277 lines
8.3 KiB
Plaintext
277 lines
8.3 KiB
Plaintext
#
|
|
# U-Boot script for installing Linux images created by Yocto from the SD
|
|
# card into the eMMC
|
|
#
|
|
|
|
# Reset temp variables
|
|
install_abort=0
|
|
BASEFILENAME=0
|
|
|
|
# Determine U-Boot file to program basing on module variant
|
|
if test -n "${module_variant}"; then
|
|
if test "${module_variant}" = "0x12"; then
|
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc2GB.imx;
|
|
elif test "${module_variant}" = "0x02" || test "${module_variant}" = "0x04" || test "${module_variant}" = "0x05" || test "${module_variant}" = "0x11" || test "${module_variant}" = "0x14" || test "${module_variant}" = "0x16"; then
|
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc.imx;
|
|
elif test "${module_variant}" = "0x03" || test "${module_variant}" = "0x0e" || test "${module_variant}" = "0x0f"; then
|
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc512MB.imx;
|
|
elif test "${module_variant}" = "0x0b" || test "${module_variant}" = "0x15"; then
|
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc.imx;
|
|
elif test "${module_variant}" = "0x0c" || test "${module_variant}" = "0x13"; then
|
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc512MB.imx;
|
|
fi
|
|
fi
|
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
|
# u-boot when the checked value is empty.
|
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
|
true;
|
|
else
|
|
echo "";
|
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
|
echo "";
|
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 6 variant:";
|
|
echo " - For a Quad/Dual CPU with 2GB DDR3, run:";
|
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc2GB.imx";
|
|
echo " - For a Quad/Dual CPU with 1GB DDR3, run:";
|
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc.imx";
|
|
echo " - For a Quad/Dual CPU with 512MB DDR3, run:";
|
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc512MB.imx";
|
|
echo " - For a DualLite/Solo CPU with 1GB DDR3, run:";
|
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc.imx";
|
|
echo " - For a DualLite/Solo CPU with 512MB DDR3, run:";
|
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc512MB.imx";
|
|
echo "";
|
|
echo "2. Run the install script again.";
|
|
echo "";
|
|
echo "Aborted";
|
|
echo "";
|
|
exit;
|
|
fi;
|
|
|
|
setenv INSTALL_MMCDEV 1
|
|
|
|
if test -z "${image-name}"; then
|
|
setenv image-name ##DEFAULT_IMAGE_NAME##
|
|
fi
|
|
GRAPHICAL_IMAGES="##GRAPHICAL_IMAGES##"
|
|
for g in ${GRAPHICAL_IMAGES}; do
|
|
if test "${image-name}" = "${g}"; then
|
|
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
|
fi
|
|
done
|
|
if test "${BASEFILENAME}" = "0"; then
|
|
BASEFILENAME="${image-name}"
|
|
fi
|
|
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
|
setenv INSTALL_RECOVERY_FILENAME ${BASEFILENAME}-##MACHINE##.recovery.vfat
|
|
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.ext4
|
|
|
|
# Check for presence of firmware files on the SD card
|
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
|
if test ! -e mmc ${INSTALL_MMCDEV} ${install_f}; then
|
|
echo "ERROR: Could not find file ${install_f}";
|
|
install_abort=1;
|
|
fi;
|
|
done
|
|
if test "${install_abort}" = "1"; then
|
|
echo "Aborted.";
|
|
exit;
|
|
fi
|
|
|
|
echo "############################################################"
|
|
echo "# Linux firmware install from micro SD #"
|
|
echo "############################################################"
|
|
echo ""
|
|
echo " This process will erase your eMMC and will install the following files"
|
|
echo " on the partitions of the eMMC."
|
|
echo ""
|
|
echo " PARTITION FILENAME"
|
|
echo " --------- --------"
|
|
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
|
if test "${dualboot}" = "yes"; then
|
|
echo " linux_a ${INSTALL_LINUX_FILENAME}"
|
|
if test "${install_dualboot}" = "yes"; then
|
|
echo " linux_b ${INSTALL_LINUX_FILENAME}"
|
|
fi
|
|
echo " rootfs_a ${INSTALL_ROOTFS_FILENAME}"
|
|
if test "${install_dualboot}" = "yes"; then
|
|
echo " rootfs_b ${INSTALL_ROOTFS_FILENAME}"
|
|
fi
|
|
else
|
|
echo " linux ${INSTALL_LINUX_FILENAME}"
|
|
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
|
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
|
fi
|
|
echo ""
|
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
|
echo " to continue."
|
|
|
|
sleep 10
|
|
if test $? -eq 1; then
|
|
echo "Aborted by user.";
|
|
exit;
|
|
fi
|
|
|
|
# Skip user confirmation for U-Boot update
|
|
setenv forced_update 1
|
|
|
|
# Set bootdelay to zero so that firmware update is run immediately after
|
|
# the first reset.
|
|
setenv bootdelay 0
|
|
|
|
# Set target MMC device index to eMMC
|
|
setenv mmcdev 0
|
|
|
|
# Update U-Boot
|
|
echo ""
|
|
echo ""
|
|
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
|
echo ""
|
|
echo ""
|
|
update uboot mmc ${INSTALL_MMCDEV} fat ${INSTALL_UBOOT_FILENAME}
|
|
if test $? -eq 1; then
|
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
|
echo "";
|
|
echo "Aborted.";
|
|
exit;
|
|
fi
|
|
|
|
# Set 'bootcmd' to the second part of the script that will
|
|
# - Reset environment to defaults
|
|
# - Restore 'dualboot' if previously set
|
|
# - Save the environment
|
|
# - Partition the eMMC user data area for Linux
|
|
# - If Dual Boot
|
|
# - Update the system partitions: linux_a, linux_b, rootfs_a, rootfs_b
|
|
# - If Normal Boot:
|
|
# - Update the system partitions: linux, recovery, rootfs
|
|
# - Erase the 'update' partition
|
|
# - Configure recovery to wipe 'update' partition
|
|
# - Run 'recovery' and let the system boot after
|
|
setenv bootcmd "
|
|
env default -a;
|
|
setenv dualboot ${dualboot};
|
|
setenv install_dualboot ${install_dualboot};
|
|
saveenv;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Creating Linux partition table on the eMMC\";
|
|
echo \"\";
|
|
echo \"\";
|
|
run partition_mmc_linux;
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to create Linux partition table!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
if test \"\$\{dualboot\}\" = yes; then
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_a\";
|
|
echo \"\";
|
|
echo \"\";
|
|
update linux_a mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update linux_a!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
if test \"\$\{install_dualboot\}\" = yes; then
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_b\";
|
|
echo \"\";
|
|
echo \"\";
|
|
update linux_b mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update linux_b!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
fi;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_a\";
|
|
echo \"\";
|
|
echo \"\";
|
|
update rootfs_a mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update rootfs_a partition!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
if test \"\$\{install_dualboot\}\" = yes; then
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_b\";
|
|
echo \"\";
|
|
echo \"\";
|
|
update rootfs_b mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update rootfs_b partition!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
fi;
|
|
else
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux\";
|
|
echo \"\";
|
|
echo \"\";
|
|
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update linux!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing file ${INSTALL_RECOVERY_FILENAME} on recovery\";
|
|
echo \"\";
|
|
echo \"\";
|
|
update recovery mmc ${INSTALL_MMCDEV} ${INSTALL_RECOVERY_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update recovery partition!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs\";
|
|
echo \"\";
|
|
echo \"\";
|
|
update rootfs mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
|
if test \$? -eq 1; then
|
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
|
echo \"\";
|
|
echo \"Aborted.\";
|
|
exit;
|
|
fi;
|
|
echo \"\";
|
|
setenv boot_recovery yes;
|
|
setenv recovery_command wipe_update;
|
|
fi;
|
|
saveenv;
|
|
echo \"\";
|
|
echo \"\";
|
|
echo \">> Firmware installation complete.\";
|
|
if test \"\$\{dualboot\}\" != yes; then
|
|
echo \"Rebooting into recovery mode for final deployment.\";
|
|
fi;
|
|
echo \"\";
|
|
echo \"\";
|
|
sleep 1;
|
|
reset;
|
|
"
|
|
|
|
saveenv
|
|
reset
|