Digi
/
meta-digi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,685 Commits 3 Branches 0 Tags 196 MiB
C 32.9%
Shell 29%
BitBake 16.1%
TL-Verilog 9.9%
C++ 4.8%
Other 7.3%
Go to file
Mike Engel 85f84f6438 swupdate: move sw-description configuration into each platform. 
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 		2022-09-12 14:26:13 +02:00
meta-digi-arm swupdate: move sw-description configuration into each platform. 2022-09-12 14:26:13 +02:00
meta-digi-dey swupdate: move sw-description configuration into each platform. 2022-09-12 14:26:13 +02:00
scripts scripts: add dey-aws-tool script 2017-07-05 13:43:28 +02:00
sdk crank: add new crank image 2022-08-26 13:34:59 +02:00
README.md meta-digi: update README.md file for DEY-4.0 2022-07-20 16:55:31 +02:00

README.md

Digi Embedded Yocto (DEY) 4.0

Release 4.0-r1

This document provides information about Digi Embedded Yocto, Digi International's professional embedded Yocto development environment.

Digi Embedded Yocto 4.0 is based on the Yocto Project(TM) 4.0 (Kirkstone) release.

For a full list of supported features and interfaces please refer to the online documentation.

Tested OS versions

The current release has been verified and tested with the following OS versions:

  • Ubuntu 18.04

Supported Platforms

Software for the following hardware platforms is in production support:

ConnectCore 6UL

Installation

Digi Embedded Yocto is composed of a set of different Yocto layers that work in parallel. The layers are specified on a manifest file.

To install, please follow the instructions at the dey-manifest README

Documentation

Documentation is available online at https://www.digi.com/resources/documentation/digidocs/embedded/

Downloads

Release Changelog

4.0-r1

Known Issues and Limitations

This is a list of known issues and limitations at the time of release. An updated list can be found on the online documentation.

  • Firmware update
    • The software update package must be located in the root level of the update media (subfolders are not yet supported).
  • Cloud Connector
    • Remote file system management fails with long file names and paths (over 255 characters).
  • Wireless
    • Performance of the wireless interface is reduced when using concurrent mode, as the wireless interface is shared between several different functionalities.
    • When using wireless concurrent mode, Digi recommends you keep the different modes on the same frequency channels. For example, when configuring access point mode on channel 36 in the 5GHz band, connect to the same channel both in station mode and Wi-Fi direct so that the radio performance is optimized.
    • When working as an access point, DFS-capable channels in the 5GHz band are not supported.
    • For P2P connections Digi recommends "Negotiated GO" modes. The QCA6564 devices (ConnectCore 6UL, ConnectCore 6 Plus, and ConnectCore 8M Nano) fail to join autonomous groups.

ConnectCore 6UL

  • ConnectCore 6UL System-on-Module (SOM)
    • The UART connected to the Bluetooth chip on early versions of the ConnectCore 6UL system-on-module (hardware version < 4) cannot properly execute flow control. To work around this issue, UART1 of these SOM versions has been configured to operate at 115200 bps and without hardware flow control, reducing the maximum throughput of this interface.
    • The QCA6564 wireless chip does not support Wake On Wireless LAN.

Support Contact Information

For support questions please contact Digi Technical Support:

When you contact Digi Technical Support, include important system details and device information to help Digi resolve the issue more quickly.

  1. In the device, run the command 'sysinfo'. This generates the following file: /tmp/<current timestamp>.txt.gz.
  2. Attach the <current timestamp>.txt.gz file to your support ticket.