66 lines
1.8 KiB
Plaintext
66 lines
1.8 KiB
Plaintext
#@TYPE: Machine
|
|
#@NAME: ConnectCore 8M Nano Development Kit.
|
|
#@DESCRIPTION: Machine configuration for Digi's ConnectCore 8M Nano DVK.
|
|
|
|
DIGI_SOM = "ccimx8mn"
|
|
MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:${DIGI_FAMILY}:${DIGI_SOM}:"
|
|
|
|
# Include the machine configuration for Digi's ConnectCore 8M module.
|
|
include conf/machine/include/ccimx8m.inc
|
|
|
|
BOOTLOADER_SEEK_USERDATA = "32"
|
|
|
|
# U-Boot configurations
|
|
#
|
|
# At the moment config label should be "machine" because SDIMG_BOOTLOADER
|
|
# expects a boot artifact named after machine to create the sdcard image.
|
|
UBOOT_CONFIG ??= "ccimx8mn-dvk"
|
|
UBOOT_CONFIG[ccimx8mn-dvk] = "ccimx8mn_dvk_defconfig"
|
|
SPL_BINARY = "spl/u-boot-spl.bin"
|
|
|
|
# Set u-boot DTB
|
|
UBOOT_DTB_NAME = "ccimx8mn-dvk.dtb"
|
|
|
|
# Index of USB device for installer
|
|
UBOOT_INSTALL_USB_INDEX = "0"
|
|
# Index of microSD device for installer
|
|
UBOOT_INSTALL_SD_INDEX = "1"
|
|
|
|
ATF_PLATFORM = "imx8mn"
|
|
IMX_BOOT_SOC_TARGET = "iMX8MN"
|
|
IMX_BOOT_SEEK = "32"
|
|
|
|
KERNEL_DEVICETREE ?= " \
|
|
digi/ccimx8m_bt.dtbo \
|
|
digi/ccimx8mn_cm7.dtbo \
|
|
digi/ccimx8m_mca-keypad.dtbo \
|
|
digi/ccimx8mn_v1.dtbo \
|
|
digi/ccimx8m_wifi.dtbo \
|
|
digi/ccimx8m-dvk_flexspi.dtbo \
|
|
digi/ccimx8m-dvk_gpio-watchdog.dtbo \
|
|
digi/ccimx8m-dvk_hsd101pfw2-lvds.dtbo \
|
|
digi/ccimx8m-dvk_lvds.dtbo \
|
|
digi/ccimx8m-dvk_user-leds.dtbo \
|
|
digi/ccimx8mn-dvk_v1-v2.dtbo \
|
|
digi/ccimx8mn-dvk.dtb \
|
|
"
|
|
FIT_CONF_DEFAULT_DTB = "ccimx8mn-dvk.dtb"
|
|
|
|
SERIAL_CONSOLES ?= "115200;ttymxc0"
|
|
|
|
# Bluetooth tty
|
|
BT_TTY ?= "ttymxc1"
|
|
|
|
# XBees
|
|
XBEE_RESET_N_GPIO ?= "mca-gpio@15,gpio1@8"
|
|
XBEE_SLEEP_RQ_GPIO ?= "mca-gpio@11,gpio1@7"
|
|
XBEE_TTY ?= "ttymxc3"
|
|
|
|
# Boot artifacts to be copied from the deploy dir to the installer ZIP
|
|
BOOTABLE_ARTIFACTS = "imx-boot##SIGNED##-ccimx8mn-dvk.bin"
|
|
|
|
# Default overlayfs_etc mount point and type
|
|
OVERLAYFS_ETC_MOUNT_POINT ?= "/mnt/data"
|
|
OVERLAYFS_ETC_DEVICE ?= "/dev/mmcblk0p7"
|
|
OVERLAYFS_ETC_FSTYPE ?= "ext4"
|