|
# Disable use of vendorfs partition
|
|
ST_VENDORFS = "0"
|
|
ST_USERFS = "0"
|
|
|
|
# Boot artifacts to be copied from the deploy dir to the installer ZIP
|
|
BOOTABLE_ARTIFACTS = " \
|
|
${@oe.utils.ifelse(d.getVar('TRUSTFENCE_SIGN') == '1', 'tf-a-ccmp15-dvk-512MB-${BOOTSCHEME_DEFAULT}-nand${SIGN_SUFFIX}.stm32', \
|
|
'tf-a-ccmp15-dvk-512MB-${BOOTSCHEME_DEFAULT}-nand.stm32')} \
|
|
${@oe.utils.ifelse(d.getVar('TRUSTFENCE_SIGN') == '1', 'tf-a-ccmp15-dvk-1GB-${BOOTSCHEME_DEFAULT}-nand${SIGN_SUFFIX}.stm32', \
|
|
'tf-a-ccmp15-dvk-1GB-${BOOTSCHEME_DEFAULT}-nand.stm32')} \
|
|
metadata-ccmp15-dvk.bin \
|
|
${@oe.utils.ifelse(d.getVar('TRUSTFENCE_SIGN') == '1', 'fip-ccmp15-dvk-512MB-${BOOTSCHEME_DEFAULT}-nand${SIGN_SUFFIX}.bin', \
|
|
'fip-ccmp15-dvk-512MB-${BOOTSCHEME_DEFAULT}-nand.bin')} \
|
|
${@oe.utils.ifelse(d.getVar('TRUSTFENCE_SIGN') == '1', 'fip-ccmp15-dvk-1GB-${BOOTSCHEME_DEFAULT}-nand${SIGN_SUFFIX}.bin', \
|
|
'fip-ccmp15-dvk-1GB-${BOOTSCHEME_DEFAULT}-nand.bin')} \
|
|
"
|
|
|
|
# Default overlayfs_etc mount point and type
|
|
OVERLAYFS_ETC_MOUNT_POINT ?= "/mnt/data"
|
|
OVERLAYFS_ETC_DEVICE ?= "ubi1:data"
|
|
OVERLAYFS_ETC_FSTYPE ?= "ubifs"
|