Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new fw-4.bin (v3.4.0.236) with md5sum e2fc33daba2c35fe2c4f62492a44f8b6
was used to pass RED (Radio Equipment Directive) certification on the CC6
module.
https://jira.digi.com/browse/DEL-4512
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
A mechanism was introduced in U-Boot to dynamically locate the environment
copies within a NAND partition, skipping bad blocks and making full use of
the partition blocks.
To trigger this mechanism in Linux tools (fw_printenv/fw_setenv) the
configuration file /etc/fw_env.config must have both copies entries
pointing to the same offset.
This commit substitutes the hardcoded configuration file for CC6UL with a
stub and generates one on an RPM post-script basing on:
- Supplied DEY variables (with default values per platform):
- UBOOT_ENV_OFFSET: starting offset of the environment within the
partition.
- UBOOT_ENV_SIZE: size of each copy of the environment.
- UBOOT_ENV_RANGE: size in the partition that the environment copies may
occupy, starting from UBOOT_ENV_OFFSET. If undefined, the whole
partition is used.
- Calculated values:
- NAND Erase block size
- Number of blocks available for the environment copies
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4256
This is a Consumer dual-core 1GHz, 4GB eMMC, 1GB DDR3, 0/+70C variant
without bluetooth, no wireless, no kinetis.
https://jira.digi.com/browse/DEL-4280
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Instead of using a different boot script when booting from linux
and from recovery, merge them into one script that checks the
boot source.
https://jira.digi.com/browse/DEL-3836
Signed-off-by: David Escalona <david.escalona@digi.com>
Patches added in 'meta-swupdate' (backported from U-Boot) broke our
layer. We also had those patches, so remove them and make sure the
rest or our patches are applied after the ones from 'meta-swupdate'
by using an anonymous python function instead of appending to the
SRC_URI variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new calibration settings
updated with the latest certification results.
md5sums:
bdwlan30_US.bin: f2c414adb682a8cd95e72593fad7fa08
bdwlan30_World.bin: 12e2bae1a871e2a3dfa6ded0ee675c09
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Refresh the patches with GIT so they apply cleanly using "git am".
Otherwise they fail with:
Applying: openssl_helper: use /dev/urandom as seed source
error: corrupt patch at line 16
Patch failed at 0003 openssl_helper: use /dev/urandom as seed source
Applying: hab4_pki_tree.sh: usa a random password for the default PKI generation
warning: keys/hab4_pki_tree.sh has type 100755, expected 100644
Notice that they were not failing in Yocto, as it does not use "git am"
to apply patches, but it's better to have the patches correctly done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On a CC6, the 'env default -a' command deletes the 'soc_family' variable
that is used on the U-Boot boot scripts to configure the name of the
device tree file to load.
Then if we try to boot into recovery directly (without a reset) because
the variable is not available, it fails to compose the correct name for
the fdt, and gives the error:
reading uImage--ccimx6sbc-id129.dtb
** Unable to read file uImage--ccimx6sbc-id129.dtb **
Force a reset, so the 'soc_family' variable is available again and the
correct fdt_file is loaded.
While on it, add some blank lines to the 'recovery reboot' message, so
it's easier to read.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The caam encryption check was only done from fw_env_write and fw_env_read
functions, which are not called when using the functions exported as a library.
Move the check_caam_encryption() call to fw_env_open(), which is called from
all code paths. A similar check for AES encryption cannot be moved because it
requires the AES key as an argument.
https://jira.digi.com/browse/DEL-3616
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NAND partitions may have pre-existing UBI volume information
and that will tell U-Boot to use 'ubiwrite' to keep UBI wear
leveling information instead of erasing the NAND partition
beforehand. Given that the UBI support in U-Boot is not
particularly complete and stable, and specially if the NAND
partition table has been changed, this could result into
problems during the UBI volume initialization or during the
update process. To prevent such problems it is better that
the NAND partitions are erased.
This loses the UBI wear leveling information but provides
a more reliable deployment install script.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-718
Modify patch to clean compiler warning:
warning: passing argument 1 of 'sysfs_mmcboot_set_protection' discards
'const' qualifier from pointer target type
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Even though this variable is documented as unused, removing it fails
wireless regression tests.
https://jira.digi.com/browse/DEL-3501
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The following document,
JQCA61x4, QCA65x4, and QCA937x
Configuration Parameters Specification
80-Y7674-11 Rev. J
September 30, 2016
Contains a list of unused configuration arguments in page 29. This commit
removes those listed arguments that appeared on the default configuration
file to avoid confusion.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Implements functions to get and set variables from U-Boot's environment.
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These have been provided by the embedded hardware team and they are to
be used for certification testing. The calibration corresponds to the
internal antenna on the module. If using the current external antenna on the
CC6UL SBC they work fine, although they could be tweaked to improve.
The BDF files provided were generated from the original ones, by running a
test tree for output power calibration for QCA6564A-3 chip. This test
tree is called
‘FCCSP_Rome3.x_WLAN_CLPC_cal_and_WLAN_BT_Verify_Y8611-H341.xtt’ and it
belongs to the Qualcomm Design Package ‘DP25-WL420-100’.
The test tree is to be run in the QSPR software tool, part of the QDART
software tools set provided by Qualcomm.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
As discovered during certifications preparation work, calibration changes
applied only on the bdwlan30.bin file do not take effect.
Per QCA guidelines, the bdwlan30.bin and utfbd30.bin files should be the
same for the calibration changes to work.
This commit removes the current utfbd30.bin file, with an md5sum that
matches the original bdwlan30.bin file in QCA's chipcode
qca6564-le-1-0-3_qca_device repository, and creates a symbolic link to the
actual bdwlan30.bin board file used to certify Digi's module internal
antenna.
https://jira.digi.com/browse/DEL-3454
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The codec MAX98088 present on the ccimx6ulsbc only needs one
configuration file that can play and record.
The default file enables the interfaces present on the ccimx6ulsbc:
- Headphones
- Speaker
- LineOut (in stereo mode)
- LineIN-A
- MIC2
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2352
The patch with the same name in 'meta-swupdate' fails to apply cleanly
after the patches we have done in meta-digi. So add here a version of
the patch that applies cleanly and with higher precedence in the search
path (using 'dey' distro override).
https://jira.digi.com/browse/DEL-3355
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
A corner case requires to save the environment so that the
boot command works after reset.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-681
Also change the image type of dey-image-trustfence-initramfs.
https://jira.digi.com/browse/DUB-615
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The default DEY image recipe for ccimx6ulsbc builds dey-image-qt.
The graphical backend is determined dynamically.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise they are overridden with config files from other layers (for
example meta-fsl-arm) that may not be valid for our platforms.
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set of the World country code in the BDF file. It was lost after syncing to the
latest QCA BDF files (commit b80f00f14a).
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This patch adds the functionality to automatically detect if the enviroment
is encrypted (through the device tree). If it is, the environment is encrypted
and decrypted as required in a transparent way for the user.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
https://jira.digi.com/browse/DEL-2925
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the warning message shows the TF variable setting in the correct
syntax that they should be written in the project's local.conf
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is native only, this patch ensures it can only be built
natively and fix the following problems:
* Add openssl-native rather than openssl to the dependencies.
* Use the $(CC) $(LDFLAGS) and $(CFLAGS) that Yocto provides to avoid a
compilation error.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
We are including two firmware files: one for setting the country to US and the
other one to set it to the World Wide Roaming region (SKU 0060).
https://jira.digi.com/browse/DEL-2774
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The correct U-Boot branch to be used with dey-2.0/master is v2015.04/master, as
it contains the latest development changes (just like dey-2.0/master).
This reverts commit 728619a5bc.
After commit b0a766eafc8 in the U-Boot repository, both signed and
encrypted images will be generated. Copy both of them to the deploy folder
https://jira.digi.com/browse/DUB-642
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This allows to automatically create a secure PKI tree without user
interaction.
https://jira.digi.com/browse/DUB-618
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NXP Code signing Tool for the High Assurance Boot library is needed for
signing and encrypting different artifacts (U-Boot image, uImage, ...).
As the CST cannot be included in DEY, the user needs to download the
tarball and add it to the recipe folder.
https://jira.digi.com/browse/DUB-618
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
U-Boot environment on the CC6UL NAND is located at partition /dev/mtd1:
- original copy is located at offset 0 in the partition
- redundant copy is located 1 erase block (128K) after the original copy
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2552
At the moment there is no support for rootfs encryption for the CC6UL,
so there is not a ramdisk in the boot image. But with the initial
addition of TF support, the u-boot boot script was being on-the-fly
updated for TF regardless of the platform, making the CC6UL unable to
boot when TF was enabled.
This commit fixes the problem, by just changing the u-boot boot script
when TF is enabled only for the CC6.
https://jira.digi.com/browse/DEL-2754
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
This change should be only temporary until it gets upstream.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
When Trustfence is enabled, this adds a dependence on the TF initramfs,
so it's built and added to the boot image.
It also modifies the u-boot boot script on the fly, to boot correctly
using the Trustfence initramfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
The u-boot-dey recipe is now fully shared by ccimx6 and ccimx6ul platforms
so we can remove the platform-specific appends.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The setting of 'bootcmd' in the script was done using single quotes, which
doesn't expand variables. As a consequence the following variables must
be defined again (during the execution of the second part of the script):
- mmcdev
- INSTALL_LINUX_FILENAME
- INSTALL_ROOTFS_FILENAME
This patch changes the single quotes with double quotes, so that these
variables are expanded during the setting of 'bootcmd' with the values
assigned at the begining of the installation script (notice these are
not dynamically generated so there is no risk to expand them).
At the same time we need to escape with a backslash:
- double quotes containing strings
- variables that we don't want to expand (like the return value $?)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add semi-colons to instructions inside 'setenv' commands
- Remove semi-colons in instructions where they are not needed (for
consistency with the rest of instructions)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicetily disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
https://jira.digi.com/browse/DEL-2603
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Implement the set of TRUSTFENCE_ macros to configure each secure boot feature
available in U-Boot.
https://jira.digi.com/browse/DUB-570
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Adding some early initial support as a copy of ccimx6 files.
https://jira.digi.com/browse/DEL-2529
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
COMPATIBLE_MACHINE is a regular expression, so we need to update the current
pattern for ccimx6 due to it will also match with ccimx6ul.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Old versions of u-boot 'v2013.0x' have a bug in the shell's test command
that makes structures like:
if test "${not-existing}" = "0x01"; then ...
if test -z "${not-existing}"; then ...
to fail when the checked variable does not exist.
So implement workarounds in the updater script to overcome this problem.
This is needed because the script may be used in modules with an old
pre-installed u-boot.
https://jira.digi.com/browse/DEL-2231
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The install script allows for an easy deployment of the DEY firmware
artifacts into the eMMC of the ConnectCore 6 by using a micro SD card.
The install script:
- updates U-Boot
- resets the U-Boot environmnet to default values
- formats the User Data partition of the eMMC
- installs the firmware images (linux and rootfs partitions)
- resets/starts the system
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
The canonical symlinks created by poky's U-Boot class in u-boot.inc for
the different U-Boot configs are in the form:
u-boot.imx-<config>
u-boot-<machine>.imx-<config>
These symlinks have the .imx file extension hidden in the middle of the
file name, which looks ugly.
For DEY, remove these unused symlinks and generate new ones in the form:
u-boot-<config>.imx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
As the plan is to use the same git objects (SHA1) in the internal and
github repos, also remove that internal/external SRCREV infrastructure.
https://jira.digi.com/browse/DEL-2205
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Carrier board version is determined by U-Boot variable $board_id
which will be defined if a board ID has been burned on certain
OTP bits.
Use the value in this variable to create the $fdt_file variable
using the suffix "-id${board_id}" to point to the device tree
file that matches that board ID.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2160
ERROR: u-boot-dey: md5 data is not matching for file://Licenses/README;md5=0507cd7da8e7ad6d6701926ec9b84c95
ERROR: u-boot-dey: The new md5 checksum is c7383a594871c03da76b3707929d2919
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an atheros proprietary package that contains the athtestcmd and
wmiconfig applications.
Neither of them are currently used.
https://jira.digi.com/browse/DEL-1878
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Split the ATH6KL firmware files to a different recipe and package so
they can be used regardless of what driver we are using (the external
module or the upstream driver).
Reuse the 'firmware-atheros' recipe which was creating a package with
bluetooth firmware, to create the package with wireless firmware as
well.
Also remove 'ccimx6' as compatible machine for the external atheros
module, as the module does not even compile with the kernel version we
are using (3.14).
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one u-boot supported for each platform, so there is no
need to explicitly set the u-boot preferred version.
As a result it was needed to rework the nvram recipe which was using the
removed PREFERRED_VERSION_u-boot-dey variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of creating a new recipe for u-boot fw-utils (fw_printenv) just
bbappend the recipe in Poky.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a Consumer quad-core 1.2GHz, 4GB eMMC, 2GB DDR3, -20/+85C variant
with bluetooth and wireless, no kinetis.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Now each platform is only supported in one kernel version, so there is
no need to have multiple alsa config files per linux kernel version.
https://jira.digi.com/browse/DEL-1747
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following section configures the Audio Data Path to Voice Over UART.
//Audio - Audio main config
[H:S]0041
[H:S]0004
[H:A]01 00 00 00
The syntax is explained in the AR3002 2.2 Tag definition 1.0 document from
Qualcomm/Atheros.
Other audio sections are removed as they are not being used.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Adapt u-boot bootscript after latest changes in 'mmcdev' variable
semantics. Now the boot media device is stored in 'mmcbootdev' variable.
Also set the device tree filename depending on the hardware variant.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Support new memory chips for 'ccardimx28js'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit b7d108c35f6a26a78a4fbab399fd2c0878976a67)
Add post-installation script that runs on first boot to reconfigure the
u-boot environment depending on the media (EMMC,SD) the target is
booting from.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8486d120355d80ea8ad5864596c8486a1d3c0db2)
This is needed in the context of CC6 variants 0x7 and 0x9 (EMMC-less).
Changes:
* Do not use 'meta-fsl-arm' image generation class: removed include and
override SDCARD generation function
* Use same VFAT boot image for EMMC and SD card. The u-boot bootscript
has been adapted to be able to boot Linux from both SD and EMMC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8b8456b8fd90facd92dfc87632effa582ca60475)
Remove the current DEY variants support and framework for CC6 because in
following commits we will add support for all *hardware* variants in
just one set of DEY images for CC6.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The previous class 1 settings for the atheros bluetooth resulted in
output power higher than what is allowable in all regulatory
domains where class 1 devices are allowed on the CC6. The updated class 1
regulatory settings here reduce the maximum output power to levels
which pass when tested at an external lab.
This change resolves CCIMX6-389.
Signed-off-by: Paul Osborne <Paul.Osborne@digi.com>
Those packages are not machine specific, so there is no need to set
PACKAGE_ARCH to ${MACHINE_ARCH}.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
athtestcmd and wmiconfig are proprietary tools from Atheros. When
installed from GitHub we use prebuilt binaries because we cannot provide
the source code to the customers.
The prebuilt binaries need to be platform dependent, because the
'ccardimx28' uses soft-float binaries while the 'ccimx6' uses hard-float
binaries. Otherwise there is a failure:
root@ccimx6sbc:~# /usr/sbin/athtestcmd
-sh: /usr/sbin/athtestcmd: not found
While on it, removed the checksums for the binaries, as Yocto does
not verify checksums for local files by default, only for downloaded
files.
https://jira.digi.com/browse/DEL-1586
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8a3a124c75a885a619b41bf1e17118f1b3dec13c)
The SD card images support added a dependence to mkimage native tool.
Otherwise the build may fail with:
mkimage: not found
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With yocto 1.8 we need to pass CC and LD from yocto environment to
imx-bootlets makefile. Otherwise it fails:
arm-dey-linux-gnueabi-ld: cannot find -lgcc
make[1]: *** [output-target/linux_prep] Error 1
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 1.8 is more strict in the syntax when you append more flags to the
CFLAGS variable, because with previous yocto versions these packages
used to build fine and now fail with:
run.sstate_create_package: Syntax error: "(" unexpected
Use a different EXTRA_CFLAGS variable for our custom flags instead of
the standard CFLAGS.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The removal was added as a workaround to avoid installing a generic
asound.conf that was conflicting with our cards.
This is no longer needed as poky installs an empty asound.conf and
meta-fsl-arm overrides it with per-platform asound.conf files.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Arturo Buzarra
Alex Gonzalez
Hector Palacios
Mike Engel
Tatiana Leon
David Escalona
Pedro Perez de Heredia
Diaz de Grenu, Jose
Isaac Hermida
Jose Diaz de Grenu de Pedro
Paul Osborne