65 lines
2.0 KiB
Plaintext
65 lines
2.0 KiB
Plaintext
#@TYPE: Machine
|
|
#@NAME: ConnectCore 8M Nano Development Kit.
|
|
#@DESCRIPTION: Machine configuration for Digi's ConnectCore 8M Nano DVK.
|
|
|
|
DIGI_SOM = "ccimx8mn"
|
|
MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:${DIGI_FAMILY}:${DIGI_SOM}:"
|
|
|
|
# Include the machine configuration for Digi's ConnectCore 8M module.
|
|
include conf/machine/include/ccimx8m.inc
|
|
|
|
BOOTLOADER_SEEK_USERDATA = "32"
|
|
BOOTLOADER_SEEK_BOOT = "0"
|
|
|
|
# U-Boot configurations
|
|
#
|
|
# At the moment config label should be "machine" because SDIMG_BOOTLOADER
|
|
# expects a boot artifact named after machine to create the sdcard image.
|
|
UBOOT_CONFIG ??= "ccimx8mn-dvk"
|
|
UBOOT_CONFIG[ccimx8mn-dvk] = "ccimx8mn_dvk_defconfig"
|
|
SPL_BINARY = "spl/u-boot-spl.bin"
|
|
|
|
# Set u-boot DTB
|
|
UBOOT_DTB_NAME = "ccimx8mn-dvk.dtb"
|
|
|
|
ATF_PLATFORM = "imx8mn"
|
|
IMX_BOOT_SOC_TARGET = "iMX8MN"
|
|
|
|
KERNEL_DEVICETREE ?= " \
|
|
digi/ccimx8mn-dvk.dtb \
|
|
digi/_ov_board_flexspi_ccimx8m-dvk.dtbo \
|
|
digi/_ov_board_gpio-watchdog_ccimx8m-dvk.dtbo \
|
|
digi/_ov_board_hsd101pfw2-lvds_ccimx8m-dvk.dtbo \
|
|
digi/_ov_board_lvds_ccimx8m-dvk.dtbo \
|
|
digi/_ov_board_user-leds_ccimx8m-dvk.dtbo \
|
|
digi/_ov_board_v1-v2_ccimx8mn-dvk.dtbo \
|
|
digi/_ov_som_bt_ccimx8m.dtbo \
|
|
digi/_ov_som_cm7_ccimx8mn.dtbo \
|
|
digi/_ov_som_mca-keypad_ccimx8m.dtbo \
|
|
digi/_ov_som_v1_ccimx8mn.dtbo \
|
|
digi/_ov_som_wifi_ccimx8m.dtbo \
|
|
"
|
|
|
|
SERIAL_CONSOLES ?= "115200;ttymxc0"
|
|
|
|
# Bluetooth tty
|
|
BT_TTY ?= "ttymxc1"
|
|
|
|
# XBees
|
|
XBEE_RESET_N_GPIO ?= "mca-gpio@15,gpio1@8"
|
|
XBEE_SLEEP_RQ_GPIO ?= "mca-gpio@11,gpio1@7"
|
|
XBEE_TTY ?= "ttymxc3"
|
|
|
|
# Image FS types
|
|
IMAGE_FSTYPES ?= '${@bb.utils.contains("IMAGE_FEATURES", "read-only-rootfs", \
|
|
"boot.vfat tar.bz2 recovery.vfat squashfs", \
|
|
"boot.vfat ext4.gz sdcard.gz tar.bz2 recovery.vfat", d)}'
|
|
|
|
# Boot artifacts to be copied from the deploy dir to the installer ZIP
|
|
BOOTABLE_ARTIFACTS = "imx-boot-ccimx8mn-dvk.bin"
|
|
|
|
# Default overlayfs_etc mount point and type
|
|
OVERLAYFS_ETC_MOUNT_POINT ?= "/mnt/data"
|
|
OVERLAYFS_ETC_DEVICE ?= "/dev/mmcblk0p7"
|
|
OVERLAYFS_ETC_FSTYPE ?= "ext4"
|