Remove obsolete SD card image creation logic and related variables. We
will use WIC images for bootable SD cards.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notice that we need to create u-boot and imx-boot symlinks in the deploy
directory, as they are required for the bootloader of the wic images.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Different platforms use different Cortex-M processors, so instead of
using the M4_DEFAULT_IMAGE_MX95 (as meta-imx does) for an M7 processor,
generalize to the CORTEXM_DEFAULT_IMAGE variable name. Also, move it
to the imx-boot recipe (where it is used) and deploy that image to
the imx-boot-tools directory, so the imx-boot image can be regenerated
externally (without yocto).
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove IMAGE_BOOT_FILES and related WKS dependencies from ccimx93-dvk and
ccimx95-dvk machine configs. IMAGE_BOOT_FILES defines the files included
in the boot partition when creating WIC images. The removed files are
the Cortex-M demo firmware that we don't want on the boot partition of
our WIC image.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the secure boot support for STM platforms based on the
STM32 MPU Ecosystem v6.1.0. It introduces support for encrypted boot artifacts,
including TF-A and FIP, and enables this functionality for the ConnectCore MP2
platform.
This enhancement allows secure boot deployments with both authentication and
encryption for improved protection of critical boot components.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit disables the signing and encryption mechanism for the ConnectCore
MP2 platform's co-processor firmware. Currently, this functionality is not yet
supported in DEY, and enabling it causes build failures when TrustFence support
is active. Disabling it ensures successful builds until full support is
implemented.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add the ccimx95 platform cloned from mx95lp5. Provide DDR configuration,
configure the console on lpuart6, and update ccimx95-dvk.conf to select
the new board.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the LPDDR4 firmware list from the shared ccimx9 include into the
machine configurations for the ccimx91/93 DVK, allowing the upcoming
ccimx95 to utilize its own distinct values.
Also, remove the redundant IMXBOOT_TARGETS and BOOTLOADER_SEEK_USERDATA
overrides in ccimx91-dvk, as they are duplicated.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the CC6 and CC6QP platform configurations to use the latest
NXP BSP based on U-Boot v2024.04, unifying support across all NXP-based
platforms.
https://onedigi.atlassian.net/browse/DEL-9758
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the CC6 and CC6QP platform configurations to use the latest
NXP BSP based on Linux kernel v6.6, unifying support across all NXP-based
platforms.
https://onedigi.atlassian.net/browse/DEL-9758
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
With the updated firmware-ele-imx recipe, the installation logic now
requires SECOEXT_FIRMWARE_NAME to be empty when no extra firmware is
to be installed.
https://onedigi.atlassian.net/browse/DEL-9748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the Digi custom .bbappend recipes for FIP and TF-A to align
with the latest ST BSP release, based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.06.11
tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
As the OmniVision OV5640 camera is now deprecated and no longer supported by
most vendors, this commit moves its support to a separate Device Tree overlay,
allowing it to be used if needed.
Instead, the Sony IMX335 MIPI camera is integrated into the default device
tree as the default supported camera for the CCMP25-DVK platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Move the address where the fitImage is loaded after the addresses
where the binaries in it are decompressed. This way, the fitImage
can grow without size restrictions.
The memory map now looks like this:
0xC0000000 Start of memory
|
| (32 MiB)
v
0xC2000000 Kernel loadaddr ($loadaddr)
|
| (32 MiB)
v
0xC4000000 DTB/DTBO load address ($fdt_addr)
| (4 MiB)
v
0xC4400000 Init ram disk ($initrd_addr)
|
|
| (64 MiB)
|
v
0xC8400000 ZIP/fitImage address ($fit_addr_r)
|
~
|
v
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
IMAGE_FSTYPES was declared on each platform config file, but it has the
same values for all platforms depending on the storage media (mmc or mtd)
and whether read-only is enabled.
Move the conditional weak assignment to digi-default.inc and remove it from
each platform config.
In the case of STM platforms, since IMAGE_FSTYPES is weak-assigned by STM
layer, we still need to append/remove from it inside the platform config,
but move it to the family includes, rather than declaring it on each
specific platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The generation of the sdcard image takes time and resources, and
it's not involved in the Get Started.
This can be easily re-enabled by appending the variable in the
project local.conf.
Append the variable in the build scripts, to facilitate its usage
on release builds.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The HCI_UART Bluetooth driver does not support suspend-to-RAM operation, so the
driver must be loaded and unloaded manually. This commit adds support for the
Bluetooth initialization script used across Digi platforms, specifically for
ConnectCore MP13 and MP15.
https://onedigi.atlassian.net/browse/DEL-9650
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The USB and SD installers are U-Boot scripts that are practically
identical.
Merge them into a single template with a couple of machine variables that
determine the default device index in U-Boot for the USB or the microSD
card.
Do dynamic substitutions to create the two installers out of the template.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Fixes commit b143804dbb, since in nativesdk
context MACHINE_FEATURES is reset to SDK_MACHINE_FEATURES, causing OP-TEE
building tools to be missing from the generated SDK.
https://onedigi.atlassian.net/browse/DEL-9663
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the memory layout to properly allocate space for the
different FIT image components, while ensuring total memory usage stays below
128 MiB. This avoids overlaps and ensures correct loading on memory-constrained
variants.
Final memory map:
Start of memory: # 0xC0000000
# |
# | 32 MiB reserved
# v
FIT image load address: # 0xC2000000
# |
# | 32 MiB for FIT image
# v
Kernel load address: # 0xC4000000
# |
# | 32 MiB for Kernel
# v
DTB/DTBO load address: # 0xC6000000
# |
# | Size for DTB/DTBO
# v
Total memory mapped: 96 MiB
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In theory, we already had the necessary changes to remove these images, but
two things needed tweaking:
* MULTIUBI_BUILD values use underscores instead of hyphens, so use
underscores to properly remove the default value inherited from
BOOTDEVICE_LABELS.
* STM used to incorporate a custom "stmultiubi" image type in the stm32mp
builds, but they've replaced this with the upstream "multiubi" type.
Reflect this change to avoid generating additional UBI/UBIFS images in
our builds.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This overlay contains a workaround to make the USB-OTG
work as USB device when connected to a host.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9610
(cherry picked from commit ec92f5fdd10a61e37ac3778d0d3aa1816bc6b0aa)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
STM's st-machine-common-stm32mp.inc file automatically incorporates "optee" to
MACHINE_FEATURES as long as BOOTSCHEME_LABELS contains "optee". Since we
recently modified the ccmp15's labels to only contain "opteemin", this is no
longer the case, which leads to:
* optee packages (optee-client, optee-os) not getting installed in images and
SDKs
* optee patches for environment encryption not being applied to libubootenv
Add the feature manually to fix these two issues
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 9c3916da94 added INSANE_SKIP
"32bit-time" to certain recipes that use 32bit APIs on the ccmp1
SOMs, but forgot to include the `pn-` prefix to really apply to
those recipes.
While on it, add two additional ones on recipes used by NXP 32-bit
platforms.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
That includes several CVE patches not present of meta-freescale's
23.2.5.imx recipe (which is based in exactly the same revision).
Similar change was done in NXP's meta-imx (see commit
99ceb057fcfdc8151c1488089d5f22363dfdb6d7).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In Yocto 5.0, the boot artifacts for CCMP1 platforms are compiled using the
opteemin flavor. This commit updates the BOOTABLE_ARTIFACTS definition to
reflect that change and properly integrate the boot artifacts into the ZIP
installer.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The binaries of certain recipes use 32-bit APIs (ioctl, stat) that produce
build warnings. Add INSANE_SKIP to prevent the warnings.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
ALSA_LIST variable is weakly set through an override (stm32mp1common or
stm32mp2common). When the override is in place, the hard assignment of
the plain variable is not enough, and the value weakly set in
meta-st-stm32mp layer takes precedence over the plain variable hard
assignment.
Clear the variable with the override and move it from machine config files
to the include file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Move BOOTSCHEME_LABELS from common include to platform config
Default to:
- 'opteemin' for ccmp15
- 'optee' for ccmp13
This doesn't change the behavior present in DEY-4.0, where OPTEE in ccmp15
was minimal and running on non-secure DDR.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This override sets other variables, such as STM32MP_SOC_NAME which is used
on the build of the FIP image.
It also makes ST layer append a new UBOOT_CONFIG (default_stm32mp15/13)
that we must remove.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit removes kernel headers from the SDK package list to
prevent overwriting the default ones, as there are currently no
ST-specific headers required.
Reference: ebadb27d60
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Javier Viguera
Arturo Buzarra
Mike Engel
Hector Palacios
Gabriel Valcazar