uboot: add support to ConnectCore MP25 DVK platform
Add initial support cloned from ccmp15, based on v2022.10 from STM release openstlinux-6.1-yocto-mickledore-mp2-v23.12.06. https://onedigi.atlassian.net/browse/DEL-8995 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit is contained in:
Arturo Buzarra
parent
9d5ce6c707
commit
28bcfecfaf
|
|
@ -220,6 +220,7 @@ do_compile:append:ccmp1() {
|
|||
|
||||
BOOT_TOOLS = "imx-boot-tools"
|
||||
BOOT_TOOLS:ccmp1 = "u-boot"
|
||||
BOOT_TOOLS:ccmp2 = "u-boot"
|
||||
|
||||
do_deploy:append:ccimx8m() {
|
||||
# Deploy u-boot-nodtb.bin and ccimx8m[m|n]-dvk.dtb, to be packaged in boot binary by imx-boot
|
||||
|
|
@ -269,4 +270,16 @@ do_deploy:append:ccmp1() {
|
|||
fi
|
||||
}
|
||||
|
||||
do_deploy:append:ccmp2() {
|
||||
# Deploy u-boot-nodtb.bin and ccmp2x-dvk-xxxx.dtb, to be packaged in fip binary by tf-a
|
||||
install -d ${DEPLOYDIR}/${BOOT_TOOLS}
|
||||
if [ -n "${UBOOT_DEVICETREE}" ]; then
|
||||
for devicetree in ${UBOOT_DEVICETREE}; do
|
||||
# Install u-boot dtb
|
||||
install -m 644 ${B}/${config}/arch/arm/dts/${devicetree}.dtb ${DEPLOYDIR}/${BOOT_TOOLS}/${FIP_UBOOT_DTB}-${devicetree}.dtb
|
||||
done
|
||||
fi
|
||||
install -m 0777 ${B}/${config}/u-boot-nodtb.bin ${DEPLOYDIR}/${BOOT_TOOLS}/u-boot-nodtb.bin
|
||||
}
|
||||
|
||||
SYSROOT_DIRS += "/boot"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,281 @@
|
|||
#
|
||||
# U-Boot script for installing Linux images created by Yocto from the micro SD
|
||||
# card into the eMMC
|
||||
#
|
||||
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
setenv INSTALL_ATF_FILENAME tf-a-##MACHINE##-${module_ram}-emmc.stm32
|
||||
setenv INSTALL_FIP_FILENAME fip-##MACHINE##-${module_ram}-optee.bin
|
||||
setenv INSTALL_MMCDEV 1
|
||||
|
||||
if test -z "${image-name}"; then
|
||||
setenv image-name ##DEFAULT_IMAGE_NAME##
|
||||
fi
|
||||
GRAPHICAL_IMAGES="##GRAPHICAL_IMAGES##"
|
||||
for g in ${GRAPHICAL_IMAGES}; do
|
||||
if test "${image-name}" = "${g}"; then
|
||||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.ubifs
|
||||
setenv INSTALL_RECOVERY_FILENAME ${BASEFILENAME}-##MACHINE##.recovery.ubifs
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.ubifs
|
||||
|
||||
# Check for presence of firmware files on the SD card
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
if test "${dualboot}" != "yes"; then
|
||||
FILES="${FILES} ${INSTALL_RECOVERY_FILENAME}"
|
||||
fi
|
||||
for install_f in ${FILES}; do
|
||||
if test ! -e mmc ${INSTALL_MMCDEV} ${install_f}; then
|
||||
echo "ERROR: Could not find file ${install_f}";
|
||||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
# Verify what kind of rootfs is going to be programmed
|
||||
if test ! -e mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
||||
echo "ERROR: Could not find file ${INSTALL_ROOTFS_FILENAME}";
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.squashfs
|
||||
echo "INFO: Trying with file ${INSTALL_ROOTFS_FILENAME}";
|
||||
if test ! -e mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
||||
echo "ERROR: Could not find file ${INSTALL_ROOTFS_FILENAME}";
|
||||
install_abort=1;
|
||||
else
|
||||
setenv rootfstype squashfs
|
||||
fi
|
||||
fi
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "To install a different image, set variable 'image-name', e.g.:"
|
||||
echo " => setenv image-name core-image-base"
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " fsbl1 ${INSTALL_ATF_FILENAME}"
|
||||
echo " fsbl2 ${INSTALL_ATF_FILENAME}"
|
||||
echo " fip-a ${INSTALL_FIP_FILENAME}"
|
||||
echo " fip-b ${INSTALL_FIP_FILENAME}"
|
||||
if test "${dualboot}" = "yes"; then
|
||||
echo " linux_a ${INSTALL_LINUX_FILENAME}"
|
||||
if test "${install_dualboot}" = "yes"; then
|
||||
echo " linux_b ${INSTALL_LINUX_FILENAME}"
|
||||
fi
|
||||
echo " rootfs_a ${INSTALL_ROOTFS_FILENAME}"
|
||||
if test "${install_dualboot}" = "yes"; then
|
||||
echo " rootfs_b ${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
else
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
# Set bootdelay to zero so that firmware update is run immediately after
|
||||
# the first reset.
|
||||
setenv bootdelay 0
|
||||
|
||||
# Update ATF and FIP images
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing ATF boot loader image ${INSTALL_ATF_FILENAME}"
|
||||
echo ""
|
||||
echo ""
|
||||
update fsbl1 mmc ${INSTALL_MMCDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl1!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update fsbl2 mmc ${INSTALL_MMCDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl2!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing FIP boot loader image ${INSTALL_FIP_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update fip-a mmc ${INSTALL_MMCDEV} ${INSTALL_FIP_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fip-a!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update fip-b mmc ${INSTALL_MMCDEV} ${INSTALL_FIP_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fip-b!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Check if uboot_config volume exists (U-Boot env)
|
||||
ubi part UBI
|
||||
ubi check uboot_config
|
||||
if test $? -eq 1; then
|
||||
# Create volumes layout (including U-Boot env)
|
||||
run ubivolscript;
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' to the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Restore 'dualboot' if previously set
|
||||
# - Run 'ubivolscript' script to re-partition the UBI partition and save the
|
||||
# environment
|
||||
# - If Dual Boot
|
||||
# - Update the system partitions: linux_a, linux_b, rootfs_a, rootfs_b
|
||||
# - Set bootlimit to 3
|
||||
# - If Normal Boot:
|
||||
# - Update the system partitions: linux, recovery, rootfs
|
||||
# - Configure recovery to wipe 'update' partition
|
||||
# - Run 'recovery' and let the system boot after
|
||||
setenv bootcmd "
|
||||
env default -a;
|
||||
setenv dualboot ${dualboot};
|
||||
setenv rootfstype ${rootfstype};
|
||||
setenv install_dualboot ${install_dualboot};
|
||||
run ubivolscript;
|
||||
if test \"\$\{dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_a mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_a!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
if test \"\$\{install_dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_b mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_b!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_a mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_a partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
if test \"\$\{install_dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_b mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_b partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
fi;
|
||||
setenv bootlimit 3;
|
||||
else
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_RECOVERY_FILENAME} on recovery\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} ${INSTALL_RECOVERY_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update recovery partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
setenv boot_recovery yes;
|
||||
setenv recovery_command wipe_update;
|
||||
fi;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Firmware installation complete.\";
|
||||
if test \"\$\{dualboot\}\" != yes; then
|
||||
echo \"Rebooting into recovery mode for final deployment.\";
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
sleep 1;
|
||||
bootcount reset;
|
||||
reset;
|
||||
"
|
||||
|
||||
bootcount reset
|
||||
saveenv
|
||||
reset
|
||||
|
|
@ -0,0 +1,284 @@
|
|||
#
|
||||
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||
# into the NAND
|
||||
#
|
||||
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
setenv INSTALL_ATF_FILENAME tf-a-##MACHINE##-${module_ram}-nand.stm32
|
||||
setenv INSTALL_FIP_FILENAME fip-##MACHINE##-${module_ram}-optee.bin
|
||||
setenv INSTALL_USBDEV 0
|
||||
|
||||
if test -z "${image-name}"; then
|
||||
setenv image-name ##DEFAULT_IMAGE_NAME##
|
||||
fi
|
||||
GRAPHICAL_IMAGES="##GRAPHICAL_IMAGES##"
|
||||
for g in ${GRAPHICAL_IMAGES}; do
|
||||
if test "${image-name}" = "${g}"; then
|
||||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.ubifs
|
||||
setenv INSTALL_RECOVERY_FILENAME ${BASEFILENAME}-##MACHINE##.recovery.ubifs
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.ubifs
|
||||
|
||||
# Check for presence of firmware files on the USB
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
if test "${dualboot}" != "yes"; then
|
||||
FILES="${FILES} ${INSTALL_RECOVERY_FILENAME}"
|
||||
fi
|
||||
for install_f in ${FILES}; do
|
||||
if test ! -e usb ${INSTALL_USBDEV} ${install_f}; then
|
||||
echo "ERROR: Could not find file ${install_f}";
|
||||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
# Verify what kind of rootfs is going to be programmed
|
||||
if test ! -e usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
||||
echo "ERROR: Could not find file ${INSTALL_ROOTFS_FILENAME}";
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.squashfs
|
||||
echo "INFO: Trying with file ${INSTALL_ROOTFS_FILENAME}";
|
||||
if test ! -e usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
||||
echo "ERROR: Could not find file ${INSTALL_ROOTFS_FILENAME}";
|
||||
install_abort=1;
|
||||
else
|
||||
setenv rootfstype squashfs
|
||||
fi
|
||||
else
|
||||
setenv rootfstype
|
||||
fi
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "To install a different image, set variable 'image-name', e.g.:"
|
||||
echo " => setenv image-name core-image-base"
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " fsbl1 ${INSTALL_ATF_FILENAME}"
|
||||
echo " fsbl2 ${INSTALL_ATF_FILENAME}"
|
||||
echo " fip-a ${INSTALL_FIP_FILENAME}"
|
||||
echo " fip-b ${INSTALL_FIP_FILENAME}"
|
||||
if test "${dualboot}" = "yes"; then
|
||||
echo " linux_a ${INSTALL_LINUX_FILENAME}"
|
||||
if test "${install_dualboot}" = "yes"; then
|
||||
echo " linux_b ${INSTALL_LINUX_FILENAME}"
|
||||
fi
|
||||
echo " rootfs_a ${INSTALL_ROOTFS_FILENAME}"
|
||||
if test "${install_dualboot}" = "yes"; then
|
||||
echo " rootfs_b ${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
else
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
# Set bootdelay to zero so that firmware update is run immediately after
|
||||
# the first reset.
|
||||
setenv bootdelay 0
|
||||
|
||||
# Update ATF and FIP images
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing ATF boot loader image ${INSTALL_ATF_FILENAME}"
|
||||
echo ""
|
||||
echo ""
|
||||
update fsbl1 usb ${INSTALL_USBDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl1!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update fsbl2 usb ${INSTALL_USBDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl2!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing FIP boot loader image ${INSTALL_FIP_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update fip-a usb ${INSTALL_USBDEV} ${INSTALL_FIP_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fip-a!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update fip-b usb ${INSTALL_USBDEV} ${INSTALL_FIP_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fip-b!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Check if uboot_config volume exists (U-Boot env)
|
||||
ubi part UBI
|
||||
ubi check uboot_config
|
||||
if test $? -eq 1; then
|
||||
# Create volumes layout (including U-Boot env)
|
||||
run ubivolscript;
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' to the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Restore 'dualboot' if previously set
|
||||
# - Run 'ubivolscript' script to re-partition the UBI partition and save the
|
||||
# environment
|
||||
# - If Dual Boot
|
||||
# - Update the system partitions: linux_a, linux_b, rootfs_a, rootfs_b
|
||||
# - Set bootlimit to 3
|
||||
# - If Normal Boot:
|
||||
# - Update the system partitions: linux, recovery, rootfs
|
||||
# - Configure recovery to wipe 'update' partition
|
||||
# - Run 'recovery' and let the system boot after
|
||||
setenv bootcmd "
|
||||
env default -a;
|
||||
setenv dualboot ${dualboot};
|
||||
setenv rootfstype ${rootfstype};
|
||||
setenv install_dualboot ${install_dualboot};
|
||||
run ubivolscript;
|
||||
usb start;
|
||||
if test \"\$\{dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_a usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_a!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
if test \"\$\{install_dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_b usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_b!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_a usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_a partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
if test \"\$\{install_dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_b usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_b partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
fi;
|
||||
setenv bootlimit 3;
|
||||
else
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_RECOVERY_FILENAME} on recovery\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery usb ${INSTALL_USBDEV} ${INSTALL_RECOVERY_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update recovery partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
setenv boot_recovery yes;
|
||||
setenv recovery_command wipe_update;
|
||||
fi;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Firmware installation complete.\";
|
||||
if test \"\$\{dualboot\}\" != yes; then
|
||||
echo \"Rebooting into recovery mode for final deployment.\";
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
sleep 1;
|
||||
bootcount reset;
|
||||
reset;
|
||||
"
|
||||
|
||||
bootcount reset
|
||||
saveenv
|
||||
reset
|
||||
|
|
@ -0,0 +1,339 @@
|
|||
#!/bin/sh
|
||||
#===============================================================================
|
||||
#
|
||||
# Copyright (C) 2022-2024 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
# under the terms of the GNU General Public License version 2 as published by
|
||||
# the Free Software Foundation.
|
||||
#
|
||||
#
|
||||
# Description:
|
||||
# Script to flash Yocto build artifacts over USB to the target.
|
||||
#===============================================================================
|
||||
# set -x
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto
|
||||
#
|
||||
|
||||
# Exit on any error
|
||||
set -e
|
||||
|
||||
# Parse uuu cmd output
|
||||
getenv()
|
||||
{
|
||||
uuu -v fb: ucmd printenv "${1}" | sed -ne "s,^${1}=,,g;T;p"
|
||||
}
|
||||
|
||||
check_cmd()
|
||||
{
|
||||
uuu -v fb: acmd ${1} > /dev/null 2> /dev/null
|
||||
uuu -v fb: ucmd echo retval=\$? | sed -ne "s,^retval=,,g;T;p"
|
||||
}
|
||||
|
||||
show_usage()
|
||||
{
|
||||
echo "Usage: $0 [options]"
|
||||
echo ""
|
||||
echo " Options:"
|
||||
echo " -a <atf-filename> Arm-trusted-firmware filename."
|
||||
echo " Auto-determined by variant if not provided."
|
||||
echo " -b Activate bootcount mechanism (3 boot attempts)."
|
||||
echo " -d Install firmware on dualboot partitions (system A and system B)."
|
||||
echo " (Implies -b)."
|
||||
echo " -f <fip-filename> FIP filename."
|
||||
echo " Auto-determined by variant if not provided."
|
||||
echo " -h Show this help."
|
||||
echo " -i <dey-image-name> Image name that prefixes the image filenames, such as 'dey-image-qt', "
|
||||
echo " 'dey-image-webkit', 'core-image-base'..."
|
||||
echo " Defaults to '##DEFAULT_IMAGE_NAME##' if not provided."
|
||||
echo " -n No wait. Skips 10 seconds delay to stop script."
|
||||
echo " -t Install TrustFence artifacts."
|
||||
exit 2
|
||||
}
|
||||
|
||||
# Update a partition
|
||||
# Params:
|
||||
# 1. partition
|
||||
# 2. file
|
||||
# 3. timeout (in ms)
|
||||
# Description:
|
||||
# - downloads image to RAM
|
||||
# - runs 'update' command from RAM
|
||||
part_update()
|
||||
{
|
||||
echo "\033[36m"
|
||||
echo "====================================================================================="
|
||||
echo "Updating '${1}' partition with file: ${2}"
|
||||
echo "====================================================================================="
|
||||
echo "\033[0m"
|
||||
|
||||
uuu fb: download -f "${2}"
|
||||
uuu "fb[-t ${3}]:" ucmd update "${1}" ram \${fastboot_buffer} \${filesize} ${ERASE}
|
||||
}
|
||||
|
||||
clear
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
|
||||
# Command line admits the following parameters:
|
||||
# -a <atf-filename>
|
||||
# -b, -d, -n (booleans)
|
||||
# -f <fip-filename>
|
||||
# -i <image-name>
|
||||
while getopts 'a:bdf:hi:n' c
|
||||
do
|
||||
case $c in
|
||||
a) INSTALL_ATF_FILENAME=${OPTARG} ;;
|
||||
b) BOOTCOUNT=true ;;
|
||||
d) INSTALL_DUALBOOT=true && BOOTCOUNT=true ;;
|
||||
f) INSTALL_FIP_FILENAME=${OPTARG} ;;
|
||||
h) show_usage ;;
|
||||
i) IMAGE_NAME=${OPTARG} ;;
|
||||
n) NOWAIT=true ;;
|
||||
t) TRUSTFENCE=true ;;
|
||||
esac
|
||||
done
|
||||
|
||||
# Enable the redirect support to get u-boot variables values
|
||||
uuu fb: ucmd setenv stdout serial,fastboot
|
||||
|
||||
# Check if dualboot variable is active
|
||||
dualboot=$(getenv "dualboot")
|
||||
if [ "${dualboot}" = "yes" ]; then
|
||||
DUALBOOT=true;
|
||||
fi
|
||||
|
||||
# Check if uboot_config volume exists (U-Boot env)
|
||||
uuu "fb[-t 15000]:" ucmd ubi part UBI
|
||||
check=$(check_cmd "ubi check uboot_config")
|
||||
if [ "${check}" = "1" ]; then
|
||||
RUNVOLS=true
|
||||
fi
|
||||
|
||||
# Check module_ram variable exists
|
||||
module_ram=$(getenv "module_ram")
|
||||
if [ -z "${module_ram}" ]; then
|
||||
module_ram="512MB" # Default variant
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
echo ""
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Determine ATF file to program
|
||||
if [ -z "${INSTALL_ATF_FILENAME}" ]; then
|
||||
INSTALL_ATF_FILENAME="tf-a-##MACHINE##-${module_ram}-nand.stm32##SIGNED_TFA##"
|
||||
fi
|
||||
|
||||
# Determine FIP file to program
|
||||
if [ -z "${INSTALL_FIP_FILENAME}" ]; then
|
||||
INSTALL_FIP_FILENAME="fip-##MACHINE##-${module_ram}-optee##SIGNED##.bin"
|
||||
fi
|
||||
|
||||
# Determine linux, recovery, and rootfs image filenames to update
|
||||
if [ -z "${IMAGE_NAME}" ]; then
|
||||
IMAGE_NAME="##DEFAULT_IMAGE_NAME##"
|
||||
fi
|
||||
GRAPHICAL_IMAGES="##GRAPHICAL_IMAGES##"
|
||||
for g in ${GRAPHICAL_IMAGES}; do
|
||||
if [ "${IMAGE_NAME}" = "${g}" ]; then
|
||||
BASEFILENAME="${IMAGE_NAME}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if [ -z "${BASEFILENAME}" ]; then
|
||||
BASEFILENAME="${IMAGE_NAME}"
|
||||
fi
|
||||
INSTALL_LINUX_FILENAME="${BASEFILENAME}-##MACHINE##.boot.ubifs"
|
||||
INSTALL_RECOVERY_FILENAME="${BASEFILENAME}-##MACHINE##.recovery.ubifs"
|
||||
INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-##MACHINE##.ubifs"
|
||||
|
||||
# Verify existence of files before starting the update
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
if [ "${DUALBOOT}" != true ]; then
|
||||
FILES="${FILES} ${INSTALL_RECOVERY_FILENAME}"
|
||||
fi
|
||||
|
||||
for f in ${FILES}; do
|
||||
if [ ! -f ${f} ]; then
|
||||
echo "\033[31m[ERROR] Could not find file '${f}'\033[0m"
|
||||
ABORT=true
|
||||
fi
|
||||
done;
|
||||
|
||||
# Verify what kind of rootfs is going to be programmed
|
||||
if [ ! -f ${INSTALL_ROOTFS_FILENAME} ]; then
|
||||
echo "\033[31m[ERROR] Could not find file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
|
||||
INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-##MACHINE##.squashfs"
|
||||
echo "\033[32m[INFO] Trying with file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
|
||||
if [ -f "${INSTALL_ROOTFS_FILENAME}" ]; then
|
||||
SQUASHFS=true
|
||||
else
|
||||
echo "\033[31m[ERROR] Could not find file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
|
||||
ABORT=true
|
||||
fi
|
||||
fi
|
||||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
||||
# Enable bootcount mechanism by setting a bootlimit
|
||||
if [ "${BOOTCOUNT}" = true ]; then
|
||||
bootlimit_cmd="setenv bootlimit 3"
|
||||
fi
|
||||
|
||||
# parts names
|
||||
LINUX_NAME="linux"
|
||||
RECOVERY_NAME="recovery"
|
||||
ROOTFS_NAME="rootfs"
|
||||
# Print warning about storage media being deleted
|
||||
if [ "${NOWAIT}" != true ]; then
|
||||
WAIT=10
|
||||
printf "\n"
|
||||
printf " ====================\n"
|
||||
printf " = IMPORTANT! =\n"
|
||||
printf " ====================\n"
|
||||
printf " This process will erase your NAND and will install the following files\n"
|
||||
printf " on the partitions of the NAND.\n"
|
||||
printf "\n"
|
||||
printf " PARTITION\tFILENAME\n"
|
||||
printf " ---------\t--------\n"
|
||||
printf " fsbl1\t${INSTALL_ATF_FILENAME}\n"
|
||||
printf " fsbl2\t${INSTALL_ATF_FILENAME}\n"
|
||||
printf " fip-a\t${INSTALL_FIP_FILENAME}\n"
|
||||
printf " fip-b\t${INSTALL_FIP_FILENAME}\n"
|
||||
if [ "${DUALBOOT}" = true ]; then
|
||||
printf " ${LINUX_NAME}_a\t${INSTALL_LINUX_FILENAME}\n"
|
||||
if [ "${INSTALL_DUALBOOT}" = true ]; then
|
||||
printf " ${LINUX_NAME}_b\t${INSTALL_LINUX_FILENAME}\n"
|
||||
fi
|
||||
printf " ${ROOTFS_NAME}_a\t${INSTALL_ROOTFS_FILENAME}\n"
|
||||
if [ "${INSTALL_DUALBOOT}" = true ]; then
|
||||
printf " ${ROOTFS_NAME}_b\t${INSTALL_ROOTFS_FILENAME}\n"
|
||||
fi
|
||||
else
|
||||
printf " ${LINUX_NAME}\t${INSTALL_LINUX_FILENAME}\n"
|
||||
printf " ${RECOVERY_NAME}\t${INSTALL_RECOVERY_FILENAME}\n"
|
||||
printf " ${ROOTFS_NAME}\t${INSTALL_ROOTFS_FILENAME}\n"
|
||||
fi
|
||||
printf "\n"
|
||||
printf " Press CTRL+C now if you wish to abort.\n"
|
||||
printf "\n"
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
printf " Starting update process\n"
|
||||
fi
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
uuu fb: ucmd setenv forced_update 1
|
||||
|
||||
# Update ATF
|
||||
part_update "fsbl1" "${INSTALL_ATF_FILENAME}" 5000
|
||||
part_update "fsbl2" "${INSTALL_ATF_FILENAME}" 5000
|
||||
|
||||
# Update FIP
|
||||
part_update "fip-a" "${INSTALL_FIP_FILENAME}" 5000
|
||||
part_update "fip-b" "${INSTALL_FIP_FILENAME}" 5000
|
||||
|
||||
# Environment volume does not exist and needs to be created
|
||||
if [ "${RUNVOLS}" = true ]; then
|
||||
# Create UBI volumes
|
||||
uuu "fb[-t 45000]:" ucmd run ubivolscript
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' for the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Keep the 'dualboot' status
|
||||
# - Reset the bootcount
|
||||
# - Set bootlimit (if required)
|
||||
# - Save the environment
|
||||
# - Update the 'linux' partition(s)
|
||||
# - Update the 'rootfs' partition(s)
|
||||
uuu fb: ucmd setenv bootcmd "
|
||||
env default -a;
|
||||
setenv dualboot \${dualboot};
|
||||
bootcount reset;
|
||||
${bootlimit_cmd};
|
||||
saveenv;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux firmware\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
fastboot 0;
|
||||
"
|
||||
|
||||
uuu fb: ucmd saveenv
|
||||
uuu fb: acmd reset
|
||||
|
||||
# Wait for the target to reset
|
||||
sleep 8
|
||||
|
||||
# Set fastboot buffer address to $loadaddr
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Create UBI volumes
|
||||
uuu "fb[-t 45000]:" ucmd run ubivolscript
|
||||
|
||||
if [ "${DUALBOOT}" = true ]; then
|
||||
# Update Linux A
|
||||
part_update "${LINUX_NAME}_a" "${INSTALL_LINUX_FILENAME}" 15000
|
||||
# Update Linux B
|
||||
if [ "${INSTALL_DUALBOOT}" = true ]; then
|
||||
part_update "${LINUX_NAME}_b" "${INSTALL_LINUX_FILENAME}" 15000
|
||||
fi
|
||||
# Update Rootfs A
|
||||
part_update "${ROOTFS_NAME}_a" "${INSTALL_ROOTFS_FILENAME}" 120000
|
||||
# Update Rootfs B
|
||||
if [ "${INSTALL_DUALBOOT}" = true ]; then
|
||||
part_update "${ROOTFS_NAME}_b" "${INSTALL_ROOTFS_FILENAME}" 120000
|
||||
fi
|
||||
else
|
||||
# Update Linux
|
||||
part_update "${LINUX_NAME}" "${INSTALL_LINUX_FILENAME}" 15000
|
||||
# Update Recovery
|
||||
part_update "${RECOVERY_NAME}" "${INSTALL_RECOVERY_FILENAME}" 15000
|
||||
# Update Rootfs
|
||||
part_update "${ROOTFS_NAME}" "${INSTALL_ROOTFS_FILENAME}" 120000
|
||||
# Configure u-boot to boot into recovery mode and format the
|
||||
# 'update' partition
|
||||
uuu fb: ucmd setenv boot_recovery yes
|
||||
uuu fb: ucmd setenv recovery_command wipe_update
|
||||
uuu fb: ucmd saveenv
|
||||
fi
|
||||
|
||||
# Set the dboot_kernel_var to fitimage if Trustfence is enabled
|
||||
if [ "${TRUSTFENCE}" = "true" ] || echo "$INSTALL_UBOOT_FILENAME" | grep -q -e "signed"; then
|
||||
uuu fb: ucmd setenv dboot_kernel_var fitimage
|
||||
uuu fb: ucmd saveenv
|
||||
fi
|
||||
# Set the rootfstype if squashfs
|
||||
if [ "${SQUASHFS}" = true ]; then
|
||||
uuu fb: ucmd setenv rootfstype squashfs
|
||||
uuu fb: ucmd saveenv
|
||||
fi
|
||||
|
||||
# Reset the bootcount
|
||||
uuu fb: ucmd bootcount reset
|
||||
# Reset the target
|
||||
uuu fb: acmd reset
|
||||
|
||||
echo "\033[32m"
|
||||
echo "============================================================="
|
||||
echo "Done! Wait for the target to complete first boot process."
|
||||
echo "============================================================="
|
||||
echo "\033[0m"
|
||||
|
||||
exit
|
||||
|
|
@ -0,0 +1,82 @@
|
|||
#
|
||||
# U-Boot bootscript for EMMC/SD images created by Yocto.
|
||||
#
|
||||
|
||||
# As the first step in the boot script, check if we are using DualBoot. This
|
||||
# requires the script to change some variables and save them, while the rest
|
||||
# of the script changes variables only temporarily without saving them.
|
||||
|
||||
# Build boot attempt message string
|
||||
if test "${bootlimit}" -gt 0 && test "${bootcount}" -gt 0; then
|
||||
bootattempt="(boot attempt ${bootcount}/${bootlimit})"
|
||||
fi
|
||||
|
||||
# Pre step: check if we boot from uSD.
|
||||
if test "${mmcbootdev}" = "1"; then
|
||||
# We are booting from the SD card.
|
||||
setenv mmcroot /dev/mmcblk${mmcbootdev}p2
|
||||
elif test "${dualboot}" = "yes"; then
|
||||
if test "${active_system}" = "linux_a"; then
|
||||
echo "Booting from system A ${bootattempt}"
|
||||
part number mmc ${mmcbootdev} linux_a tmp_mmcpart
|
||||
part number mmc ${mmcbootdev} rootfs_a tmp_rootfs_index
|
||||
else
|
||||
echo "Booting from system B ${bootattempt}"
|
||||
part number mmc ${mmcbootdev} linux_b tmp_mmcpart
|
||||
part number mmc ${mmcbootdev} rootfs_b tmp_rootfs_index
|
||||
fi
|
||||
part uuid mmc ${mmcbootdev}:${tmp_rootfs_index} tmp_mmcroot
|
||||
if test "${mmcpart}" -ne "${tmp_mmcpart}"; then
|
||||
setexpr mmcpart ${tmp_mmcpart}
|
||||
env_save_needed="1"
|
||||
fi
|
||||
if test "${mmcroot}" != "PARTUUID=${tmp_mmcroot}"; then
|
||||
setenv mmcroot PARTUUID=${tmp_mmcroot}
|
||||
env_save_needed="1"
|
||||
fi
|
||||
if test "${env_save_needed}" = "1"; then
|
||||
env delete tmp_mmcpart tmp_rootfs_index tmp_mmcroot
|
||||
env save
|
||||
fi
|
||||
else
|
||||
echo "Booting system ${bootattempt}"
|
||||
# Get the UUID of the configured boot partition.
|
||||
part uuid mmc ${mmcbootdev}:${mmcpart} bootpart
|
||||
# Check the boot source.
|
||||
if test "${bootpart}" = "${part1_uuid}"; then
|
||||
# We are booting from the eMMC using 'linux'.
|
||||
true
|
||||
elif test "${bootpart}" = "${part2_uuid}"; then
|
||||
# We are booting from the eMMC using 'recovery'.
|
||||
setenv boot_initrd true
|
||||
setenv initrd_file uramdisk-recovery.img
|
||||
fi
|
||||
fi
|
||||
|
||||
# Back up environment variables
|
||||
setenv ORIG_overlays ${overlays}
|
||||
|
||||
#
|
||||
# Determine overlays to apply depending on the hardware capabilities
|
||||
# described by the HWID, SOM version, and carrier board version.
|
||||
#
|
||||
setexpr module_has_wifi ${hwid_2} \& 20000
|
||||
setexpr module_has_wifi ${module_has_wifi} / 20000
|
||||
setexpr module_has_bt ${hwid_2} \& 40000
|
||||
setexpr module_has_bt ${module_has_bt} / 40000
|
||||
|
||||
if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
|
||||
setenv overlays _ov_som_bt_ccmp25.dtbo,${overlays}
|
||||
fi
|
||||
|
||||
if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
|
||||
setenv overlays _ov_som_wifi_ccmp25.dtbo,${overlays}
|
||||
fi
|
||||
|
||||
dboot linux mmc ${mmcbootdev}:${mmcpart}
|
||||
|
||||
# We only get here in case of an error on the dboot command.
|
||||
|
||||
# Undo changes to environment variables
|
||||
setenv overlays ${ORIG_overlays}
|
||||
setenv ORIG_overlays
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
# Copyright (C) 2024 Digi International Inc.
|
||||
|
||||
require u-boot-dey.inc
|
||||
LIC_FILES_CHKSUM = "file://Licenses/README;md5=2ca5f2c35c8cc335f0a19756634782f1"
|
||||
|
||||
DEPENDS += "flex-native bison-native"
|
||||
DEPENDS += "python3-setuptools-native"
|
||||
|
||||
SRCBRANCH = "v2022.10/master"
|
||||
SRCREV = "${AUTOREV}"
|
||||
|
||||
SRC_URI += " \
|
||||
${@oe.utils.conditional('TRUSTFENCE_SIGN_FIT_STM', '1', 'file://fit_signature.cfg', '', d)} \
|
||||
"
|
||||
|
||||
install_helper_files() {
|
||||
# Install dtbs from UBOOT_DEVICETREE to datadir, so that kernel
|
||||
# can use it for signing, and kernel will deploy after signs it.
|
||||
if [ -n "${UBOOT_DEVICETREE}" ]; then
|
||||
for devicetree in ${UBOOT_DEVICETREE}; do
|
||||
install -Dm 0644 ${B}/${config}/arch/arm/dts/${devicetree}.dtb ${D}${datadir}/${devicetree}.dtb
|
||||
done
|
||||
else
|
||||
bbwarn "${UBOOT_DEVICETREE} not found"
|
||||
fi
|
||||
}
|
||||
|
||||
do_install:append() {
|
||||
# Copy additional files, so kernel can use it when creating the FIT image
|
||||
if [ "${KERNEL_IMAGETYPE}" = "fitImage" ]; then
|
||||
install_helper_files
|
||||
fi
|
||||
}
|
||||
|
||||
COMPATIBLE_MACHINE = "(ccmp2)"
|
||||
Loading…
Reference in New Issue