Digi
/
meta-digi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
meta-digi/meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0006-Remove-unnecessary-cod...

471 lines
15 KiB
Diff
Raw Blame History

From: Gabriel Valcazar <gabriel.valcazar@digi.com>
Date: Thu, 31 Oct 2019 16:15:30 +0100
Subject: [PATCH 6/6] Remove unnecessary code from cryptoauth_test
Some test commands apply to chips other than the ATECC508A, and can cause
errors when used incorrectly. Remove all code that doesn't apply to our
platforms.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
---
test/cmd-processor.c | 360 ++-------------------------------------------------
1 file changed, 12 insertions(+), 348 deletions(-)
diff --git a/test/cmd-processor.c b/test/cmd-processor.c
index c0f819f..07ecf2a 100644
--- a/test/cmd-processor.c
+++ b/test/cmd-processor.c
@@ -61,13 +61,8 @@ static void lock_config(void);
static void lock_data(void);
static void info(void);
static void sernum(void);
-static void discover(void);
static void select_device(ATCADeviceType device_type);
static int run_test(void* fptest);
-static void select_204(void);
-static void select_108(void);
-static void select_508(void);
-static void select_608(void);
static void run_basic_tests(void);
static void run_unit_tests(void);
static void run_otpzero_tests(void);
@@ -75,10 +70,6 @@ static void run_helper_tests(void);
static void help(void);
static int parse_cmd(const char *command);
static void run_all_tests(void);
-static ATCA_STATUS set_chip_mode(uint8_t i2c_user_extra_add, uint8_t ttl_enable, uint8_t watchdog, uint8_t clock_divider);
-static void set_clock_divider_m0(void);
-static void set_clock_divider_m1(void);
-static void set_clock_divider_m2(void);
static void tng22_tests(void);
static void tngtn_tests(void);
@@ -87,11 +78,6 @@ static const char* argv[] = { "manual", "-v" };
static t_menu_info mas_menu_info[] =
{
{ "help", "Display Menu", help },
- { "discover", "Discover Buses and Devices", discover },
- { "204", "Set Target Device to ATSHA204A", select_204 },
- { "108", "Set Target Device to ATECC108A", select_108 },
- { "508", "Set Target Device to ATECC508A", select_508 },
- { "608", "Set Target Device to ATECC608A", select_608 },
{ "info", "Get the Chip Revision", info },
{ "sernum", "Get the Chip Serial Number", sernum },
{ "rand", "Generate Some Random Numbers", (fp_menu_handler)do_randoms },
@@ -107,9 +93,6 @@ static t_menu_info mas_menu_info[] =
{ "unit", "Run Unit Test on Selected Device", run_unit_tests },
{ "otpzero", "Zero Out OTP Zone", run_otpzero_tests },
{ "util", "Run Helper Function Tests", run_helper_tests },
- { "clkdivm0", "Set ATECC608A to ClockDivider M0(0x00)", set_clock_divider_m0 },
- { "clkdivm1", "Set ATECC608A to ClockDivider M1(0x05)", set_clock_divider_m1 },
- { "clkdivm2", "Set ATECC608A to ClockDivider M2(0x0D)", set_clock_divider_m2 },
#endif
#ifndef DO_NOT_TEST_CERT
{ "cd", "Run Unit Tests on Cert Data", (fp_menu_handler)certdata_unit_tests },
@@ -130,6 +113,8 @@ int main(int argc, char* argv[])
{
char buffer[1024];
+ select_device(ATECC508A);
+
while (true)
{
printf("$ ");
@@ -202,101 +187,13 @@ static void help(void)
}
}
-static void select_204(void)
-{
- select_device(ATSHA204A);
-}
-static void select_108(void)
-{
- select_device(ATECC108A);
-}
-static void select_508(void)
-{
- select_device(ATECC508A);
-}
-static void select_608(void)
-{
- select_device(ATECC608A);
-}
-
-static void update_chip_mode(uint8_t* chip_mode, uint8_t i2c_user_extra_add, uint8_t ttl_enable, uint8_t watchdog, uint8_t clock_divider)
-{
- if (i2c_user_extra_add != 0xFF)
- {
- *chip_mode &= ~ATCA_CHIPMODE_I2C_ADDRESS_FLAG;
- *chip_mode |= i2c_user_extra_add & ATCA_CHIPMODE_I2C_ADDRESS_FLAG;
- }
- if (ttl_enable != 0xFF)
- {
- *chip_mode &= ~ATCA_CHIPMODE_TTL_ENABLE_FLAG;
- *chip_mode |= ttl_enable & ATCA_CHIPMODE_TTL_ENABLE_FLAG;
- }
- if (watchdog != 0xFF)
- {
- *chip_mode &= ~ATCA_CHIPMODE_WATCHDOG_MASK;
- *chip_mode |= watchdog & ATCA_CHIPMODE_WATCHDOG_MASK;
- }
- if (clock_divider != 0xFF)
- {
- *chip_mode &= ~ATCA_CHIPMODE_CLOCK_DIV_MASK;
- *chip_mode |= clock_divider & ATCA_CHIPMODE_CLOCK_DIV_MASK;
- }
-}
-
-static ATCA_STATUS check_clock_divider(void)
-{
- ATCA_STATUS status;
- uint8_t chip_mode = 0;
-
- if (gCfg->devtype != ATECC608A)
- {
- printf("Current device doesn't support clock divider settings (only ATECC608A)\r\n");
- return ATCA_GEN_FAIL;
- }
-
- // Update the actual ATECC608A chip mode so it takes effect immediately
- status = atcab_init(gCfg);
- if (status != ATCA_SUCCESS)
- {
- printf("atcab_init() failed with ret=0x%08X\r\n", status);
- return status;
- }
-
- do
- {
- // Read current config values
- status = atcab_read_bytes_zone(ATCA_ZONE_CONFIG, 0, ATCA_CHIPMODE_OFFSET, &chip_mode, 1);
- if (status != ATCA_SUCCESS)
- {
- printf("atcab_read_bytes_zone() failed with ret=0x%08X\r\n", status);
- break;
- }
-
- // Update the ATECC608A test config data so all the unit tests will run with the new chip mode
- update_chip_mode(&test_ecc608_configdata[ATCA_CHIPMODE_OFFSET], 0xFF, 0xFF, chip_mode & ATCA_CHIPMODE_WATCHDOG_MASK, chip_mode & ATCA_CHIPMODE_CLOCK_DIV_MASK);
-
- }
- while (0);
-
- atcab_release();
- return status;
-}
-
static void run_basic_tests(void)
{
- if (gCfg->devtype == ATECC608A)
- {
- check_clock_divider();
- }
run_test(RunAllBasicTests);
}
static void run_unit_tests(void)
{
- if (gCfg->devtype == ATECC608A)
- {
- check_clock_divider();
- }
run_test(RunAllFeatureTests);
}
static void run_otpzero_tests(void)
@@ -431,38 +328,6 @@ static ATCA_STATUS do_randoms(void)
return status;
}
-
-static void discover(void)
-{
- ATCAIfaceCfg ifaceCfgs[10];
- int i;
- const char *devname[] = { "ATSHA204A", "ATECC108A", "ATECC508A", "ATECC608A" }; // indexed by ATCADeviceType
-
- for (i = 0; i < (int)(sizeof(ifaceCfgs) / sizeof(ATCAIfaceCfg)); i++)
- {
- ifaceCfgs[i].devtype = ATCA_DEV_UNKNOWN;
- ifaceCfgs[i].iface_type = ATCA_UNKNOWN_IFACE;
- }
-
- printf("Searching...\r\n");
- atcab_cfg_discover(ifaceCfgs, sizeof(ifaceCfgs) / sizeof(ATCAIfaceCfg));
- for (i = 0; i < (int)(sizeof(ifaceCfgs) / sizeof(ATCAIfaceCfg)); i++)
- {
- if (ifaceCfgs[i].devtype != ATCA_DEV_UNKNOWN)
- {
- printf("Found %s ", devname[ifaceCfgs[i].devtype]);
- if (ifaceCfgs[i].iface_type == ATCA_I2C_IFACE)
- {
- printf("@ bus %d addr %02x", ifaceCfgs[i].atcai2c.bus, ifaceCfgs[i].atcai2c.slave_address);
- }
- if (ifaceCfgs[i].iface_type == ATCA_SWI_IFACE)
- {
- printf("@ bus %d", ifaceCfgs[i].atcaswi.bus);
- }
- printf("\r\n");
- }
- }
-}
static void info(void)
{
ATCA_STATUS status;
@@ -640,18 +505,7 @@ static ATCA_STATUS get_serial_no(uint8_t *sernum)
static void select_device(ATCADeviceType device_type)
{
- ATCA_STATUS status;
-
- status = set_test_config(device_type);
-
- if (status == ATCA_SUCCESS)
- {
- printf("Device Selected.\r\n");
- }
- else
- {
- printf("IFace Cfg are NOT available\r\n");
- }
+ set_test_config(device_type);
}
static int run_test(void* fptest)
@@ -674,11 +528,6 @@ static void run_all_tests(void)
bool is_data_locked = false;
int fails = 0;
- if (gCfg->devtype == ATECC608A)
- {
- check_clock_divider();
- }
-
info();
sernum();
do_randoms();
@@ -826,212 +675,27 @@ static ATCA_STATUS set_test_config(ATCADeviceType deviceType)
gCfg->devtype = ATCA_DEV_UNKNOWN;
gCfg->iface_type = ATCA_UNKNOWN_IFACE;
- switch (deviceType)
- {
- case ATSHA204A:
-#if defined(ATCA_HAL_I2C)
- *gCfg = cfg_atsha204a_i2c_default;
-#elif defined(ATCA_HAL_SWI)
- *gCfg = cfg_atsha204a_swi_default;
-#elif defined(ATCA_HAL_KIT_HID)
- *gCfg = cfg_atsha204a_kithid_default;
-#elif defined(ATCA_HAL_KIT_CDC)
- *gCfg = cfg_atsha204a_kitcdc_default;
-#elif defined(ATCA_HAL_CUSTOM)
- *gCfg = g_cfg_atsha204a_custom;
-#else
-#error "HAL interface is not selected";
-#endif
- break;
-
- case ATECC108A:
#if defined(ATCA_HAL_I2C)
- *gCfg = cfg_ateccx08a_i2c_default;
- gCfg->devtype = deviceType;
+ *gCfg = cfg_ateccx08a_i2c_default;
+ gCfg->devtype = deviceType;
#elif defined(ATCA_HAL_SWI)
- *gCfg = cfg_ateccx08a_swi_default;
- gCfg->devtype = deviceType;
+ *gCfg = cfg_ateccx08a_swi_default;
+ gCfg->devtype = deviceType;
#elif defined(ATCA_HAL_KIT_HID)
- *gCfg = cfg_ateccx08a_kithid_default;
- gCfg->devtype = deviceType;
+ *gCfg = cfg_ateccx08a_kithid_default;
+ gCfg->devtype = deviceType;
#elif defined(ATCA_HAL_KIT_CDC)
- *gCfg = cfg_ateccx08a_kitcdc_default;
- gCfg->devtype = deviceType;
+ *gCfg = cfg_ateccx08a_kitcdc_default;
+ gCfg->devtype = deviceType;
#elif defined(ATCA_HAL_CUSTOM)
- *gCfg = g_cfg_atecc108a_custom;
+ *gCfg = g_cfg_atecc508a_custom;
#else
#error "HAL interface is not selected";
#endif
- break;
-
- case ATECC508A:
-#if defined(ATCA_HAL_I2C)
- *gCfg = cfg_ateccx08a_i2c_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_SWI)
- *gCfg = cfg_ateccx08a_swi_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_KIT_HID)
- *gCfg = cfg_ateccx08a_kithid_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_KIT_CDC)
- *gCfg = cfg_ateccx08a_kitcdc_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_CUSTOM)
- *gCfg = g_cfg_atecc508a_custom;
-#else
-#error "HAL interface is not selected";
-#endif
- break;
-
- case ATECC608A:
-#if defined(ATCA_HAL_I2C)
- *gCfg = cfg_ateccx08a_i2c_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_SWI)
- *gCfg = cfg_ateccx08a_swi_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_KIT_HID)
- *gCfg = cfg_ateccx08a_kithid_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_KIT_CDC)
- *gCfg = cfg_ateccx08a_kitcdc_default;
- gCfg->devtype = deviceType;
-#elif defined(ATCA_HAL_CUSTOM)
- *gCfg = g_cfg_atecc608a_custom;
-#else
-#error "HAL interface is not selected";
-#endif
- break;
-
- default:
- //device type wasn't found, return with error
- return ATCA_GEN_FAIL;
- }
-
- #ifdef ATCA_RASPBERRY_PI_3
- gCfg->atcai2c.bus = 1;
- #endif
return ATCA_SUCCESS;
}
-static ATCA_STATUS set_chip_mode(uint8_t i2c_user_extra_add, uint8_t ttl_enable, uint8_t watchdog, uint8_t clock_divider)
-{
- ATCA_STATUS status;
- uint8_t config_word[ATCA_WORD_SIZE];
- bool is_config_locked = false;
-
- if (gCfg->devtype != ATECC608A)
- {
- printf("Current device doesn't support clock divider settings (only ATECC608A)\r\n");
- return ATCA_GEN_FAIL;
- }
-
- status = is_device_locked(LOCK_ZONE_CONFIG, &is_config_locked);
- if (status != ATCA_SUCCESS)
- {
- printf("is_device_locked() failed with ret=0x%08X\r\n", status);
- return status;
- }
-
- if (is_config_locked)
- {
- printf("Current device is config locked. Can't change clock divider. ");
- }
-
- // Update the actual ATECC608A chip mode so it takes effect immediately
- status = atcab_init(gCfg);
- if (status != ATCA_SUCCESS)
- {
- printf("atcab_init() failed with ret=0x%08X\r\n", status);
- return status;
- }
-
- do
- {
- // Read current config values
- status = atcab_read_bytes_zone(ATCA_ZONE_CONFIG, 0, 16, config_word, 4);
- if (status != ATCA_SUCCESS)
- {
- printf("atcab_read_bytes_zone() failed with ret=0x%08X\r\n", status);
- break;
- }
-
- if (is_config_locked)
- {
- printf("Currently set to 0x%02X.\r\n", (int)(config_word[3] >> 3));
- status = ATCA_GEN_FAIL;
- break;
- }
-
- // Update ChipMode
- update_chip_mode(&config_word[3], i2c_user_extra_add, ttl_enable, watchdog, clock_divider);
-
- // Write config values back to chip
- status = atcab_write_bytes_zone(ATCA_ZONE_CONFIG, 0, 16, config_word, 4);
- if (status != ATCA_SUCCESS)
- {
- printf("atcab_write_bytes_zone() failed with ret=0x%08X\r\n", status);
- break;
- }
-
- // Put to sleep so new values take effect
- status = atcab_wakeup();
- if (status != ATCA_SUCCESS)
- {
- printf("atcab_wakeup() failed with ret=0x%08X\r\n", status);
- break;
- }
- status = atcab_sleep();
- if (status != ATCA_SUCCESS)
- {
- printf("atcab_sleep() failed with ret=0x%08X\r\n", status);
- break;
- }
-
- // Update the ATECC608A test config data so all the unit tests will run with the new chip mode
- update_chip_mode(&test_ecc608_configdata[ATCA_CHIPMODE_OFFSET], i2c_user_extra_add, ttl_enable, watchdog, clock_divider);
-
- }
- while (0);
-
- atcab_release();
- return status;
-}
-
-static void set_clock_divider_m0(void)
-{
- ATCA_STATUS status = set_chip_mode(0xFF, 0xFF, ATCA_CHIPMODE_WATCHDOG_SHORT, ATCA_CHIPMODE_CLOCK_DIV_M0);
-
- if (status == ATCA_SUCCESS)
- {
- printf("Set device to clock divider M0 (0x%02X) and watchdog to 1.3s nominal.\r\n", ATCA_CHIPMODE_CLOCK_DIV_M0 >> 3);
- }
-}
-
-static void set_clock_divider_m1(void)
-{
- ATCA_STATUS status = set_chip_mode(0xFF, 0xFF, ATCA_CHIPMODE_WATCHDOG_SHORT, ATCA_CHIPMODE_CLOCK_DIV_M1);
-
- if (status == ATCA_SUCCESS)
- {
- printf("Set device to clock divider M1 (0x%02X) and watchdog to 1.3s nominal.\r\n", ATCA_CHIPMODE_CLOCK_DIV_M1 >> 3);
- }
-}
-
-static void set_clock_divider_m2(void)
-{
- // Additionally set watchdog to long settings (~13s) as some commands
- // can't complete in time on the faster watchdog setting.
- ATCA_STATUS status = set_chip_mode(0xFF, 0xFF, ATCA_CHIPMODE_WATCHDOG_LONG, ATCA_CHIPMODE_CLOCK_DIV_M2);
-
- if (status == ATCA_SUCCESS)
- {
- printf("Set device to clock divider M2 (0x%02X) and watchdog to 13s nominal.\r\n", ATCA_CHIPMODE_CLOCK_DIV_M2 >> 3);
- }
-}
-
static void tng22_tests(void)
{
ATCA_STATUS status;
Reference in New Issue View Git Blame Copy Permalink