These packages create dependency issues when compiling framebuffer images, and
they aren't essential. Include them only in ccimx6 images.
This reverts commit 2edb127d28.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The sources for this package do not exist anymore, causing the build to fail
unless said sources can be obtained via a mirror.
https://jira.digi.com/browse/DEL-6147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Currently, it isn't possible to wake up the ccimx8x after suspending to RAM.
For now, use the less strict "freeze" low power mode instead.
https://jira.digi.com/browse/DEL-6148
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe's contents are unchanged, but the version number in the recipe name
will now match the rest of the vivante-related recipes.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The package is now available for download on NXP's mirror, so we can fully sync
our recipe with the one in meta-fsl-bsp-release.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also remove our .bbappend, since it's not needed anymore after updating our
machine overrides.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These packages are required for videos to play properly on the ccimx8x. Also,
add gstreamer1.0-libav explicitly since the only package that depends on it
(gst-player-bin) was removed from packagegroup-core-x11-sato.
https://jira.digi.com/browse/DEL-6026
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is done in meta-fsl-bsp-release when building xwayland images, so port it
to our layer.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This updates our Qt5 packagegroup with all of the packages included in NXP's
fsl-image-qt5-validation-imx.bb.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This merges our Qt5 recipes with the ones in meta-fsl-bsp-release.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These recipes update Qt5, its plugins and adds wayland support.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some of these recipes might not be strictly necessary for xwayland to work, but
they are related, so I have added them just in case.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
vpx was wrongly removed when updating the recipe to version 1.14, but it's
required to build x11 images for the ccimx6ulsbc.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The newer version used for the ccimx8x has a different license, so its checksum
must be changed.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package depends on libg2d, and the latest version of this library's
sources for imx6 platforms are currently unavailable. Among other things, the
newer sources add a symbol needed by imx-gst1.0-plugin to compile, so this
patch manually adds the symbol as a macro in the package's source code.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The aarch32 recipe will remain the same for now, since the newer sources aren't
yet available in NXP's mirrors.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The most important change here is the package's revision.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We now have different tarballs for each CPU architecture we compile for. Also,
add support for the aarch64 tarball.
https://jira.digi.com/browse/DEL-6046
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their SOM support is
currently unavailable.
https://jira.digi.com/browse/DEL-6049
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Display Processing Unit (DPU) on the i.MX8 is what NXP used to call
Image Processing Unit (IPU) on the i.MX6 family.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 15139a3e97 wrongly removed 'vpx' from plugins-good which
is needed to play WebM files on the CC6UL.
The packagegroup-dey-gstreamer also needed to be updated to use
'pulseaudio' from plugins-good which was apparently renamed from 'pulse'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
(cherry picked from commit 29add13409)
adc_sample:
- extend list of supported devices with MCA_CC8X
adc_cmp_sample:
- Add '-t' argument to specify the type of device.
- Added checking of threshold ranges to avoid confusion between
raw and voltage configurations.
https://jira.digi.com/browse/DEL-6001
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Commit 15139a3e97 wrongly removed 'vpx' from plugins-good which
is needed to play WebM files on the CC6UL.
The packagegroup-dey-gstreamer also needed to be updated to use
'pulseaudio' from plugins-good which was apparently renamed from 'pulse'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
- For most examples, since they apply to all platforms, remove
COMPATIBLE_MACHINE.
- For recipes related to specific hardware, add support to the new platform
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
While on it:
- add dey-examples-rtc unconditionally (rtc is never in MACHINE_FEATURES)
- add missing recipes: digiapix, cryptochip
- re-order them alphabetically.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit:
- moves the files in platform folders 'ccimx6qsbc' and 'ccimx6ul' to the
recipe's folder (they are the same).
- moves the install instructions for virtual wlan and wlan1 into functions
that can be reused by both platforms.
- moves the bridge example install instruction to the generic do_install()
since it's the same for all.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 15139a3e97 removed all gstreamer plugins recipes
but NXP meta-fsl-bsp-release still contains .bbappends that
this commit re-adds.
Besides, the imx-gst1.0-plugin recipe contained a patch by Digi
that was also wrongly removed and that this commit re-adds without
the version on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
meta-freescale rocko branch now sources gstreamer and its plugins
from repositories in codeaurora that contain all patches, so these
recipes are no longer required in meta-digi.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
(cherry picked from commit 105ab7a89b)
Commit 105ab7a89b removed all gstreamer plugins recipes
but NXP meta-fsl-bsp-release still contains .bbappends that
this commit re-adds.
Besides, the imx-gst1.0-plugin recipe contained a patch by Digi
that was also wrongly removed and that this commit re-adds without
the version on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
This is taken from meta-fsl-bsp-release layer at branch 'rocko-4.9.88-2.0.0_ga'
at SHA1 d65692ecb3a4.
A *.bbappend is required to explicitly set COMPATIBLE_MACHINE.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
- These have been taken from meta-fsl-bsp-release layer at branch
'rocko-4.9.88-2.0.0_ga', SHA1 d65692ecb3a4.
- Old recipes have been removed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
meta-freescale rocko branch now sources gstreamer and its plugins
from repositories in codeaurora that contain all patches, so these
recipes are no longer required in meta-digi.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
- The variable containing the list of patches has been renamed to a more
generic prefix QCA65XX_.
- The ConnectCore 8X uses GPIO3_10 (394) for BT_EN.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
This is taken from meta-fsl-bsp-release layer at bb80ba5a0104.
The file had a few commented lines for Wayland that have been uncommented
to leave them untouched in the commit.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5937
The commit 32a6e809f811e8b3920326330d8225b3dd895f70 from the poky layer
breaks the build in the maintenance branch for rocko. This patch updates
the curl base recipe to use the latest version.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The commit 32a6e809f811e8b3920326330d8225b3dd895f70 from the poky layer
breaks the build in the maintenance branch for rocko. This patch updates
the curl base recipe to use the latest version.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Digi Embedded Yocto 2.4-r1.2
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Firmware verification has a side effect in cc6ul sbc express platform
that affects to the bluetooth initialization.
https://jira.digi.com/browse/DEL-5802
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Whenever there's a big time jump due to an outaded RTC being updated via NTP,
detect the jump and update the DHCP lease's expiry times accordingly.
https://jira.digi.com/browse/DEL-5233
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
From python 2.x to python 3.x, the '/' operator changed from integer
division to float division.
Hence, when using one core, 'makejobs' was being evaluated to 0.5.
That caused the evaluation below (makejobs == 0) to return False (0),
therefore PARALLEL_MAKE was evaluated to '-j 0' and the compilation
failed because the 'j' parameter must be strictly postive.
Replace the operator by the integer div operator in python 3.x '//'.
https://jira.digi.com/browse/DEL-5769
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
With the migration from dey-2.2 to dey-2.4, now it is mandatory to include
all required applications for compilation. This fixes the next error:
| make: pkg-config: Command not found
| main.c:20:10: fatal error: cryptoauthlib.h: No such file or directory
| #include <cryptoauthlib.h>
https://jira.digi.com/browse/DEL-5710
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Rarely the bluetooth firmware is not loaded properly and causes
errors in the configuration steps. This verification makes sure
the firmware was loaded and is functional, if not we start the
retry mechanism with the default baudrate to avoid the firmware
corruption in the upload process.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
With the switch to using Bash as command line interpreter, the default
/etc/inputrc configuration file for readline doesn't allow the use of
some keys which are common.
This commit enables them to not change the user experience with previous
DEY versions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5623
The suspend script has conflicts with the suspend from bash, then
we decided to rename our custom suspend script to standby and create
a symlink called suspend to maintain backward compatibility.
https://jira.digi.com/browse/DEL-5622
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The MACHINE_EXTRA_RRECOMMENDS for the ccimx6ul in meta-digi-arm contains
cryptoauthlib. If we want to use meta-digi-arm as a standalone BSP layer
we need to move the cryptoauthlib recipe to meta-digi-arm, that or not make it
a machine dependency.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Option --reference does not exist for busybox chmod/chown, so you get an ugly
error and file rights are modified.
https://jira.digi.com/browse/DEL-5642
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Sync defconfig to enable command 'chvt' because the xserver-nodm
init script requires this command in the stop process to swicth
the foreground virtual terminal after stopping the xserver.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Xserver prints many debug messages by the console output,
this bbappend modifies the init line to redirect the messages
to a log file.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Sync defconfig to enable command 'command' because /etc/profile
of base-files requires this command to be available. If it is not
available the following message is output during login on a image
using busybox.
-sh: command: not found
(From OE-Core rev: e41c90b852167bbcb434da57b84280e855acae33)
https://jira.digi.com/browse/DEL-5632
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bash v4.4 or higher warns when discarding NULL bytes in command substitution
output. Remove these bytes to avoid the undesired warnings.
https://jira.digi.com/browse/DEL-5588
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Currently the default bluez5 package installed is bluez-5.46, but we need this
locally for compiling bluez-5.41 (the stack using in the bluetooth
certification process), so we need to locally apply the same fix ("fix python3
core dependency for testtools") for the testtools and its dependency with
python3-code instead of python3.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Adding the bluetooth testtools does not have a big benefit and increases the
size of the rootfs in 16MB given its dependencies, which is critical in
devices (CC6UL) with a NAND flash.
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
There is not need to specify the testing flag for bluez5 compilation. That flag
is new starting at bluez5.44, and in the past it was called experimental. In
the past it made sense to pass that flag to compile specific services, but most
of them has been migrated to standard features, and experimental has been
renamed to testing, but we do not need any of those testing features.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
In bluez5.41 we needed to specify the "--experimental" flag when starting the
bluetooth service in order to use some specific features (see d434043447).
In bluez5.46 (in fact starting in bluez5.44) code was reorganized and now that
compilation option is called "--testing" but does not exist as flag, because
some of the "experimental" features has been mode to standard features, so
there is not need of indicating any extra flag when starting the service.
https://jira.digi.com/browse/DEL-5624
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This saves ~4MB of space and is not required for device detection.
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This fixes the following warning:
WARNING: auto-serial-console-0.1-r0 do_populate_lic:
${COREBASE}/LICENSE is not a valid license file, please use
'${COMMON_LICENSE_DIR}/MIT' for a MIT License file in LIC_FILES_CHKSUM.
This will become an error in the future.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Rename recipe and fix the path of the progress binary. Also on the
rocko branch of meta-swupdate several signing mechanisms are
supported, and the value is used as a string to determine which one
to use.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
In previous Yocto versions this recipe throws an warning about
the file dependencies however in Yocto 2.4 this throws a build error.
To avoid the build error we skip the QA check at file-level dependencies.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some packages are not updated in meta-freescale/rocko, so we do
need to include some of these.
The patches for gstreamer in the original commit are skipped, as
poky/rocko uses a newer version.
This partially reverts commits:
* 52a10ff88d.
* b06c81b277https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
There is a permissions conflict between qtbase and cmake installing
the environment-setup.d directory. This workaround creates the
directory in the do_install() step to avoid the conflict in the
do_generate_qt_environment_file() step.
https://jira.digi.com/browse/DEL-5583
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Introspection support is currently broken upstream. It is only
used to generate the documentation, so it is safe to remove it.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Solves:
/bin/bash: line 1: glib-mkenums: command not found
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
With Qt 5.8 the Qt Quick 2D renderer is merged into qtdeclarative as
the built-in software rendering backend for the Qt Quick SceneGraph.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Starting in alsa-lib 1.1.3, the package alsa-lib does not exist,
libasound is the real library package.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This is the stack covered by the Bluetooth certification. We will keep
it even though the newer bluez 5.46 will be used by default.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
* 'experimental' has been renamed to 'testing' in Bluez 5.44
* Several patches (0004..0011) are now upstream and can be removed
* QCA specific patches have been refreshed
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All these recipes and patches are now available and maintained in the
meta-freescale layer.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All this recipes only need to be renamed to the new version:
* cherokee
* curl
* imx-codec
* imx-gst1.0-plugin
* imx-parser
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This new version of Qt already has a flag for optimizing for size,
so remove the patch and use this flag instead.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Pending to update the patch for dynamic environment location in NAND.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This tool was only needed for old kernels, newer kernels use the hardware
random number generator themselves.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This variable and all its references were removed in Yocto 2.4
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This class no longer exists, it has been merged with images_types.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
NetworkManager was experiencing an unexpected behavior managing
the network interfaces on a supend/resume process, then to avoid
this undesired behavior the suspend script will stop and restart
the NetworkManager service.
https://jira.digi.com/browse/DEL-5351
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
NetworkManager will be restarted on the suspend script so this workaround is not needed
This reverts commit b3ae030fce.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
After exporting a GPIO or PWM, we need to give some time for udev rules
to complete, before actually trying to access the newly created entries
in the sysfs.
This solves a problem, where udev was setting the mode and group of
the newly created files, so they are accessible for users (not root)
belonging to that group.
For traceability and to be sure the patch applies without conflicts,
this commit also sets a fixed revision to use from the libsoc
repository.
https://jira.digi.com/browse/DEL-5389
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With these changes we tell NM to not manage the wireless interfaces before
unloading the wireless module. This was causing some unexpected behavior that
crashed NetworkManager.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5351https://jira.digi.com/browse/DEL-4571
These udev rules allow to use the digiapix API by a normal user that
belongs to the 'digiapix' group.
https://jira.digi.com/browse/DEL-5232
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recipe modifies the Greengrass Core init script to properly configure the
daemon relative path. This daemon location is different depending on the
Greengrass version being used.
This commits also moves the patch for Greengrass Core 1.0.0 to the
'greengrass-1.0.0' directory in preparation for adding Greengrass Core 1.1.0
recipe in the next commit.
https://jira.digi.com/browse/DEL-5368
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit updates dnsmasq to version 2.78 to include the following
vulnerability patches:
* CVE-2017-13704
* CVE-2017-14491
* CVE-2017-14492
* CVE-2017-14493
* CVE-2017-14494
* CVE-2017-14495
* CVE-2017-14496
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-5136
The current recipe copies binaries for different ARM architectures to
the rootfs.
For the CC6UL we need to save some space, so delete the versions of the
binaries that are not being used.
https://jira.digi.com/browse/DEL-4987
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The current recipe copies binaries for different ARM architectures to
the rootfs.
For the CC6UL we need to save some space, so delete the versions of the
binaries that are not being used.
https://jira.digi.com/browse/DEL-4987
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to specify a different set of gstreamer packages to be
installed per machine. It's mainly used for the CC6UL to define a
minimum set of packages that allows to play a WEBM video, and at the
same time save some space as this platform does not have much storage.
The space saved with this change for the CC6UL and the default QT image
is about ~5MB.
https://jira.digi.com/browse/DEL-4987
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
virtwlans script creates an additional interface on startup for QCA6564 chip.
The created interface purpose is for ap mode, so specify its type on creation.
https://jira.digi.com/browse/DEL-5290
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This creates a new dispatcher action DEVICE_CONNECTIVITY_CHANGE, that
gets triggered whenever one interface fails in the upstream connectivity
check, regardless of the system having connectivity through a different
interface.
https://jira.digi.com/browse/DEL-5210
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Subset of commits to fix the pairing for dual mode devices. Main
commit that fixes is 2d3685252a21cda4b918ad1cc4dd0572bd5c6d3c, but some
previous commits are required as well.
"""
For dual mode devices we need to pass address type used in pairing
events to reply with correct one on agent reply. Otherwise reply for
BR/EDR pairing of dual mode device would use address type (which is
valid only for LE address) resulting in reply being ignored by kernel
and eventually pairing timeout.
"""
https://jira.digi.com/browse/DEL-5226
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
For avoid compilation error due to platform specific patches, first apply
the common patches and later apply platform specific patches.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Create a multiple patch file with the original qualcomm code that adds
support for the qca6564 chip (hcitattach_rome)
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit re-adds the imx-gpu-g2d recipe that was removed
from the imx-gpu-viv v6 driver.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a platform dependency to remove the parts
provided by the new GPU driver and maintain the compatibility
for other platforms using previous versions.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the recipe to update the GPU driver
to the latest version.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The XBee Cellular modem is expected to be at ttymxc1 on CC6UL and
at ttymxc4 on CC6. The changes are needed because in v4.9.11 kernel
the /sys/devices entry for CC6UL and CC6 are the same for the TTYs,
causing that on CC6UL ModemManager was also searching for modems on
ttymxc4.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5163
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit modifies sysinfo tool to use the kernel symlinks for
the devices instead of using the full node path and maintain
compatibility with different kernel versions.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The experimental flag is needed to run the GATT server application.
https://jira.digi.com/browse/DEL-5023
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
These examples show how to use the Digi APIX.
https://jira.digi.com/browse/DEL-5097
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This commit adds the some platform board files and removes
the symbolic link to libsoc.conf
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-5096
This commit enables the IPV6 support that is necessary for the
XBee Cellular LTE Cat1 modem.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-4839
(cherry picked from commit a5cfaa921d)
wlan1 is the interface used for SoftAP, so use that one instead. This also
matches with the 'Network bridging' chapter of the documentation.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit e6beba4cb0)
The bridge example uses the wireless interface and it assumes that it is
initialized, so it must be placed after it.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit d7c8fa4b9a)
This only affects the CC6UL, where by default now 'qtsmarthome' is
installed instead of 'qtbase-examples'.
This serves two purposes:
* Remove the 'qtbase-examples' package from the CC6UL to save space.
* Use 'qtsmarthome' as a demo of a QML application running on the CC6UL
using Qt Quick 2D Renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 4c5a7fd3f8)
Instead of having a recipe to add launchers for a bunch of applications
(most of them are not available anymore) move the qtsmarthome launcher
to the recipe that installs the package.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 64010754d0)
The demo application uses 'svg' images, so at runtime it depends on
'qtsvg-plugins' package.
Also add a patch to fix a runtime warning:
Both point size and pixel size set. Using pixel size
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 48ff14dc78)
This is an alternative software based renderer for QtQuick2
applications for hardware that doesn't have a GPU.
This is the case of the CC6UL. It does not have a GPU, so the only way
to run QML applications is using this software renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit e623c365ff)
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
(cherry picked from commit 9c5774ed62)
In the past QT package did include some fonts, but not anymore. New
versions of QT do rely on an external font package being installed in
the rootfs.
Without fonts the QT applications just show up in the screen but
obviously with no text at all.
https://jira.digi.com/browse/DEL-4724
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 02547c6530)
This patch makes smaller libQt libraries saving some space in the CC6UL
rootfs.
Libraries size before the patch:
root@ccimx6ulsbc:~# ls -l /usr/lib/libQt*5.7.1
22448 Aug /usr/lib/libQt5Concurrent.so.5.7.1
5347036 Aug /usr/lib/libQt5Core.so.5.7.1
508464 Aug /usr/lib/libQt5DBus.so.5.7.1
4419712 Aug /usr/lib/libQt5Gui.so.5.7.1
1367776 Aug /usr/lib/libQt5Network.so.5.7.1
275900 Aug /usr/lib/libQt5OpenGL.so.5.7.1
341688 Aug /usr/lib/libQt5PrintSupport.so.5.7.1
88628 Aug /usr/lib/libQt5SerialPort.so.5.7.1
290960 Aug /usr/lib/libQt5Sql.so.5.7.1
212432 Aug /usr/lib/libQt5Test.so.5.7.1
5306588 Aug /usr/lib/libQt5Widgets.so.5.7.1
894928 Aug /usr/lib/libQt5XcbQpa.so.5.7.1
191404 Aug /usr/lib/libQt5Xml.so.5.7.1
Libraries size after the patch:
root@ccimx6ulsbc:~# ls -l /usr/lib/libQt*5.7.1
18352 Aug /usr/lib/libQt5Concurrent.so.5.7.1
4032380 Aug /usr/lib/libQt5Core.so.5.7.1
303684 Aug /usr/lib/libQt5DBus.so.5.7.1
2867436 Aug /usr/lib/libQt5Gui.so.5.7.1
839428 Aug /usr/lib/libQt5Network.so.5.7.1
239044 Aug /usr/lib/libQt5OpenGL.so.5.7.1
267976 Aug /usr/lib/libQt5PrintSupport.so.5.7.1
59960 Aug /usr/lib/libQt5SerialPort.so.5.7.1
172192 Aug /usr/lib/libQt5Sql.so.5.7.1
171500 Aug /usr/lib/libQt5Test.so.5.7.1
4282740 Aug /usr/lib/libQt5Widgets.so.5.7.1
616420 Aug /usr/lib/libQt5XcbQpa.so.5.7.1
154556 Aug /usr/lib/libQt5Xml.so.5.7.1
https://jira.digi.com/browse/DEL-4644
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit c62d5e1e42)
This commit enables the IPV6 support that is necessary for the
XBee Cellular LTE Cat1 modem.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-4839
This commit creates a new file called 'dey-version-${REAL_MULTIMACH_TARGET_SYS}'
(for example, 'dey-version-cortexa7hf-neon-dey-linux-gnueabi') at the same level
as 'version-${REAL_MULTIMACH_TARGET_SYS}',
'site-config-${REAL_MULTIMACH_TARGET_SYS}', and
'environment-setup-${REAL_MULTIMACH_TARGET_SYS}' files.
The file contains the following parameters:
* Machine. The name of the platform the toolchain was built for (ccimx6sbc,
ccimx6ulsbc, ccimx6ulstarter).
* Version: A versioning system for the generated toolchains. Currently is the
distro version followed by the timestamp on which the current build started.
* Image: The name of the image that triggered the population of the SDK
(core-image-base, dey-image-aws, dey-image-qt-${GRAPHICAL_BACKEND})
The purpose of the 'dey-version-*' file is to be parsed by Eclipse so toolchains
can be autodetected.
This file is packaged with the rest of SDK/toolchain resources ('version-*',
'site-config-*', and 'environment-setup-*' files, and 'sysroots' directory)
when creating the SDK tarball and later the installation script.
The 'dey-version-*' file could also be created in a 'meta-environment.bbappend'
appending to the 'create_sdk_files()'. But from this recipe there is no access
to the name of the image that triggers the creation of the SDK (core-image-base,
dey-image-aws, dey-image-qt, etc.).
Currently, we are redefining 'SDK_POSTPROCESS_COMMAND' (from
'poky/meta/classes/populate_sdk_base.bbclass') to insert the generation of the
'dey-version-*' file just before creating the SDK tarball.
https://jira.digi.com/browse/DEL-5074
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
NM launches 'dnsmasq' using DBus, so enable DBus support at compile
time. Also remove the symlinks in the different runlevels, so it's not
launched by the included bootscript.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed in the context of network failover, so when one physical
interface is lost, you can still resolve the connectivity-check URL
using the local DNS cache.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The implemented patch fails when NetworkManager uses a local DNS cache
underneath (like 'dnsmasq'). To access the local DNS cache it needs to
use the loopback interface and hardcoding the physical interfaces make
the connectivity check fail.
This reverts commit c9b02d6288.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the same interface that it's being checked for the DNS resolution.
This makes connectivity check work in an scenario where the primary
interface has lost connectivity (for example ethernet) but you still
have connectivity through a secondary interface (e.g. wireless).
What happens in that case is that even though you have correct
connectivity in the secondary interface the check fails because it does
not use that secondary interface to resolve the name of the test URL.
The result is that the connectivity check assumes that this secondary
interface is also failing and it penalizes the metrics in the routing
table.
This commit uses libcurl's CURLOPT_DNS_INTERFACE to set the DNS
interface. Notice that this requires 'libcurl' to be compiled with
'--enable-ares'.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is required to use '--dns-interface' runtime parameter to instruct
'curl' to use a specific interface for DNS resolution.
We need this in the context of the network failover support, where
NetworkManager does the connectivity check, by trying to connect to a
configured URL through the different interfaces available, and for this
check it uses 'libcurl' underneath.
If you try to use this functionality without this build time option
enabled, you get:
curl: (4) A requested feature, protocol or option was not found built-in
in this libcurl due to a build-time decision.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This library will provide a common API to access Digi hardware interfaces and/or
other features.
https://jira.digi.com/browse/DEL-4979
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
If two or more targets are in the same environment, all of them will
broadcast the same SSID, which may be a problem when a client wants
to connect to a specific device.
Use the last bytes of the non-virtual wireless MAC for the name of the
SSID, a random value with no hexadecimal characters is used if the MAC
is not available.
Also drop 'wpa2aes' from the SSID.
https://jira.digi.com/browse/DEL-4129
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Turns out that the busybox' fdisk applet is also able to parse the GPT
partition tables. This saves around 0.5 MiB of space.
https://jira.digi.com/browse/DEL-4565
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
wlan1 is the interface used for SoftAP, so use that one instead. This also
matches with the 'Network bridging' chapter of the documentation.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The bridge example uses the wireless interface and it assumes that it is
initialized, so it must be placed after it.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This only affects the CC6UL, where by default now 'qtsmarthome' is
installed instead of 'qtbase-examples'.
This serves two purposes:
* Remove the 'qtbase-examples' package from the CC6UL to save space.
* Use 'qtsmarthome' as a demo of a QML application running on the CC6UL
using Qt Quick 2D Renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of having a recipe to add launchers for a bunch of applications
(most of them are not available anymore) move the qtsmarthome launcher
to the recipe that installs the package.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The demo application uses 'svg' images, so at runtime it depends on
'qtsvg-plugins' package.
Also add a patch to fix a runtime warning:
Both point size and pixel size set. Using pixel size
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an alternative software based renderer for QtQuick2
applications for hardware that doesn't have a GPU.
This is the case of the CC6UL. It does not have a GPU, so the only way
to run QML applications is using this software renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In the past QT package did include some fonts, but not anymore. New
versions of QT do rely on an external font package being installed in
the rootfs.
Without fonts the QT applications just show up in the screen but
obviously with no text at all.
https://jira.digi.com/browse/DEL-4724
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This patch makes smaller libQt libraries saving some space in the CC6UL
rootfs.
Libraries size before the patch:
root@ccimx6ulsbc:~# ls -l /usr/lib/libQt*5.7.1
22448 Aug /usr/lib/libQt5Concurrent.so.5.7.1
5347036 Aug /usr/lib/libQt5Core.so.5.7.1
508464 Aug /usr/lib/libQt5DBus.so.5.7.1
4419712 Aug /usr/lib/libQt5Gui.so.5.7.1
1367776 Aug /usr/lib/libQt5Network.so.5.7.1
275900 Aug /usr/lib/libQt5OpenGL.so.5.7.1
341688 Aug /usr/lib/libQt5PrintSupport.so.5.7.1
88628 Aug /usr/lib/libQt5SerialPort.so.5.7.1
290960 Aug /usr/lib/libQt5Sql.so.5.7.1
212432 Aug /usr/lib/libQt5Test.so.5.7.1
5306588 Aug /usr/lib/libQt5Widgets.so.5.7.1
894928 Aug /usr/lib/libQt5XcbQpa.so.5.7.1
191404 Aug /usr/lib/libQt5Xml.so.5.7.1
Libraries size after the patch:
root@ccimx6ulsbc:~# ls -l /usr/lib/libQt*5.7.1
18352 Aug /usr/lib/libQt5Concurrent.so.5.7.1
4032380 Aug /usr/lib/libQt5Core.so.5.7.1
303684 Aug /usr/lib/libQt5DBus.so.5.7.1
2867436 Aug /usr/lib/libQt5Gui.so.5.7.1
839428 Aug /usr/lib/libQt5Network.so.5.7.1
239044 Aug /usr/lib/libQt5OpenGL.so.5.7.1
267976 Aug /usr/lib/libQt5PrintSupport.so.5.7.1
59960 Aug /usr/lib/libQt5SerialPort.so.5.7.1
172192 Aug /usr/lib/libQt5Sql.so.5.7.1
171500 Aug /usr/lib/libQt5Test.so.5.7.1
4282740 Aug /usr/lib/libQt5Widgets.so.5.7.1
616420 Aug /usr/lib/libQt5XcbQpa.so.5.7.1
154556 Aug /usr/lib/libQt5Xml.so.5.7.1
https://jira.digi.com/browse/DEL-4644
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Busybox's init enabled at build time collide with 'sysvinit' package.
This does not seem a problem when using RPM package manager, but using
IPK instead, the build is broken at image creation time:
Collected errors:
* check_data_file_clashes: Package sysvinit wants to install file <...>/rcS
But that file is already provided by package * busybox
https://jira.digi.com/browse/DEL-4573
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No applet has been enabled or disabled, just the defconfig file has been
refreshed for the current busybox version 1.24.x
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NetworkManager manages the 'resolv.conf' file globally, so there is no
need for pppd specific scripts for DNS.
These scripts race with NM to set DNS, leading sometimes to a scenario
where you have ethernet as the default gateway, but with DNS only
reachable via cellular.
While on it, also remove not used 'mm_cellular' configuration file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some modems (e.g. the XBee Cellular LTE Cat 1) have a long initilization
process and are not available when ModemManager tries to detect them
on boot.
For those modems schedule a rescan a bit later after NetworkManager has
been launched, so they are detected properly.
https://jira.digi.com/browse/DEL-4661
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These values configure the PPP daemon to check that the connection is
still alive (using an echo) and kill itself otherwise. On that event,
NetworkManager takes over and tries to restore the connection.
This is specially useful for modems with only one serial port, because
they are not able to signal the connectivity loss to the host (the only
data channel is used for the network data itself).
https://jira.digi.com/browse/DEL-4653https://jira.digi.com/browse/DEL-4650
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Use the 1.8.x stable series, as it has some desired functionality (e.g.
connectivity check) and bug fixes over the default version included in
Yocto.
https://jira.digi.com/browse/DEL-4628
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name of the repository in Github is fixed, because it is a fork from
the original repository.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This commit includes the Python3-Json package that is required now
by QT creator python scripts when debugging an application with GDB
on the target.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
For P2P interfaces, some drivers (CC6UL) create auxiliar interfaces based
on the parent one, like p2p-p2p0-0.
This commit adds a p2p* pattern to the list of unmanaged devices so that
NetworkManager doesn't try to manage P2P devices.
https://jira.digi.com/browse/DEL-4649
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The removed distro features are mostly corner cases, not widely used,
and sometimes conflict with other packages serving the same purposes.
For example:
* '3g' only adds ofono for cellular support, while we are
using ModemManager.
* 'nfc' adds 'neard' the NFC daemon (which at the moment we don't
support)
* 'zeroconf' adds 'avahi' package, but we are using NetworkManager
instead to manage the network interfaces.
* 'nfs' adds 'rpcbind' server, which is not needed at all to have
an NFS mounted rootfs.
Needless to say that all those packages can be added to any image
without having the distro features enabled, or if preferred, you can add
the distro features back in the project's local.conf.
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As we are using kernel's DEVTMPFS, using udev-cache on top of it does
not add much advantage. Disabling it has the extra advantage of avoiding
writing the udev-cache tarball under '/etc' (which probably won't work
on a read-only system).
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When bringing down the wireless interface used for hostapd, the messages
overlap:
# ifdown wlan1
Stopping HOSTAP Daemon: stopped /usr/sbin/hostapd (pid 569)
hostapd.
Adding the 'quiet' option to start-stop-daemon command fixes the
cosmetic issue.
# ifdown wlan1
Stopping HOSTAP Daemon: hostapd.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
"glibc-gconv" packages are GLIBC library specific, so add the proper
override to fix the build of the package using other C libraries (e.g.
MUSL).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the IOExpander is not programmed but the kernel is running its driver,
the following messages will appear when running sysinfo:
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/hw_version': No such file or directory
cat: can't open '/sys/devices/platform/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-006e/fw_version': No such file or directory
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Now the suspend script brings down all the wireless interfaces that are
managed by ifupdown command (in the '/etc/network/interfaces' file) and
then unloads the wireless driver.
On resume the script triggers an event so udev reloads the wireless
driver and then brings up the interfaces that were brought down on
suspend.
https://jira.digi.com/browse/DEL-4288
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The cellular interface is now managed by NetworkManager, so there is no
need for this custom script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the interfaces that are managed by Networkmanager
from the /etc/network/interfaces entry.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
So the package can be compiled in a non-X11 graphical system.
https://jira.digi.com/browse/DEL-4289
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Disabled: dnsmasq and netconfig
* Enabled: cellular related options and connectivity check
https://jira.digi.com/browse/DEL-4289
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If values are provided in the local.conf, the package will have the
'config.json' file preconfigured.
https://jira.digi.com/browse/DEL-4274
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rename the class so it's not specific to the C version of the AWS IoT
Device SDK, and can be used for anything related with AWS IOT (for
example Greengrass).
https://jira.digi.com/browse/DEL-4274
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This avoids the following errors:
ERROR: dey-examples-opengles-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary
and when cleaning:
ERROR: dey-examples-opengles-1.0-r0 do_configure: oe_runmake failed
| make: *** No rule to make target 'clean'. Stop.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This recipe allows to generate the swu update package to be used with SWUpdate.
The package can be generated using:
bitbake dey-image-aws-swu
https://jira.digi.com/browse/DEL-4304
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
In the recovery images we are using a custom init so we are not executing
any post-installation that is required for a correct rootfs setup, so call
all the post installation scripts from our custom init.
The package installation could be ipk, rpm or deb, so call to the
*postint folder.
Given that the recovery rootfs is a ramdisk, there is no need to remove the
post installation scripts.
https://jira.digi.com/browse/DEL-4430
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The fix in 0ae172613a wrongly printed
a new line after each value, wich resulted in the following output for a
command like this, that reads two 32-bit words:
root@ccimx6ulsbc:~# memwatch -r -l 8 -w -a 0x2008008
0x02008008: 0x0070e501
0x00000100
Instead, it should print a line feed after every 16 bytes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit updates the spidev_test application from Linux kernel upstream
at /tools/spi/spidev_test.c adding support to new features
commit: 9006a7b3220e7293ef8bc1ac9bba6c54411051c1
https://jira.digi.com/browse/DEL-4358
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
* Create the certificates directory before copying files into it.
* Give the downloaded tarball a meaningful name (otherwise tarballs
downloaded from GitHub don't have a proper name (only the version) and
may collide with other packages with the same version.
* Allow to create certs package if certs are available at build time.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the event is already signaled, read the timestamp, log and ack the event,
perform actions and exit. If it is already acknowledged, then do nothing.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
Only copy the certificates to the image if they are provided and exists.
https://jira.digi.com/browse/DEL-4339
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit moves awsiotsdk-c recipe into 'recipes-aws' and awsiotsdk-demo into
'recipes-digi/dey-examples'.
https://jira.digi.com/browse/DEL-4339
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This argument now is only valid for the behavior of the comparator in
sleep mode, so it no longer makes sense in this application.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
GG daemon may die due to misconfigurations, but this takes a bit of
time, so wait a bit to check whether the daemon is still alive.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
That's the default assumed by the GG daemon:
$ daemon --help
-gg-home string
home directory of greengrass (default "/greengrass")
As of this version GG daemon may not work properly otherwise.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This library adds support to use the Atmel CryptoAuth device available
in the ConnectCore 6UL.
https://jira.digi.com/browse/DEL-4284
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The readlink command on a real file was expanding to nothing and then
the '/etc/resolv.conf' file was not being updated with the nameservers.
With this change we only run the 'readlink' link command after checking
that the file is actually a symbolic link.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When not enough arguments are given (this includes using only the '-h'
argument for help), show the complete help.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Avoid splitting the boot script message in two different lines:
Starting bluetooth hardware: [OK]
done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new line should be printed after the result, instead of before.
Example:
root@ccimx6sbc:~# memwatch -r -w -a 0x2190034
0x02190034: 0x00000000 root@ccimx6sbc:~#
After this patch:
root@ccimx6sbc:~# memwatch -r -w -a 0x2190034
0x02190034: 0x00000000
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This application tests the MCA comparator feature by configuring
the thresholds, sample rate and other parameters.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/CC6UL-600
After 0e7f5d3a47 both platforms probe both ports,
which is problematic (for example, ttymxc4 is the console in the 6UL based
platforms).
Use more concrete rules to avoid that problem.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
After the kernel update (v3.14 to v4.1) the sysfs path changed from:
/devices/soc0/soc.0/2100000.aips-bus/21f4000.serial/tty/ttymxc4
to:
/devices/soc0/soc/2100000.aips-bus/21f4000.serial/tty/ttymxc4
which caused the XBee Cellular not to be detected on the new kernel. These more
general rules are compatible with both kernels.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This patch modifies the code of some of the provided samples to be able to run
them in our platforms. By default, these applications cannot find the
certificates in the device, and the command line options are not working.
Patched samples:
* shadow_sample
* shadow_sample_console_echo
* subscribe_publish_sample
See https://github.com/aws/aws-iot-device-sdk-embedded-C.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Variable 'AWS_IOT_LOGGING_LEVEL' can be used from the project 'local.conf' to
establish the logging level of the AWS IoT Device SDK.
There are 6 incremental levels: none, error, warn, info, debug, and trace.
Default is 'debug'.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The AWS IoT device SDK for embedded C is a collection of C source files that
can be used in embedded applications to securely connect to the AWS IoT
platform.
The SDK code is available in GitHub and includes the library code and several
sample applications.
A user must provide from its 'local.conf':
* AWS_IOT_CERTS_DIR: Absolute path to the directories where the required
certifies are stored:
* Root CA.
* Device signed certificate.
* Device private key.
And optionally, values for the rest of variables defined in the 'awsiotsdk-c'
bbclass.
This recipe is building the library code and the binaries for the samples:
* shadow_sample
* shadow_sample_console_echo
* subscribe_publish_sample
See https://github.com/aws/aws-iot-device-sdk-embedded-C.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
mbedTLS is an open source, portable, easy to use, readable and flexible SSL
library.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
QMI modems didn't work with the version of
modemmanager that the dey-2.2-r1 release was
using.
We were using two patches for uBlox plugin to use XBee Cellular 3G
that are now merged in modemmanager master.
This updates modemmanager to use the commit where QMI
problem was fixed and also include uBlox patches.
https://jira.digi.com/browse/DEL-4192
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Add patch to MM, so it detects the U-Blox modem connected to the XBee
socket.
https://jira.digi.com/browse/DEL-4084
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee Cellular needs more time to settle down before MM is able to
detect it on boot. As this is connected to one of the 'ttymxc' serial
ports, use that port to conditionally delay the launch of MM.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding more retries to the port AT probing has an impact in modems not
using serial drivers (for example using qmi, mbim). It takes longer for
MM to detect those modems and then user space gives up waiting for the
modems to be available.
This reverts commit 682d77e414.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Pulseaudio 9.0 relies on the syscall memfd_create, which was introduced
in kernel 3.17, but the version currently supported for the CC6 SBC is
3.14.
There is a corner case where the configure script does not detect the
actual kernel version, thus enabling memfd_create. When Pulseadio tries
to call memfd_create, it shows error messages, so disable memfd
explicitly.
https://jira.digi.com/browse/DEL-3923
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
Added a post-installation script to disable the wireless interfaces on
module variants without wireless support.
This fixes following messages on boot:
wlan: driver load failure
modprobe: can't load module wlan (extra/wlan.ko): No such device
...
https://jira.digi.com/browse/DEL-3781
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following changes have been made to the bluetooth-init script:
* Remove "hciconfig hci0 up/down" and this is now deprecated and likely
to fail. We use the AutoEnable feature of bluetoothd for this now.
* Move setting the MAC address to hciattach instead of using hcitool.
* Remove resets performed by hcitool and hciconfig. The hciattach
application already performs a reset and that should suffice.
* Remove hciattach retries.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commits adds patches to hciattach for the following:
* Strict flow control setting
The hciattach application has a flow | noflow command line argument that is
currently only applied on the first configuration of the uart port. The
hciattach_rome plugin ignores this setting and assumes hardware flow
control is always supported. This commits makes hciattach obey the user flow
control indication.
* Modify hciattach_rome to set MAC address. The MAC address setting
feature in the rome plugin now works with the command line specified
MAC.
* Reduce verbosity. hciattach now accepts a "-v" verbose flag. By
default verbose output it omitted.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This 'sed' command was used in the past, when DHCP or MANUAL was
configured in the '/etc/network/interfaces' (for cellular). This is no
longer true as we always configure the interface with a custom (manual)
script.
This was breaking the rest of interfaces when configured to use 'dhcp':
iface eth0 inet manual
umanualc_opts -S -b >/dev/null &
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Launching the MM on target's boot fails to detect the XBee cellular
because this needs more time to complete the initialization. So add some
more retries for the AT port probing to allow the XBee cellular to be
detected.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of redirecting the MM logging to '/dev/null' use a file, so we
can see what's going on in case of failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The flow control patches have been merged to the master branch, so
update the revision to remove those patches from our layer.
This reverts commit a7c51af5b8.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Sysinfo was showing error messages if the working directory contains any file
with .log extension.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The recovery init checks if the configured update package exists and it is valid
before setting a new key and/or formatting the rootfs partition.
This change avoids getting non-booting devices after performing a firmware
update with a non-existing or invalid update package.
https://jira.digi.com/browse/DEL-3959
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
We have introduced new default configuration files for wireless that do
not show on sysinfo, so add them if they exist.
https://jira.digi.com/browse/DEL-3974
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
The XBee cellular support is at the moment only in modemmanager's git
repository (master branch).
Also remove one Telit patch from the bbappend because it's already
included in the git repo.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version of libqmi is needed for newer versions of ModemManager.
Remove bbappend and patch to previous version as the patch is now
included in the new version.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The current script cannot launch the hostapd twice (for dual HostAP mode)
because start-stop-daemon finds an already existing PID for hostapd after
running the first instance.
The solution is:
- Do not launch the hostapd in background (so that it does not fork the
process, which assigns a different PID)
- Use -b option of start-stop-daemon so that it launches the daemon in
the background.
- Let start-stop-daemon create the PID (since the hostapd will not fork
now this PID will match the hostapd process, allowing to kill it later)
This solution also hides the hostapd log messages that appeared before.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4045
The original init script hardcodes the configuration file to use so it
cannot be re-utilized for concurrent AP/AP mode where two interfaces can
be used as SoftAP.
This commit uses the variable ${IFACE} to:
- select a specific configuration file per interface:
/etc/hostapd_${IFACE}.conf
- create a specific PID file per interface:
/var/run/hostapd.${IFACE}.pid
With this, the /etc/network/interfaces can use the script for using SoftAP
in different wireless interfaces.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the migration to Morty, some of the paths to the artifacts (boot
and rootfs images) need to be updated.
While on it, also remove the temporary README.txt file which is not
needed after it has been packed in the zip installer.
https://jira.digi.com/browse/DEL-4013
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- The Bluetooth daemon was always executed before setting up the
hardware, generating several problems specifically in the CCIMX6SBC.
This was causing the Bluetooth driver to override the Bluetooth name
and alias, as well as avoiding any host function on Bluetooth profiles.
Only pairing and ping was working, as well as client profile sides.
- This change also fixes some issues in the CCIMX6UL platforms with the
Bluetooth daemon failing to perform several bluetoothctl operations.
https://jira.digi.com/browse/DEL-4000https://jira.digi.com/browse/DEL-4015
Signed-off-by: David Escalona <david.escalona@digi.com>
- Some Python modules are no longer available in DEY-2.2 since
the official supported Python version is now 3. This caused the
HDP application to fail importing some of the old modules. For this
reason the sample application has been updated to use Python3
syntax and modules.
https://jira.digi.com/browse/DEL-3996
Signed-off-by: David Escalona <david.escalona@digi.com>
Print the HW and FW versions for the I/O Expander in the CC6UL SBC platform.
https://jira.digi.com/browse/DEL-3958
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
If the volume is not found, the partition cannot be wiped since it is attached.
Remove 'update' UBI device in:
* mdev automount script if volume is not found
* recovery init script before formatting 'update' partition
https://jira.digi.com/browse/DEL-3962
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
ICU support was not included in the rootfs in previous DEY versions
but it's included now through runtime dependences of 'harfbuzz' and
'libical'.
The support is not strictly needed, as ICU is a library for Unicode
support for applications:
http://site.icu-project.org/home
This commit disables ICU support directly for 'harfbuzz' and adds a
patch for 'libical' that allows to disable it. Notice that it's only
disabled for the CC6UL, as the CC6 has no rootfs space problems.
Only the 'libicudata' library is 25MB:
25M /usr/lib/libicudata.so.57.1
https://jira.digi.com/browse/DEL-3854
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The unlock retries feature from the Telit plugin does not work properly with
old versions of the Telit HE910 firmware. This has been fixed in upstream
commit: fbb607f0c25be3a4bb8692ee48445cf437345b6c
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
https://jira.digi.com/browse/DEL-3863
This reverts commit 3123085e72.
we revert this commit because the patch was already applied on mm-1.6.4
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
This commit adds mdev support into the recovery ramdisk to
mount/unmount storage devices for the firmware up tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3692
udhcpc's '-n' option means 'Exit if lease is not obtained'.
We want to keep udhcp client alive if lease is not obtained, so when it is
possible, an IP is assigned.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
udhcpc options added to 'network/interfaces':
* '-S' to log to syslog too.
* Redirect the output to '/dev/null' not to show messages of the tool running
in background (for example when executing 'ifup').
* '&' to send the udhcp client to background.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewing the patches while updating the QCA firmware to a new release,
I encountered this patch. On the original PR it says:
"Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this save us from some syncronism problems if we are not
using HW flow control."
Current spins of the module already use hw flow control. Also, not allowing
hciattach to override the baudrate does not seem right to me. It would be
enough with passing a 3M baudrate to hciattach to match the firmware
default.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit fixes an issue with ModemManager to return the correct
error code when an invalid QMI command is send to the modem.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3748
This commit fixes an issue with the Quectel EC21/EC25 due to a wrong
reported DMS version which will cause ModemManager not to read the
SIM card.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3748
Implement:
* support to start, stop and restart interface
* states machine and retries system to recover from command failures
* overall simplification and code clean-up
https://jira.digi.com/browse/DEL-3858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- Trying to set the complete SWU packages signature key in the
TrustFence class was causing a build error when keys were not
yet generated. To avoid this, set only the key wildcard in the
TrustFence class and expand the variable in the SWU packages
recipes, when keys already exist.
https://jira.digi.com/browse/DEL-3913
Signed-off-by: David Escalona <david.escalona@digi.com>
- Instead of trying to generate the TrustFence keys in this recipe
when they are not present, depend on the 'virtual/kernel' to
ensure they are already generated. This solves a concurrency problem
when two recipes try to generate TrustFence keys at the same time.
https://jira.digi.com/browse/DEL-3913
Signed-off-by: David Escalona <david.escalona@digi.com>
Allowing to boot a non-encrypted rootfs when encryption is enable is a security
hole: if an attacker can somehow write (offline) to the media, he could flash a
custom unencrypted rootfs and break into the system.
If the system is configured to use encryption, only encrypted rootfs will boot.
Trying to boot a non-encrypted rootfs will fail and power off the device.
https://jira.digi.com/browse/DEL-3829
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The recovery ramdisk already contains functionality for encrypted rootfs
installation. The goal is to centralize all this functionality in the recovery
ramdisk.
https://jira.digi.com/browse/DEL-3829
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
For CC6UL, when setting a new key, an "enc" flag must be added to the rootfs in
the "mtdparts" U-Boot variable.
After that a reboot is needed, so the recovery command must be modified to
remove the encryption key and proceed with the rest of commands in the next
boot.
When updating the firmware, a format of the rootfs partition is always
performed, independently if a new encryption key has just been configured.
In case only the encryption key is being configured, we also need to reboot to
format the rootfs properly.
https://jira.digi.com/browse/DEL-3685
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
For CC6UL, when not using rootfs encryption, the "enc" flag must be removed from
the "mtdparts" U-Boot variable.
https://jira.digi.com/browse/DEL-3685
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Software update recipes ('core-image-base-swu' and 'dey-image-qt-swu') are able
to set default or customized values for:
* In the CC6, the proper path for:
* linux partition (default to '/dev/mmcblk0p1')
* rootfs partition (default to '/dev/mmcblk0p3' if no encrypted, always
'/dev/mapper/cryptroot' otherwise)
* In the CC6UL, the proper volume name for
* linux partition (default to 'linux')
* rootfs partition (default to 'rootfs')
https://jira.digi.com/browse/DEL-3666https://jira.digi.com/browse/DEL-3686
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit verifies that the wlan1 interface is not already created
and will skip creating the virtual interface if it already exist.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3917
With the upgrade to Morty, there is a new bootscript that is provided
by Poky. This bootscript is just launching the generic bluetooth daemon,
but it's not doing any hardware initialization.
The fix is to split the hardware initialization to a different
bootscript 'bluetooth-init' and launch it also on boot.
https://jira.digi.com/browse/DEL-3855
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If you try to use libmbim (the API is used at least by mbim-network,
mbimcli and ModemManager applications) you get the following error:
ModemManager: Error converting string: Conversion from character
set 'utf-8' to 'utf-16le' is not supported
In order to solve this we need to integrate glibc gconv UTF16le library
in the build (and its dependencies).
Signed-off-by: Mike Engel Mike.Engel@digi.comhttps://jira.digi.com/browse/DEL-3830
This commit changes the concurrent mode script to enable always the
AP interface through the wireless device but will warn the use
if the virtual MAC addresses used are the default once.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3900
The flash_eraseall busybox utility is not used in the ccimx6 and ccimx6ul
platforms. Its corresponding patch (and the library it depends on) can be
removed from the busybox recipe.
https://jira.digi.com/browse/DEL-1320
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
- Enabled signing support while generating the swupdate
packages for 'core-image-base' and 'dey-image-qt'. The
signing support is only enabled when 'TUSTFENCE_SIGN=1'
and requires the recipe to set the private key that will
be used to generate the signature.
- Enabled hash support while generating the swupdate
packages for 'core-image-base' and 'dey-image-qt'. The
hash support requires the sw-description files to include
a new line for each image and/or file that will be added
to the update package. The hash is automatically calculated
and replaced in the sw-description files.
https://jira.digi.com/browse/DEL-3774
Signed-off-by: David Escalona <david.escalona@digi.com>
- While trying to update the system using signed swupdate packages, the
swupdate binary requires a new parameter (-k) to specify the location
of the public key that will be used to verify the update package. At
the moment there is no way to check if a package is signed or not, so
we asume that the existence of the public key in the recovery initramfs
is enough to determine that we want to update the system using signed
packages.
https://jira.digi.com/browse/DEL-3775
Signed-off-by: David Escalona <david.escalona@digi.com>
- The swupdate binary included in the recovery partition when the
images to build are trustfence enabled performs a verification
of the swupdate package. For this verification to suceed, it is
mandatory to provide to the swupdate binary the public key that
will be used to verify the swupdate package. This public key must be
included in the recovery initramfs only when 'TRUSTFENCE_SIGN=1'.
https://jira.digi.com/browse/DEL-3772
Signed-off-by: David Escalona <david.escalona@digi.com>
- The 'sign/verify' feature of swupdate can only be enabled/disabled at
compile time, it cannot be configured at run time.
- The 'sign/verify' defconfig file is only used when the images to
build are configured with 'TRUSTFENCE_SIGN=1'
- This change implies that all swupdate packages generated will have a
hash for the images to install and will be verified. Sign support is
only enabled for trustfence images.
https://jira.digi.com/browse/DEL-3773
Signed-off-by: David Escalona <david.escalona@digi.com>
- In Jethro, swupdate recipe was using 'swupdate_git.bb' as the main recipe to
build. In morty that recipe has been disabled and the '2017.01' one is used
instead, so we have to append to this new recipe by renaming our existing one.
- Our bbappend will now point to the same SHA1 that is being used, so we can
remove the SRCREV.
- The new code already includes the progress client patch, so it has been removed.
Signed-off-by: David Escalona <david.escalona@digi.com>
There is now a WLAN user guide with configuration examples so there is
no need to pollute the default file with comments.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe is expected to create just an initramfs image, so force the
image FSTYPE with a python anonymous function, so there is no way to
change/append/override it from any other configuration file.
This prevents build failures due to circular dependences if for example
you add:
IMAGE_FSTYPES_append = " recovery.vfat"
to your project's local.conf.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As of DEY-2.0 "mx6" was an override value for CC6, but not for the
CC6UL, so we used it to restrict the packages to be installed only in
the CC6.
Now in DEY-2.2 "mx6" is also a correct override value for the 6UL
family, so correct the override to prevent those gstreamer packages to
be installed in 6UL machines.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As of Yocto 2.2, the shipped QT5 version is 5.7.1 which does not include
'qtbase-fonts' anymore, so remove that package and enable 'fontconfig'
package configuration so the system fontconfig support is used.
Also remove PACKAGECONFIG_GL overrides for CC6UL as they have been added
to upstream 'meta-freescale'.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also, fix gstreamer rtsp package name in dey-gstreamer package group.
https://jira.digi.com/browse/DEL-3459
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also apply patches from meta-fsl-bsp-release (krogoth_4.1.15-2.0.1)
https://jira.digi.com/browse/DEL-3459
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also apply patches from meta-fsl-bsp-release (krogoth_4.1.15-2.0.1)
https://jira.digi.com/browse/DEL-3459
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also apply patches from meta-fsl-bsp-release (krogoth_4.1.15-2.0.1)
https://jira.digi.com/browse/DEL-3459
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also apply patches from meta-fsl-bsp-release (krogoth_4.1.15-2.0.1)
https://jira.digi.com/browse/DEL-3459
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Let Yocto use their own compilation flags instead of hard-coding the
compile command. This fixes:
ERROR: card-detect-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The LICENSE is added through the packagegroup bbclass and the checksums
were outdated making the build fail with:
The LIC_FILES_CHKSUM does not match for poky/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The wireless regulatory database has been moved to its own recipe, so
the update cannot be done bbappending this recipe.
This reverts commit 8e69db8ac5.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-fsl-arm is no longer used for Morty release. Now the community
support is implemented in 'meta-freescale' layer.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add critical section in suspend script to avoid that more than
one instance can be executed concurrently. This happens, for
instance, when the power button key is pressed while the system
is resuming, causing issues on the wifi interface.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3694
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This parameter allows to set the time interval for scheduled scans in
seconds. This is usually managed by the wpa-supplicant dynamically, but
for example with DFS channels and non broadcasting SSIDs re-associations
take too long if the periodic scans time interval is not reduced.
https://jira.digi.com/browse/CC6UL-594
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Ship libgles3-mesa-dev package along with libgles2-mesa-dev because
otherwise GLES3 headers are missing from the toolchain and we have build
failures for example compiling QT applications.
Exactly the same workaround is done for the vivante implementation in
meta-fsl-arm layer.
Original patch (not merged into oe-core):
https://patchwork.openembedded.org/patch/134244/
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-3088
According to NXP i.MX Linux Reference Manual:
The full CAAM function is exclusive with the Mega/Fast mix off feature
in DSM. If CAAM is enabled, the Mega/Fast mix off feature needs to be
disabled, and the user should
"echo enabled > /sys/bus/platform/devices/2100000.aips-bus/2100000.caam/2101000.jr0/power/wakeup"
after the kernel boots up, and then Mega/Fast mix will keep the power
on in DSM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3636
It's not enabled by default. It's controlled by DEY_IMAGE_INSTALLER
variable in the project's local.conf.
https://jira.digi.com/browse/DEL-3591
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add critical section in suspend script to avoid that more than
one instance can be executed concurrently. This happens, for
instance, when the power button key is pressed while the system
is resumming, causing issues on the wifi interface.
https://jira.digi.com/browse/DEL-3431
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
The profiles created for the sgtl5000 sound card didn't have any priorities
assigned, making pulseaudio map a different profile than before and causing the
sink to remain unloaded.
This commit fixes this by assigning a priority to each profile. The values
were taken directly from the default profile to assure that pulseaudio's
behavior is the same using one profile or the other.
https://jira.digi.com/browse/DEL-3602
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We have seen corner cases (e.g. when the partition to format has already
some corrupted UBI metadata) where ubiformat stops and ask the user for
confirmation to do the format. We cannot have such interactivity in the
recovery ramdisk so use the '-y' argument to assume yes for all
questions.
Also use the '-q' (quiet) parameter instead of the '/dev/null'
redirections to remove command's output.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For the moment the cloudconnector is provided only as static library, so
the recipe can be simplified.
https://jira.digi.com/browse/DEL-3523
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In pulseaudio, module-suspend-on-idle controls how much time a sink spends
in the 'idle' state before going to 'suspended'. This means the ALSA device
associated with the sink stays busy for a few seconds after loading or using
the sink.
This commit adds the timeout=0 parameter when loading module-suspend-on-idle.
Now the sink will go to the 'suspended' state right after being loaded or used.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
On boot, pulseaudio looks for the sound cards' corresponding profile sets, and
uses a default configuration if none is found. This was causing pulseaudio to
take up to 5 seconds trying every possible default profile.
This commit fixes this by creating a specific profile set for each of the sound
cards on the ccimx6sbc so pulseaudio doesn't spend time trying different
profiles that don't apply to our platform. It also adds udev rules so
pulseaudio knows which configuration to load for each card.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The HDMI hotplug script required alsa-utils to be installed in order to work.
This commit avoids this by adding a recipe for a small binary that replaces
aplay in the script.
https://jira.digi.com/browse/DEL-3482
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of using a hardcoded path to the SWU update package, just get
the filename and search the file in the different mounted partitions
(giving priority to the internal 'update' partition over other external
media).
https://jira.digi.com/browse/DEL-3466
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For block devices we can get the filesystem in the partition using the
'blkid' command.
This cleans up some warnings on mounting:
EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
"i" variable in the nested loop is expanded to the absolute path
of the device, so prepending it with the ${device} results in
"/dev/sda/dev/sda1" for a 'sda1' partition.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These examples can be used to test Device Cloud functionality. There are three
test applications available:
* device_request_listener: Listen for requests from the Device Cloud
* upload_data_points: Upload test data points to the Device Cloud
* upload_file: Uploads the contents of a file as binary data points
https://jira.digi.com/browse/DEL-3305https://jira.digi.com/browse/DEL-3309https://jira.digi.com/browse/DEL-3397
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This avoids the certificate package being generated according to Debian
rules (libcloudconnector-cert).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The CC6UL has little video capabilities and reduced storage memory so lets
remove gstreamer plugins included in -bad and -ugly to reduce the rootfs
size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-713
recovery-utils allows to configure recovery commands and reboot into
recovery mode.
Internal recovery-utils.git SHA1: 5555d4c736e3
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When hotplugging the HDMI cable after booting the target, pulseaudio doesn't
load the HDMI sink. This commit fixes this by adding a udev rule and a script
that prompts pulseaudio to detect the HDMI sound card and load its sink, as
well as making it the default one.
If alsa-utils is available, a faulty command is run to load the card without
any audio output. Otherwise, module-udev-detect is unloaded and reloaded.
This is based on commit fca507d316.
https://jira.digi.com/browse/DEL-2327
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a clone from the original psplash recipe init script
but with the added fix:
@@ -25,5 +25,7 @@
read rotation < /etc/rotation
fi
-/usr/bin/psplash --angle $rotation &
+if [ -c "${FBDEV:-/dev/fb0}" ]; then
+ /usr/bin/psplash --angle $rotation &
+fi
which avoids running the application when there is no framebuffer
in the system. This prevents the following error message during
boot:
Error opening /dev/fb0: No such file or directory
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2747
Some platforms, like ccimx6ulsbc, don't support jack detection
out of the box.
PulseAudio will mute the Headphones by default if it believes
there is no headphones jack plugged-in. With this patch we
tell it to preserve ALSA default value for the headphones
controls.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3435
These recipes allow to generate the .swu update packages to be used with
SWUpdate. The packages can be generated using:
bitbake dey-image-qt-swu
bitbake core-image-base-swu
https://jira.digi.com/browse/DEL-3272
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
- Include psplash package in the recovery initramfs recipe.
- Start psplash in the recovery init.
- Add new methods to communicate with psplash from the init script.
- Show psplash progress information from the init script.
- Start progress binary to update psplash during a firmware update.
https://jira.digi.com/browse/DEL-3356
Signed-off-by: David Escalona <david.escalona@digi.com>
- This patch comes from the sw-update upstream and adds command line support
to the progress client binary.
a11e6f2b80https://jira.digi.com/browse/DEL-3356
Signed-off-by: David Escalona <david.escalona@digi.com>
- Added a 5 seconds delay before mounting external disks so they have
time to be recognized in the system.
- Check if UBI volume is mounted before formatting it.
- Check if eMMC block device exists before formatting it.
Signed-off-by: David Escalona <david.escalona@digi.com>
- Added the new image type 'recovery.vfat' to the DEY images
generation process. This new image is a clone of the 'boot.vfat'
but including the recovery ramdisk and the recovery boot script.
- Added the new image type 'recovery.ubifs' to the DEY images
generation process. This new image is similar to the 'boot.ubifs'
but including the recovery ramdisk and the recovery boot script.
Signed-off-by: David Escalona <david.escalona@digi.com>
- This recipe generates the recovery ramdisk image with the contents of the
recovery ramdisk tree (recovery-initramfs) and other packages.
Signed-off-by: David Escalona <david.escalona@digi.com>
Bringing the Bluetooth interface down and up during suspend
is not needed and it even showed problems on the Starter Board
where the Bluetooth interface does not come up again after
having been brought down in suspend.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3416https://jira.digi.com/browse/DEL-3081
Separately add 'dey-gstreamer' to ccimx6ulsbc platform.
This platform does not have 'accel-video' but we want gstreamer
for using it with video/camera.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2358
There is new functionality in that version that we need for our firmware
update solution, so append the git-based recipe and set the revision to
the 2016.10 version.
Also provide a customized build configuration file. Notice that the
defconfig file is actually a full '.config'. It needs to be a full
config file because otherwise the anonymous python function in the
recipe is not able to gather all the build time dependences.
https://jira.digi.com/browse/DEL-3355
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove preventive delays during the removal of Bluetooth and Wireless
interfaces. Tests revealed they are not needed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The loading of the wireless module without proper arguments does nothing.
Besides, if the interface was down before going to suspend, there is no
need for the wireless module to be loaded.
The wireless module will be loaded nevertheless (with proper arguments)
when the interface is brought up.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3241
The suspend script was unloading the wireless module driver *only* if the
interface 'wlan0' was previously up. If the interface is down the module
does not unload and the system fails to suspend.
This patch removes the module always if it appears in the list of loaded
modules.
While on it, move the unloading of wireless after the unloading of
Bluetooth, to be in line with the reversed order in which they are loaded
on the resume_interfaces() call.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3241
Use the static binary from the tarball, which should be common across
different platforms and operating systems.
https://jira.digi.com/browse/DEL-3261
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The u-boot header is required for U-Boot to boot the image in secure boot.
The cpio.gz.u-boot.tf image gets signed and encrpyted if required.
https://jira.digi.com/browse/DEL-3242
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
https://jira.digi.com/browse/DEL-3195
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The OTP word read was incorrect. HW_OCOTP_CFG5 corresponds to bank 0 word 6.
https://jira.digi.com/browse/ADK4A-1129
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Print the wireless configuration as well as supplicant and hostapd version info
https://jira.digi.com/browse/DEL-3147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows to correctly read the U-Boot version when using encrypted images.
Leave the current implementation as a fallback, in case the system is using an
old U-Boot which does not populate the device tree property.
https://jira.digi.com/browse/DEL-3025
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
When encryption is enabled, the signed U-Boot image will be used for the uSD.
This allows the uSD image to boot the device and recover it from the U-Boot
console, which is its main purpose. Nevertheless, the uSD image will not be
able to boot Linux.
https://jira.digi.com/browse/DEL-2877
This reverts commit 2e13e194d9.
Optimize the provided config file with default support for 802.11ac.
https://jira.digi.com/browse/DEL-3128
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Also change the image type of dey-image-trustfence-initramfs.
https://jira.digi.com/browse/DUB-615
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
x11vnc is light in size so we can include it in the final rootfs after
reworking the qtbase and packaga-management stuff.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Including ICU increases the rootfs too much and is not needed unless we want
to build qtwebkit, so only include it for platforms with enough size.
Additionally, linuxfb support is not needed for ccimx6.
https://jira.digi.com/browse/DEL-3058
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The ccimx6ul has a small NAND flash rootfs partition, and removing
package-management image feature saves around 10MB.
https://jira.digi.com/browse/DEL-3058
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this work arounds some synchronization problems when not
using HW flow control.
https://jira.digi.com/browse/DEL-3052https://jira.digi.com/browse/DEL-3057
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
CCIMX6UL's rootfs partition is not big enough for the default
'dey-image-qt' image. This commit reworks the QT5 and SATO installed
packages for the ccimx6ul, so the image fits in the rootfs partition.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul does not have a GPU, so opengl based gstreamer sink will
not work. Thus apply the patch only for the CCIMX6.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This plugin uses directly the framebuffer, so it can be used in non
X11-based systems, but it oly supports software rendered content,
no opengl/es.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to build 'qtbase' for the CC6UL.
It only fixes the broken build, as any QT application that uses OpenGL/ES
will fail because there is no support for QT/OpenGL in modules without
a GPU.
Fix:
arm-dey-linux-gnueabi-g++ -march=armv7-a -mfloat-abi=softfp -mfpu=neon
--sysroot=/ssd/dey/jethro/fb/ccimx6ulsbc/tmp/sysroots/ccimx6ulsbc
-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -o opengldesktop
opengldesktop.o -lGL
.../arm-dey-linux-gnueabi/5.2.0/ld: cannot find -lGL
A similar commit was done in meta-fsl-arm.git (branch Krogoth).
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add an empty calibration file to prevent the 'xinput_calibrator' tool
being launched on X11 desktop start.
The file does not have any calibration data because capacitive touch
displays usually do not need calibration.
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This file has not been synchronized with the one in Poky since previous
versions of DEY. Not much has changed, but sync it anyway.
Also:
* Get SHOWCURSOR from formfactor config files, but fallback to one
value depending on HAVE_TOUCHSCREEN if it was not configured.
* Rename the bbappend to the version generic '_%.bbappend'
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Copy of the original defconfig in hostapd-2.4 and enabling next options:
- CONFIG_LIBNL32
- CONFIG_EAP_PSK
- CONFIG_EAP_PWD
- CONFIG_WPS
- CONFIG_WPS_NFC
- CONFIG_RADIUS_SERVER
- CONFIG_IEEE80211N
- CONFIG_IEEE80211AC
- CONFIG_DEBUG_FILE
This means that the hostapd binary will have support for that features, but it
does not imply that the wireless chip does support it.
https://jira.digi.com/browse/DEL-2936
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Add commented lines as example to configure and run the wlan0 interface in AP
mode using hostapd daemon.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not autostart hostapd daemon on boot because because it will conflict with
wpa-supplicant process and add a custom hostapd.conf file with WPA2-AES
encryption.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Currently we don't support booting encrypted images from an SDCARD, so
just disable the generation of such images.
https://jira.digi.com/browse/DEL-2876
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
According to 'grep' manual '\s' is a synonym for [[:space:]] which
matches spaces, TABs, but also newlines, etc. We want to only match
spaces and TABs, so use [[:blank:]] instead.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* set cellular user and password
* stricter replace to not match set values
* only set cellular interface to auto
Internal merge of Github's PR:
https://github.com/digi-embedded/meta-digi/pull/2
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, on closed devices you cannot revoke any key. To do so, it is
required to compile a U-Boot which instructs the HAB not to set the sticky
bit which write protects that field in the OCOTP controller.
This patch introduces a Yocto macro which allows to configure U-Boot in
that way.
In the ConnectCore 6, the value of this settings is ignored, because HAB never
sets the sticky bit which write protects that field.
https://jira.digi.com/browse/DUB-665
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
While performing usability testing on the TrustFence documentation, it has
been noted that in order to follow the secure boot instructions the
console needs to be enabled.
We have now moved the secure console section to the end of the
documentation so that disabling the console is the last configuration to
make in a secure system.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Down the bluetooth interface before entering suspend and up it after resuming
if it is present and up.
https://jira.digi.com/browse/DEL-2806
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Start syslog earlier (from 20 to 02) so it is running and other init scripts
can use it to log into the system like the S03networking script.
https://jira.digi.com/browse/DEL-2812
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This is needed so the encrypted rootfs is properly resized to the
partition size.
https://jira.digi.com/browse/DEL-2765
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
New functionality has been implemented in trustfence-tool application,
so there is no need to call cryptsetup command.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Get filesystem type of rootfs block device and pass it explicitly to the
mount command to clean following warnings on boot:
EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need a different configuration file, because the SoftAP functionality is
supported using the hostapd package instead of the wpa_supplicant.
https://jira.digi.com/browse/DEL-2744
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Extend the report with more details about:
- memory usage
- all network ports (-a) with their related PIDs (-p)
- network link details (to determine if interface is up)
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Using module-detect there are some audio reverb problems. Reverting that commit
will make pulseaudio use module-udev-detect again instead, which takes longer
to initialize but does not have that problem.
This reverts commit e021f738ee.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
When module-alsa-sink is used, the audio is sometimes heard with
reverb. We will go back to module-udev-detect, so the functionality
introduced in the commit being reverted won't longer work.
This reverts commit fca507d316.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Add a couple of bluez patches: one for increasing the number of connection
showed with "hcitool con" command and remove "refresh" option in hcitool
help that is not supported.
The qca6564 chip can support more than 10 simultaneous BLE connections.
https://jira.digi.com/browse/DEL-2735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
qtwebengine does not support armv5 platforms (for example ccardimx28js),
so we need to restrict that package to the ccimx6sbc
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When Trustfence is enabled, this adds a dependence on the TF initramfs,
so it's built and added to the boot image.
It also modifies the u-boot boot script on the fly, to boot correctly
using the Trustfence initramfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe builds the initramfs image that is used to boot from an
encrypted rootfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package adds some files needed by the trustfence initramfs and that
are not included in other packages.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
lvm2 package provides some user-space tools, but also some dynamic
libraries: libdevmapper, libdevmapper-event, etc.
This commit allows to package the LVM2 libraries in a different package
than the LVM2 user-space tools. This way other user-space tools (e.g.
cryptsetup) that runtime depends on the LVM2 libs can only add that libs
package to the rootfs, instead of the whole LVM2 utilities.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul or ccardimx28 do not have hdmi interface, so do not install the
hdmi hotplug script.
https://jira.digi.com/browse/DEL-2654
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The TRUSTFENCE_UBOOT_DEK_SIZE Yocto macro maps to the UBOOT_DEK_SIZE U-Boot
Kconfig entry, which is defined as a choice entry. This makes necessary
to explicitly define the choice Kconfig entry for the configuration to
work.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicitly disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The following utilities are supposed to be available on the environment's
PATH:
uptime, uname, cat, zcat, free, ps, mount, netstat, route, ifconfig, gzip
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit changes the CONFIG_CCIMX6SBC_CONSOLE_ENABLE_GPIO_NR define
into a platform independent setting.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2641
The power regulator connected to the qca6554 chip is always on, which causes
the Bluetooth part to not work correctly after a software-reset.
This commit asserts momentarily the BT_EN line during the start-up sequence
to reset the Bluetooth controller so that it is in a predictable state after a
reset.
https://jira.digi.com/browse/DEL-2623
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-2603
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
The steps to set the bluetooth MAC address is send an specific hci command
and an hci reset, so the bluetooth interface need to be up in order to
configure it.
Additionally we have generalized the way to read the MAC address from the
device tree and removed some old code for getting the MAC address in
kernel version 2.
https://jira.digi.com/browse/DUB-595
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add a software workaround to disable the HW flow control because the SOM
revision 3 (and older) has swapped the bluetooth TX and RX lines so we need
to operate in DTE mode which implies that the HW control lines are swapped.
This also implies reducing the baudrate to avoid the need for HW flow control.
https://jira.digi.com/browse/DEL-2611
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Implement the set of TRUSTFENCE_ macros to configure each secure boot feature
available in U-Boot.
https://jira.digi.com/browse/DUB-570
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
sysinfo is a bash script which gathers all the relevant information
from a running system on a timestamped compressed file.
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Victor Rubio Victor.RubioTorroba@digi.com
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a trustfence class to encapsulate all trustfence
configurations.
https://jira.digi.com/browse/DEL-2257
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This support comes from meta-linaro @9f899282caa9 and adds the ability
to configure getty dynamically from the console argument in the kernel
command line.
This will make it possible to enable/disable the console dynamically as
signalled by U-Boot.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Port the bluez5 qca6564 support based on 5.19 to the current version 5.33.
The ported version is based on qualcomm tag r110048.3.
https://jira.digi.com/browse/DEL-2581
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This daemon (rngd) feeds random data from hardware device to kernel
entropy pool.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As of Yocto 2.0, the cryptodev module used as interface between
user-space and hardware encryption is the version 1.7.
According to that cryptodev's version documentation, the cryptodev
engine in openssh is outdated:
https://github.com/cryptodev-linux/cryptodev-linux/blob/cryptodev-linux-1.7/README
They provide an URL with two patches to update openssl. This commit
forward port those patches to the Openssl version used in this version
of Yocto.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
COMPATIBLE_MACHINE is a regular expression, so we need to update the current
pattern for ccimx6 due to it will also match with ccimx6ul.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
That restriction does not make any difference in the final image
contents, because no package depending on X11 is added to the image, and
it prevents the image from being built with the default DEY
configuration (that has X11 distro feature enabled).
This also allows to build the image in the buildserver with the same job
that builds other X11 based images.
https://jira.digi.com/browse/DEL-2106
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use LAYERDEPENDS to configure the layer dependences for meta-digi-arm
and meta-digi-dey.
https://jira.digi.com/browse/DEL-1129
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise building the demo application fails with:
| DEBUG: Executing shell function do_configure
| Project ERROR: Unknown module(s) in QT: svg
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This patch adds a udev rule and a script to detect HDMI hotplug and create
the HDMI audio pulseaudio sink if needed (that is, if the system was
booted with no HDMI cable plugged).
https://jira.digi.com/browse/DEL-2327
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
A patch sent upstream has been finally merged so this commit is not
needed anymore.
This reverts commit 6a66656161.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
module-udev-detect blocks the sound interface on boot for about five
seconds while detecting the hardware. This patch removes it so that
module-detect is used instead, which uses static hardware detection and is
faster.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Move this variable to DEY distro conf so that it is available for any
recipe built with the distro.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
There is another OpenGL demo application QT5 Hello Windows for testing
purposes.
https://jira.digi.com/browse/DEL-2184
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has been observed that the wireless interface ocassionally fails to resume
from suspend on extensive long run validation testing, so we workaround it by
bringing the interface down before suspend and bring it up again after resume
This reverts commit a77cd1406d.
https://jira.digi.com/browse/DEL-2217
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This image provides a demo rootfs with QT. It can be built for
framebuffer and also for X11.
https://jira.digi.com/browse/DEL-2196
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We were masking meta-fsl-arm linux recipes to clean some warnings on
bitbake parsing. This does not happen anymore with new versions of
Yocto, so just remove this BBMASK.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This install the 'obexd' server which is needed for the QT5 bluetooth
file transfer example applications.
https://jira.digi.com/browse/DEL-2147
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Generalize bluetooth support so it can be used not only with bluez4 but
with bluez5 as well. Use EXTRA_QMAKEVARS_PRE to pass the packageconfig
options to the do_configure task.
https://jira.digi.com/browse/DEL-2147
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a user-space workaround for the reboot/poweroff problems we
are having in the ccimx6sbc. Seems that they are not reproducible when
only one core is enabled, so the workaround is to disable the rest of
the cores for rebooting/halting.
https://jira.digi.com/browse/DEL-2133https://jira.digi.com/browse/DEL-2148
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit a9e36a74bb20ab38f220116ba2742dca3d80c293)
Also initialize the video sink to 'glimagesink' in case it has not been
configured from the environment, but only for the X11 application
(gtk-play). This recipe also provides a command line application for
framebuffer (gst-play) that is not affected by this change.
https://jira.digi.com/browse/DEL-2132
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The example applications are not packaged by default, so extend the
recipe to create a package with the example applications.
https://jira.digi.com/browse/DEL-1960
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The script toggles the BT power GPIO regardless of the value being
undefined.
Check that the GPIO is defined before trying to toggle it.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The BT power GPIOgpio was determined basing on machine name on device tree.
This corresponds to the name of the board, and might be changed by a user
that designs his own carrier board to use the module on.
Besides, the BT power GPIO is a pin that's routed on the module (both on
the ConnectCore 6 and on the ConnectCard for i.MX28) not on the carrier
board.
This commit determines the BT power GPIO basing on the module string inside
the 'compatible' property. This must exactly match the module name and is
a required property for using Digi module's BSP.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2109
So we can build a 'dey-image-graphical' image for framebuffer with
support for QT5.
https://jira.digi.com/browse/DEL-2017
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No functional change, as 'package-management' is added via the included
dey-image-minimal recipe, and 'pointercal-xinput' is a dependence of
xinput-calibrator which is added for X11 images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default QT5 applications use 'xcb' platform plugin but this can be
changed using the QT_QPA_PLATFORM environment variable. On non-X11
images the 'xcb' platform plugin obviously does not work, so just
configure 'eglfs' for non-X11 images.
https://jira.digi.com/browse/DEL-2017
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are some demo apps that otherwise fail with:
QSqlDatabase: QSQLITE driver not loaded
QSqlDatabase: available drivers:
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This demo app is very generic and does not play well with FSL gstreamer
plugin, so using it just crashes in different ways (doing a camera zoom,
recording a video, etc)
This reverts commit 2776dcd654.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We will use 'qmlvideo' application for QT5 media player demo, so just
create a desktop launcher.
https://jira.digi.com/browse/DEL-2007
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These demo applications are only distributed in binary form. We don't
have the source code as an example for customers, so just remove them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The aim is to reduce even more the memory used by the host at build time
to avoid the OOM killer killing the linker.
Otherwise it can fail in machines with few memory even though the linker
is configured with '--no-keep-memory'.
Notice that we also reduce the parallel jobs expanded by 'ninja' build
system configuring and exporting NINJAFLAGS variable. Otherwise this
build system does not honor PARALLEL_MAKE variable.
Fix:
arm-dey-linux-gnueabi-g++: internal compiler error: Killed (program cc1plus)
ninja: build stopped: subcommand failed.
https://jira.digi.com/browse/DEL-1973
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The autotools class is trying to execute:
intltoolize --copy --force --automake
so there is a intltool-native dependency.
Fix:
run.do_configure: intltoolize: not found
ERROR: Function failed: do_configure
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The meta-qt5 layer provides a 'populate_sdk_qt5' class with all what's
needed to build a SDK based on an image recipe.
Inherit the class here so it's available for all DEY image recipes
depending on 'dey-qt' image feature.
https://jira.digi.com/browse/DEL-1973
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This distro feature adds a lot of dependences when building a
toolchain/SDK (maininly all the *-ptest packages but some more). One of
those dependences fails when building the toolchain:
warning: Removing procps-3.3.10-r0.1@cortexa9hf_vfp_neon due to file /etc/sysctl.conf conflicting with base-files-3.0.14-r89.1@ccimx6sbc
error: procps-dev-3.3.10-r0.1 requires procps = 3.3.10-r0.1
There is no functionality loss because the 'ptest' packages are just a
sort of unit testing script for each package, and we are not testing all
the open source and third party packages.
https://jira.digi.com/browse/DEL-1973
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add BLUEZ5_NOINST_TOOLS to bluetooth packagegroup. Gatttool is
added to BLUEZ5_NOINST_TOOLS in bluez5.inc so it is not necessary
to add gatttooll to do_install_append function.
Signed-off-by: Urko Nalda <Urko.Nalda@digi.com>
Add support for bluez5 profiles under experimental flag.
Health Device Profile is an experimental profile.
https://jira.digi.com/browse/DEL-1936
Signed-off-by: Urko Nalda <Urko.Nalda@digi.com>
Adding these demo apps allows to install the base QT libs as well,
because they are resolved automatically by bitbake.
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is copied verbatim from the 'meta-fsl-bsp-release' layer. FSL
distributes these applications in binary-only form.
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise at run time there is no service available that is able to
manage the multimedia files and there is a failure:
requestService(): no service found for - "org.qt-project.qt.camera"
requestService(): no service found for - "org.qt-project.qt.mediaplayer"
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a build-time option, nothing to do with runtime. Decrease the
memory used by the linker to avoid being killed due to out-of-memory.
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the bluetoothd daemon is launched before the interface is ready
RFCOMM/L2CAP listening socket connections fail (apparently because
the channel is not ready) with BlueZ 5.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2042
We switch to the way it works in Android, short press (<2s) takes the target
to suspend and long press, >2s but <9s, performs a software controlled
power down.
Pressing longer than 9 seconds does the uncontrolled hardware power off
directly from the PMIC.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The suspend script did a ifup/ifdown on wlan0 to workaround issues we
had using wireless drivers on some platforms.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
yocto-2.0 (jethro) does not support bluez4 by default, it has been set
deprecated, but there is some functionality that does not work with bluez5
like bluetooth audio with alsa and some previous scripts like hdp.py are not
API compatible.
In order to compile a project with bluez4, just remove bluez5 from distro
features from your local.conf project.
DISTRO_FEATURES_remove = "bluez5"
https://jira.digi.com/browse/DEL-1943https://jira.digi.com/browse/DEL-995
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not include the btfilter support in the default images. Its support is
not required for bluetooth functionality.
https://jira.digi.com/browse/DEL-1935
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
btfilter (abtfilt) and bluetoothd are two independent services. Break the
relationship between them and split the support in independent init scripts
https://jira.digi.com/browse/DEL-1933
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The script was basing on the variant coded in the HWID to determine
if the variant had bluetooth, by comparing to an array of hard-coded variants.
This required the script to be updated with every new variant that supported
Bluetooth.
The patch checks instead if the node 'bluetooth' exists at all in the device tree
to determine if the variant supports Bluetooth.
https://jira.digi.com/browse/DEL-1933
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We want to unlink the script from abtfilt application, so moved to a different
recipe (that includes hciattach).
https://jira.digi.com/browse/DEL-1933
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The problem is the change of the default C standard from gnu89 to gnu11
which changes the semantics of 'inline'. The issue is described in the
porting guide at https://gcc.gnu.org/gcc-5/porting_to.html.
Fix based on u-boot's commit dfc9c24
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
It has a hard-coded dependence in bluez4 and this has been removed from
openembedded-core.
There is a different Jira for the bluez5 migration.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove QT4 phonon patches and qtmediaplayer demo as they depend on
gstreamer-0.10.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reverts commit f7e2e8bd2c.
FSL has updated this package to version v4.0.7 in meta-fsl-arm.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reverts commit d4fb6a238e.
The patch we were backporting to alsa-utils 1.0.28 is included in
alsa-utils 1.0.29 (which is used in Yocto 2.0).
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The mutex locking was not well resolved and a basic pipeline like:
gst-launch-1.0 playbin uri=file:///run/media/mmcblk0p5/big_buck_bunny_480p_h264.mov
was failing with:
Attempt to unlock mutex that was not locked
https://jira.digi.com/browse/DEL-1850
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The FSL gstreamer-0.10 plugin has renamed the video sink from
'mfw_v4lsink' to 'imxv4l2sink' so the phonon patches need to be updated
accordingly.
https://jira.digi.com/browse/DEL-1850
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an atheros proprietary package that contains the athtestcmd and
wmiconfig applications.
Neither of them are currently used.
https://jira.digi.com/browse/DEL-1878
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Microcom is a minimal version of minicom and is extremely useful
for doing basic testing on target (for instance, talking to a modem
or other serial connected device).
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
(cherry picked from commit 90c6708e948c9b9942b48d425ff21e0affc2f8d7)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In yocto 1.8 if the BUILDNAME is empty, it gets filled with a timestamp
during the build. However the value and format of this timestamp are
different from the ones used in the name of the image.
This change matches the formats and values, setting the value of BUILDNAME
to the timestamp used in the name of the image.
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Which wireless module to use belongs more to the machine config files in
the BSP layer, than to the generic wireless packagegroup.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Duration (-d) option was broken.
cherry pick from 8f361d83cfcb39887f5fc591633e68d9448e3425.
https://jira.digi.com/browse/DEL-1828
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the networking configuration to support the creation of a bridge
interface.
Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com
This was used just for SARES testing and according to the SA team it is
not needed anymore, so just remove it.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
dependences for consistency
The GPIO and ADC examples are not meant for the mx6 familiy, so make their
dependences platform dependent
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
https://jira.digi.com/browse/DEL-1698
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
(cherry picked from commit 42997de56cf3f3943518e782332effad66965b21)
Conflicts:
meta-digi-dey/recipes-digi/dey-examples/dey-examples-bt.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-btconfig.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-can.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-hdp.bb
The external kernel module does not build with linux 3.14, and we want
to test the upstream driver included in the kernel tree.
So for the moment disable the external kernel module, to allow start
building images in the buildserver.
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now each platform is only supported in one kernel version, so there is
no need to have multiple calib files per linux kernel version.
https://jira.digi.com/browse/DEL-1747
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the following lines to add support for the HSP/HFP and A2DP profiles,
and to route the audio through the HCI SCO channel:
Enable=Source,Sink,Headset,Gateway,Control,Socket,Media
SCORouting=HCI
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Those packages are not machine specific, so there is no need to set
PACKAGE_ARCH to ${MACHINE_ARCH}.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This simplifies the code and as an extra allows to override the default
root password from the project's local.conf (setting MD5_ROOT_PASSWD
variable)
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Poky added a new class that provides the same functionality we
implemented in our 'dey-image' class. So just use that class instead
of reimplementing it in our layer.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove 'dey-test' image feature and create a SARES bbclass with the
same functionality. This makes easier the creation of images suitable
for SARES testing just adding:
INHERIT += "sares-image"
to your project's local.conf
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the patch because it's now included in wpa_supplicant v2.3
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now it depends on the last set capture mode which may be not compatible.
https://jira.digi.com/browse/DEL-1521
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Changes in Poky (Dizzy) made our SDK unable to build QT applications.
This commit syncs again with upstream so the toolchain is able to build
QT apps.
https://jira.digi.com/browse/DEL-1544
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add a Digi mirror for packages that have dissapeared upstream.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 0a01d3a5d0203d1ce75482677739bf0113da624d)
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 537803cb64809acbac243179d6d448ad6cd70b85)
Yocto 1.7 Dizzy added support for os-release file in a new recipe, so
we need to remove it from our base-files bbappend in order to avoid
conflicts between both packages.
https://jira.digi.com/browse/DEL-1390
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This can be used as a template for size optimized images. It constraints
the use of X11 related packages and the image types used.
To build, add the following to your conf/local.conf:
DISTRO_FEATURES_remove = "x11"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Also remove config entries in '/etc/network/interfaces' if corresponding
variable is not defined.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Allows to configure static DNS servers in resolv.conf setting following
variables in your project's config file:
ETH0_STATIC_DNS, ETH1_STATIC_DNS, WLAN0_STATIC_DNS
Those variables accept multiple dns servers (separated by spaces)
https://jira.digi.com/browse/DEL-1266
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the package manager postinst framework to run the rootfs resize
script on first boot after the image has been flashed to the EMMC.
https://jira.digi.com/browse/DEL-1317
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
microwindows makefiles override some environment variables set by
bitbake. This makes the build fail with:
fatal error: gnu/stubs-soft.h: No such file or directory
Force those variables by passing them via the make command line.
https://jira.digi.com/browse/DEL-1319
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP to support 'connmand' for dhcp.
* CONFIG_CTTYHACK to make easier boot from an initramdisk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No longer needed because a patch with the same functionality was
accepted upstream (meta-fsl-arm).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was added in the past (dey-1.4) as a workaround for reboot/poweroff
issues not completing properly [DEL-633]. At that time the util-linux
umount command worked while the one from busybox didn't. Now this
workaround is not needed anymore. The reboot/poweroff commands complete
correctly with busybox' umount, so just remove the runtime dependence.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is now needed in yocto 1.7. Otherwise it fails with:
ERROR: Please ensure recipe packagegroup-dey-gstreamer.bb sets PACKAGE_ARCH before inherit packagegroup
ERROR: Please ensure recipe packagegroup-dey-examples.bb sets PACKAGE_ARCH before inherit packagegroup
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This installs 'libbluetooth.a' in the toolchain (needed to build static
binaries that use libbluetooth).
https://jira.digi.com/browse/DEL-1303
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit f53ae4ab2af1bc5dd2f3f38f9d351d9eefd1f163)
Start the application with a well known rotation value that works with
all the resolutions. Otherwise the rotation value is unknown because it
could have been changed in a previous run of the application.
Also in the kernel driver support was added to report EINVAL to
user-space in case the requested rotation is not supported. We use that
to not return from the 'v4l2_rotate' function without enabling again
the overlay preview.
https://jira.digi.com/browse/DEL-1068https://jira.digi.com/browse/DEL-1205
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 2f7547a1b810683b813b708ba67e53ba156a9337)
The camera/driver does not support a cropping rectangle with height and
width less than 8 pixels. Add those limits to the sanity check of the
values in the user-space test application.
https://jira.digi.com/browse/DEL-1201
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to easily build QT applications sourcing the toolchain
environment setup script and then running:
$ qmake -project
$ qmake
$ make
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The adt-installer hardcodes the distro version in URL paths to
yoctoproject website. This is ok if you control the website and the
versioning of the distro (for example using Poky as distro).
In DEY the versioning is not compatible with the content of the website,
so just blacklist the recipe. If anyone needs the adt-installer they can
download it from the Yoctoproject.
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the 'mkimage' host tool to the toolchains generated with 'bitbake
meta-toolchain' or with 'bitbake -c populate_sdk <image>'.
This allows to use the standalone toolchain to build kernel images of
type uImage (with u-boot header)
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We used to have these poky references to make 'adt-installer' happy when
built using DISTRO=dey.
But this has side effects on the standalone toolchain created with
'populate_sdk'. The standalone toolchain installer has:
* default install path referring to poky instead of dey
* default toolchain version not matching our DEY version
This is misleading for customers, so rework the distro config file
prioritizing the standalone toolchain over the adt-installer.
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We used to have two distros:
DEY: without X11 support
DEY-GUI: with X11 support
After the change, we have just one DEY distro with X11 support. At the
same time add a CONFLICT_DISTRO_FEATURE to dey-image-minimal so it
cannot be built with X11 distro feature enabled. So now in order to
build 'dey-image-minimal':
DISTRO_FEATURES_remove = "x11"
needs to be added to your project's local.conf file.
https://jira.digi.com/browse/DEL-858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NETWORK_MANAGER is a packagegroup-core-x11-sato recipe variable, so
override it in a bbappend instead of at a distro level.
At the same time remove a useless WEB variable from the image recipe.
WEB is a packagegroup-core-x11-sato local variable as well, and
overriding it in another recipe does not have any effect, so just
remove it.
https://jira.digi.com/browse/DEL-858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was working in dey-1.4 because there was a basic support for static
nodes in poky. They removed it in Yocto 1.6.
We still need this functionality, so add it here in the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
gobject introspection is not supported in Yocto, so there is not a
python binding package to use it.
Bluez4 uses such functionality in some of the test scripts. This patch
replaces it with the legacy pygobject, so they can work again.
https://jira.digi.com/browse/DEL-1274
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Remove inconditional inclusion of dey-gstreamer: dey-image-minimal
includes dey-gstreamer if MACHINE_FEATURES contains 'accel-video'
so dey-image-graphical inherits this from dey-image-minimal.
This does not make any difference for IMX platforms but allows to
remove inconditional inclusion of dey-gstreamer for MXS. To allow
'gaku' (sato audio player) playing MP3 files COMMERCIAL_AUDIO_PLUGINS
is added to the distro config file.
* Only include 'owl-video' if MACHINE_FEATURES contains 'accel-video'.
* Remove inconditional inclusion of qt4-examples from dey-qt
packagegroup. Package qt4-examples is part of the RRECOMMENDS for
package qt4-demos, so it will be included anyway and not having it
hard-coded allows to bad-recommend it for some platforms and not
for others.
* Use BAD_RECOMMENDATIONS to avoid inclusion of 'qt4-demos-doc' package
for all platforms (this package does not add any value and weights
about 50MB) and 'qt4-examples' for ccardimx28js.
With all those changes, we get a graphical image with GTK + QT that fits
in the standard rootfs partition for ccardimx28js.
https://jira.digi.com/browse/DEL-1164
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package was used in 'meta-fsl-demos' layer, but was deprecated and
removed. It includes desktop launchers for QT4 demo/example apps. We
still show those demo apps, so integrate the launchers directly into a
qt4 bbappend.
https://jira.digi.com/browse/DEL-1164
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The interfaces file is now dynamically created for eth0, eth1 and wlan0. By
default they are configured if enabled in the machine features, and have
the same static configuration as before.
The static IPs can be configured as follows:
ETHn_STATIC_IP = "<ip address>"
ETHn_STATIC_NETMASK = "<netmask>"
ETHn_STATIC_GATEWAY = "<gateway>"
WLAN0_STATIC_IP = "<ip address>"
WLAN0_STATIC_NETMASK = "<netmask>"
To configure dynamic IPs you can use the following configuration in your
local.conf:
ETHn_DHCP = "dhcp"
WLAN0_DHCP = "dhcp"
https://jira.digi.com/browse/DEL-1178
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
By removing the driver on ifdown and loading it on ifup we workaround some
problems found in long run suspend stability testing.
https://jira.digi.com/browse/DEL-1084
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This removes the Openembedded logo and leaves the kernel splash until
the desktop is ready.
https://jira.digi.com/browse/DEL-1131
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Override the default from meta-fsl-arm for MX6 which is configured for
eGalax touchscreen.
We create an empty calibration file because the Fusion touch works just
fine without calibration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was needed to overcome some corner cases with storage devices on
suspend/resume using MDEV as device handler.
Now we are using UDEV and after some tests done it seems that the
'resume_storage_devices' hack is not needed anymore.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
udhcpc's '-R' option means 'Release IP on exit'.
This fixes a strange corner case on reboot: if you configure your network
interface to DHCP in '/etc/network/interfaces' AND you have some NFS
share mounted on your system, then running reboot command fails to
complete and it hangs on:
'Unmounting local filesystem'
This happens because on reboot TERM and KILL signals are sent to all
the processes in the system before umounting the local filesystem. When
udhcpc daemon receives the signal it exits and releases the IP (because
it was launched with '-R') leaving an unconfigured network interface
that later is unable to umount a network filesystem (NFS), resulting on
'reboot' command being unable to complete.
Removing the '-R' option from udchpc allows to kill the process without
unconfiguring the network interface.
https://jira.digi.com/browse/DEL-1125
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The original defconfig came from DEL. Make the defconfig more similar to
the Yocto default one.
This restores the default udhcpc options when running via ifup to '-R
-n'. This is important because without '-n' the target can wait forever
to get an IP on boot while maybe the network is not available.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In Yocto Daisy mplayer is not supported. Trying to build it fails with:
ERROR: Nothing PROVIDES 'mplayer'
ERROR: mplayer2 PROVIDES mplayer but was skipped: Recipe is blacklisted: Requires newer libav which has negative D_P
This is because it has been blacklisted in commit:
http://cgit.openembedded.org/meta-openembedded/commit/?id=2e7f3ce93b2c9864037fba8cc68fde46aafac4b0
The reason is that is has a build-time dependence on libav being newer
than the one provided by Yocto.
We don't use mplayer on ccimx6 as it has accelerated video using
gstreamer, so just remove the bbappend for this release.
Probably we need to revisit this when we upgrade our ccardimx28 support
to new versions of Yocto and upstream has removed the recipe from the
blacklist.
https://jira.digi.com/browse/DEL-1075
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Those hacks were added to fix a problem when building development images
(with 'dev-pkgs' image feature enabled). In that case the developemnt
packages (libdigi-dev and microwindows-dev) have a dependence on the
normal packages (libdigi and microwindows). But those packages are not
created by default because they are empty, thus the needed ALLOW_EMPTY hack.
Fix the problem by just resetting the runtime dependences of the -dev
packages. This allows to not create empty libdigi and microwindows
packages.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bbappend was created mostly to install an old version of the
'simple-agent' test application (the one included in the package was
failing) but upstream (Poky) has fixed most of the issues, so our
bbappend is just needed now to enable 'health' profile support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 1.5+snapshot.new tag does not work, so until there is an official 1.6
release use the last 1.5.1 SDK.
Fixes https://jira.digi.com/browse/DEL-988
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This packages was removed from 'meta-fsl-demos' and it's needed in our
graphical image, so for the moment add it to meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rework the conditional expression so the overall return value of the
script is not failure, because in that case the 'ifup' command fails
with:
run-parts: /etc/network/if-up.d/ifup exited with code 1
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This cleans following warning:
Use of PRINC is deprecated.
The PR server should be used to automatically increment the PR.
See: https://wiki.yoctoproject.org/wiki/PR_Service
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The purpose of this bbappend was just to remove the 'connman-gnome'
network manager that is the default in sato.
This can be done also in the distro config file without the need for a
recipe bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed in order to use eclipse as a graphical debugging IDE with
the Yocto eclipse plugin.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The adt-installer will use this tag to access content from
http://adtrepo.yoctoproject.org/, so the tag must be an existing folder.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
So the output of 'reboot' command does not spread over different lines.
This is basically a cosmetic change to make target's output on reboot a
bit more beautiful.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
'/run/vsftpd/empty' directory is created at runtime via volatiles
bootscript under /run TMPFS.
Workaround error:
ERROR: QA Issue: vsftpd: Files/directories were installed but not shipped
/run
/run/vsftpd
/run/vsftpd/empty
ERROR: QA run found fatal errors. Please consider fixing them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These files were needed in previous versions of Yocto to overcome
different problems. Remove them as the default ones in current Yocto
version are good enough for our platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Fix following error:
Warning: EGL suggested using X Visual ID 33 (ARGB0888) for EGL config 28 (ARGB0444), but this is incompatable
Unable to find an X11 visual which matches EGL config 28
https://jira.digi.com/browse/DEL-964
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We use udev as device manager both for minimal and graphical images so
there is no need for these mdev extensions anymore.
https://jira.digi.com/browse/DEL-944
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
rtc_test now can run with minutes instead of seconds resolution. This
is needed for RTCs that trigger the alarm on the minute register.
It also allows to override the default timeout from the command line.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the machine specific files for the ccimx6adpt platform. Initially
they are copied form the ccardimx28js as it is also planned to use
an Atheros chipset.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
After the upstream commit in d63c8a1597c9bd0a838cb59ca461ac432b630a90,
bitbake checks to see if the image feature has a valid packagegroup
associated.
For this check to work dey features need to be defined for all images,
not only dey images, so the definitions need to move to the distro
configuration file.
https://jira.digi.com/browse/DEL-852
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also make DEY image recipes more robust to misconfigurations, by setting
explicitly the required and conflict distro features.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLE variable has been deprecated in poky. The new
SERIAL_CONSOLES allows to configure multiple devices.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Features without a valid packagegroup need to be added to the
validitems list.
This needs to be in the distro configuration file as it needs to be
available to all images from all layers.
https://jira.digi.com/browse/DEL-853
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Virtual keyboard was not showing up when clicking on the keyboard icon
in the menu bar. The reason was the keyboard xsession script was not
being run on X startup due to the extension '.shbg' of the original
script.
https://jira.digi.com/browse/DEL-911
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This comes from the old Danny release where pulseaudio in minimal image
was giving a build failure (probablye due to dependences on X libraries)
This is not true anymore in Dylan, so just remove it for easier
maintenance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Give priority to FSL AAC decoder over others from the community when
using gstreamer's playbin2 or gplay
This allows to play some videos that fail otherwise.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Without the fix if we only configure *one* display in the vssconfig file
(i.e. we set just one entry in that file) the patch was discarding that
configuration and overwriting the configuration with dual display
defaults.
But configuring a single display in vssconfig should be doable, so fix
the patch to allow that.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We found that the gst-fsl-plugin package from Yocto is not exactly the
same than the one we used in DEL even though they have the same
version.
We think the one we used in DEL (released by FSL via LTIB) is more
recent and has some fixes, so create a first patch that applies on top
of the one in Yocto and convert it to the one in DEL.
Also instead of appending new patches to meta-fsl-arm SRC_URI, override
completely the variable and add the patches from meta-fsl-arm layer in
our own layer.
The final result is: we use the yocto tarball, then apply a first patch
that converts it to the one in DEL/LTIB, then apply the patches from
meta-fsl-arm and finally the ones added by us.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Fix the patch that adds support to select the framebuffer for
mfw_v4lsink. This used to work on non-graphical images (non-X), but it
had the side effect of breaking playing accelerated videos on graphical
images (using X) with graphica applications (QT, GTK).
This fix simplifies the patch so it still adds the dual display
functionality while not breaking the graphic media player applications.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Disable integer vorbis plugin as it conflicts with other vorbis
plugins. Error:
error: GLib-GObject-WARNING **: cannot register existing type `GstVorbisDec'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wpa_supplicant v2.0 was not available in Danny so we needed the whole
recipe, but it was updated in Dylan, so now we just need the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The source has machine specific code, so it needs the machine passed
in the compiler command line.
https://jira.digi.com/browse/DEL-863
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the IMX udev rules can be used without meta-digi-dey layer. For
example when building core-image-minimal with poky distro.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
They conflict.
Warn the user about the problem and let they change the device tree
manually.
https://jira.digi.com/browse/DEL-840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some test applications (e.g. gpio_test) use static device nodes. This
commit adds a bootscript that creates such device nodes reading from a
config file.
https://jira.digi.com/browse/DEL-458
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Simplify the package for maintainability and fix some minor things.
https://jira.digi.com/browse/DEL-818
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package provides 'ubiformat' command which is needed by
'update_flash' for UBI images.
https://jira.digi.com/browse/DEL-816
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We are now using the standard yocto kernel headers so the patch to build
the plugin with new kernel headers is not needed.
The rest of the changes in the bbappend (removing gconf dependence) were
needed in yocto-danny, but not in yocto-dylan because the gconf package
does not depend on libx11 anymore.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is hidden using Poky distribution because Poky has X11 distro
feature and then other x11-related dependences pulls in intltool-native.
In our case DEY distro does not have X11 feature and thus
intltool-native is not part of libsoup dependences. Then sometimes fails
and sometimes not depending on the bitbake threads (BB_NUMBER_THREADS)
and other race conditions.
Adding the dependence explicitly fixes:
run.do_configure: intltoolize: command not found
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The availability of some examples depends on the kernel version, so we
need to add the dependence to the packagegroup as well.
This allows to build two ccardimx28 projects one for kernel 2.x and the
other for 3.x sharing the state-cache. Otherwise the first project
builds correctly but the second one fails.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In ccardimx28 depending on the kernel version the console is on 'ttyAM0'
or 'ttyAMA0'. Use the standard serial port name ttyS0 for login (through
inittab) and let the device handlers create the symlink to the correct
device.
This allows to boot the same rootfs regardless of the kernel version.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wmiconfig is Atheros proprietary code so the recipe builds from source
if DIGI_INTERNAL_GIT is defined or uses a prebuilt binary otherwise.
https://jira.digi.com/browse/DEL-640
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
'simple-agent' python script included with this package depends on
python-pygobject and python-dbus
https://jira.digi.com/browse/DEL-643
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The initscripts package includes a '/etc/init.d/umountfs' script used
for reboot/poweroff purposes. That script calls the 'umount' command
but seems that the combination of busybox' umount + linux-3.x fails in
this script (it hangs without completing the reboot/poweroff).
So as a workaround use the umount command from util-linux package
https://jira.digi.com/browse/DEL-633
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Actually this is a workaround that probably needs to be generalized. But
at the moment the ccardimx28 is the only platform we have in linux 3.x
so it's enough.
https://jira.digi.com/browse/DEL-560
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The package is no longer available in the official cherokee site,
so download it from a mirror.
https://jira.digi.com/browse/DEL-584
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The dey-examples-adc and dey-examples-gpio packages are not meant to work
with a 3.10 kernel.
https://jira.digi.com/browse/DEL-574
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Modify the atheros and bluetooth init scripts to fetch the hwid details
from the device tree.
https://jira.digi.com/browse/DEL-572
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The acpid applet will run at startup and will listen for power input
events.
On arrival, it will timestamp the press event, wait for the release event
and decide whether to suspend or poweroff based on the time elapsed.
https://jira.digi.com/browse/DEL-34
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Similar commit was done in DEL.
Japanese law limits the maximum transmit power for Bluetooth to 3 mW.
The cert field in OTP will be set to 2 when units are manufactured
for Japan.
Updated the bluez init script to configure Bluetooth for class 2
operation if the cert field is set to 2, and to delete the class 1
configuration file since it would be illegal to use it in Japan.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Alsa-utils tools once compiled are distributed between a bunch of
different subpackages. Then 'alsa-utils' as a final package is just
a meta-package that depends on all of the different subpackages.
So instead of RDEPEND'ing on the alsa-utils metapackage, depend on just
a few of the alsa-utils subpackages.
This removes for example the 'alsa-utils-alsaconf' package that was
bringing bash into our rootfs.
Removing bash solves the problem of the lines-not-wrapped on the serial
console because now we use busybox' shell in the serial console.
https://jira.digi.com/browse/DEL-610
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In function 'gst_v4l2_fill_lists':
error: 'V4L2_CID_HCENTER_DEPRECATED' undeclared (first use in this function)
error: 'V4L2_CID_VCENTER_DEPRECATED' undeclared (first use in this function)
https://jira.digi.com/browse/DEL-585
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bbappend was only cleaning-up some bitbake warnings. A patch has
been accepted upstream (meta-fsl-arm) to do the same.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With the old version of the kernel (2.6.35) we build an external atheros
kernel module, while with the new kernel (3.10) the atheros driver is
included with the kernel sources.
However, the new driver needs the firmware files and the driver load
scripts that are stored with the old driver.
So put a dependence on kernel-module-atheros regardless of the kernel
version and then rework the kernel-module-atheros recipe to build the
whole driver for the old kernel or only the firmware for the new kernel.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The MACHINE_ESSENTIAL_EXTRA_* vars need to be only in the
'packagegroup-dey-core' recipe not in the rest of the packagegroups.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed so the kernel modules configured in the kernel defconfig
get added to the rootfs image.
At the same time there is no need to add the usb gadget modules
separately because they are added in the machine extra recommends as
well.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bbappend was done only to set the correct SRC_URI. This has been
fixed in upstream layer (meta-oe)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
QA Issue: Variable ALLOW_EMPTY is set as not being package specific
QA Issue: Variable RPROVIDES is set as not being package specific
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 3.10 kernel uses the upstream atheros driver.
Also, rationalize the RDEPENDS in the recipe to use the wireless
module variable instead of hardcoding values.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Remount the rootfs with 'noatime' option to minimize writes (avoiding
wearing-out the flash).
This also improves slightly the system performance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Restrict the compatible machines to the ones we have tested the examples
on.
The rationale of this is to remove the compatibility with CPX2 where
we have not tested the DEL examples and actually adding 'dey-examples'
feature to a CPX2 project fails to build with:
ERROR: Nothing RPROVIDES 'dey-examples-adc' ..
ERROR: dey-examples-adc was skipped: incompatible with machine cpx2 (not in COMPATIBLE_MACHINE)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe was way too complicated for what we need. Moreover there was
a build error in jenkins daily build due to this recipe:
WARNING: QA Issue: microwindows: Files/directories were installed but not shipped
/usr/bin
/usr/bin}
/usr/bin}/fonts
NOTE: Tasks Summary: Attempted 2628 tasks of which 2469 didn't need to be rerun and all succeeded.
Summary: There was 1 WARNING message shown.
| Collected errors:
| * satisfy_dependencies_for: Cannot satisfy the following dependencies for packagegroup-dey-debug-dev:
| * microwindows (= 0.91-dey.r0.0) *
| * opkg_install_cmd: Cannot install package packagegroup-dey-debug-dev.
So simplify it and fix the dependence so the jenkins job can be built.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some block devices are incorrectly mounted by udev. Instead of mounting
the partition device it mounts the disk device. This commit enhances the
automount udev rule and mount script so it only applies to partitions.
https://jira.digi.com/browse/DEL-511
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reviewed-by: Alex Gonzalez <alex.gonzalez@digi.com>
Allows to use '-c' parameter to 'stat' command.
This is needed in udev's automount script (next commit).
https://jira.digi.com/browse/DEL-511
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reviewed-by: Alex Gonzalez <alex.gonzalez@digi.com>
The official cherokee project page has repacked the source and broken
backwards compatibility. They also erase old images when new ones are
released.
This commit changes the download location to a mirror with the original
tarball that also keeps the archives.
https://jira.digi.com/browse/DEL-516
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
They removed old versions from the download location so 4.54 now fails.
https://jira.digi.com/browse/DEL-516
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The system freezes if we try to set the MAC addresses before the interface
is up, so check the state before doing it.
https://jira.digi.com/browse/DEL-509
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The final product will be called "Digi Embedded for Yocto" or DEY for
short.
This commit renames all relevant files.
https://jira.digi.com/browse/DEL-474
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Hector Palacios
Gonzalo Ruiz
Gabriel Valcazar
Arturo Buzarra
Hector Bujanda
Jose Diaz de Grenu
Isaac Hermida
Alex Gonzalez
Javier Viguera
Sebastian Pastor
Francisco Gil
Tatiana Leon
Mike Engel
David Escalona
Salvador Penalva
Alejandro Navarro
Pedro Perez de Heredia
Stephan Klatt
Jose Diaz de Grenu de Pedro
Victor Rubio
Urko Nalda
Paul Osborne