112 lines
3.5 KiB
Plaintext
112 lines
3.5 KiB
Plaintext
#
|
|
# U-Boot bootscript for EMMC/SD images created by Yocto.
|
|
#
|
|
|
|
# As the first step in the boot script, check if we are using DualBoot. This
|
|
# requires the script to change some variables and save them, while the rest
|
|
# of the script changes variables only temporarily without saving them.
|
|
|
|
# Dual boot verification
|
|
if test "${dualboot}" = "yes"; then
|
|
if test "${active_system}" = "linux_a"; then
|
|
echo "Booting from system A (try ${bootcount})"
|
|
part number mmc ${mmcbootdev} linux_a tmp_mmcpart
|
|
part number mmc ${mmcbootdev} rootfs_a tmp_rootfs_index
|
|
else
|
|
echo "Booting from system B (try ${bootcount})"
|
|
part number mmc ${mmcbootdev} linux_b tmp_mmcpart
|
|
part number mmc ${mmcbootdev} rootfs_b tmp_rootfs_index
|
|
fi
|
|
part uuid mmc ${mmcbootdev}:${tmp_rootfs_index} tmp_mmcroot
|
|
if test "${mmcpart}" -ne "${tmp_mmcpart}"; then
|
|
setexpr mmcpart ${tmp_mmcpart}
|
|
env_save_needed="1"
|
|
fi
|
|
if test "${mmcroot}" != "PARTUUID=${tmp_mmcroot}"; then
|
|
setenv mmcroot PARTUUID=${tmp_mmcroot}
|
|
env_save_needed="1"
|
|
fi
|
|
if test "${env_save_needed}" = "1"; then
|
|
env delete tmp_mmcpart tmp_rootfs_index tmp_mmcroot
|
|
env save
|
|
fi
|
|
else
|
|
echo "Booting system (try ${bootcount})"
|
|
# Get the UUID of the configured boot partition.
|
|
part uuid mmc ${mmcbootdev}:${mmcpart} bootpart
|
|
# Check the boot source.
|
|
if test "${bootpart}" = "${part1_uuid}"; then
|
|
# We are booting from the eMMC using 'linux'.
|
|
true
|
|
elif test "${bootpart}" = "${part2_uuid}"; then
|
|
# We are booting from the eMMC using 'recovery'.
|
|
setenv boot_initrd true
|
|
setenv initrd_file uramdisk-recovery.img
|
|
else
|
|
# We are booting from the SD card.
|
|
setenv mmcroot /dev/mmcblk${mmcbootdev}p2
|
|
fi
|
|
fi
|
|
|
|
|
|
# Back up environment variables
|
|
setenv ORIG_overlays ${overlays}
|
|
setenv ORIG_extra_bootargs ${extra_bootargs}
|
|
|
|
# Set SOC type to "imx8qxp" if not already defined by U-Boot
|
|
if test ! -n "${soc_type}"; then
|
|
setenv soc_type "imx8qxp"
|
|
fi
|
|
|
|
#
|
|
# Determine overlays to apply depending on the hardware capabilities
|
|
# described by the HWID, SOM version, and carrier board version.
|
|
#
|
|
if test -n "${module_ram}"; then
|
|
setexpr module_has_wifi ${hwid_3} \& 1
|
|
setexpr module_has_bt ${hwid_3} \& 2
|
|
setexpr module_has_bt ${module_has_bt} / 2
|
|
|
|
if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
|
|
setenv overlays _ov_som_bt_ccimx8x.dtbo,${overlays}
|
|
fi
|
|
|
|
if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
|
|
setenv overlays _ov_som_wifi_ccimx8x.dtbo,${overlays}
|
|
fi
|
|
else
|
|
#
|
|
# Set overlays depending on the hardware variant
|
|
#
|
|
if test "${module_variant}" = "0x01"; then
|
|
setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
|
|
elif test "${module_variant}" = "0x02"; then
|
|
setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
|
|
elif test "${module_variant}" = "0x04"; then
|
|
setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
|
|
fi
|
|
fi
|
|
|
|
# Apply QXP overlay if the SOC type is "imx8qxp"
|
|
if test "${soc_type}" = "imx8qxp"; then
|
|
setenv overlays _ov_som_quad_ccimx8x.dtbo,${overlays}
|
|
fi
|
|
|
|
# Apply SBCv3 overlay if the board_version is 3 or lesser
|
|
if test "${board_version}" -le "3"; then
|
|
setenv overlays _ov_board_v1-v3_ccimx8x-sbc-pro.dtbo,${overlays}
|
|
fi
|
|
|
|
setenv extra_bootargs fbcon=logo-pos:center fbcon=logo-count:1 ${extra_bootargs}
|
|
dboot linux mmc ${mmcbootdev}:${mmcpart}
|
|
|
|
|
|
|
|
# We only get here in case of an error on the dboot command.
|
|
|
|
# Undo changes to environment variables
|
|
setenv overlays ${ORIG_overlays}
|
|
setenv ORIG_overlays
|
|
setenv extra_bootargs ${ORIG_extra_bootargs}
|
|
setenv ORIG_extra_bootargs
|