The profiles created for the sgtl5000 sound card didn't have any priorities
assigned, making pulseaudio map a different profile than before and causing the
sink to remain unloaded.
This commit fixes this by assigning a priority to each profile. The values
were taken directly from the default profile to assure that pulseaudio's
behavior is the same using one profile or the other.
https://jira.digi.com/browse/DEL-3602
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
NAND partitions may have pre-existing UBI volume information
and that will tell U-Boot to use 'ubiwrite' to keep UBI wear
leveling information instead of erasing the NAND partition
beforehand. Given that the UBI support in U-Boot is not
particularly complete and stable, and specially if the NAND
partition table has been changed, this could result into
problems during the UBI volume initialization or during the
update process. To prevent such problems it is better that
the NAND partitions are erased.
This loses the UBI wear leveling information but provides
a more reliable deployment install script.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-718
We have seen corner cases (e.g. when the partition to format has already
some corrupted UBI metadata) where ubiformat stops and ask the user for
confirmation to do the format. We cannot have such interactivity in the
recovery ramdisk so use the '-y' argument to assume yes for all
questions.
Also use the '-q' (quiet) parameter instead of the '/dev/null'
redirections to remove command's output.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Modify patch to clean compiler warning:
warning: passing argument 1 of 'sysfs_mmcboot_set_protection' discards
'const' qualifier from pointer target type
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the commit that removes the p2p0 interface at boot. This interface
is the one used to establish p2p connections. Configuring the wlan0 command
for p2p does not work.
https://jira.digi.com/browse/DEL-3390
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The qualcomm wlan driver creates two interfaces at load time, wlan0 and
p2p0. Both of them should load the module if not already loaded.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For the moment the cloudconnector is provided only as static library, so
the recipe can be simplified.
https://jira.digi.com/browse/DEL-3523
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In pulseaudio, module-suspend-on-idle controls how much time a sink spends
in the 'idle' state before going to 'suspended'. This means the ALSA device
associated with the sink stays busy for a few seconds after loading or using
the sink.
This commit adds the timeout=0 parameter when loading module-suspend-on-idle.
Now the sink will go to the 'suspended' state right after being loaded or used.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
On boot, pulseaudio looks for the sound cards' corresponding profile sets, and
uses a default configuration if none is found. This was causing pulseaudio to
take up to 5 seconds trying every possible default profile.
This commit fixes this by creating a specific profile set for each of the sound
cards on the ccimx6sbc so pulseaudio doesn't spend time trying different
profiles that don't apply to our platform. It also adds udev rules so
pulseaudio knows which configuration to load for each card.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The HDMI hotplug script required alsa-utils to be installed in order to work.
This commit avoids this by adding a recipe for a small binary that replaces
aplay in the script.
https://jira.digi.com/browse/DEL-3482
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of using a hardcoded path to the SWU update package, just get
the filename and search the file in the different mounted partitions
(giving priority to the internal 'update' partition over other external
media).
https://jira.digi.com/browse/DEL-3466
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For block devices we can get the filesystem in the partition using the
'blkid' command.
This cleans up some warnings on mounting:
EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
"i" variable in the nested loop is expanded to the absolute path
of the device, so prepending it with the ${device} results in
"/dev/sda/dev/sda1" for a 'sda1' partition.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These examples can be used to test Device Cloud functionality. There are three
test applications available:
* device_request_listener: Listen for requests from the Device Cloud
* upload_data_points: Upload test data points to the Device Cloud
* upload_file: Uploads the contents of a file as binary data points
https://jira.digi.com/browse/DEL-3305https://jira.digi.com/browse/DEL-3309https://jira.digi.com/browse/DEL-3397
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Even though this variable is documented as unused, removing it fails
wireless regression tests.
https://jira.digi.com/browse/DEL-3501
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This avoids the certificate package being generated according to Debian
rules (libcloudconnector-cert).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This re-enables USB mass storage support that was unintentionally
removed in commit 6851ab23e4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-713
The dependence on virtual/kernel is added implicitly through the module
class, so there is no need to add it explicitly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This updates the kernel configuration to the latest one
which disables unused drivers and options to optimize the
kernel size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The CC6UL has little video capabilities and reduced storage memory so lets
remove gstreamer plugins included in -bad and -ugly to reduce the rootfs
size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-713
Javier Viguera
Hector Palacios
Gabriel Valcazar
Alex Gonzalez
Alejandro Navarro
David Escalona
Diaz de Grenu, Jose