There are several U-Boot binaries, depending on RAM size, at the moment:
- u-boot.bin-ccimx8x_sbc_pro512MB
- u-boot.bin-ccimx8x_sbc_pro1GB
- u-boot.bin-ccimx8x_sbc_pro2GB
and several SCFW files, depending on frequency, size, bus width, at the
moment:
- scfw_tcm.bin-1.2GHz_512B_16bit
- scfw_tcm.bin-1.2GHz_1GB_16bit
- scfw_tcm.bin-1.2GHz_1GB_32bit
- scfw_tcm.bin-1.2GHz_2GB_32bit
From these, we need to combine those that match the RAM size, to produce
bootable images for the different variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the arrival of DualX variants, the device tree files have been renamed
to contain the SOC type (8qxp, or 8dx). This is determined by a new U-Boot
variable 'soc_type'.
Default to "8qxp" if the variable is not defined (old U-Boots).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the arrival of DualX variants, the devicetree files have changed
their names to include the soc type (qxp, dx).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
Even though our ccimx6 and ccimx6qp images were using Linux v4.9 sources
correctly, they were using the same recipe as our images with Linux v4.14.
Technically, both recipes are identical (save for the branch name), but each
Linux version should have its own recipe.
Also, make sure that ccimx6/ccimx6qp images are built with our version of the
linux-imx-headers recipe instead of the one in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We want to run the script if the 'wireless' node exits on the device tree.
This is to facilitate disabling of the wireless by removing that node.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6616
This recipe was updated in NXP's 4.14.98-2.0.1 patch release.
https://jira.digi.com/browse/DEL-6618
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The 'do_install()' call was doing a 'cd' command to later do symlinks
more straight forward.
This 'cd' however may affect further 'do_install' appends, that expect to
be working on the ${WORKDIR}.
Remove the 'cd' command and instead supply the correct paths to the 'ln'
commands.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 54bd1e47ad024515b737aea106dc4fca374c0fb8)
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists use it to select the U-Boot file to use during
firmware update. If not, fall back to old method of using the
variant code and the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists calculate new HWID fields to check if the SOM has
Wi-Fi, Bluetooth, etc. in order to select the device tree file.
If not, fall back to old method of using the variant code and
the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
P2P disabled is the default in the kernel module, so passing here the
parameter to 'modprobe' does nothing but prevents to set the parameter
in the kernel command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
P2P disabled is the default in the kernel module, so passing here the
parameter to 'modprobe' does nothing but prevents to set the parameter
in the kernel command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new development branch is based on NXP's v4.14.98 BSP.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga
for the imx8qxp.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe's package is meant for packages that require NXP-specific linux
headers.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
When using v1.5, we used a .bbappend to change the revision of the v1.5 recipe
in meta-freescale. Since we're upgrading to a version that isn't supported in
the other layers yet, remove the .bbappend and add the entire v2.0 recipe.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update NXP's .bbclass files with the ones in meta-fsl-bsp-release branch
sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These dependencies went missing when we deleted our first .bb file and replaced
it with a .bbappend. Without these dependencies, the build can sometimes fail.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Removing the flag breaks the build of the freetype package and possibly others.
Leave the flag as it is for now.
This reverts commit e4cbeafa1c.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This option configures gcc to use PIE by default, which is good from a security
standpoint. However, the files necessary to compile applications statically
with PIE support are missing from glibc, causing builds to fail. Said files
were removed on purpose in poky commit 472c86127ab57759588e5ec53c75ebb52667f094
because static PIE binaries apparently don't work very well when using gcc 7.x.
Instead of enabling static PIE support for glibc and risking runtime failures,
revert to our old situation and remove default PIE suport for gcc.
https://jira.digi.com/browse/DEL-6558
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variant is exactly the same as variant 0x02, but with a new revision
of the i.MX6UL silicon.
https://jira.digi.com/browse/DEL-6555
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe adds a script and a related systemd service that
configures two GPIOs (user defined, or else platform-defaults) as
output and sets them to the appropriate value for initializing the
XBee socket:
- XBEE_SLEEP_RQ: is set low, for running the XBee
- XBEE_RESET_N: is set low and then high, to reset the XBee
The service triggers on the condition that the UART TTY device node
pointed to by variable XBEE_UART exists.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
In the update to thud, the recipe for this package was updated in
meta-freescale with a newer revision that, among other things, breaks
compatibility with the parameters we use to recover closed devices via USB.
Even if we change these parameters to obtain a configuration equivalent to the
one we've always had, closed devices still won't boot because the internal
logic of the tool has changed a lot.
Instead of patching the tool for this very specific use-case, revert to the
version we've been using in DEY 2.2 and 2.4.
https://jira.digi.com/browse/DEL-6520
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the linux-v4.20 recipe and use the linux-fslc kernel recipe in
meta-freescale-3rdparty instead.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Update following firmware binaries to tag r10005.1 from
qca6574au-le-2-2-1_qca_oem repo at meta_build/firmware/sdio/
in order to support fast roaming (802.11r) for the qca6564
wireless chip:
e018e7b629b055dc4616c7e88c615b41 otp30.bin
8b638fdaf21f089940d98db518323767 qwlan30.bin
d6ece5037e595000770fbbb6015c0461 utf30.bin
https://jira.digi.com/browse/DEL-6496
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update u-boot-fw-utils patches to apply on current upstream version. Remove
recipe for version 2017.09 since both U-Boot v2017.03 and v2018.03 work fine
with the newer version.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version is only required to build U-Boot 2017.X, so select it as preferred
version only on those platforms that build this U-Boot (CC6 and CC6UL).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Most of the support has been added to the meta-freescale layer, so
substitute our recipe for a .bbappend and redefine the tasks to build
U-Boot images for our two variants (1GB and 2GB).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Every task in this recipe is already supported in the same way in the
meta-freescale layer, so just keep the .bbappend file to select SRCBRANCH and
SRCREV.
The DDR patch can be removed since that source code is now included into the
SCFW project.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds support for U-Boot v2018.03 for CC8X platforms only.
Create 'digi-u-boot.inc' with the common definitions for both v2017.03
and v2018.03.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Collects following changes:
- fix compatible string parsing: Only first compatible string
was being parsed from "/proc/device-tree/compatible"
while looking the device the application is running on.
https://jira.digi.com/browse/DEL-6436
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Add kernel module parameter to enable/disable the p2p interface.
By default p2p interface is disabled.
https://jira.digi.com/browse/DEL-6503
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The naming of branches in the qcacld repository is now in the qca65x4
namespace.
Also, the qca6564/master branch now does not hardcode the TX MCS to 0 as
this change should only apply to the CC6UL and not other platforms like
the CC6+.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Update file:
- fakeboar.bin (f9f8dc905be5732525e0c9e8db7822f3)
This file was generated by calibrating several CC8X SBC Pro boards and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10005.1 on
qca6574au-le-2-2-1_qca_oem repo.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Device tree files no longer have the kernel type prefixed to their name, so the
trustfence_sign() function must be updated to reflect this change or else
errors will occur.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This version supports OpenSSL v1.1.0 by default, which is used in DEY 2.6.
Trying to build older versions of the package will result in failures, so
remove support for said versions entirely.
Our patches apply cleanly except for the hab4_pki_tree.sh automation patch,
which needs a small tweak so it can get applied over the latest version of the
script.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The driver now builds directly from the kernel source and the
fixes are already included in the kernel tree so there is no need
to build the module externally.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6460
(cherry picked from commit a0990a7e1dcd03af239efb620b83b7dee126484e)
In Yocto 2.6, this variable is null whenever systemd is enabled. Explicitly set
this variable to keep some necessary scripts in /etc/init.d.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, remove sysvinit and add pam, which is needed by weston+systemd.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Fix write operation by moving the re-lock of the mmc partition
after performing the system synchronization, if not the mmc
driver throws read-only errors. Also, improved the code
to avoid compilation warnings because the return values were
not managed in write operations.
https://jira.digi.com/browse/DEL-6449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bitbake was using the imx-atf recipe inside of meta-freescale instead of ours.
Said recipe was compiling a different tag, causing our kernel to stop loading
when using our generated imx-boot images.
Remove our .bb file and add a .bbappend that changes the source code revision
to the tag compatible with the rest of the imx-boot files.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree file names won't have the kernel image type like a
prefix anymore, since thud uses the original file names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Device tree names don't use KERNEL_IMAGETYPE as a prefix anymore,
since in this version, there are different variable names to generate
device tree files.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
KERNEL_IMAGE_BASE_NAME was replaced by KERNEL_IMAGE_NAME for
consistency between variable names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
cryptoauth-openssl-engine is not compatible with OpenSSL v1.1.x, until
it will be supported, we disable it.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The SDMA firmware does no longer live inside the kernel tree.
It must now be installed on the rootfs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6420
This is a new intermediate file that will be reused in every iteration if it's
not removed, causing all imx-boot images to have the same U-Boot binary.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Even though these demos aren't essential, they're needed for the imx-boot
build, and the demos' file names have changes from one version to another,
causing build errors. By updating the recipe, the errors no longer happen.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
new version allows building multiple flavors of the kernel and
module packages by templatizing kernel package names via a new
KERNEL_PACKAGE_NAME variable in kernel.bbclass.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In 92c49b9b1a16dfd35444db8143bd4cae4cda70cc was introduced the LAYERSERIES_CORENAMES
and LAYERSERIES_COMPAT_<layername> with the intention of allowing layers
to indicate which versions of the core project they're compatible with.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Up to now, the ConnectCore 8X was using the Bluetooth firmware
files from model QCA6564 r110059.1.
This commit adds the firmware files from repo 'qca6574au-le-2-2-1_qca_oem'
at tag r10005.1:
nvm_tlv_3.2.bin: 3de46ea023570b86cabb9502b92a1fed
based on MD5SUM a97cdfe80e8109cf3574f74cd3c73fc7 but changed
byte 0x36 (decimal 54) to 0x02 (IBS)
rampatch_tlv_3.2.tlv: e8cdb0260615e02bd21c3b3fcaf832eb
The recipe has changed to use the variable QCA_MODEL and each firmware
has moved to a folder of its own.
While on it, remove old Bluetooth firmware files 3.0 which were
not used.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6218
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without these symlinks, U-Boot images will be left out of the installer .zip
file. Unlike the v2015.04 recipe, the default symlinks aren't removed, because
they're needed in the imx-boot recipe for the ccimx8x.
https://jira.digi.com/browse/DEL-6333
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is only a cosmetic change to break away from NXP's versioning and use our
own from now on.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Hector Palacios
Gabriel Valcazar
Javier Viguera
Arturo Buzarra
Alex Gonzalez
Francisco Gil
Gonzalo Ruiz
Hector Bujanda
Mike Engel