The systemd class adds by default packages named ${PN} to the
SYSTEMD_PACKAGES variable, but in our case the package name is
'${PN}-init', so it needs to be added explicitly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package needs to be installed in the rootfs for the demos to work.
Reported-by: Alfonso Martin Rey <alfonso.martinrey@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These classes needs to be inherited so the different init services
(sysv, systemd) execute the script on boot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise there are QA check failures:
package imx-codec-test-bin requires librt.so.1, but no providers found in RDEPENDS_imx-codec-test-bin? [file-rdeps]
package imx-codec-test-bin requires libc.so.6(GLIBC_2.4), but no providers found in RDEPENDS_imx-codec-test-bin? [file-rdeps]
...
This is due to the 'imx-codec-test-bin' package containing NXP-provided
pre-built binaries that are compiled with GLIBC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Clean up this warning on build:
python3-xbee: No generic license file exists for: MPL2.0 in any provider
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Update the README as well to reflect this change, since the ftp protocol might
be blocked in some corporate networks.
https://jira.digi.com/browse/DEL-6880
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also remount the root filesystem as 'rw' when the symlinks need to be
updated.
https://jira.digi.com/browse/DEL-6760
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Obtain the mount point of the filesystem to remount as 'read-write' from
/proc/mounts to avoid issues related to df output wrapping on a second line
when the device filesystem name is too long.
When the script finishes, remount the filesystem as 'read-only' if that was
the original access permission.
https://jira.digi.com/browse/DEL-6760https://jira.digi.com/browse/DEL-5854
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Since the final image name is not available in a global scope, append it to the
default installation path in the SDK extraction script once it has been
packaged.
The new default installation path format is:
/opt/dey/<version>/<platform>/<image>
https://jira.digi.com/browse/DEL-5264
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a332ff445f)
The previous patch was outdated, but now that we have a working PKCS11 engine
and the cryptochip supports it, update the patch with the new engine info.
https://jira.digi.com/browse/DEL-6835
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This adds the same example application that was used for the old version of the
library, but it has been separated into a proper package this time.
Recommend said package when installing the library.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This version is based on the 20190517 master release, with the addition of
pkcs11 provisioning support.
The source code now has cmake files, so we don't need as many code
customizations as we used to. Revamp the recipe and its patches.
https://jira.digi.com/browse/DEL-6826https://jira.digi.com/browse/DEL-6835
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version Microchip recommends to use in for the newer cryptoauthlib
with pkcs11 support. This recipe was backported from the zeus branch of
meta-openembedded.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package has not been supported since OpenSSL was updated to v1.1.x, and it
has been deprecated by Microchip.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Added QtQuickControls package on framebuffer images for ConnectCore 6UL
platform to improve the user experience. It is not added to X11 images due
to size limitations.
https://jira.digi.com/browse/CC6UL-1108
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This imx-seco recipe manages now the NXP IMX SECO firmware, it was removed
from the firmware-imx recipe.
https://jira.digi.com/browse/DEL-6823
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In very rare cases, random services would hang when powering off the system,
causing the poweroff process to stall for 90 seconds before timing out the stop
job. To avoid this behaviour, minimize the effect of these random freezes by
decreasing the timeout.
The default services in our system take well under 15 seconds to stop
gracefully, so we can guarantee that a timeout will never happen under normal
circumstances.
https://jira.digi.com/browse/DEL-6794
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, systemd will have to guess the PID of the service's main process.
It guesses right most of the time, but sometimes it chooses the PID of the
original pulseaudio process instead of the daemon that gets forked off. This
caused the daemon to stop immediately after starting, breaking other apps that
require the pulseaudio server to be running.
Since the PID file is created in a user-specific runtime directory (and the
service is meant for the whole system), modify the wrapper script to create
a symlink to the PID file in a place where it can be obtained by systemd.
https://jira.digi.com/browse/DEL-6795
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Generalize script to select the correct board data file to load into the
wireless chip depending on the Regulatory Domain configuration whether it
is a variation of 'bdwlan30.bin' or 'fakeboar.bin'.
If 'bdwlan30_US.bin' or 'bdwlan30_World.bin' files are found in the firmware
directory, the script will create two symlinks, 'bdwlan30.bin and 'utfbd30.bin',
pointing to either one of those files.
If no 'bdwlan30_*.bin' files are found, but 'fakeboar_US.bin' or
'fakeboar_World.bin' is, it will create a single symlink, 'fakeboar.bin',
pointing to either one of those files. In the case a QCA6574 community driver
is loaded, 'board.bin' symlink will be updated.
If no 'fakeboard_*.bin' files are found either, the script will exit.
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update file:
- fakeboar.bin (e1db4a300b58776f8abd8588beadc09e)
This file was generated by calibrating several CC8X SOMs and SBCs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Default poky's version of the 'mount.sh' script doesn't account
for the possibility of udev calling twice the script for the 'add'
action. This has been observed on USB sticks connected to a USB hub
and, although the script eventually fails, for already mounted
partitions, in that case the script tries to remove the created
mountpoint, when it shouldn't.
This patch checks for already mounted partitions earlier (before
creating the mount point) and returns with no actions.
The patch that it adds (with respect to poky's thud default) is
the following:
diff --git a/meta/recipes-core/udev/udev-extraconf/mount.sh b/meta/recipes-core/udev/udev-extraconf/mount.sh
index 3ee67b13183a..e6882a69c223 100644
--- a/meta/recipes-core/udev/udev-extraconf/mount.sh
+++ b/meta/recipes-core/udev/udev-extraconf/mount.sh
@@ -38,6 +38,12 @@ done
automount_systemd() {
name="`basename "$DEVNAME"`"
+ # Skip already mounted partitions
+ if [ -f /run/systemd/transient/run-media-$name.mount ]; then
+ logger "mount.sh/automount" "/run/media/$name already mounted"
+ return
+ fi
+
# Skip the partition which are already in /etc/fstab
grep "^[[:space:]]*$DEVNAME" /etc/fstab && return
for n in LABEL PARTLABEL UUID PARTUUID; do
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6759
* Added CC6 and CC6Plus as supported platforms.
* Added CC6 and CC6Plus known issues and limitations.
* Re-ordered platforms from newest to eldest (CC8X, CC6UL, CC6Plus, CC6).
* Updated links to documentation 'Get started'.
* Updated links to products and variants on digi website.
* Added changelog for DEY-2.6-r2.
* Remove mention to kernel version for P2P limitation of CC6UL.
* Added note about incompatibility of newest SCFW.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update file:
- fakeboar.bin (3e558869e3943da08899abd881455bc6)
This file was generated by calibrating several CC8X SOMs and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The current scripts used the standard mount binary at /bin/mount
for mounting the partitions. Systemd however seems to have a monitor
that eventually umounts such partitions if not mounted by systemd's
specific command 'systemd-mount`.
For platforms using systemd, we need to use this binary together with
parameter --no-block so that partitions are mounted correctly during
the boot process.
This commit merges the two scripts for Digi-handled partitions into
just one:
mount_bootparts.sh
\
+--> mount_digiparts.sh
/
mount_partition.sh
The merged script:
- checks if running with systemd, to use its binary.
- checks if running with busybox, to not use the unsupported '-o'
attribute.
- checks if mounting the 'linux' partition, to mount it read-only.
- checks for already-attached UBI devices, to avoid re-attaching.
This commit also combines the Digi-handled partitions (linux, update)
into the same udev rule, to simplify it, and breaks the rules lines
for readability.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6744
The default service only starts once per non-root user. Add a service that
starts pulseaudio by default along with a wrapper script that sets the
necessary environment variables before launching the daemon.
https://jira.digi.com/browse/DEL-6746
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use ifupdown variable 'p2p-network-id' to pass a WPA supplicant network
id, to pre-populate some parameters (SSID/passphrase) when creating the
group where this device is the GO.
Also replace go_intent=7 with the auto parameter. According to the
documentation:
"auto" can be used to request wpa_supplicant to automatically
figure out whether the peer device is operating as a GO and if so,
use join-a-group operation rather than GO Negotiation.
https://jira.digi.com/browse/DEL-6741
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the error message when specific network scripts
are launched.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6728
This was reported by the build:
Some of the context lines in patches were ignored. This can lead to incorrectly applied patches.
The context lines in the patches can be updated with devtool:
devtool modify <recipe>
devtool finish --force-patch-refresh <recipe> <layer_path>
This is the result of running the above commands to have
the patches automatically updated on their context lines:
devtool modify weston
devtool finish --force-patch-refresh weston meta-digi-dey
While on it, remove also the initial "From <SHA1>" lines.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add support for greengrass 1.9.2 and remove it for 1.9.0.
Support for 1.9.0 was never released and that version is
no longer available.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The most current revision is incompatible with the v4.9 Linux UAPI. Reverting
to the previous commit of the imx-alsa-plugins repo reverts the UAPI changes
while keeping the same functionality, so use this revision for the ccimx6 and
ccimx6qp.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Javier Viguera
Gabriel Valcazar
Gonzalo Ruiz
Jose Diaz de Grenu
Francisco Gil
Mike Engel
Arturo Buzarra
Hector Bujanda
Hector Palacios