Similar to what we did on sysvinit, stop dnsmasq from starting automatically
on boot so NetworkManager can launch it via dbus.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The postinst script tries parsing the wireless MAC address from the sysfs, and
in case of failure, obtains a random string from /dev/urandom. This caused two
problems when booting with systemd:
* The wifi interface's sysfs entry is not available because the interface
hasn't had time to start up yet, forcing the script to always resort to the
/dev/urandom fallback.
* Even though the postinst scripts are run after populating the volatile
filesystems (as can be seen in run-postinsts.service's dependencies), trying
to read either /dev/random or /dev/urandom at this point in the system's
initialization causes it to lock up indefinitely.
To avoid either situation, add the following changes:
* Immediately exit when running on a non-wireless target, as the script isn't
necessary in this use case.
* Parse the wireless mac address from /proc/device-tree/wireless, which is
guaranteed to always be available when the script runs. By doing this, we can
remove the /dev/urandom fallback entirely.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This script behaves the same way as our custom standby script, with a few
modifications, for example:
* instead of using initscripts to stop/start daemons, it uses systemctl calls
* save variables that are needed when resuming in /tmp, because the script is
executed twice instead of once (when suspending and when resuming)
* remove the locking/unlocking of the critical section and the actual state
change, since that is handled by systemd-suspend now
Also, add a different standby script for when systemd is enabled. Said script
acts as a wrapper for systemd's suspend mechanism.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These changes are needed in order to achieve a behavior similar to our
bluetooth initscripts'.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This service acts as a systemd replacement for our bluetooth-init initscript.
All it does is call the initscript before starting the bluetooth stack.
Since initscripts dissapear from /etc/init.d when disabling sysvinit, move the
script to /etc/. Also, include bluez5-init as a packagegroup-dey-bluetooth
dependency regardles of whether systemd is enabled or not.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches don't apply on the latest version of systemd used in Yocto 2.6.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without systemd, our KEY_POWER events were handled by the ACPI daemon, which in
turn issued a "poweroff" command. With systemd, the ACPI daemon is no longer
available and the events are handled by systemd-logind instead, which also
powers down the system properly. However, NXP added a patch that prevents
system-logind from handling the events, since they use the sc_powerkey instead.
Remove this patch to be able to power the target off via our power button.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, there will be errors due to missing dependencies.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These have been ported directly from NXP's meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since poky commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede
reboot config was moved to init.cfg to provide this configuration
when busybox is selected as the init manager, however it is needed
for initramfs images where no init manager is set (see poky commit
ef4a417ab04779bd9fc8a6540a20cca7d14e98cf).
https://jira.digi.com/browse/DEL-6451
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 4b41d9072a304fadbe1cc37c94575f12a2a47fd3 in poky
busybox removes the RRECOMENDS dependency with busybox-syslog,
then we need to explicitly add this dependency in the recipes.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove git recipe to use the official 1.8.2 release and update
udev rules file to blacklist the network interfaces that ModemManager
must not manage.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 491082c56ce34f3fd644f8d4457ccd52af951087 in poky layer enables
by default some security enhancements and optimizations for the compiler,
These extra checks added by the flag -D_FORTIFY_SOURCE=2 break the
CloudConnector build. This commit disables the extra validations only
for the CloudConnector recipe.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed patches already integrated in the OpenSSL code and
refreshed the necessary ones.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Wireless tools is deprecated in favor of iw because the
wireless extensions have been deprecated in favor of the
new nl80211 interface for wireless devices.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The defconfig file has been refreshed for the current busybox
version 1.29.2 maintaining the same applets enabled.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script was added a long time ago and it never gets used anymore, so remove
it from our images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The point of this recipe is to provide the version of Bluez5 that was
certified. Thes certification does not apply to the ConnectCore 8X, and the
recipe currently fails to build due to missing files. Hence filter out the
ConnectCore 8X from this recipe.
This clears the following warnings:
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry bluetooth-init: file could not be found
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry main.conf: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit bf9688fd08ac9e8823a5a253bdd1acacd1c0870e)
Trustfence is not supported in the CC8X at the moment. This cleans the
following warning:
WARNING: meta-digi/meta-digi-dey/recipes-core/trustfence/trustfence-initramfs.bb: Unable to get checksum for trustfence-initramfs SRC_URI entry trustfence-initramfs-init: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 778fc424274fc0983c348f4da6ca09e1a7b5b859)
vpx was wrongly removed when updating the recipe to version 1.14, but it's
required to build x11 images for the ccimx6ulsbc.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 1e2244afcd)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
CC8X SBC Pro's LPUART0 port is routed to the Expansion connector.
The UART located in the XBee socket, MCA UART, is not currently supported
so comment the XBee Cellular rule for the moment.
https://jira.digi.com/browse/DEL-6417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The defconfig file has been refreshed for the current busybox
version 1.27.x maintaining the same applets enabled.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In 92c49b9b1a16dfd35444db8143bd4cae4cda70cc was introduced the LAYERSERIES_CORENAMES
and LAYERSERIES_COMPAT_<layername> with the intention of allowing layers
to indicate which versions of the core project they're compatible with.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
qt3d sometimes fails to build due to an upstream issue that has yet to be
resolved. Since this interferes with our daily builds from time to time, remove
qt3d from our images completely.
https://jira.digi.com/browse/DEL-6348
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
SOM v1 is not going to be released, so there's no need for a revision check.
Now that hw flow control is available, use it along with the highest baudrate
possible.
This reverts commit e4fbba3dde.
https://jira.digi.com/browse/DEL-6254
Our current OpenSSL libraries are only functional when applications link
against v1.0.2d or higher, making some packages containing pre-compiled
applications that link to older versions (like AWS Greengrass) fail to build
and/or run properly.
This commit includes:
* Changing SHLIB_EXT from so.1.0.2 to so.1.0.0
* Reverting the version-script to an older version with backwards
compatibility plus newer symbols
Specifically, these changes partially revert the patches added in the poky
layer's commits a59bfd05d15085a3dc5669b47fd19867246c846b and
73a43fc15e0463c39baaadecab78fb3ef51b8cd0 respectively.
Please note that this only modifies the cryptographic library's ABI, its code
remains unchanged.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their BSP support is
currently unavailable.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Digi vendor kernel uses a dedicated HCI UART driver with support for
In-Band Sleep (IBS). This driver, when used with a QCA vendor ROME plugin
for hciattach, is able to upload a new firmware version to the Bluetooth
chipset, as well as set the MAC address directly on the firmware.
Mainline BSP uses the HCI H4 driver instead and the "qualcomm" hciattach
plugin which is not able to upload firmware to the QCA6564 chipset.
As such, when using mainline the chipset uses the ROM firmware and the
bluetooth init script has been adapted accordingly.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The meta-freescale layer assumes that when you define the use-mainline-bsp
the platform is going to use the etnaviv gpu driver. This is not the case
for the CC6UL as the mxsfb.c driver is still not DRM capable.
Probably this will change in v4.19 as there is a DRM capable mxsfb.c
driver that will make it possible to use the armada xf86 driver with the
etnaviv fbdev emulation.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
* Check for file before using it
This just avoids the failure, on mainline access to OTP would need to be
done differently, see:
https://jira.digi.com/browse/ACL-163
* Use compatible node instead of digi,machine,name
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 4d35d15fee)
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
During the merge of the maintainance branch and the manual revert of
some recipes, these were forgotten.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The generate_installer_zip() function had a hardcoded "u-boot" filename when adding
the bootloader to the list of files that are put in the installer .zip.
https://jira.digi.com/browse/DEL-6174
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Set a lower baudrate of 115200bps for bluetooth on SOMv1 since
hardware flow control is not available.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
These packages create dependency issues when compiling framebuffer images, and
they aren't essential. Include them only in ccimx6 images.
This reverts commit 2edb127d28.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The sources for this package do not exist anymore, causing the build to fail
unless said sources can be obtained via a mirror.
https://jira.digi.com/browse/DEL-6147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Currently, it isn't possible to wake up the ccimx8x after suspending to RAM.
For now, use the less strict "freeze" low power mode instead.
https://jira.digi.com/browse/DEL-6148
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe's contents are unchanged, but the version number in the recipe name
will now match the rest of the vivante-related recipes.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The package is now available for download on NXP's mirror, so we can fully sync
our recipe with the one in meta-fsl-bsp-release.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also remove our .bbappend, since it's not needed anymore after updating our
machine overrides.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These packages are required for videos to play properly on the ccimx8x. Also,
add gstreamer1.0-libav explicitly since the only package that depends on it
(gst-player-bin) was removed from packagegroup-core-x11-sato.
https://jira.digi.com/browse/DEL-6026
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is done in meta-fsl-bsp-release when building xwayland images, so port it
to our layer.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This updates our Qt5 packagegroup with all of the packages included in NXP's
fsl-image-qt5-validation-imx.bb.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This merges our Qt5 recipes with the ones in meta-fsl-bsp-release.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These recipes update Qt5, its plugins and adds wayland support.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some of these recipes might not be strictly necessary for xwayland to work, but
they are related, so I have added them just in case.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
vpx was wrongly removed when updating the recipe to version 1.14, but it's
required to build x11 images for the ccimx6ulsbc.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The newer version used for the ccimx8x has a different license, so its checksum
must be changed.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package depends on libg2d, and the latest version of this library's
sources for imx6 platforms are currently unavailable. Among other things, the
newer sources add a symbol needed by imx-gst1.0-plugin to compile, so this
patch manually adds the symbol as a macro in the package's source code.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The aarch32 recipe will remain the same for now, since the newer sources aren't
yet available in NXP's mirrors.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The most important change here is the package's revision.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We now have different tarballs for each CPU architecture we compile for. Also,
add support for the aarch64 tarball.
https://jira.digi.com/browse/DEL-6046
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their SOM support is
currently unavailable.
https://jira.digi.com/browse/DEL-6049
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Display Processing Unit (DPU) on the i.MX8 is what NXP used to call
Image Processing Unit (IPU) on the i.MX6 family.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 15139a3e97 wrongly removed 'vpx' from plugins-good which
is needed to play WebM files on the CC6UL.
The packagegroup-dey-gstreamer also needed to be updated to use
'pulseaudio' from plugins-good which was apparently renamed from 'pulse'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
(cherry picked from commit 29add13409)
adc_sample:
- extend list of supported devices with MCA_CC8X
adc_cmp_sample:
- Add '-t' argument to specify the type of device.
- Added checking of threshold ranges to avoid confusion between
raw and voltage configurations.
https://jira.digi.com/browse/DEL-6001
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Commit 15139a3e97 wrongly removed 'vpx' from plugins-good which
is needed to play WebM files on the CC6UL.
The packagegroup-dey-gstreamer also needed to be updated to use
'pulseaudio' from plugins-good which was apparently renamed from 'pulse'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
- For most examples, since they apply to all platforms, remove
COMPATIBLE_MACHINE.
- For recipes related to specific hardware, add support to the new platform
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
While on it:
- add dey-examples-rtc unconditionally (rtc is never in MACHINE_FEATURES)
- add missing recipes: digiapix, cryptochip
- re-order them alphabetically.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Gabriel Valcazar
Arturo Buzarra
Jose Diaz de Grenu
Gonzalo Ruiz
Hector Palacios
Mike Engel
fgilmar
Alex Gonzalez
Hector Bujanda