Currently, the patch is identical for all ccimx9 platforms, so move it
to a generic override folder to be used also for ccimx95.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the Ethernet entries to prevent ModemManager from trying to
manage it:
ModemManager[177]: <info> [base-manager] couldn't check support for device
'/sys/devices/platform/soc/5800a000.eth1': not supported by any plugin
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some recipes were forcibly removing conflicting packages.
This does not allow to add those packages back for users that
want to use meta-digi layer, but a different distro than 'dey'.
With the 'dey' distro override, such removals are only done
if using this distro.
Reported-by: Michael Burr <michael.burr@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7712
Serial support to XBee cellular devices is deprecated since
the recommended communication protocol is USB, so we remove
the udev rules that supported these devices.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some modems take a lot of time to initialize and ModemManager won't
see them on its first scan.
This service will force a rescan 40 seconds after boot, to give
enough time for those lazy modems.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
On the default device tree, the MCA UART that's connected to the
XBee socket is enabled. This registers as ttyMCA0.
Add a udev rule for this path so that ModemManager checks for
modems in this serial port.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
Remove git recipe to use the official 1.8.2 release and update
udev rules file to blacklist the network interfaces that ModemManager
must not manage.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
CC8X SBC Pro's LPUART0 port is routed to the Expansion connector.
The UART located in the XBee socket, MCA UART, is not currently supported
so comment the XBee Cellular rule for the moment.
https://jira.digi.com/browse/DEL-6417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The XBee Cellular modem is expected to be at ttymxc1 on CC6UL and
at ttymxc4 on CC6. The changes are needed because in v4.9.11 kernel
the /sys/devices entry for CC6UL and CC6 are the same for the TTYs,
causing that on CC6UL ModemManager was also searching for modems on
ttymxc4.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5163
The cellular interface is now managed by NetworkManager, so there is no
need for this custom script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
After 0e7f5d3a47 both platforms probe both ports,
which is problematic (for example, ttymxc4 is the console in the 6UL based
platforms).
Use more concrete rules to avoid that problem.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
After the kernel update (v3.14 to v4.1) the sysfs path changed from:
/devices/soc0/soc.0/2100000.aips-bus/21f4000.serial/tty/ttymxc4
to:
/devices/soc0/soc/2100000.aips-bus/21f4000.serial/tty/ttymxc4
which caused the XBee Cellular not to be detected on the new kernel. These more
general rules are compatible with both kernels.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
QMI modems didn't work with the version of
modemmanager that the dey-2.2-r1 release was
using.
We were using two patches for uBlox plugin to use XBee Cellular 3G
that are now merged in modemmanager master.
This updates modemmanager to use the commit where QMI
problem was fixed and also include uBlox patches.
https://jira.digi.com/browse/DEL-4192
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Add patch to MM, so it detects the U-Blox modem connected to the XBee
socket.
https://jira.digi.com/browse/DEL-4084
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee Cellular needs more time to settle down before MM is able to
detect it on boot. As this is connected to one of the 'ttymxc' serial
ports, use that port to conditionally delay the launch of MM.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding more retries to the port AT probing has an impact in modems not
using serial drivers (for example using qmi, mbim). It takes longer for
MM to detect those modems and then user space gives up waiting for the
modems to be available.
This reverts commit 682d77e414.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Launching the MM on target's boot fails to detect the XBee cellular
because this needs more time to complete the initialization. So add some
more retries for the AT port probing to allow the XBee cellular to be
detected.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of redirecting the MM logging to '/dev/null' use a file, so we
can see what's going on in case of failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The flow control patches have been merged to the master branch, so
update the revision to remove those patches from our layer.
This reverts commit a7c51af5b8.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee cellular support is at the moment only in modemmanager's git
repository (master branch).
Also remove one Telit patch from the bbappend because it's already
included in the git repo.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The unlock retries feature from the Telit plugin does not work properly with
old versions of the Telit HE910 firmware. This has been fixed in upstream
commit: fbb607f0c25be3a4bb8692ee48445cf437345b6c
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
https://jira.digi.com/browse/DEL-3863
This reverts commit 3123085e72.
we revert this commit because the patch was already applied on mm-1.6.4
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Javier Viguera
Francisco Gil
Gabriel Valcazar
Arturo Buzarra
Mike Engel
Isaac Hermida
Hector Palacios
Gonzalo Ruiz
Jose Diaz de Grenu
Sebastian Pastor
Salvador Penalva
Tatiana Leon