bitbake git's fetcher uses 'ls-remote' to get the branch revision to
checkout. If the repository has two branches ending equally the 'git
ls-remote' just picks the first one regardless of that being the correct
one.
In our case we were bitten by this bug because our git repo has:
...sha1-revision... refs/heads/android/v3.10/master
...sha1-revision... refs/heads/v3.10/master
and the fetcher was using the android branch instead of linux's
v3.10/master.
A patch has been sent upstream but while that gets applied to Dora
maintenance branch the workaround here is to set the absolute path in
the kernel's bitbake recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
After the upstream commit in d63c8a1597c9bd0a838cb59ca461ac432b630a90,
bitbake checks to see if the image feature has a valid packagegroup
associated.
For this check to work dey features need to be defined for all images,
not only dey images, so the definitions need to move to the distro
configuration file.
https://jira.digi.com/browse/DEL-852
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Previously jffs2 images flashed from u-boot were not booting Linux. The
kernel was unable to mount the rootfs.
There have been some patches lately in the kernel that fix this problem,
so build jffs2 images.
Nevertheless the default image type is still ubifs when using linux 3.x.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also make DEY image recipes more robust to misconfigurations, by setting
explicitly the required and conflict distro features.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLE variable has been deprecated in poky. The new
SERIAL_CONSOLES allows to configure multiple devices.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Features without a valid packagegroup need to be added to the
validitems list.
This needs to be in the distro configuration file as it needs to be
available to all images from all layers.
https://jira.digi.com/browse/DEL-853
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The do_update_dts function was hardcoded for ccardimx28js. We need to
make it mxs specific so the recipe can be used for other platforms that
do not share the same device tree configuration (for example the
upcoming ccimx6js)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Virtual keyboard was not showing up when clicking on the keyboard icon
in the menu bar. The reason was the keyboard xsession script was not
being run on X startup due to the extension '.shbg' of the original
script.
https://jira.digi.com/browse/DEL-911
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Formfactor config files are needed in now so the touchscreen calibration
is loaded on target's boot. Otherwise the touch is not calibrated.
https://jira.digi.com/browse/DEL-910
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bbappend only has a patch that does not apply anymore to the new
version of the package upstream (11.09.02).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
To be sure the 'cfg80211' module is settled down before the
'ath6kl_sdio' module tries to use it.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Version v3.4p6 seems to have some problems with WEP encription. Version
v3.4p4 seems to work better with WEP, so revert to that version.
https://jira.digi.com/browse/DEL-843
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This comes from the old Danny release where pulseaudio in minimal image
was giving a build failure (probablye due to dependences on X libraries)
This is not true anymore in Dylan, so just remove it for easier
maintenance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There seems to be a race condition in the load of the 'cfg80211' and
'ath6kl_sdio' modules. If we try to load the atheros module before the
cfg80211 is settled down, the driver crash.
The workaround is just separate the load of both modules in two separate
'modprobe' commands and add a small delay between them.
https://jira.digi.com/browse/DEL-814
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not well supported yet and cleans a debug line:
ath6kl: ath6kl_cfg80211_connect: sme->mfp = 0
https://jira.digi.com/browse/DEL-815
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Give priority to FSL AAC decoder over others from the community when
using gstreamer's playbin2 or gplay
This allows to play some videos that fail otherwise.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Without the fix if we only configure *one* display in the vssconfig file
(i.e. we set just one entry in that file) the patch was discarding that
configuration and overwriting the configuration with dual display
defaults.
But configuring a single display in vssconfig should be doable, so fix
the patch to allow that.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We found that the gst-fsl-plugin package from Yocto is not exactly the
same than the one we used in DEL even though they have the same
version.
We think the one we used in DEL (released by FSL via LTIB) is more
recent and has some fixes, so create a first patch that applies on top
of the one in Yocto and convert it to the one in DEL.
Also instead of appending new patches to meta-fsl-arm SRC_URI, override
completely the variable and add the patches from meta-fsl-arm layer in
our own layer.
The final result is: we use the yocto tarball, then apply a first patch
that converts it to the one in DEL/LTIB, then apply the patches from
meta-fsl-arm and finally the ones added by us.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Alex Gonzalez
Javier Viguera