154 lines
4.3 KiB
Plaintext
154 lines
4.3 KiB
Plaintext
#
|
|
# U-Boot script for installing Linux images created by Yocto from the micro SD
|
|
# card into the NAND
|
|
#
|
|
|
|
echo "############################################################"
|
|
echo "# Linux firmware install from micro SD #"
|
|
echo "############################################################"
|
|
echo ""
|
|
echo " This process will erase your NAND and will install a new"
|
|
echo " U-Boot and Linux firmware images on the NAND."
|
|
echo ""
|
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
|
echo " to continue."
|
|
|
|
sleep 10
|
|
if test $? -eq 1; then
|
|
echo "Aborted by user.";
|
|
exit;
|
|
fi
|
|
|
|
# Determine U-Boot file to program basing on module variant
|
|
if test -n "${module_variant}"; then
|
|
if test "${module_variant}" = "0x02" || test "${module_variant}" = "0x03"; then
|
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc.imx;
|
|
elif test "${module_variant}" = "0x04"; then
|
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc1GB.imx;
|
|
fi
|
|
fi
|
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
|
# u-boot when the checked value is empty.
|
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
|
true;
|
|
else
|
|
echo "";
|
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
|
echo "";
|
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 6UL variant:";
|
|
echo " - For a SOM with 1GB DDR3, run:";
|
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc1GB.imx";
|
|
echo " - For a SOM with 256MB DDR3, run:";
|
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc.imx";
|
|
echo "";
|
|
echo "2. Run the install script again.";
|
|
echo "";
|
|
echo "Aborted";
|
|
echo "";
|
|
exit;
|
|
fi;
|
|
|
|
setenv INSTALL_MMCDEV 0
|
|
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6ulsbc.boot.ubifs
|
|
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6ulsbc.recovery.ubifs
|
|
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6ulsbc.ubifs
|
|
|
|
# Check for presence of firmware files on the SD card
|
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
|
if test ! -e mmc ${INSTALL_MMCDEV} ${install_f}; then
|
|
echo "ERROR: Could not find file ${install_f}";
|
|
install_abort=1;
|
|
fi;
|
|
done
|
|
if test -n "${install_abort}"; then
|
|
echo "Aborted.";
|
|
exit;
|
|
fi
|
|
|
|
# Skip user confirmation for U-Boot update
|
|
setenv forced_update 1
|
|
|
|
# Set bootdelay to zero so that firmware update is run immediately after
|
|
# the first reset.
|
|
setenv bootdelay 0
|
|
|
|
# Update U-Boot
|
|
echo ""
|
|
echo ""
|
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
|
echo ""
|
|
echo ""
|
|
update uboot mmc ${INSTALL_MMCDEV} fat ${INSTALL_UBOOT_FILENAME}
|
|
if test $? -eq 1; then
|
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
|
echo "";
|
|
echo "Aborted.";
|
|
exit;
|
|
fi
|
|
|
|
# Set 'bootcmd' to the second part of the script that will
|
|
# - Reset environment to defaults
|
|
# - Save the environment
|
|
# - Update the 'linux' partition
|
|
# - Update the 'recovery' partition
|
|
# - Update the 'rootfs' partition
|
|
# - Configure recovery to wipe 'update' partition
|
|
# - Run 'recovery' and let the system boot after
|
|
setenv bootcmd "
|
|
env default -a;
|
|
saveenv;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing Linux kernel and device tree files\";
|
|
echo \"\";
|
|
echo \"\";
|
|
nand erase.part linux;
|
|
update linux mmc ${INSTALL_MMCDEV} fat ${INSTALL_LINUX_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update linux partition!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing recovery\";
|
|
echo \"\";
|
|
echo \"\";
|
|
nand erase.part recovery;
|
|
update recovery mmc ${INSTALL_MMCDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update recovery partition!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing Linux root file system\";
|
|
echo \"\";
|
|
echo \"\";
|
|
nand erase.part rootfs;
|
|
update rootfs mmc ${INSTALL_MMCDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
echo \"\";
|
|
setenv boot_recovery yes;
|
|
setenv recovery_command wipe_update;
|
|
saveenv;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
|
echo \"\";
|
|
echo \"\";
|
|
sleep 1;
|
|
reset;
|
|
"
|
|
|
|
saveenv
|
|
reset
|