Virtual keyboard was not showing up when clicking on the keyboard icon
in the menu bar. The reason was the keyboard xsession script was not
being run on X startup due to the extension '.shbg' of the original
script.
https://jira.digi.com/browse/DEL-911
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Formfactor config files are needed in now so the touchscreen calibration
is loaded on target's boot. Otherwise the touch is not calibrated.
https://jira.digi.com/browse/DEL-910
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bbappend only has a patch that does not apply anymore to the new
version of the package upstream (11.09.02).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
To be sure the 'cfg80211' module is settled down before the
'ath6kl_sdio' module tries to use it.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Version v3.4p6 seems to have some problems with WEP encription. Version
v3.4p4 seems to work better with WEP, so revert to that version.
https://jira.digi.com/browse/DEL-843
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This comes from the old Danny release where pulseaudio in minimal image
was giving a build failure (probablye due to dependences on X libraries)
This is not true anymore in Dylan, so just remove it for easier
maintenance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There seems to be a race condition in the load of the 'cfg80211' and
'ath6kl_sdio' modules. If we try to load the atheros module before the
cfg80211 is settled down, the driver crash.
The workaround is just separate the load of both modules in two separate
'modprobe' commands and add a small delay between them.
https://jira.digi.com/browse/DEL-814
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not well supported yet and cleans a debug line:
ath6kl: ath6kl_cfg80211_connect: sme->mfp = 0
https://jira.digi.com/browse/DEL-815
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Give priority to FSL AAC decoder over others from the community when
using gstreamer's playbin2 or gplay
This allows to play some videos that fail otherwise.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Without the fix if we only configure *one* display in the vssconfig file
(i.e. we set just one entry in that file) the patch was discarding that
configuration and overwriting the configuration with dual display
defaults.
But configuring a single display in vssconfig should be doable, so fix
the patch to allow that.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We found that the gst-fsl-plugin package from Yocto is not exactly the
same than the one we used in DEL even though they have the same
version.
We think the one we used in DEL (released by FSL via LTIB) is more
recent and has some fixes, so create a first patch that applies on top
of the one in Yocto and convert it to the one in DEL.
Also instead of appending new patches to meta-fsl-arm SRC_URI, override
completely the variable and add the patches from meta-fsl-arm layer in
our own layer.
The final result is: we use the yocto tarball, then apply a first patch
that converts it to the one in DEL/LTIB, then apply the patches from
meta-fsl-arm and finally the ones added by us.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Fix the patch that adds support to select the framebuffer for
mfw_v4lsink. This used to work on non-graphical images (non-X), but it
had the side effect of breaking playing accelerated videos on graphical
images (using X) with graphica applications (QT, GTK).
This fix simplifies the patch so it still adds the dual display
functionality while not breaking the graphic media player applications.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Disable integer vorbis plugin as it conflicts with other vorbis
plugins. Error:
error: GLib-GObject-WARNING **: cannot register existing type `GstVorbisDec'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wpa_supplicant v2.0 was not available in Danny so we needed the whole
recipe, but it was updated in Dylan, so now we just need the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The Linux kernel revision was splitted from main bitbake recipe to its
own linux-dey-rev file so that file could be used for linux-headers
recipe to build the toolchain using custom kernel headers (from our
repository).
That is not the recommended way to build a toolchain:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=babbf7a46acaefd9b36031483cafce053f607e66
and we are not using our kernel headers to build the toolchain anymore,
so just melt the linux-dey-rev files into the linux-dey bitbake recipes
for cleanness and easier maintenance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The wireless module occasionally fails to load in kernel v3.10.
If that is the case, unload the driver and load it again (up to
five retries).
Notes:
- Only the ath6kl_sdio module needs to be unloaded and reloaded.
- The chip is not issued a power cycle via CHIP_PWD_L because
this demonstrated to cause failure, instead of improving
behaviour.
- The 2-seconds sleep after unloading the driver is a security
measure to avoid other problems seen during test cycle.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-820
Committed a patch in linux-dey repo to fix perf build. At the same
time update linux-dey revision to get the perf fix.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was supported in kernel 2.6.35 (FSL release) but not in community
kernel 3.10
https://jira.digi.com/browse/DEL-839
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The source has machine specific code, so it needs the machine passed
in the compiler command line.
https://jira.digi.com/browse/DEL-863
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the BOARD selection out of the bootlets recipe so it can be used
from machines defined in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the IMX udev rules can be used without meta-digi-dey layer. For
example when building core-image-minimal with poky distro.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Hector Palacios