There are different SBC boards IDs each one having a different
device tree file in the form imx6X-ccimx6sbc-idZZZ.dtb, where:
X is the CPU family (q=Quad/Dual, dl=DualLite/Solo).
ZZZ is the board ID number.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2160
That's the u-boot configuration used by variants 0x07 and 0x09, which
have been cancelled and are no longer supported by DEY.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These tools are part of the official FSL gst1.0 plugin. Add then to the
MACHINE_GSTREAMER_1_0_PLUGIN variable so they get added to the rootfs.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove QT4 phonon patches and qtmediaplayer demo as they depend on
gstreamer-0.10.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 2.0
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Split the ATH6KL firmware files to a different recipe and package so
they can be used regardless of what driver we are using (the external
module or the upstream driver).
Reuse the 'firmware-atheros' recipe which was creating a package with
bluetooth firmware, to create the package with wireless firmware as
well.
Also remove 'ccimx6' as compatible machine for the external atheros
module, as the module does not even compile with the kernel version we
are using (3.14).
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Which wireless module to use belongs more to the machine config files in
the BSP layer, than to the generic wireless packagegroup.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one u-boot supported for each platform, so there is no
need to explicitly set the u-boot preferred version.
As a result it was needed to rework the nvram recipe which was using the
removed PREFERRED_VERSION_u-boot-dey variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of creating a new recipe for u-boot fw-utils (fw_printenv) just
bbappend the recipe in Poky.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Linux 3.10 is still available via project's local.conf.
PREFERRED_VERSION_linux-dey = "3.10"
KERNEL_DEVICETREE = "..."
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Platform defconfig corresponds to sha1 'e1506ff' in the kernel.
At this point linux-3.10 continues to be the default, some device-tree
files were renamed and the external atheros module does not compile with
linux-3.14, so to use this kernel with dey-1.8, following lines are
needed in the project's local.conf:
PREFERRED_VERSION_linux-dey = "3.14"
KERNEL_DEVICETREE = " \
imx6dl-ccimx6sbc-wb.dtb \
imx6dl-ccimx6sbc-w.dtb \
imx6q-ccimx6sbc.dtb \
imx6q-ccimx6sbc-wb.dtb \
imx6q-ccimx6sbc-wb-ldo-bypass.dtb \
imx6q-ccimx6sbc-w.dtb \
"
MACHINE_FEATURES_remove = "wifi"
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 'resize2fs' command we use to resize the filesystem on first boot
has been moved from standard 'e2fsprogs' package to its own
'e2fsprogs-resize2fs', so this is the one we need to include now.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed in the context of CC6 variants 0x7 and 0x9 (EMMC-less).
Changes:
* Do not use 'meta-fsl-arm' image generation class: removed include and
override SDCARD generation function
* Use same VFAT boot image for EMMC and SD card. The u-boot bootscript
has been adapted to be able to boot Linux from both SD and EMMC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8b8456b8fd90facd92dfc87632effa582ca60475)
This will allow in following commit to use the same VFAT boot image for
EMMC and SD. Until now we were creating different boot images for EMMC
and SD card images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 13e9ec7608d42430c2a01a728d030752a71f7948)
Use Yocto's UBOOT_CONFIG new functionality to select the u-boot
configuration to build.
https://jira.digi.com/browse/DEL-1584
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the current DEY variants support and framework for CC6 because in
following commits we will add support for all *hardware* variants in
just one set of DEY images for CC6.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The IMAGE_FSTYPES variable for ccimx51js and ccimx53js was not correct,
it was taking the default one from Poky (IMAGE_FSTYPES="tar.gz")
instead of the one in 'imx-digi-base.inc' file. This happened because we
were using the weak '??=' assignement while the default in Poky was
using '?='.
Also rework a bit how this variable is set, so it is easily overriden on
project config files or initramfs recipes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove support for device tree variants as it's not needed. We will
only have different device tree for the different CPUs, but not for the
different variants of the same CPU.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Variant 0x8 does not have wireless/bluetooth, but it uses the same
device tree than the other variants.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3ba5bff51ebbe6be8325128ae3beb950993607d2)
Variant 0x5 (Furuno) does not have bluetooth, but the device tree in the
kernel is the same than the variant with bluetooth.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 7de11f08e95fecb8d4895556292a488a91af6817)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 015d029255eb407cca4c986562a304aef7de3940)
Kernel 3.10 does not fail to build perf features (as kernel 2.6.35
does), so there is no need to disable them for platforms using that
kernel version.
https://jira.digi.com/browse/DEL-1418
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Revert to the old way of setting the console for ccardimx28js. Configure
the console on the generic ttyS0 port name and let the device managers
create a symbolic link to the correct device at runtime.
Trying to set it statically at compile time lead to some side effects
with some packages not being recompiled after a change of the preferred
kernel version in the project's local.conf (e.g. udev-extraconf and
sysvinit-inittab).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLES_CHECK is new functionality provided by Yocto, but it
needs '/proc/consoles' supported by the kernel. Our kernel 2.6.35 does
not support '/proc/consoles' so rework the serial console configuration
to work with both kernels (2.6.35 and 3.10).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The i.MX6 has an internal PMU with LDOs to supply voltages to the different
ARM sybdomains. There are two possible configurations, to use this internal
LDOs or to use the external PMIC to supply the voltages (LDO bypass).
The default is to boot with LDO bypass, and the device tree with the -dts
suffix will boot with the i.MX6 internal LDO.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
In Yocto 1.7 meta-fsl-arm replaced udev-extraconf bbappend with a new
package (udev-rules-imx). So we need to adapt our own bbappend to these
changes so all the needed udev rules are in place.
https://jira.digi.com/browse/DEL-1336
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We inherited from DEL the requirement to build more than one flash image
for the same rootfs contents depending on the EBS of the flash chip.
Yocto does not have support to generate more than one flash image so we
had to create functions in the image_types_digi bbclass to provide this
feature.
This commit removes that functionality and uses the standard yocto
support to generate ubifs and jffs2 flash images. The way to customize
the flash parameters is via EXTRA_IMAGECMD_jffs2 and MKUBIFS_ARGS
variables. In our case those variables are already set depending on the
different hardware variants.
https://jira.digi.com/browse/DEL-232
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for Dizzy maintenance branch.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The interfaces file is now dynamically created for eth0, eth1 and wlan0. By
default they are configured if enabled in the machine features, and have
the same static configuration as before.
The static IPs can be configured as follows:
ETHn_STATIC_IP = "<ip address>"
ETHn_STATIC_NETMASK = "<netmask>"
ETHn_STATIC_GATEWAY = "<gateway>"
WLAN0_STATIC_IP = "<ip address>"
WLAN0_STATIC_NETMASK = "<netmask>"
To configure dynamic IPs you can use the following configuration in your
local.conf:
ETHn_DHCP = "dhcp"
WLAN0_DHCP = "dhcp"
https://jira.digi.com/browse/DEL-1178
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will be the preferred version for ccardimx28. Then use platform
override to set the one for ccimx5 and ccimx6.
Not having a platform override in the machine config file allows to do
a simple version override in the project's local.conf file with:
PREFERRED_VERSION_u-boot-dey = "2009.08"
Otherwise, if we use a platform override in the machine config that
takes precedence over a normal override in the project's local.conf
and we would have needed something like:
PREFERRED_VERSION_u-boot-dey_ccardimx28 ?= "2013.01"
in the project's config.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
FSL has this enabled but in our case it fails to build for ccardimx28js
using linux 3.10 with error:
fatal error: linux/mxcfb.h: No such file or directory
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add platform family to SOC_FAMILY, so it's part of the MACHINEOVERRIDES
variable and it can be used to generalize bitbake recipes.
https://jira.digi.com/browse/DEL-1105
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for Daisy maintenance branch.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
While on it, rework and simplify atheros firmware recipe:
* remove 'unknown' version (renamed recipe)
* do not create empty debug and development packages
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was broken after the upgrade to Yocto 1.6 because the framework to
generate images in Yocto 1.6 changed.
https://jira.digi.com/browse/DEL-1032
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently Vivante does not provide a valid GL API so Xorg fails to link
against it, we cannot workaround it easily in newer Xorg version so
instead of maintaining a pile of patches for it we use 1.14.4 version
as an interim solution.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was added to fix [DEL-898] but it is no longer needed after the
underlying changes in the rootfs hierarchy (added '/run' mountpoint)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Provides fw_printenv/fw_setenv utilities to read/write the u-boot
environment from Linux.
https://jira.digi.com/browse/DEL-800
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment this image is a VFAT file system containing the kernel
and the device tree blobs.
https://jira.digi.com/browse/DEL-932
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is now used in both ccimx6adpt and ccardimx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Previously jffs2 images flashed from u-boot were not booting Linux. The
kernel was unable to mount the rootfs.
There have been some patches lately in the kernel that fix this problem,
so build jffs2 images.
Nevertheless the default image type is still ubifs when using linux 3.x.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLE variable has been deprecated in poky. The new
SERIAL_CONSOLES allows to configure multiple devices.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The do_update_dts function was hardcoded for ccardimx28js. We need to
make it mxs specific so the recipe can be used for other platforms that
do not share the same device tree configuration (for example the
upcoming ccimx6js)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the BOARD selection out of the bootlets recipe so it can be used
from machines defined in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the flash parameters to the machine configuration files so it's
easier to create derivative machines and use the image bbclass to create
flash images.
(based on a patch from Seth Bollinger <sethb@digi.com>)
https://jira.digi.com/browse/DEL-682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use a variable to select GPU flavour (X11, framebuffer).
No functionality change, just coding style.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Those boolean helper variables can be used in different recipes so move
them to a common place.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment our kernel 3.10 on ccardimx28js does not support jffs2
images, so do not build them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is still a runtime-recommend of udev package so it gets installed
in udev based images (graphical) and not installed in mdev based images
(minimal).
https://jira.digi.com/browse/DEL-825
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In ccardimx28 depending on the kernel version the console is on 'ttyAM0'
or 'ttyAMA0'. Use the standard serial port name ttyS0 for login (through
inittab) and let the device handlers create the symlink to the correct
device.
This allows to boot the same rootfs regardless of the kernel version.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wmiconfig is Atheros proprietary code so the recipe builds from source
if DIGI_INTERNAL_GIT is defined or uses a prebuilt binary otherwise.
https://jira.digi.com/browse/DEL-640
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The machine variant is most specific than machine name.
Before: MACHINEOVERRIDES="armv5:mxs:wb:ccardimx28js"
After: MACHINEOVERRIDES="armv5:mxs:ccardimx28js:wb"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The UBOOT_LOADADDRESS and UBOOT_ENTRYPOINT variables are only used in
the kernel recipe, so remove from the machine configuration files.
Also, use the defconfig from the kernel tree which compiles all the
support by default and expects the device tree to be configured with
the desired support. Hence, remove all the empty configuration fragments
files.
https://jira.digi.com/browse/DEL-577
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The build was failing for any IMX platform because it was trying to
build a bootstream u-boot.
The u-boot variables (UBOOT_*) used by yocto were incorrectly set,
so I reworked and simplified them to fix the bug and ease maintenance.
https://jira.digi.com/browse/DEL-562
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 2.6.35.14 kernel calls the serial device ttyAM0 while the 3.10 which
uses a different driver calls it ttyAMA0.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
We need separate linux-libc-recipes if we want to support different
kernels.
On the 1.4 meta-fsl-arm layer this recipe will disappear, so review then.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The final product will be called "Digi Embedded for Yocto" or DEY for
short.
This commit renames all relevant files.
https://jira.digi.com/browse/DEL-474
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Fix the kernel wireless configuration fragment, and add a couple of kernel
patches to set up the mmc0 interface to be used with the wireless and
remove an incorrect pin configuration.
There are similar patched to this on the gateways/master branch related to
the vehicle bus adapter product.
meta-digi-arm/conf/machine/cpx2.conf
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Mostly cosmetic changes to clear it a bit so customers can use it as
documentation for what variant they need to configure in their projects.
Also a couple of minor fixes: 'ext-eth' typo and duplicated 'e' variant
for ccimx53js.
https://jira.digi.com/browse/DEL-460
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Running:
bitbake -c cleanall packagegroup-machine-base
was failing due to those trailing backslashes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The previous "+=" format was doing a complete variable override instead
of an append. Features like usbhost or usbdevice were disappearing.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
I have split the machine configuration in two:
-The module machine configuration include, for example ccimx53.inc
-The machine configuration (for example cimx53js.conf) which includes
the variant configuration.
This will allow for customers to create their own machine keeping the
module include file.
The variant can be configured in the local.conf file with a
MACHINE_VARIANT variable.
The variant names are made up of the interface initials as follows:
w: wifi
e: externel ethernel
b: bluetooth
1: 1-wire
a: accelerometer
g: GPU
v: VPU
128: 128MB RAM
4k: 1024MB NAND (only for MX51 JTAG flash)
For details regarding the supported variants, each machine configuration
file contains a comment with a variants table.
https://jira.digi.com/browse/DEL-330
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Remove the machine rdepends and move to del-wireless which is only
included for the wifi machine feature.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Not yet finished as not all the cpx2 variants support wireless.
This has to be enabled per-variant.
https://jira.digi.com/browse/DEL-134
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Do not generate them until they are properly tested and working.
Fixes https://jira.digi.com/browse/DEL-192
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The del-image-minimal will included the graphical acceleration libraries
if the machine supports accel-graphics.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The del-examples-sahara now depends on the kernel modules it needs to
work and these are autoloaded at boot.
Fixes DEL-274.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For this the CCIMX51 and CCIMX53 kernels are configured to build the
mma7455l module and it is included as a dependency of the del-examples-
accelerometer application.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
So they don't depend on the machine files from meta-fs-arm layer.
This allows to override some settings in project's local.conf file.
https://jira.digi.com/browse/DEL-219 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Just a cosmetic name change for the merged wired and wireless platforms.
This and related commits fixes https://jira.digi.com/browse/DEL-188.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This fixes a bug in 'ccardxmx28js' where the wpa_supplicant was using
the wrong driver 'wext' instead of the 'nl80211' (for atheros)
https://jira.digi.com/browse/DEL-220 #resolve
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
U-Boot has a set of pre-defined make targets per platform that allow
to configure u-boot for different variants (128sdram,4Kpage,dbg etc.)
This change allows to use a UBOOT_CONFIG_VARIANT variable in your
local.conf file to choose which variant to build.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The ConnectCard needs a bootstreamed (.sb) u-boot to boot from flash. This
is flashed using u-boot.
This changes compiles a bootstream u-boot image. The bootlets are compiled
separately and it's U-Boot's Makefile that calls elftosb to generate the
final bootstream.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This package contains firmware files for the MXS Digi family (Embedded and
boxed products).
Now it contains the bluetooth binary firmware files.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
It will be included in all machines that include the bluetooth feature,
currently the ccardxmx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The mx5 GPU libraries provide OpenGL ES1, OpenEGL and OpenGL ES2 only
so we need to ajust the PREFERRED_PROVIDER.
There is an equivalent commit in FSL layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed to use SOC_FAMILY data and was the reason why imx-lib was
not compiling correctly (see commit cec37f0).
Thus revert also commit cec37f0 because that workaround is not needed
anymore.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This included the recipe where the driver is cloned from git and compiled
from source.
The recipe also copies the firmware files and the if-pre-up scrip.
Pending is the recipe to link from precompiled objects in a .tar.gz file.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Now that all code is our own as we are not copying recipes into the
layer but overriden the ones in meta-fsl-arm, the prefix to comments
have no use.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
In this way the layer should still be able to compile the default
machines supported by meta-fsl-arm.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- imx-digi-base includes imx-base and contains the overrides.
- mxs-digi-base includes mxs-base and contains the overrides.
- digi-defaults contains the overrides to fsl-default-settings,
fsl-default-providers and fsl-default-versions.
- The machine configuration files include the digi includes and also
contains the UBOOT load addresses overrides.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Hector Palacios
Javier Viguera
Alex Gonzalez
Francis Sreeves