The patch was recently added to meta-freescale, remove it from our layer to
avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add UYVY support in order to be aligned with stateful v4l2 codecs
such as v4l2jpegenc.
https://onedigi.atlassian.net/browse/DEL-9546
Change-Id: I8c8e0b328aa3ea2325085d26cad0c14549b25f5a
Reviewed-on: https://gerrit.st.com/c/oeivi/oe/st/meta-opensdk/+/436381
ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>
Tested-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Reviewed-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add also BGRA, ARGB, ABGR formats in order to be aligned with stateful
v4l2 codecs such as v4l2jpegenc.
https://onedigi.atlassian.net/browse/DEL-9546
Change-Id: Ia51f7a93b0a6fbccb3222230e9f0936d2293cbbb
Reviewed-on: https://gerrit.st.com/c/oeivi/oe/st/meta-opensdk/+/436379
Reviewed-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>
Tested-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit conditionally selects the appropriate boot artifacts to include in
the ZIP installer, depending on whether Trustfence is enabled or not.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Both boot artifacts now use the same signed label, so this commit removes
unnecessary logic and updates the UUU install script to support the new boot
artifact naming. It also fixes the detection of signed artifacts by checking
for the presence of the FIP artifact, instead of relying on a U-BOOT artifact
that does not exist on this platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates optee-client support from the meta-st-openstlinux layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.03.19 tag.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit simplifies the recipe by integrating the symlink generation
directly into the main do_deploy() function, removing the need to maintain
both a do_deploy() and a do_deploy:append().
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit addresses two issues in the symlink deployment function:
- do_deploy() should not write directly to DEPLOY_DIR_IMAGE. Instead,
it now uses DEPLOYDIR.
- Expands do_deploy() instead of using SYSROOT_PREPROCESS_FUNCS to ensure that
the original FIP artifacts are created and properly regenerated on each build.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit generalizes the symlink generation to allow creating a final
symlink in the deploy directory, supporting different artifact flavors:
regular, signed or encrypted.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Assembling a FIT image requires that all artifacts are ready before calling
assemble_fitimage(), which occurs before do_install() and after do_compile().
To ensure the Linux kernel recipe provides the final artifacts in the correct
location, this commit replaces the additional do_install() step with an
additional do_compile() step, ensuring that all necessary artifacts are
available before assemble_fitimage().
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit imports the sign-stm32mp bbclass from the meta-st-stm32mp layer to
allow customization. The main customization ensures that the search_path()
function does not raise a build exception if the signing tool or keys are not
present in the PATH before starting the build process.
In our case, we do not need to manually install the tools or generate the keys
beforehand, as this is automatically handled by Yocto in our DEY distribution.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces the necessary settings for the kernel-fitimage class to
enable FIT image generation.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The kernel-fitimage class sets the default configuration using the first
element from the kernel device tree list. This commit ensures that the main DTB
is listed first to enforce the correct default configuration.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces a custom do_compile() function to resolve a signing
issue affecting the final TF-A artifact, where the SoC name does not match the
TF-A device tree name.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit corrects an issue in the sign key processing when the SoC name does
not match the FIP device tree name.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates secure boot support based on the STM32 MPU Ecosystem v6.0
and integrates support for the ConnectCore MP2 platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The FIP flavor for OP-TEE + USB is managed in the meta-st-stm32mp layer through
the "optee-programmer-usb". However, since we do not require the additional
overhead introduced by the STM32CubeProgrammer tool, this commit introduces a
new FIP configuration based on OP-TEE for booting from USB.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the trustfence-stm-signtools package with the latest
versions from the STM32 MPU ecosystem v6.0:
- STM32MP_KeyGen_CLI v2.19.0
- STM32MP_SigningTool_CLI v2.19.0
These tools are deployed as part of STM32CubeProgrammer v2.19.0, adding support
for STM32MP2x processors.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates the X-LINUX-RT expansion package from the
meta-st-x-linux-rt layer, based on the tag
"openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06", for Yocto Scarthgap.
Currently only the STM CCMP2 is supported in kernel 6.6.
https://onedigi.atlassian.net/browse/DEL-9507
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
(cherry picked from commit 96e1e8351d)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit updates several binaries, including the NVRAM and Bluetooth patch
file, based on the latest Murata release imx-scarthgap-jaculus_r1.0. This release
is still based on the Cypress Linux WiFi Driver (FMAC) v6.1.97-2024_1115
(Wireless firmware v28.10.387.10), keeping the wireless firmware unchanged.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit makes the following changes over the original wks file:
- Fixes binary names to match the OP-TEE sdcard flavor
- Fixes the fip-a/b partition UUIDs
- Set a valid rootfs size that allows flash default images
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit defines the device tree file variable used to generate the SD card
image, fixing the build of the bootloader flavor intended for booting from an
SD card.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The sign script has been updated to support AHAB-based modules like the CCIMX8X.
As a result, there is no longer a need to maintain two separate recipes for the
signing scripts. This commit unifies them into a single recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Due to a change in systemd the default home directory is now "/root".
Modify our recipes to match with this change.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We had a SYSROOT_PREPROCESS_FUNCS on the tf-a-stm32mp recipe to
create symlinks to both TF-A and FIP binaries, but the FIP binaries
are now produced by fip-stm32mp recipe.
This had the effect that the files might not be ready.
Duplicate the function in the fip-stm32mp recipe and create the
symlinks for the FIP images there.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Also, add the wifi driver patch and binaries included in
NXP's incremental release to fix the issues on release
'lf-6.6.52-2.2.0'.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update to 5.9.4.1 version following 'lf-6.6.52_2.2.0' NXP release.
This has not been released in meta-freescale yet, so reuse the 5.9.4
recipe and apply the changes from meta-imx.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update to 4.4.0 version following 'lf-6.6.52_2.2.0' NXP release.
This has not been released in meta-freescale yet, so reuse 4.2.0
recipes and apply the changes from meta-imx commit
900356ea1bf71854053266eec4b92adf4552624c.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
imx-boot includes the 'imx-mkimage_git.inc' from meta-freescale, so
redefine the SRCBRANCH and SRCREV for every platform in the bbappend.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe extracts a small set of UAPI header files form the linux-imx tree.
However, the revision these headers are extracted from is already present in
our linux fork, so bitbake is currently fetching the linux-imx repo to obtain
some files that it can also obtain from our fork. This is impractical because
the repo in question is quite large (~2.80 GiB) and only getting larger with
time.
By modifying the recipe to use our linux fork instead of NXP's, we avoid having
to fetch NXP's repo.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This doesn't change the behavior of the linux-dey recipe, all it does is make
the LINUX_GIT_URI variable accessible to any meta-digi recipe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now all platforms support setting the GPIO name instead of an index
as the configuration for the GPIO-enabled secure console.
Repurpose the TRUSTFENCE_GPIO_ENABLE macro to directly set the GPIO
name.
Also take the opportunity to remove TRUSTFENCE_GPIO_ENABLE and
TRUSTFENCE_CONSOLE_PASSPHRASE_ENABLE commented definitions from bbclass
and conf files, and remove a duplicated TRUSTFENCE_CONSOLE_DISABLE
definition from ccmp1.inc.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When ST_OPTEE_DEBUG_TRACE=0, the source code default to a LOG_LEVEL=2
which prints a lot of messages on the boot log.
Reduce it to LOG_LEVEL=1.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
After the rework in 61eb1bfbe6 the metadata
file inside the fip/ subfolder has the default filename 'metadata.bin'.
Use the new symlinks that now live on the deployimgdir.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are clones of 'optee-programmer-uart' and
'optee-programmer-usb' defined in tf-a-stm32mp-config.inc but
do not require to have the STM32MP_DEVICETREE_PROGRAMMER_ENABLE=1
which causes build problems in U-Boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9483
bluez5-init is a Digi custom recipe to collect the init script
needed to bring up the specific platform bluetooth hardware.
CCMP1s do not require any bluetooth init extra action.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The BT interface initialization is occasionally failing with the hci0
interface not being fully up.
Adding the retry solves all those initialization failures.
https://onedigi.atlassian.net/browse/DEL-9287
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This avoids the next warning when builing for STM platforms
WARNING: No recipes in default available for:
meta-digi/meta-digi-arm/recipes-kernel/kernel-modules/kernel-module-nxp-wlan_git.bbappend
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The following TF-A artifacts are deployed to subdirectories of
the image deploydir:
- arm-trusted-firmware/tf-a-<platform>-<bootconfig>.stm32
- arm-trusted-firmware/metadata-<platform>.bin
- fip/fip-<platform>-<bootconfig>.bin
- fip/fip-<platform>-ddr-<bootconfig>.bin
These binaries are not copied to the image deploy dir during
the regular do_deploy(), instead, they are deployed by script
tf_a_sysroot_populate() which is added to SYSROOT_PREPROCESS_FUNCS.
To follow this logic, change the previously wrong do_deploy:append
into a new function and append it also to SYSROOT_PREPROCESS_FUNCS,
so that it is called after the artifacts have really been deployed.
In the existing code, fix the paths and commands, which had some
errors.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9461
A recent meta-freescale update broke the firmware-ele-imx recipe by setting
a default SECO_FIRWARE_NAME value containing a SoC revision macro we don't
have access to (IMX_SOC_REV_LOWER). Like we do for the ccimx93, use our SoM's
override to overwrite the meta-freescale value with our own.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This override was recently added to meta-freescale's graphical package recipes
to easily distinguish between i.MX platforms that use the Vivante driver and
those that use the Mali one. Without this change, a lot of these recipes are
broken, so sync with the latest changes in meta-freescale's imx-base.inc file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We apply a very similar patch to the i.MX fork of weston 12.0.4, but we never
needed this patch for stm32mp platforms because they used to have 10.0.2, which
has wl_shell support. Now that stm32mp platforms use 13.0.1, use the 12.0.4
patch as reference and adapt it so it applies and builds correctly.
This makes it possible to run the LVGL demo on the ccmp25-dvk.
https://onedigi.atlassian.net/browse/DEL-9458
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds a patch to the gcnano-driver-stm32mp recipe to address a
Kernel NULL pointer issue that occurs during uncontrolled shutdown sequences.
This issue causes an unexpected Kernel NULL pointer exception, preventing the
system from powering off.
https://onedigi.atlassian.net/browse/DEL-9449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit increases the maximum rootfs size to 2.5 GB, aligning it with the
default rootfs partition size of 3 GB. This adjustment allows adding all the
functionality required by the user.
https://onedigi.atlassian.net/browse/DEL-9456
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The IW61x, when enabled as AP or P2P (or bridge with AP), generates udev
triggers that lead the wifi card to fail.
Ignore those events.
The reason of this new behavior is due to poky commit 1e8b49999ad8,
"udev-extraconf: fix network.sh script did not configure hotplugged interfaces"
https://onedigi.atlassian.net/browse/DEL-9465
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We tested all tarball compression formats supported by poky, and although bz2
has faster (de)compression time, xz is better in terms of compression ratio:
for all of the rootfs tarballs generated for our currently supported
images/platforms (15 at the moment), the xz format saves an average of 30 MiB
per tarball compared to bz2, totalling up to 450 MiB.
No extra dependencies are pulled in, since xz-native is already being pulled in
for all of our image builds, so the only drawback to this change is the
increased compression time (+7.34s on average per tarball).
https://onedigi.atlassian.net/browse/DEL-9459
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We have these features enabled for our mp1 platforms, and the optee one is
needed in order to pull in the optee-os package to the images/sdk.
https://onedigi.atlassian.net/browse/DEL-9443
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit clears the Cortex-M33 applications list to prevent including all
the Cortex-M33 demo applications from the ST layer. In the future, if we have
custom Digi examples, they should be added here.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
.ext4 files are identical to .ext4.gz, but uncompressed. .tar.xz files are the
exact same as .tar.bz2, but compressed with a different format.
Remove these artifacts to reduce storage overhead and to match the rest of our
platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Both python3-cryptography and python3-pyelftools are needed to compile optee-os
with a Yocto-generated SDK, but we were adding these packages to all i.MX SDKs,
even for platforms that don't use optee. This wouldn't be a problem if it
weren't for the fact that python3-cryptography is implemented in rust, and its
inclusion in the SDKs forces bitbake to generate the rust compiler just for
that package.
Only include these python packages for platforms that use optee.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This replicates meta-imx commit addc08b02f9a, which was added to be able to
re-use packages in i.MX8/i.MX9 builds. Without this change, there are
compilation errors when building recent versions of the onnxruntime package
because some .S files are built with specific -march switches that conflict
with our current tunings. For example, when building for the ccimx8x-sbc-pro:
cc1: error: switch '-mcpu=cortex-a35+crc+crypto' conflicts with '-march=armv8.2-a+fp16' switch [-Werror]
[...]HalfGemmKernelNeon.S:151: Error: selected processor does not support `fmla v20.8h,v16.8h,v0.h[0]'
Using the generic tuning solves this issue, and according to the log in the
original meta-imx commit, this has minimal to no impact on binaries, so use
said tuning in all relevant platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Based on the boot schemes and sources supported for each platform, the boot
artifacts now include this information in their filenames. This commit updates
the filenames accordingly in several recipes.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the required firmware binaries for Bluetooth and Wireless
interfaces and the Murata firmware repositories to match with the latest Murata
release imx-scarthgap-jaculus_r1.0, which is based in the Cypress Linux Wifi
Driver (FMAC) release v6.1.97-2024_1115 (Wireless firmware v28.10.387.10).
https://onedigi.atlassian.net/browse/DEL-9426
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates the necessary changes from the weston-init.bb recipe in
the Poky layer to resolve a rootfs installation issue with the tim-vx-tools
recipe caused by a mismatch in the permissions of the /home/weston folder.
https://onedigi.atlassian.net/browse/DEL-9419
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The value of this variable is always the same within a platform, so it doesn't
make sense to have different variables for it in each recipe that requires it.
While at it, it seems like all currently supported platforms in DEY 5.0 use the
same value of "wayland-1", presumably because they all use similar versions of
wayland/weston. Set this as the default value for all platforms for now. As we
support more platforms, we can adjust this value if needed, but if it ends up
being the same for all platforms, we can just hardcode it.
https://onedigi.atlassian.net/browse/DEL-9404
Co-authored-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit integrates a custom .bbappend to fix a deployment issue of the
final FIP artifact, where the SoC name does not match with the FIP device tree
name.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes kernel headers from the SDK package list to prevent
overwriting the default ones, as there are currently no ST-specific headers
required.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the default FIP generation variables to align with the
common stm32mp2 configuration files from the latest meta-st-stm32mp layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0
(Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated weston recipes and synchronizes it with the
latest v13.0.1 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all unnecessary files after the integration of the latest
ST BSP, based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for
Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest U-Boot v2023.10 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest Linux kernel v6.6.48 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the outdated wayland-protocols recipe and synchronizes it
with the latest v1.33 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated gstreamer recipes and synchronizes it with the
latest v1.22.12 from the meta-st-openstlinux layer, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the gcnano recipes integrated into meta-digi, as a new
version (v6.4.19) has been released in the latest ST BSP, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Javier Viguera
Gabriel Valcazar
Christophe Priouzeau
Arturo Buzarra
Isaac Hermida
Francisco Gil
Hector Palacios
Gonzalo Ruiz