Print the HW and FW versions for the I/O Expander in the CC6UL SBC platform.
https://jira.digi.com/browse/DEL-3958
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
- The IVT table address inside the kernel image must be aligned at 0x1000
bytes. The calculation of this offset was not working when the kernel image
size was multiple of 0x1000 bytes. In this case the IVT table was moved an
extra offset of 0x1000 bytes, causing U-Boot to fail to validate the image
as the IVT table was not in the expected location.
This fix uses the same offset calculation algorithm as U-Boot, ensuring both,
the sign script and U-Boot will look for the IVT at the same address.
https://jira.digi.com/browse/DEL-3972
Signed-off-by: David Escalona <david.escalona@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the volume is not found, the partition cannot be wiped since it is attached.
Remove 'update' UBI device in:
* mdev automount script if volume is not found
* recovery init script before formatting 'update' partition
https://jira.digi.com/browse/DEL-3962
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This allows to override the console using the local.conf.
https://jira.digi.com/browse/DEL-2856
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
ICU support was not included in the rootfs in previous DEY versions
but it's included now through runtime dependences of 'harfbuzz' and
'libical'.
The support is not strictly needed, as ICU is a library for Unicode
support for applications:
http://site.icu-project.org/home
This commit disables ICU support directly for 'harfbuzz' and adds a
patch for 'libical' that allows to disable it. Notice that it's only
disabled for the CC6UL, as the CC6 has no rootfs space problems.
Only the 'libicudata' library is 25MB:
25M /usr/lib/libicudata.so.57.1
https://jira.digi.com/browse/DEL-3854
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The unlock retries feature from the Telit plugin does not work properly with
old versions of the Telit HE910 firmware. This has been fixed in upstream
commit: fbb607f0c25be3a4bb8692ee48445cf437345b6c
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
https://jira.digi.com/browse/DEL-3863
This reverts commit 3123085e72.
we revert this commit because the patch was already applied on mm-1.6.4
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
This commit adds mdev support into the recovery ramdisk to
mount/unmount storage devices for the firmware up tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3692
The main purpose is to improve our kits usability. This way users do not need
to follow the steps in the documentation to change from static to DHCP IPs.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
udhcpc's '-n' option means 'Exit if lease is not obtained'.
We want to keep udhcp client alive if lease is not obtained, so when it is
possible, an IP is assigned.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
udhcpc options added to 'network/interfaces':
* '-S' to log to syslog too.
* Redirect the output to '/dev/null' not to show messages of the tool running
in background (for example when executing 'ifup').
* '&' to send the udhcp client to background.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The amount of patches to this driver maintained in meta-digi is
substantial, so we are moving to a git repository release model.
https://jira.digi.com/browse/DEL-3710
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewing the patches while updating the QCA firmware to a new release,
I encountered this patch. On the original PR it says:
"Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this save us from some syncronism problems if we are not
using HW flow control."
Current spins of the module already use hw flow control. Also, not allowing
hciattach to override the baudrate does not seem right to me. It would be
enough with passing a 3M baudrate to hciattach to match the firmware
default.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit fixes an issue with ModemManager to return the correct
error code when an invalid QMI command is send to the modem.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3748
This commit fixes an issue with the Quectel EC21/EC25 due to a wrong
reported DMS version which will cause ModemManager not to read the
SIM card.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3748
Implement:
* support to start, stop and restart interface
* states machine and retries system to recover from command failures
* overall simplification and code clean-up
https://jira.digi.com/browse/DEL-3858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- Trying to set the complete SWU packages signature key in the
TrustFence class was causing a build error when keys were not
yet generated. To avoid this, set only the key wildcard in the
TrustFence class and expand the variable in the SWU packages
recipes, when keys already exist.
https://jira.digi.com/browse/DEL-3913
Signed-off-by: David Escalona <david.escalona@digi.com>
- Instead of trying to generate the TrustFence keys in this recipe
when they are not present, depend on the 'virtual/kernel' to
ensure they are already generated. This solves a concurrency problem
when two recipes try to generate TrustFence keys at the same time.
https://jira.digi.com/browse/DEL-3913
Signed-off-by: David Escalona <david.escalona@digi.com>
Allowing to boot a non-encrypted rootfs when encryption is enable is a security
hole: if an attacker can somehow write (offline) to the media, he could flash a
custom unencrypted rootfs and break into the system.
If the system is configured to use encryption, only encrypted rootfs will boot.
Trying to boot a non-encrypted rootfs will fail and power off the device.
https://jira.digi.com/browse/DEL-3829
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The recovery ramdisk already contains functionality for encrypted rootfs
installation. The goal is to centralize all this functionality in the recovery
ramdisk.
https://jira.digi.com/browse/DEL-3829
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
- Instead of using a different boot script when booting from linux
and from recovery, merge them into one script that checks the
boot source.
https://jira.digi.com/browse/DEL-3836
Signed-off-by: David Escalona <david.escalona@digi.com>
For CC6UL, when setting a new key, an "enc" flag must be added to the rootfs in
the "mtdparts" U-Boot variable.
After that a reboot is needed, so the recovery command must be modified to
remove the encryption key and proceed with the rest of commands in the next
boot.
When updating the firmware, a format of the rootfs partition is always
performed, independently if a new encryption key has just been configured.
In case only the encryption key is being configured, we also need to reboot to
format the rootfs properly.
https://jira.digi.com/browse/DEL-3685
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
For CC6UL, when not using rootfs encryption, the "enc" flag must be removed from
the "mtdparts" U-Boot variable.
https://jira.digi.com/browse/DEL-3685
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Software update recipes ('core-image-base-swu' and 'dey-image-qt-swu') are able
to set default or customized values for:
* In the CC6, the proper path for:
* linux partition (default to '/dev/mmcblk0p1')
* rootfs partition (default to '/dev/mmcblk0p3' if no encrypted, always
'/dev/mapper/cryptroot' otherwise)
* In the CC6UL, the proper volume name for
* linux partition (default to 'linux')
* rootfs partition (default to 'rootfs')
https://jira.digi.com/browse/DEL-3666https://jira.digi.com/browse/DEL-3686
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Alex Gonzalez
Diaz de Grenu, Jose
Tatiana Leon
Sebastian Pastor
David Escalona
Javier Viguera
Salvador Penalva
Mike Engel