97 lines
3.0 KiB
Plaintext
97 lines
3.0 KiB
Plaintext
#
|
|
# U-Boot bootscript for EMMC/SD images created by Yocto.
|
|
#
|
|
|
|
# As the first step in the boot script, check if we are using DualBoot. This
|
|
# requires the script to change some variables and save them, while the rest
|
|
# of the script changes variables only temporarily without saving them.
|
|
|
|
# Pre step: check if we boot from uSD.
|
|
if test "${mmcbootdev}" = "1"; then
|
|
# We are booting from the SD card.
|
|
setenv mmcroot /dev/mmcblk${mmcbootdev}p2
|
|
elif test "${dualboot}" = "yes"; then
|
|
if test "${active_system}" = "linux_a"; then
|
|
echo "Booting from system A (try ${bootcount})"
|
|
part number mmc ${mmcbootdev} linux_a tmp_mmcpart
|
|
part number mmc ${mmcbootdev} rootfs_a tmp_rootfs_index
|
|
else
|
|
echo "Booting from system B (try ${bootcount})"
|
|
part number mmc ${mmcbootdev} linux_b tmp_mmcpart
|
|
part number mmc ${mmcbootdev} rootfs_b tmp_rootfs_index
|
|
fi
|
|
part uuid mmc ${mmcbootdev}:${tmp_rootfs_index} tmp_mmcroot
|
|
if test "${mmcpart}" -ne "${tmp_mmcpart}"; then
|
|
setexpr mmcpart ${tmp_mmcpart}
|
|
env_save_needed="1"
|
|
fi
|
|
if test "${mmcroot}" != "PARTUUID=${tmp_mmcroot}"; then
|
|
setenv mmcroot PARTUUID=${tmp_mmcroot}
|
|
env_save_needed="1"
|
|
fi
|
|
if test "${env_save_needed}" = "1"; then
|
|
env delete tmp_mmcpart tmp_rootfs_index tmp_mmcroot
|
|
env save
|
|
fi
|
|
else
|
|
echo "Booting system (try ${bootcount})"
|
|
# Get the UUID of the configured boot partition.
|
|
part uuid mmc ${mmcbootdev}:${mmcpart} bootpart
|
|
# Check the boot source.
|
|
if test "${bootpart}" = "${part1_uuid}"; then
|
|
# We are booting from the eMMC using 'linux'.
|
|
true
|
|
elif test "${bootpart}" = "${part2_uuid}"; then
|
|
# We are booting from the eMMC using 'recovery'.
|
|
setenv boot_initrd true
|
|
setenv initrd_file uramdisk-recovery.img
|
|
fi
|
|
fi
|
|
|
|
# Back up environment variables
|
|
setenv ORIG_overlays ${overlays}
|
|
|
|
#
|
|
# Determine overlays to apply depending on the hardware capabilities
|
|
# described by the HWID, SOM version, and carrier board version.
|
|
#
|
|
setexpr module_has_mca ${hwid_2} \& 10000
|
|
setexpr module_has_mca ${module_has_mca} / 10000
|
|
setexpr module_has_wifi ${hwid_2} \& 20000
|
|
setexpr module_has_wifi ${module_has_wifi} / 20000
|
|
setexpr module_has_bt ${hwid_2} \& 40000
|
|
setexpr module_has_bt ${module_has_bt} / 40000
|
|
|
|
if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
|
|
setenv overlays _ov_som_bt_ccimx93.dtbo,${overlays}
|
|
fi
|
|
|
|
if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
|
|
setenv overlays _ov_som_wifi_ccimx93.dtbo,${overlays}
|
|
fi
|
|
|
|
if test "${module_has_mca}" = "1" && test -z "${disable_mca}"; then
|
|
setenv overlays _ov_som_mca_ccimx93.dtbo,${overlays}
|
|
fi
|
|
|
|
if test "${cpu_type}" = "imx9352" || \
|
|
test "${cpu_type}" = "imx9351" || \
|
|
test "${cpu_type}" = "imx9322" || \
|
|
test "${cpu_type}" = "imx9321"; then
|
|
module_has_npu="1"
|
|
fi
|
|
|
|
if test "${module_has_npu}" = "1" && test -z "${disable_npu}"; then
|
|
setenv overlays _ov_som_npu_ccimx93.dtbo,${overlays}
|
|
fi
|
|
|
|
dboot linux mmc ${mmcbootdev}:${mmcpart}
|
|
|
|
#
|
|
# Undo changes to environment variables
|
|
#
|
|
# (we only get here in case of an error on the dboot command)
|
|
#
|
|
setenv overlays ${ORIG_overlays}
|
|
setenv ORIG_overlays
|