On the multi-MTD layout (default) the 'data' UBI volume is never created
and thus not mounted by the system. This is because with this layout, the
creation of the UBI volume is done by the 'update' command, but nobody
updates this partition cause DEY doesn't generate an image for it.
We want the 'data' UBI volume to be created so that the CC6UL can connect
to the regular Remote Manager URI and store the certificate in it.
As long as a UBI volume is created, Linux will mount it, so this commit
erases the partition and creates the UBI volume.
The same goes for the 'update' partition. The installer was relying on the
recovery mechanism to wipe this partition, but this is not longer required
with UBI. As long as the installer erases the partition and creates the
volume, Linux will be able to mount it, so the boot in recovery mode has
been removed from the script.
Note: the formatting is only done for multi-MTD layout; the ubivolscript
creates all volumes for single-MTD layout.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Set V2 TX power method for regulatory management on the iw612 init
and remove the 'txpwrlimit_cfg' and 'init_hostcmd_cfg' driver
parameters which are only used for V1 TX power method.
This allows the driver to load a specific rgpower_XX.bin binary file
contained in the rootfs whenever command "iw reg set XX" is executed,
updating the TX power settings and allowed frequencies list to those
contained in the file. 'XX' stands for the 2-character ISO3166-1
alpha-2 country code.
If the selected rgpower_XX.bin file does not exist, or no country is
selected, the driver will load rgpower_WW.bin (Worldwide) by default.
https://onedigi.atlassian.net/browse/DEL-8974
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Do not install 'txpower' and 'rutxpower' files from the Murata repo,
which are used for the V1 TX power method, and replace them with custom
'rgpower' files, required for the V2 TX power method.
These files encode the TxPower limitations obtained during the
ConnectCore 93 Certification tests, and there is one file per supported
country. There is a common file for all the European countries, so
create links for each of them, based on the CEPT REC7003E recommendation.
New 'rgpower' files:
- rgpower_CA.bin (MD5SUM: 7c012351f0521a02e3d78615fed5eb54)
- rgpower_EU.bin (MD5SUM: 4d1a54b3c1f12a7d0bb44d0337786a0b)
- rgpower_JP.bin (MD5SUM: b7706bb2718997d933b2bdf1e53e64b4)
- rgpower_US.bin (MD5SUM: 16555f962b025e0426098decd0147f1f)
- rgpower_WW.bin (MD5SUM: 505223c56527e849d4b1e5800c8613b5)
Take the opportunity to just install bt_power_config scripts and prevent
the installation of other unused files (db.txt, ed_mac_ctrl_V2_nw61x.conf
and regulatory.db) from the Murata repository.
https://onedigi.atlassian.net/browse/DEL-8974
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Commit ac69566ecd mistakenly removed
the command of cc9, cc8x, and cc8m media installers that sets the
variable that contains the U-Boot file to install.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9720
At the point of saving the bootcmd for the second stage of the install
process we want to use the variable value, not the variable name
since this variable doesn't exist after the environment is reset.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9711
This commit enables building dey-image-flutter for the ConnectCore MP15
platform. It integrates the necessary configurations to support Flutter-based
graphical applications on this platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the existing uboot_deploy(_spl)_config function to clean up and rework
the symlinks created in the deploy directory.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
This gets substituted when TrustFence is enabled to "signed/encrypted"
or removed when TrustFence is disabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Programming an encrypted bootloader can only be done after the
secure keys have been programed on the OTP bits, and the device
has been closed. Programming on an open device would result in a
non-secure configuration or a non-bootable device after the
close operation.
Create functions to detect the current TrustFence status and exit
the install script if the device is open and the artifacts are
encrypted.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9699
The `-t` option to program images with TrustFence didn't make
much sense because the install script is dynamically generated
at build-time with the name of the boot artifacts containing
"signed/encrypted" on their filenames.
This commit:
- Removes `-t` option to simplify the script.
- Determines if programming a signed/encrypted bootloader by
looking at the bootloader filename.
- For NXP platforms, reworks the function that updates the
bootloader to properly program only-signed bootloaders (currently
wrongly using `trustfence update`)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
fix missing option to include the required kernel options for tsn support.
That support was added in commit 37f5db42ac for kernel 6.1, but it
was missed for kernel 6.6.
Add the support to include the required fragment, regardless the kernel
version.
While on it, update the tsn config to match kernel 6.6.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The default secure storage (/var/lib/tee) is a tmpfs and not persistent
across reboots. Change it to the data partition (/mnt/data/tee) when
TrustFence file system encryption enabled
For the log file, do use the /var/log/ directory instead of default
/data
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9683
As the OmniVision OV5640 camera is now deprecated and no longer supported by
most vendors, this commit moves its support to a separate Device Tree overlay,
allowing it to be used if needed.
Instead, the Sony IMX335 MIPI camera is integrated into the default device
tree as the default supported camera for the CCMP25-DVK platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Moved deploy_symlinks_atf from SYSROOT_PREPROCESS_FUNCS to do_deploy task
to ensure symlinks are created correctly even when rebuilding from the
shared state after a "bitbake -c clean tf-a-stm32mp".
Override do_deploy[sstate-outputdirs] from the original recipe to allow
installing both the deploy artifacts (binaries and symlinks) to the
package deploy directory.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the address where the fitImage is loaded after the addresses
where the binaries in it are decompressed. This way, the fitImage
can grow without size restrictions.
The memory map now looks like this:
0xC0000000 Start of memory
|
| (32 MiB)
v
0xC2000000 Kernel loadaddr ($loadaddr)
|
| (32 MiB)
v
0xC4000000 DTB/DTBO load address ($fdt_addr)
| (4 MiB)
v
0xC4400000 Init ram disk ($initrd_addr)
|
|
| (64 MiB)
|
v
0xC8400000 ZIP/fitImage address ($fit_addr_r)
|
~
|
v
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- The TF-A binaries now have ${BOOTSCHEME_DEFAULT} in them (optee or
opteemin)
- The FIP binaries now have ${BOOTSCHEME_DEFAULT}-sdcard in them
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9678
The login prompt appears before Wayland is fully initialized and
has created a wayland socket.
Logging in too early as root in this scenario caused the
WAYLAND_DISPLAY environment variable to be left empty. As a
consequence, gstreamer failed to use waylandsink to print contents
in the display.
Introduce a 10-seconds polling loop to wait for the wayland socket to
be available before proceeding with the login.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
* Delete custom wolfssl_5.4.0-fips.bb recipe and README.
* Removed WolfSSL dynamic layer registration.
FIPS support is now managed through the external meta-wolfssl layer,
making this implementation unnecessary in meta-digi.
https://onedigi.atlassian.net/browse/DEL-9631
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new version in meta-wolfssl does build properly, so this append is
no longer needed.
https://onedigi.atlassian.net/browse/DEL-9631
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto added kernel local version support by using the KERNEL_LOCALVERSION
variable. It conflicts with the "fsl-kernel-localversion" class from
the meta-freescale layer, resulting in a duplicated local version in the
kernel release label (uname -r). Use the current Yocto support to avoid
that duplication instead of meta-freescale's class.
This enables further simplification of the 'copy_defconfig' task for NXP
and STM platforms using common code.
https://onedigi.atlassian.net/browse/DEL-9669
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
IMAGE_FSTYPES was declared on each platform config file, but it has the
same values for all platforms depending on the storage media (mmc or mtd)
and whether read-only is enabled.
Move the conditional weak assignment to digi-default.inc and remove it from
each platform config.
In the case of STM platforms, since IMAGE_FSTYPES is weak-assigned by STM
layer, we still need to append/remove from it inside the platform config,
but move it to the family includes, rather than declaring it on each
specific platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The generation of the sdcard image takes time and resources, and
it's not involved in the Get Started.
This can be easily re-enabled by appending the variable in the
project local.conf.
Append the variable in the build scripts, to facilitate its usage
on release builds.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The HCI_UART Bluetooth driver does not support suspend-to-RAM operation, so the
driver must be loaded and unloaded manually. This commit adds support for the
Bluetooth initialization script used across Digi platforms, specifically for
ConnectCore MP13 and MP15.
https://onedigi.atlassian.net/browse/DEL-9650
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The USB and SD installers are U-Boot scripts that are practically
identical.
Merge them into a single template with a couple of machine variables that
determine the default device index in U-Boot for the USB or the microSD
card.
Do dynamic substitutions to create the two installers out of the template.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The installer uses the regular rootfs filename or falls back to search
for a squashfs (read-only) rootfs image.
The UUU installers of eMMC-based platforms use an if/elif/else structure
to determine which file exist (in order of preference). Replicate this
structure on the rest of platforms and installers.
This avoids printing an error message if the default rootfs does not exist
but the read-only one does.
Also, reset 'rootfstype' variable if the default rootfs file exists, which
allows to install regular images over a previous read-only system.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We reverted the stub that didn't allow PM when serial boot
was enabled on TF-A. Restore the part of the recipe that
includes USB boot support on NAND boot images.
This reverts commit 24aef482ef.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9629
Fixes commit b143804dbb, since in nativesdk
context MACHINE_FEATURES is reset to SDK_MACHINE_FEATURES, causing OP-TEE
building tools to be missing from the generated SDK.
https://onedigi.atlassian.net/browse/DEL-9663
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding STM32MP_USB_PROGRAMMER=1 to TF-A NAND build allows the images to
boot from either NAND or USB (recovery) however, the source code of TF-A
disallows correct resuming from suspend when either STM32MP_USB_PROGRAMMER
or STM32MP_UART_PROGRAMMER are defined.
Remove this support so that the system can correctly resume from suspend.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9629
This commit fixes the rm command in the adapt_uboot_filenames function to
prevent build failures when the target artifact does not exist, ensuring the
operation is safe in all cases.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 29d32063ac0abb1017756f62f94aec22ce305b60 ("u-boot: kernel-fitimage:
Fix dependency loop if UBOOT_SIGN_ENABLE and UBOOT_ENV enabled") in Poky layer,
the `kernel-fitimage` and `uboot-sign` classes are no longer explicitly
dependent. This change introduced a race condition when inserting the signed
RSA keys into the U-Boot DTB for FIT image verification.
This commit introduces a new step for `do_uboot_assemble_fitimage`, which is
now responsible for injecting the keys into the U-Boot DTB. This logic was
previously handled in the Linux kernel recipe via the `do_assemble_fitimage`
function in previous Yocto versions.
Additionally, a build-time dependency is added between the `do_uboot_assemble_fitimage()`
function and the kernel's `do_kernel_generate_rsa_keys()` task, which is
responsible for generating the RSA keys used to sign the FIT image.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Starting with OP-TEE v4.0.0, the use of a test key is no longer supported.
The Hardware Unique Key (HUK) is now always derived from the programmed OTP bits.
As a result, the Digi custom `CFG_OTP_HUK` flag is obsolete and has been removed.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the memory layout to properly allocate space for the
different FIT image components, while ensuring total memory usage stays below
128 MiB. This avoids overlaps and ensures correct loading on memory-constrained
variants.
Final memory map:
Start of memory: # 0xC0000000
# |
# | 32 MiB reserved
# v
FIT image load address: # 0xC2000000
# |
# | 32 MiB for FIT image
# v
Kernel load address: # 0xC4000000
# |
# | 32 MiB for Kernel
# v
DTB/DTBO load address: # 0xC6000000
# |
# | Size for DTB/DTBO
# v
Total memory mapped: 96 MiB
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In theory, we already had the necessary changes to remove these images, but
two things needed tweaking:
* MULTIUBI_BUILD values use underscores instead of hyphens, so use
underscores to properly remove the default value inherited from
BOOTDEVICE_LABELS.
* STM used to incorporate a custom "stmultiubi" image type in the stm32mp
builds, but they've replaced this with the upstream "multiubi" type.
Reflect this change to avoid generating additional UBI/UBIFS images in
our builds.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
There are several recipes in meta-digi related to features that we haven't
tested in a long time and don't appear in the DEY 5.0 documentation. Remove
them to avoid unexpected behavior.
Said features are:
* Coral TPU support (only supported in DEY 3.2)
* AWS support (removed from default images and docs in DEY 4.0)
* dey-image-tiny (hasn't been maintained since DEY 2.0)
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add the following countries to the CLM Blob file:
- Brazil
- Mexico
- Saudi Arabia
- Hong Kong
- Singapore
- Malaysia
- Taiwan
- Korea
This is the new World CLM Blob file:
- cyfmac4373-sdio_World.clm_blob (11d5fab6659eff491aca1a219ad33b00)
https://onedigi.atlassian.net/browse/DEL-9438
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This overlay contains a workaround to make the USB-OTG
work as USB device when connected to a host.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9610
(cherry picked from commit ec92f5fdd10a61e37ac3778d0d3aa1816bc6b0aa)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
STM's st-machine-common-stm32mp.inc file automatically incorporates "optee" to
MACHINE_FEATURES as long as BOOTSCHEME_LABELS contains "optee". Since we
recently modified the ccmp15's labels to only contain "opteemin", this is no
longer the case, which leads to:
* optee packages (optee-client, optee-os) not getting installed in images and
SDKs
* optee patches for environment encryption not being applied to libubootenv
Add the feature manually to fix these two issues
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
OP-TEE comes in two flavors: optee and opteemin
For NAND-boot images, add support for USB boot as well,
so that the default tf-a image is valid for booting from
either NAND or USB.
We had this for 'optee' flavor but not for 'opteemin'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 9c3916da94 added INSANE_SKIP
"32bit-time" to certain recipes that use 32bit APIs on the ccmp1
SOMs, but forgot to include the `pn-` prefix to really apply to
those recipes.
While on it, add two additional ones on recipes used by NXP 32-bit
platforms.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit updates the firmware binaries for Bluetooth and Wireless interfaces,
aligned with the Cypress Linux WiFi Driver (FMAC) release v6.1.97-2025_0219.
The updated wireless firmware versions are as follows:
- 2FY Wireless chip: v28.10.387.16
- 2AE Wireless chip: v13.10.246.356
These updates are included as part of the imx-scarthgap-jaculus_r1.1 Murata release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
That includes several CVE patches not present of meta-freescale's
23.2.5.imx recipe (which is based in exactly the same revision).
Similar change was done in NXP's meta-imx (see commit
99ceb057fcfdc8151c1488089d5f22363dfdb6d7).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the installer scripts to support CCMP1 platforms under
Yocto 5.0, aligning them with the current behavior used for CCMP2.
Changes include:
- Adding support for the metadata partition, which is now required
- Including the optee/opteemin flavors in boot artifact filenames
- Ensuring the script structure and logic remain consistent with CCMP2 install scripts
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Currently, the final metadata symlink is composed using the TF-A Device Tree
configuration, which includes memory variant details. However, these variants
are not relevant for the metadata binary.
To avoid generating multiple redundant metadata files or using confusing names,
this commit updates the symlink to be composed using the MACHINE variable
instead.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In Yocto 5.0, the boot artifacts for CCMP1 platforms are compiled using the
opteemin flavor. This commit updates the BOOTABLE_ARTIFACTS definition to
reflect that change and properly integrate the boot artifacts into the ZIP
installer.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
After more in-depth testing, we discovered that the flv/ogv video issues on the
ccmp25-dvk don't happen when playing videos with standard resolutions. Since
the workaround consisted of reverting a patch backported from upstream
gstreamer, and it only fixed flv video playback anyway, revert said workaround
and test using videos with standard formats.
This reverts commit e09eff7e1a.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The binaries of certain recipes use 32-bit APIs (ioctl, stat) that produce
build warnings. Add INSANE_SKIP to prevent the warnings.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
ALSA_LIST variable is weakly set through an override (stm32mp1common or
stm32mp2common). When the override is in place, the hard assignment of
the plain variable is not enough, and the value weakly set in
meta-st-stm32mp layer takes precedence over the plain variable hard
assignment.
Clear the variable with the override and move it from machine config files
to the include file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Move BOOTSCHEME_LABELS from common include to platform config
Default to:
- 'opteemin' for ccmp15
- 'optee' for ccmp13
This doesn't change the behavior present in DEY-4.0, where OPTEE in ccmp15
was minimal and running on non-secure DDR.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This override sets other variables, such as STM32MP_SOC_NAME which is used
on the build of the FIP image.
It also makes ST layer append a new UBOOT_CONFIG (default_stm32mp15/13)
that we must remove.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On the new BSP the configuration is called 'optee-nand' and the build
parameters have changed.
We do this override in meta-digi only to incorporate
`STM32MP_USB_PROGRAMMER=1`
parameter, which allows to boot the nand image from USB, too.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The function had into account the memory variants when copying U-Boot
device trees, but not the U-Boot binaries themselves.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit removes kernel headers from the SDK package list to
prevent overwriting the default ones, as there are currently no
ST-specific headers required.
Reference: ebadb27d60
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
When a WiFi card adds additional interfaces (for AP or WiFi direct),
it generates udev triggers that lead the wifi card to fail.
Ignore those events.
The reason of this new behavior is due to poky commit 1e8b49999ad8.
https://onedigi.atlassian.net/browse/DEL-9600
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Configure the FIT_CONF_DEFAULT_DTB in the machine settings to define the
default configuration for the generated FIT image.
https://onedigi.atlassian.net/browse/DEL-9595
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
STM patch nº8 was causing memory mapping errors when playing .flv videos on the
ccmp25-dvk, so revert it.
https://onedigi.atlassian.net/browse/DEL-9466
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.0.1 software package from the meta-st-x-linux-ai
layer.
The update removes support that is now provided directly by the ST layer in
this new version and adapts existing recipes to align with the updated
mechanisms for AI application integration. These changes ensure compatibility
with platforms that feature hardware acceleration (NPU), as well as those that
rely solely on CPU-based inference.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF when using docker, as it
is needed for a correct network interoperability.
Some kernels may have it enabled by default, but others not, so just enable
it for any platform.
https://onedigi.atlassian.net/browse/DEL-9592
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF when using docker, as it
is needed for a correct network interoperability.
Some kernels may have it enabled by default, but others not, so just enable
it for any platform.
https://onedigi.atlassian.net/browse/DEL-9592
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.0.1 software package from the meta-st-x-linux-ai
layer.
The update removes support that is now provided directly by the ST layer in
this new version and adapts existing recipes to align with the updated
mechanisms for AI application integration. These changes ensure compatibility
with platforms that feature hardware acceleration (NPU), as well as those that
rely solely on CPU-based inference.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the default integration of the Flutter framework from the
SDK due to its significant impact on toolchain size, build time, and reliability.
Including Flutter increases the build complexity exponentially, often resulting
in timeouts or failures caused by the large number of recipes involved.
Customers who require Flutter can still enable it manually if needed.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
* Set the OP-TEE base address to 0x7e000000 (32MiB below the first gigabyte
of DDR).
* Update the ATF and OP-TEE memory maps to support up to 4GiB DDR.
This ensures OP-TEE runs reliably across all ccimx8mm memory configurations.
https://onedigi.atlassian.net/browse/DEL-9502
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Flutter is an open source framework for building multi-platform applications
without a graphical backend running. This commit adds support to create a new
DEY image type based on Flutter ready to use for the users.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add a unique patch with the RT functionality between NXP tags (sha1)
'lf-6.6.36-2.1.0' (d23d64eea5111e1607efcce1d601834fceec92cb)
'Real-Time-Edge-v3.1-202503' (f03af81d60b7ae14e03fafa8f4c4289c30a73f93)
https://onedigi.atlassian.net/browse/DEL-9324
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The btnxpuart is the driver used to manage the bluetooth for our i.mx9
modules, so only specify it for the affected platforms.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The patch was recently added to meta-freescale, remove it from our layer to
avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 907531b55c)
The patch was recently added to meta-freescale, remove it from our layer to
avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add UYVY support in order to be aligned with stateful v4l2 codecs
such as v4l2jpegenc.
https://onedigi.atlassian.net/browse/DEL-9546
Change-Id: I8c8e0b328aa3ea2325085d26cad0c14549b25f5a
Reviewed-on: https://gerrit.st.com/c/oeivi/oe/st/meta-opensdk/+/436381
ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>
Tested-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Reviewed-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add also BGRA, ARGB, ABGR formats in order to be aligned with stateful
v4l2 codecs such as v4l2jpegenc.
https://onedigi.atlassian.net/browse/DEL-9546
Change-Id: Ia51f7a93b0a6fbccb3222230e9f0936d2293cbbb
Reviewed-on: https://gerrit.st.com/c/oeivi/oe/st/meta-opensdk/+/436379
Reviewed-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>
Tested-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit conditionally selects the appropriate boot artifacts to include in
the ZIP installer, depending on whether Trustfence is enabled or not.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Both boot artifacts now use the same signed label, so this commit removes
unnecessary logic and updates the UUU install script to support the new boot
artifact naming. It also fixes the detection of signed artifacts by checking
for the presence of the FIP artifact, instead of relying on a U-BOOT artifact
that does not exist on this platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates optee-client support from the meta-st-openstlinux layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.03.19 tag.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit simplifies the recipe by integrating the symlink generation
directly into the main do_deploy() function, removing the need to maintain
both a do_deploy() and a do_deploy:append().
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit addresses two issues in the symlink deployment function:
- do_deploy() should not write directly to DEPLOY_DIR_IMAGE. Instead,
it now uses DEPLOYDIR.
- Expands do_deploy() instead of using SYSROOT_PREPROCESS_FUNCS to ensure that
the original FIP artifacts are created and properly regenerated on each build.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit generalizes the symlink generation to allow creating a final
symlink in the deploy directory, supporting different artifact flavors:
regular, signed or encrypted.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Assembling a FIT image requires that all artifacts are ready before calling
assemble_fitimage(), which occurs before do_install() and after do_compile().
To ensure the Linux kernel recipe provides the final artifacts in the correct
location, this commit replaces the additional do_install() step with an
additional do_compile() step, ensuring that all necessary artifacts are
available before assemble_fitimage().
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit imports the sign-stm32mp bbclass from the meta-st-stm32mp layer to
allow customization. The main customization ensures that the search_path()
function does not raise a build exception if the signing tool or keys are not
present in the PATH before starting the build process.
In our case, we do not need to manually install the tools or generate the keys
beforehand, as this is automatically handled by Yocto in our DEY distribution.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces the necessary settings for the kernel-fitimage class to
enable FIT image generation.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The kernel-fitimage class sets the default configuration using the first
element from the kernel device tree list. This commit ensures that the main DTB
is listed first to enforce the correct default configuration.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces a custom do_compile() function to resolve a signing
issue affecting the final TF-A artifact, where the SoC name does not match the
TF-A device tree name.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit corrects an issue in the sign key processing when the SoC name does
not match the FIP device tree name.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates secure boot support based on the STM32 MPU Ecosystem v6.0
and integrates support for the ConnectCore MP2 platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The FIP flavor for OP-TEE + USB is managed in the meta-st-stm32mp layer through
the "optee-programmer-usb". However, since we do not require the additional
overhead introduced by the STM32CubeProgrammer tool, this commit introduces a
new FIP configuration based on OP-TEE for booting from USB.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the trustfence-stm-signtools package with the latest
versions from the STM32 MPU ecosystem v6.0:
- STM32MP_KeyGen_CLI v2.19.0
- STM32MP_SigningTool_CLI v2.19.0
These tools are deployed as part of STM32CubeProgrammer v2.19.0, adding support
for STM32MP2x processors.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates the X-LINUX-RT expansion package from the
meta-st-x-linux-rt layer, based on the tag
"openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06", for Yocto Scarthgap.
Currently only the STM CCMP2 is supported in kernel 6.6.
https://onedigi.atlassian.net/browse/DEL-9507
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit integrates the X-LINUX-RT expansion package from the
meta-st-x-linux-rt layer, based on the tag
"openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06", for Yocto Scarthgap.
Currently only the STM CCMP2 is supported in kernel 6.6.
https://onedigi.atlassian.net/browse/DEL-9507
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
(cherry picked from commit 96e1e8351d)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit updates several binaries, including the NVRAM and Bluetooth patch
file, based on the latest Murata release imx-scarthgap-jaculus_r1.0. This release
is still based on the Cypress Linux WiFi Driver (FMAC) v6.1.97-2024_1115
(Wireless firmware v28.10.387.10), keeping the wireless firmware unchanged.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit makes the following changes over the original wks file:
- Fixes binary names to match the OP-TEE sdcard flavor
- Fixes the fip-a/b partition UUIDs
- Set a valid rootfs size that allows flash default images
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit defines the device tree file variable used to generate the SD card
image, fixing the build of the bootloader flavor intended for booting from an
SD card.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The sign script has been updated to support AHAB-based modules like the CCIMX8X.
As a result, there is no longer a need to maintain two separate recipes for the
signing scripts. This commit unifies them into a single recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Due to a change in systemd the default home directory is now "/root".
Modify our recipes to match with this change.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We had a SYSROOT_PREPROCESS_FUNCS on the tf-a-stm32mp recipe to
create symlinks to both TF-A and FIP binaries, but the FIP binaries
are now produced by fip-stm32mp recipe.
This had the effect that the files might not be ready.
Duplicate the function in the fip-stm32mp recipe and create the
symlinks for the FIP images there.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Also, add the wifi driver patch and binaries included in
NXP's incremental release to fix the issues on release
'lf-6.6.52-2.2.0'.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update to 5.9.4.1 version following 'lf-6.6.52_2.2.0' NXP release.
This has not been released in meta-freescale yet, so reuse the 5.9.4
recipe and apply the changes from meta-imx.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update to 4.4.0 version following 'lf-6.6.52_2.2.0' NXP release.
This has not been released in meta-freescale yet, so reuse 4.2.0
recipes and apply the changes from meta-imx commit
900356ea1bf71854053266eec4b92adf4552624c.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
imx-boot includes the 'imx-mkimage_git.inc' from meta-freescale, so
redefine the SRCBRANCH and SRCREV for every platform in the bbappend.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe extracts a small set of UAPI header files form the linux-imx tree.
However, the revision these headers are extracted from is already present in
our linux fork, so bitbake is currently fetching the linux-imx repo to obtain
some files that it can also obtain from our fork. This is impractical because
the repo in question is quite large (~2.80 GiB) and only getting larger with
time.
By modifying the recipe to use our linux fork instead of NXP's, we avoid having
to fetch NXP's repo.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This doesn't change the behavior of the linux-dey recipe, all it does is make
the LINUX_GIT_URI variable accessible to any meta-digi recipe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now all platforms support setting the GPIO name instead of an index
as the configuration for the GPIO-enabled secure console.
Repurpose the TRUSTFENCE_GPIO_ENABLE macro to directly set the GPIO
name.
Also take the opportunity to remove TRUSTFENCE_GPIO_ENABLE and
TRUSTFENCE_CONSOLE_PASSPHRASE_ENABLE commented definitions from bbclass
and conf files, and remove a duplicated TRUSTFENCE_CONSOLE_DISABLE
definition from ccmp1.inc.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When ST_OPTEE_DEBUG_TRACE=0, the source code default to a LOG_LEVEL=2
which prints a lot of messages on the boot log.
Reduce it to LOG_LEVEL=1.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
After the rework in 61eb1bfbe6 the metadata
file inside the fip/ subfolder has the default filename 'metadata.bin'.
Use the new symlinks that now live on the deployimgdir.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are clones of 'optee-programmer-uart' and
'optee-programmer-usb' defined in tf-a-stm32mp-config.inc but
do not require to have the STM32MP_DEVICETREE_PROGRAMMER_ENABLE=1
which causes build problems in U-Boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9483
bluez5-init is a Digi custom recipe to collect the init script
needed to bring up the specific platform bluetooth hardware.
CCMP1s do not require any bluetooth init extra action.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The BT interface initialization is occasionally failing with the hci0
interface not being fully up.
Adding the retry solves all those initialization failures.
https://onedigi.atlassian.net/browse/DEL-9287
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This avoids the next warning when builing for STM platforms
WARNING: No recipes in default available for:
meta-digi/meta-digi-arm/recipes-kernel/kernel-modules/kernel-module-nxp-wlan_git.bbappend
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The following TF-A artifacts are deployed to subdirectories of
the image deploydir:
- arm-trusted-firmware/tf-a-<platform>-<bootconfig>.stm32
- arm-trusted-firmware/metadata-<platform>.bin
- fip/fip-<platform>-<bootconfig>.bin
- fip/fip-<platform>-ddr-<bootconfig>.bin
These binaries are not copied to the image deploy dir during
the regular do_deploy(), instead, they are deployed by script
tf_a_sysroot_populate() which is added to SYSROOT_PREPROCESS_FUNCS.
To follow this logic, change the previously wrong do_deploy:append
into a new function and append it also to SYSROOT_PREPROCESS_FUNCS,
so that it is called after the artifacts have really been deployed.
In the existing code, fix the paths and commands, which had some
errors.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9461
A recent meta-freescale update broke the firmware-ele-imx recipe by setting
a default SECO_FIRWARE_NAME value containing a SoC revision macro we don't
have access to (IMX_SOC_REV_LOWER). Like we do for the ccimx93, use our SoM's
override to overwrite the meta-freescale value with our own.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This override was recently added to meta-freescale's graphical package recipes
to easily distinguish between i.MX platforms that use the Vivante driver and
those that use the Mali one. Without this change, a lot of these recipes are
broken, so sync with the latest changes in meta-freescale's imx-base.inc file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We apply a very similar patch to the i.MX fork of weston 12.0.4, but we never
needed this patch for stm32mp platforms because they used to have 10.0.2, which
has wl_shell support. Now that stm32mp platforms use 13.0.1, use the 12.0.4
patch as reference and adapt it so it applies and builds correctly.
This makes it possible to run the LVGL demo on the ccmp25-dvk.
https://onedigi.atlassian.net/browse/DEL-9458
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds a patch to the gcnano-driver-stm32mp recipe to address a
Kernel NULL pointer issue that occurs during uncontrolled shutdown sequences.
This issue causes an unexpected Kernel NULL pointer exception, preventing the
system from powering off.
https://onedigi.atlassian.net/browse/DEL-9449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit increases the maximum rootfs size to 2.5 GB, aligning it with the
default rootfs partition size of 3 GB. This adjustment allows adding all the
functionality required by the user.
https://onedigi.atlassian.net/browse/DEL-9456
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The IW61x, when enabled as AP or P2P (or bridge with AP), generates udev
triggers that lead the wifi card to fail.
Ignore those events.
The reason of this new behavior is due to poky commit 1e8b49999ad8,
"udev-extraconf: fix network.sh script did not configure hotplugged interfaces"
https://onedigi.atlassian.net/browse/DEL-9465
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We tested all tarball compression formats supported by poky, and although bz2
has faster (de)compression time, xz is better in terms of compression ratio:
for all of the rootfs tarballs generated for our currently supported
images/platforms (15 at the moment), the xz format saves an average of 30 MiB
per tarball compared to bz2, totalling up to 450 MiB.
No extra dependencies are pulled in, since xz-native is already being pulled in
for all of our image builds, so the only drawback to this change is the
increased compression time (+7.34s on average per tarball).
https://onedigi.atlassian.net/browse/DEL-9459
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We have these features enabled for our mp1 platforms, and the optee one is
needed in order to pull in the optee-os package to the images/sdk.
https://onedigi.atlassian.net/browse/DEL-9443
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit clears the Cortex-M33 applications list to prevent including all
the Cortex-M33 demo applications from the ST layer. In the future, if we have
custom Digi examples, they should be added here.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
.ext4 files are identical to .ext4.gz, but uncompressed. .tar.xz files are the
exact same as .tar.bz2, but compressed with a different format.
Remove these artifacts to reduce storage overhead and to match the rest of our
platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Both python3-cryptography and python3-pyelftools are needed to compile optee-os
with a Yocto-generated SDK, but we were adding these packages to all i.MX SDKs,
even for platforms that don't use optee. This wouldn't be a problem if it
weren't for the fact that python3-cryptography is implemented in rust, and its
inclusion in the SDKs forces bitbake to generate the rust compiler just for
that package.
Only include these python packages for platforms that use optee.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This replicates meta-imx commit addc08b02f9a, which was added to be able to
re-use packages in i.MX8/i.MX9 builds. Without this change, there are
compilation errors when building recent versions of the onnxruntime package
because some .S files are built with specific -march switches that conflict
with our current tunings. For example, when building for the ccimx8x-sbc-pro:
cc1: error: switch '-mcpu=cortex-a35+crc+crypto' conflicts with '-march=armv8.2-a+fp16' switch [-Werror]
[...]HalfGemmKernelNeon.S:151: Error: selected processor does not support `fmla v20.8h,v16.8h,v0.h[0]'
Using the generic tuning solves this issue, and according to the log in the
original meta-imx commit, this has minimal to no impact on binaries, so use
said tuning in all relevant platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Based on the boot schemes and sources supported for each platform, the boot
artifacts now include this information in their filenames. This commit updates
the filenames accordingly in several recipes.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the required firmware binaries for Bluetooth and Wireless
interfaces and the Murata firmware repositories to match with the latest Murata
release imx-scarthgap-jaculus_r1.0, which is based in the Cypress Linux Wifi
Driver (FMAC) release v6.1.97-2024_1115 (Wireless firmware v28.10.387.10).
https://onedigi.atlassian.net/browse/DEL-9426
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates the necessary changes from the weston-init.bb recipe in
the Poky layer to resolve a rootfs installation issue with the tim-vx-tools
recipe caused by a mismatch in the permissions of the /home/weston folder.
https://onedigi.atlassian.net/browse/DEL-9419
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The value of this variable is always the same within a platform, so it doesn't
make sense to have different variables for it in each recipe that requires it.
While at it, it seems like all currently supported platforms in DEY 5.0 use the
same value of "wayland-1", presumably because they all use similar versions of
wayland/weston. Set this as the default value for all platforms for now. As we
support more platforms, we can adjust this value if needed, but if it ends up
being the same for all platforms, we can just hardcode it.
https://onedigi.atlassian.net/browse/DEL-9404
Co-authored-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit integrates a custom .bbappend to fix a deployment issue of the
final FIP artifact, where the SoC name does not match with the FIP device tree
name.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes kernel headers from the SDK package list to prevent
overwriting the default ones, as there are currently no ST-specific headers
required.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the default FIP generation variables to align with the
common stm32mp2 configuration files from the latest meta-st-stm32mp layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0
(Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated weston recipes and synchronizes it with the
latest v13.0.1 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all unnecessary files after the integration of the latest
ST BSP, based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for
Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest U-Boot v2023.10 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest Linux kernel v6.6.48 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the outdated wayland-protocols recipe and synchronizes it
with the latest v1.33 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated gstreamer recipes and synchronizes it with the
latest v1.22.12 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the gcnano recipes integrated into meta-digi, as a new
version (v6.4.19) has been released in the latest ST BSP, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the scp-firmware recipe, as it has been integrated into the
optee-os recipe with the latest v4.0.0 from the ST BSP release. This update is
based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0
(Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated OPTEE-OS recipes and synchronizes the Digi custom
.bbappend with the latest v4.0.0 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated TF-A recipes and synchronizes the Digi custom
.bbappend with the latest v2.10 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The ccmx91 uses the same AHAB-containerizing command as the ccimx93,
so fix the code to remove the hardcoding check for the ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit in Poky:
https://git.yoctoproject.org/poky/commit/?id=fbace4111441d36026c3b5cd2ef690250ca8c448
changed the naming/symlinking of the different dtb files installed in
the deploy directory. In Yocto 4.0 we had:
146432 nov 19 14:37 ccimx8x-sbc-pro--5.15-r0.6-ccimx8x-sbc-pro-20241119124717.dtb
61 nov 19 14:37 ccimx8x-sbc-pro-ccimx8x-sbc-pro.dtb -> ccimx8x-sbc-pro--5.15-r0.6-ccimx8x-sbc-pro-20241119124717.dtb
61 nov 19 14:37 ccimx8x-sbc-pro.dtb -> ccimx8x-sbc-pro--5.15-r0.6-ccimx8x-sbc-pro-20241119124717.dtb
while in Yocto 5.0:
19 nov 19 17:57 ccimx8x-sbc-pro--6.6-r0.0-ccimx8x-sbc-pro-20241119164948.dtb -> ccimx8x-sbc-pro.dtb
19 nov 19 17:57 ccimx8x-sbc-pro-ccimx8x-sbc-pro.dtb -> ccimx8x-sbc-pro.dtb
151552 nov 19 17:57 ccimx8x-sbc-pro.dtb
Now, the regular file does not have timestamps or platform name suffixes,
so adjust the signing code to reflect this change.
https://onedigi.atlassian.net/browse/DEL-9325
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit changes the audio card name for the
asound configuration and state of the following
platforms:
* CCiMX8X
* CCiMX8M
* CCiMX6UL
https://onedigi.atlassian.net/browse/DEL-9005
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Now that the tool supports OpenSSL 3.2.3, the same version provided by Yocto
5.0 poky, we can simply use the regular Yocto version of the package and link
to it dynamically instead of building a separate version specific for the tool.
Reflect this change in the recipe and include the new binary "mac_dump" in the
package.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
An internal build of openssl is compiled as part of the cst build process,
which is later linked statically to the tool. When building the nativesdk
version of cst, openssl's internal "Configure" tool chooses Yocto's nativesdk
compiler for its compilation (x86_64-deysdk-linux-gcc). However, cst's Makefile
uses host tools by default, meaning it will compile its C files with the host's
gcc and link the final binary with the host's ld. This can lead to errors due
to the Yocto nativesdk compiler including symbols in the openssl libraries that
are unknown to the host's linker.
For example, when attempting to build nativesdk-trustfence-cst in Yocto 5.0 on
Ubuntu 2020.04, the following linker error appears multiple times:
undefined reference to `__isoc23_strtol'
Fix this by making sure cst uses the same toolchain as the one used when
building the internal openssl libraries (and ultimately, when the final binary
is linked together). This doesn't affect the native version of cst, which uses
the host's toolchain.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The way tagged imx-boot images are handled in meta-freescale was changed in
commit 161f1b3e69a3cf011a50e9b742fb8c46d61e41e8. Reflect this in our recipe by
using the same overrides as uuu_bootloader_tag.bbclass to disable the
functionality
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variable was removed from the base imx-boot recipe in meta-freescale
commit c30f12b809a8cf36043b42c67dd8a11f69d9cf77, as it was never being
overridden and always had a value of "imx-boot".
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For some reason, using the '+=' operator instead of ':append' when specifying
the staticdev package's FILES, the original values are overwritten, causing all
of them to get included in the dev package instead. Since some of these files
are static libraries, this causes QA errors.
Replace the '+=' operator with ':append' to fix this.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In meta-freescale commit 4d64dde1686a017ebe2763dd7880563a6fc51b53,
compile_mx8m() was modified to account for possible configuration suffixes in
the dtb filename via the creation of a symlink. In our case, the filename is
the same as the target, causing the dtb to get replaced with a dead symlink.
For now, revert this function to how it was in the kirkstone branch of
meta-freescale to avoid this.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
By default, wpewebkit now depends on flite, a package that is provided by said
layer. To meet this dependency, all platforms that are capable of running
webkit must include this layer.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Check that weston-start exists before modifying it: after a recent change in
poky's weston-init recipe, this file only gets installed in non-systemd images.
Remove hardcoded systemd service path: some of the code ported from
meta-st-openstlinux assumes that the original weston-init systemd services are
installed under /lib, and it uses hardcoded paths to detect them. Yocto 5.0 now
has usrmerge enabled, so the services are installed in /usr/lib instead,
causing the check to fail. Replace the hardcoded path with its respective
variable.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9045
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
poky has reworked the format of image names, hardcoding the IMAGE_NAME_SUFFIX
(.rootfs) into IMAGE_LINK_NAME, the name used for image symlinks. This would
only be considered a cosmetic change if it weren't for the fact that we have
scripts and test infrastructure that relies on the old image name format, and
this change would force us to rework it all.
Remove the suffix from the link name to maintain our image name format, and
reflect this name in our custom image type scripts. Note that this removes
".rootfs" from several files, for example:
* .rootfs.ext4.gz is now .ext4.gz
* .rootfs.cpio.gz.u-boot.tf is now .cpio.gz.u-boot.tf
* .rootfs.ubifs is now .ubifs
* .rootfs.sdcard is now .sdcard
However, symlink names and non-rootfs files (.boot.vfat, .recovery.vfat...)
are unchanged.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
poky commit 56fe6d575e184ed44807fe27e069233da36962ad removed the BSD license in
favor of using more specific ones. Replace BSD in the dtc recipe with the
correct one, which is BSD-2-Clause
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Our do_install() places all firmware files inside of the path in the
{base_libdir} variable, but we were hardcoding /lib in FILES. This is an issue
when using the usrmerge distro feature, because {base_libdir} becomes /usr/lib
instead of /lib. This was causing these recipes to fail.
Fix this by using {base_libdir} in FILES so that it matches do_install().
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These recipes install binaries inside of /sbin, which causes QA errors when
usrmerge is enabled in DISTRO_FEATURES. Said feature is now required for
Yocto 5.0's version of systemd, so keep using the same versions of the tools
and simply move the binaries to /usr/sbin if needed.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variable now has a weak assignment in poky with the default value
"sysvinit", which was overriding our weak assignments.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches were originally backported from U-Boot v2023.07, and now that
u-boot-tools is using v2024.01, they are no longer needed
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove ccimx9-specific versions from the ccimx9 machine file and use the same
package versions for all platforms, except where noted explicitly in
imx-base.inc. Also, reflect the latest ported changes from meta-imx.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since our recipes handle native builds differently, port the latest version
of the recipes from meta-freescale to our layer while keeping our
customizations. Use the same revision for all platforms.
Adapt patches for lf-6.6.23-2.0.0 release and add the "Upstream-Status" tag to
them to avoid QA errors.
For now, use the imx-boot recipe from meta-freescale, but there's a chance we
might need to port the version of the recipe in meta-imx.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe for 4.2.0.imx has been upstreamed, so merge both of our .bb files
for 4.0.0.imx and 4.2.0.imx into a single .bbappend file. Adapt our patches to
support the ccimx93 and ccimx91, and while at it, add the "Upstream-Status"
tag to them to avoid QA errors
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Back in Yocto 4.0, we applied some imx recipe changes exclusively for the
ccimx93 from meta-imx's rel_imx_6.1.55_2.2.0 tag, but now these changes have
been upstreamed in the meta-freescale scarthgap branch. Since there currently
isn't an NXP BSP based on scarthgap, make all platforms use the upstreamed
versions of the recipes, which are the same versions or newer as the ones
available in meta-imx
Remove the recipes for:
* firmware-ele-imx
* gstreamer1.0-plugins-bad
* gstreamer1.0-plugins-base
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-ugly
* gstreamer1.0
* imx-atf
* imx-boot-firmware-files
* imx-codec
* imx-g2d-samples
* imx-m33-demos
* imx-m4-demos
* imx-m7-demos
* imx-parser
* imx-pxp-g2d
* libdrm
* linux-imx-headers
* optee-test
* wayland
* wayland-protocols
* weston
* xwayland
Apply these changes:
* Remove ccimx93-exclusive changes in gstreamer1.0-meta-base
* Modify imx-gst1.0-plugin bbappend so the upstream version is used in all
platforms
* Remove imx-alsa-plugins bbappend so the upstream version is used in all
platforms
* Remove firmware-nxp-wifi bbappend since the files we need to install seem
to already be included in the meta-freescale recipe
* Remove imx-test and imx-lib bbappends since our custom changes have
already been included in the meta-freescale recipes
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* meta-ml was renamed to meta-imx-ml, and its BBFILE_COLLECTIONS was renamed to
imx-machine-learning
* meta-st-stm32mpu-ai was renamed to meta-st-x-linux-ai
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Starting in poky commit 8791c77a4098d62080ecad09d94718eccd7f1a47, there is
now a check to make sure TEMPLATECONF follows specific rules. If we don't abide
by them, an error will occur when creating a project with our mkproject.sh
script. Move the templates to the place they're supposed to be in and reflect
the change in mkproject.sh.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Arturo Buzarra
Hector Palacios
Gonzalo Ruiz
Javier Viguera
Isaac Hermida
Gabriel Valcazar
Christophe Priouzeau
Francisco Gil
Mike Engel