The SMARC module uses both Ethernet controllers, so ENET2 is
no longer optional.
The DVK does no longer have a MikroBUS connector so the
Mikro-E overlays are no longer needed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For the ccimx95 SMARC module, the power button is connected
to the MCA, and the MCA is the one that generates the signal
to the ON_OFF input. In the SMARC design, the power button is dedicated
(there is a different button for standby) so we want short key
presses to be treated as a poweroff event right away.
We also want systemd to ignore long presses, as these are absorbed by
the MCA firmware to forcefully power off the PMIC.
When SMARC is disabled, use the default behavior:
- short press: suspend
- long press: graceful poweroff
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The ConnectCore 95 SMARC module has an MCA so we need to
build the mca-tool for this platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Due to GPIO1 port belongs to the Always-ON (AON) domain and probed last,
port GPIO4 is probed as gpio2.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
For SOM v2, the Wi-Fi chipset has been changed, which requires
overlays that are specific to cc95, different than the ones
for cc93/cc91.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9915
We support only B0 silicon revision and that is already set on
"imx-digi-base.inc" for all mx95 based machines.
https://onedigi.atlassian.net/browse/DEL-9811
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Different platforms use different Cortex-M processors, so instead of
using the M4_DEFAULT_IMAGE_MX95 (as meta-imx does) for an M7 processor,
generalize to the CORTEXM_DEFAULT_IMAGE variable name. Also, move it
to the imx-boot recipe (where it is used) and deploy that image to
the imx-boot-tools directory, so the imx-boot image can be regenerated
externally (without yocto).
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove IMAGE_BOOT_FILES and related WKS dependencies from ccimx93-dvk and
ccimx95-dvk machine configs. IMAGE_BOOT_FILES defines the files included
in the boot partition when creating WIC images. The removed files are
the Cortex-M demo firmware that we don't want on the boot partition of
our WIC image.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the ccimx95 platform cloned from mx95lp5. Provide DDR configuration,
configure the console on lpuart6, and update ccimx95-dvk.conf to select
the new board.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Hector Palacios
Javier Viguera
Francisco Gil
Gonzalo Ruiz