358 lines
7.9 KiB
INI
358 lines
7.9 KiB
INI
# This file allows user to override the factory
|
|
|
|
# defaults for the WLAN Driver
|
|
|
|
|
|
# Enable/Disable Idle Scan
|
|
|
|
gEnableRxThread=1
|
|
|
|
gEnableIdleScan=0
|
|
|
|
|
|
# Increase sleep duration (seconds) during IMPS
|
|
# 0 implies no periodic wake up from IMPS. Periodic wakeup is
|
|
# unnecessary if Idle Scan is disabled.
|
|
gImpsModSleepTime=0
|
|
|
|
|
|
# Enable suspend or not
|
|
|
|
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
|
|
|
|
gEnableSuspend=3
|
|
|
|
|
|
# Phy Mode (auto, b, g, n, etc)
|
|
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
|
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
|
# 7 = 11b only 8 = 11ac only.
|
|
gDot11Mode=0
|
|
|
|
|
|
# CSR Roaming Enable(1) Disable(0)
|
|
|
|
gRoamingTime=0
|
|
|
|
|
|
# Assigned MAC Addresses - This will be used until NV items are in place
|
|
|
|
# Each byte of MAC address is represented in Hex format as XX
|
|
|
|
Intf0MacAddress=000AF58989FF
|
|
Intf1MacAddress=000AF58989FE
|
|
Intf2MacAddress=000AF58989FD
|
|
|
|
Intf3MacAddress=000AF58989FC
|
|
|
|
|
|
# UAPSD service interval for VO,VI, BE, BK traffic
|
|
|
|
InfraUapsdVoSrvIntv=0
|
|
|
|
InfraUapsdViSrvIntv=0
|
|
|
|
InfraUapsdBeSrvIntv=0
|
|
|
|
InfraUapsdBkSrvIntv=0
|
|
|
|
# Flag to allow STA send AddTspec even when ACM is Off
|
|
gAddTSWhenACMIsOff=1
|
|
|
|
# Make 1x1 the default antenna configuration
|
|
|
|
gNumRxAnt=1
|
|
|
|
|
|
# Beacon filtering frequency (unit in beacon intervals)
|
|
|
|
gNthBeaconFilter=50
|
|
|
|
|
|
# Flags to filter Mcast abd Bcast RX packets.
|
|
|
|
# Value 0: No filtering, 1: Filter all Multicast.
|
|
|
|
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
|
|
|
|
McastBcastFilter=3
|
|
|
|
|
|
#Flag to enable HostARPOffload feature or not
|
|
|
|
hostArpOffload=1
|
|
|
|
#Flag to enable HostNSOffload feature or not
|
|
|
|
hostNSOffload=1
|
|
|
|
#Enable OBSS protection
|
|
|
|
gEnableApOBSSProt=1
|
|
|
|
|
|
# RTS threshold
|
|
|
|
RTSThreshold=1048576
|
|
|
|
|
|
# DFS Master Capability
|
|
gEnableDFSMasterCap=1
|
|
|
|
# fast transition
|
|
ImplicitQosIsEnabled=0
|
|
|
|
gNeighborLookupThreshold=76
|
|
gNeighborReassocThreshold=81
|
|
|
|
#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
|
|
#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
|
|
#the RSSI of the new/roamable AP should be for roaming
|
|
RoamRssiDiff=3
|
|
|
|
# If the RSSI of any available candidate is better than currently associated
|
|
# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
|
|
# registering for reassoc threshold).
|
|
# NOTE: Value of 0 means that we would register for reassoc threshold.
|
|
gImmediateRoamRssiDiff=10
|
|
|
|
# SAP auto channel selection configuration
|
|
|
|
# 0 = disable auto channel selection
|
|
|
|
# 1 = enable auto channel selection, channel provided by supplicant will be ignored
|
|
|
|
gApAutoChannelSelection=0
|
|
|
|
|
|
# Listen Energy Detect Mode Configuration
|
|
|
|
# Valid values 0-128
|
|
|
|
# 128 means disable Energy Detect feature
|
|
|
|
# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
|
|
|
|
# 10-128 are reserved.
|
|
|
|
# The EDET threshold mapping is as follows in 3dB step:
|
|
|
|
# 0 = -60 dBm
|
|
|
|
# 1 = -63 dBm
|
|
|
|
# 2 = -66 dBm
|
|
|
|
# ...
|
|
|
|
# 7 = -81 dBm
|
|
|
|
# 8 = -84 dBm
|
|
|
|
# 9 = -87 dBm
|
|
|
|
# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
|
|
|
|
#
|
|
|
|
# Range Loss (dB) = EDET threshold level (dBm) + 97 dBm.
|
|
|
|
#
|
|
|
|
gEnablePhyAgcListenMode=128
|
|
|
|
|
|
#SOFTAP Channel Range selection
|
|
|
|
gAPChannelSelectStartChannel=1
|
|
|
|
gAPChannelSelectEndChannel=11
|
|
|
|
|
|
#SOFTAP Channel Range selection Operating band
|
|
|
|
# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
|
|
|
|
gAPChannelSelectOperatingBand=0
|
|
|
|
|
|
#Channel Bonding
|
|
gChannelBondingMode5GHz=1
|
|
|
|
|
|
#Enable Keep alive with non-zero period value
|
|
|
|
gStaKeepAlivePeriod = 30
|
|
|
|
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
|
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
|
|
#For both active and power save clients.
|
|
|
|
#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
|
|
#If doesn't honor for 5 seconds then DUT remove client.
|
|
|
|
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on
|
|
#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
|
|
#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
|
|
|
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
|
|
#where we send NULL frame.
|
|
|
|
#gApLinkMonitorPeriod = 10
|
|
|
|
#gGoLinkMonitorPeriod = 10
|
|
|
|
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
|
|
#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
|
|
|
|
|
|
gGoKeepAlivePeriod = 20
|
|
|
|
gApKeepAlivePeriod = 20
|
|
|
|
|
|
gEnableLogp=1
|
|
|
|
|
|
# 0 for OLPC 1 for CLPC and SCPC
|
|
gEnableCloseLoop=1
|
|
|
|
#Data Inactivity Timeout when in powersave (in ms)
|
|
gDataInactivityTimeout=200
|
|
|
|
# VHT Tx/Rx MCS values
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gVhtRxMCS=2
|
|
gVhtTxMCS=2
|
|
|
|
# VHT Tx/Rx MCS values for 2x2
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gEnable2x2=0
|
|
gVhtRxMCS2x2=2
|
|
gVhtTxMCS2x2=2
|
|
|
|
# Set txchainmask and rxchainmask
|
|
# These parameters are used only if gEnable2x2 is 0
|
|
# Valid values are 1,2
|
|
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
|
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
|
gSetTxChainmask1x1=1
|
|
gSetRxChainmask1x1=1
|
|
|
|
# 1=enable STBC; 0=disable STBC
|
|
gEnableRXSTBC=1
|
|
|
|
# 1=enable tx STBC; 0=disable
|
|
gEnableTXSTBC=1
|
|
|
|
# 1=enable rx LDPC; 0=disable
|
|
gEnableRXLDPC=1
|
|
|
|
#Enable Scan Results Aging based on timer
|
|
#Timer value is in seconds
|
|
#If Set to 0 it will not enable the feature
|
|
gScanAgingTime=0
|
|
|
|
#Enable Scan Results Aging based on number of scans
|
|
gScanResultAgeCount=1
|
|
|
|
#Enable thermal mitigation
|
|
gThermalMitigationEnable=0
|
|
|
|
#Thermal Mitigation Levels
|
|
gThermalTempMinLevel0=0
|
|
gThermalTempMaxLevel0=107
|
|
gThermalTempMinLevel1=105
|
|
gThermalTempMaxLevel1=117
|
|
gThermalTempMinLevel2=110
|
|
gThermalTempMaxLevel2=127
|
|
gThermalTempMinLevel3=115
|
|
gThermalTempMaxLevel3=0
|
|
|
|
#Maxium Channel time in msec
|
|
gMaxMediumTime = 6000
|
|
|
|
# 802.11K support
|
|
gRrmEnable=1
|
|
gRrmOperChanMax=8
|
|
gRrmNonOperChanMax=8
|
|
|
|
#Scan offload
|
|
gEnableDirectedScanOffload=1
|
|
|
|
#Enable Power Save offload
|
|
gEnablePowerSaveOffload=1
|
|
|
|
#Enable firmware log
|
|
gEnablefwlog=1
|
|
|
|
#P2P Listen offload
|
|
gEnableP2pListenOffload=1
|
|
|
|
# Maximum Receive AMPDU size (VHT only. Valid values: 0->8k 1->16k 2->32k 3->64k 4->128k)
|
|
gVhtAmpduLenExponent=7
|
|
|
|
# Maximum MPDU length (VHT only. Valid values: 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
|
gVhtMpduLen=2
|
|
|
|
# Maximum number of wow filters required
|
|
#gMaxWoWFilters=22
|
|
|
|
# WOW Enable/Disable.
|
|
# 0 - Disable both magic pattern match and pattern byte match.
|
|
# 1 - Enable magic pattern match on all interfaces.
|
|
# 2 - Enable pattern byte match on all interfaces.
|
|
# 3 - Enable both magic patter and pattern byte match on all interfaces.
|
|
# Default value of gEnableWoW is 3.
|
|
# gEnableWoW=0
|
|
|
|
#Enable or Disable p2p device address administered
|
|
isP2pDeviceAddrAdministrated=0
|
|
|
|
# Set Thermal Power limit
|
|
TxPower2g=10
|
|
TxPower5g=10
|
|
|
|
#Enable VHT on 2.4Ghz
|
|
gEnableVhtFor24GHzBand=1
|
|
|
|
#Enable or Disable 5G early beacon termination
|
|
gEnable5gEBT=1
|
|
|
|
ssdp = 0
|
|
|
|
#Enable Hysteretic mode
|
|
gEnableHystereticMode=1
|
|
|
|
# Bus bandwidth compute timeout value in ms
|
|
gBusBandwidthComputeInterval=2000
|
|
|
|
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
|
gRegulatoryChangeCountry=1
|
|
|
|
# Enable/Disable RX full reorder offload
|
|
gReorderOffloadSupported=1
|
|
|
|
#Set SAP max peer to 16 which allows 10 WEP connection
|
|
gSoftApMaxPeers=16
|
|
|
|
# Whether userspace country code setting shld have priority
|
|
gCountryCodePriority=1
|
|
|
|
# Enable(1)/Disable(0) SIFS burst
|
|
gEnableSifsBurst=1
|
|
|
|
# Enable or Disable Multi-user MIMO
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableMuBformee=1
|
|
|
|
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
|
gIbssTxSpEndInactivityTime=10
|
|
|
|
END
|
|
|
|
# Note: Configuration parser would not read anything past the END marker
|
|
|