Replace the standalone connectcore-demo-example-webkit recipe with
a bbappend extending the main demo recipe. This is in preparation for
adding support for chromium-based connectcore demo.
While on it, merge the .inc file into the main recipe as there is only a
consumer of that inc file. Also minor cosmetic fixes to make the recipe
more Yoct-ish.
https://onedigi.atlassian.net/browse/DEL-9838
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Version 1.6.4 is no longer available, as meta-openembedded updated it
to version 1.6.5. Update our preferred version using a wildcard as our
libdigiapix depends on the 1.6.x series.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Integrate ST libcamera recipe from meta-st-openstlinux layer at
openstlinux-6.6-yocto-scarthgap-mpu-v25.06.11 tag. This recipe is required by
the NPU demos in meta-st-x-linux-ai.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The ccimx95 does not share most of the configuration with the ccimx91/93,
so use a specific configuration file.
At the moment only the GPIO's configuration is updated for the ccimx95
(user LEDs and BUTTONs).
https://onedigi.atlassian.net/browse/DEL-9809
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use ${servicedir} instead of hardcoded /srv, disable unnecessary
configure/compile steps and reorder the recipe according to Yocto coding
style.
No functional change.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Out of the three patches we currently apply to v2.44.4, two are no longer
needed for v2.46.7:
* 0001-Build-fix-when-LAYER_BASED_SVG_ENGINE-is-off.patch is already
included in v2.46.X releases
* 0001-DMABufVideoSinkGStreamer-disable-sink-unconditionall.patch is no
longer needed, since the GL sink is chosen by default in v2.46.7
Only port 0001-UIProcess-WebProcessPool-always-swap-process-when-us.patch to
avoid performance issues on platforms with memory restrictions.
Keep the v2.44.4 patches in case customers want to use said version, and
clearly separate the patchsets for both versions.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This partially reverts commit 6a7e9fa9e4. We initially downgraded to v2.44.4
to fix an issue with mouse clicks in our ConnectCore demo, but these issues
have been fixed after cog was upgraded to v0.18.5 in meta-webkit.
Remove the downgrade to use the newest v2.46.X versions of wpewebkit in the
scarthgap branch of meta-webkit, currently at v2.46.7.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use an HCI vendor-specific command from Infineon on bluetooth-init
to set a custom MAC address every time the interface is started.
Valid for both CCMP1 (Murata 2AE) and CCMP2 (Murata 2FY) devices.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add a variable analogous to TRUSTFENCE_SIGN to enable/disable artifact
encryption. Deprecate TRUSTFENCE_DEK_PATH in favor of TRUSTFENCE_KEYS_PATH to
use a more generic name and avoid overloading it as an on/off flag. Add per-key
variables for encryption key filenames to avoid hardcoded names and allow
platform overrides.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the dcmipp-isp-ctrl recipe to align with the version
provided in OpenSTLinux v6.1.0. This new version includes support for histogram
handling in the ISP controller.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Adds support for signing and encrypting Cortex-M firmware on STM platforms,
following the STM32 MPU Ecosystem v6.1.0. This update enables secure boot of
co-processor binaries on ConnectCore MP2, enhancing firmware protection.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package is specially required for configuring the camera
paths on the newest kernels and capture drivers.
Include it by default in all platforms that support video.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Let customers decide if they only want to generate SBOMs for a subset of their
images, or none at all
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit b010285f785706635b6a765a529d6d4d0e087ddc)
This is the version supporting the i.MX95. This library is a dependence
of the gputop package.
As a requirement to allow building this library for the ccimx95-dvk,
update the fsl-eula-graphics bbclass with the latest changes in meta-imx.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This .bbclass allows to generate a .zip file per image, each containing all of
the necessary information to run a CVE scan using the Digi ConnectCore Security
Services' CVE analysis tool.
https://onedigi.atlassian.net/browse/DEL-9632
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit fabce3a881454c8a7346538127da5f22862654b6)
This commit updates the secure boot support for STM platforms based on the
STM32 MPU Ecosystem v6.1.0. It introduces support for encrypted boot artifacts,
including TF-A and FIP, and enables this functionality for the ConnectCore MP2
platform.
This enhancement allows secure boot deployments with both authentication and
encryption for improved protection of critical boot components.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Currently, the patch is identical for all ccimx9 platforms, so move it
to a generic override folder to be used also for ccimx95.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the wl_shell and libweston patche, which
are now not necessary anymore. Becasue we have removed the
wayland backend for the LVGL image.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit removes the wayland backend use directly the video
interface and reduce image size. In this version the wayland
support is still not fully suport or similar how it was in the
previous verison we used.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit upgrades our LVGL support to v9.3.0.
We used the meta-openembedded implementation, reference
and reused the lv_conf.inc file for the demo configuration.
https://onedigi.atlassian.net/browse/DEL-9222
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
A recent change in meta-st-x-linux-ai was completely overwriting our default
PACKAGECONFIG values, causing several plugins to be omitted (for example, the
wayland plugin). In turn, this was causing several build errors in many
packages that depend on said plugins.
Use a strict PACKAGECONFIG assignment to prevent this. As a side effect, this
removes the new "uvcsink" PACKAGECONFIG introduced by the recent change in
meta-st-x-linux-ai, so make sure to re-add it to avoid unexpected behavior when
building the brand new people-tracking-heatmap AI example.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
STM recently updated their AI layer from v6.1.0 to v6.1.1, so our v6.1.0
bbappend wasn't being applied anymore. Use a wildcard for the hotfix version
number in case this happens again in the future.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
While on it, remove the third argument to write_artifact_emmc function,
as write access is always needed to write in U-Boot partitions, otherwise
they would be 'ro' protected.
https://onedigi.atlassian.net/browse/DEL-9735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
(cherry picked from commit 5001419caf)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since commit 7f1a3011521c955760b2fec24e64a721d22eaa91 ("applications: replace
camera source v4l2src with libcamera") in the meta-st-x-linux-ai layer, the
setup camera script has been replaced by libcamera. As a result, these patches
are no longer applicable.
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.1.0 software package from the meta-st-x-linux-ai
layer.
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
While on it, remove the third argument to write_artifact_emmc function,
as write access is always needed to write in U-Boot partitions, otherwise
they would be 'ro' protected.
https://onedigi.atlassian.net/browse/DEL-9735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Until DEY 5.0, the ccimx6ul platform was the only one that did not include a
`data` partition.
As a result, `cccsd` had to store the client certificate from Remote Manager in
the root filesystem, under `/etc/ssl/certs` by default.
This setup caused issues after a software update, as the received client
certificate would be lost, making the device unable to reconnect to the server
until the certificate was manually reset from Remote Manager.
The same problem occurred in dual-boot systems, since the certificate was stored
in the rootfs of the current bank and was not accessible from the other bank.
To avoid this situation, the ccimx6ul used the `remotemanager.digi.com` endpoint
instead of `edp12.devicecloud.com`, as the former does not support or deliver
client certificates.
Now that DEY 5.0 includes a `data` partition in the ccimx6ul partition table, we
can remove this exception and allow the use of `edp12.devicecloud.com`, storing
the certificates persistently in the `data` partition.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
The latest X-LINUX-AI v6.0.1 release consolidated the config_board_npu.sh
script across all STM32MP2x platforms with NPU support. As part of this
consolidation, the supported video resolutions were unified under a single
default setting, which does not work correctly with USB webcams.
This commit updates Digi’s custom patch to adjust the internal resolution used
for processing video streams from webcams, ensuring proper support and
functionality.
https://onedigi.atlassian.net/browse/DEL-9721
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since the release of X-LINUX-AI v6.0.1, AI support has been split between
devices with NPU and those relying solely on CPU. As a result, the Digi custom
patch to enable USB webcam support was no longer applied, because the
config_board_npu.sh script is now handled by the new config-npu.bb recipe.
This commit addresses the issue by introducing a new bbappend for config-npu,
ensuring that the webcam-related patch is correctly applied for NPU-enabled
platforms.
https://onedigi.atlassian.net/browse/DEL-9721
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Systemd-based systems do not use the global /etc/sysctl.conf file. Instead,
they read configuration from individual files under /etc/sysctl.d. This
change installs our sysctl settings as /etc/sysctl.d/console.conf when
systemd is enabled.
For systems that do not use systemd, the configuration file is still
installed at /etc/sysctl.conf. The CONFFILES entry is also updated.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
The vsftpd-cert init script was previously starting too late,
causing vsftpd to start before the certificates were generated.
The priority has been increased (to 70) so that vsftpd-cert
runs earlier during boot.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Removed curl_%.bbappend which forced the use of ares over the default
threaded-resolver. We did this customization for NetworkManager long
ago in the context of network failover. Later we dropped it from NM,
but the customization in curl remained.
This saves approx. 100KB in the rootfs (libcares.so).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Disable GTK-based gstreamer player and connman network manager
* Remove matchbox-terminal to avoid pulling ICU
* Avoid pulseaudio client configuration to prevent duplicate instances
Also, delete the autospawn-for-root package config removal in our bbappend,
as that is not enabled by default in the recipe.
https://onedigi.atlassian.net/browse/DEL-9685
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Y2038: compile pulseaudio and alsa-lib with 64bit time flags
* Add patch to fix playback stuck issues on suspend/resume
https://onedigi.atlassian.net/browse/DEL-9681
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As of Yocto 5.0, Poky includes an equivalent solution for the Y2038 issue,
so drop the redundant code in meta-digi.
https://onedigi.atlassian.net/browse/DEL-9681
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On the CCMP13 platform, the inclusion of pam_systemd in the PAM stack
causes excessive delays during login -close to 10 seconds- and can
even lead to SSH login failures.
Since we do not require per-user systemd services (--user), disable
the pam_systemd session module to improve login responsiveness.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit enables SSL/TLS support in vsftpd, allowing FTP communications to
be encrypted for improved security.
SSL/TLS support is enabled by default, but to preserve compatibility with
clients that do not support encrypted connections, this feature can be disabled
at runtime. Users can simply comment or uncomment a few lines in the
`vsftpd.conf` configuration file to toggle the behavior.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This generates an installer.zip image with all the firmware
images, including install scripts for UUU, SD card, and USB.
This is helpful to share the artifacts with manufacturing
or for deploying to external media such as microSD or USB stick.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The HCI_UART Bluetooth driver does not support suspend-to-RAM operation, so the
driver must be loaded and unloaded manually. This commit adds support for the
Bluetooth initialization script used across Digi platforms, specifically for
ConnectCore MP13 and MP15.
https://onedigi.atlassian.net/browse/DEL-9650
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When you create a bridge between Wi-Fi hostap and Ethernet, it's more
convenient to let the bridge take an appropriate dynamic IP from the
DHCP server, than needing to configure a manual one.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit includes a new tarball based on trustfence-fscrypt v0.2,
cross-compiled against libteec v1.0.0, to enable support for STM32MP1x platforms.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
add a new recipe to include nxp prebuilt binaries for:
* mlanutl: WoWLAN support
* nanapp: NAN support
* nmlawls: monitor Wi-Fi events
Included prebuilt version obtained from next release:
SD-WLAN-UART-BT-SPI-OT-Zigbee-DualPAN-IW612-LNX_6_12_3-IMX8-18.99.3.p23.20-18.99.3.p23.20-MM6X18505.p23-GPL.zip
https://onedigi.atlassian.net/browse/DEL-8462
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
poky commit 3c9b461dd0d26a5f6941000d839636ad32cd6f29 added this binary to the
bluez5-noinst-tools package, and it has the same exact path as the one from our
dey-examples-btconfig package. This causes a conflict when both packages are
installed in the same image.
Judging by bluez5's btconfig sources, it's merely a skeleton without any real
functionality, so simply remove it to avoid the conflict.
https://onedigi.atlassian.net/browse/DEL-9612
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some of our example recipes that are meant to be used on specific platform
subsets are available to be built/installed for all platforms. Even though it's
possible to build/install these recipes for platforms they aren't meant for,
we should restrict them to their intended platforms:
* dey-examples-btconfig: this is only meant for ccimx6 platforms that use
the Atheros wifi/bt chip, so reflect this in the recipe and in the
examples packagegroup.
* dey-examples-tamper: this is only meant for platforms with MCA (ccimx6ul,
ccimx8x and ccimx8m). This requirement was already set in the examples
packagegroup, but the recipe was available to any platform.
https://onedigi.atlassian.net/browse/DEL-9612
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 15f9aeba0e removed the dey-examples-v4l2
recipe, yet we still kept it as a dependency for ccimx6 platforms. Remove this
impossible dependency to be able to build the examples packagegroup for ccimx6
platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This version of swupdate has a bug that happens if the root of sw-description
is redirected via a link, which is the case is some of our sw-description
templates (such as the one we use for file updates). Backport a fix from
v2025.05.
https://onedigi.atlassian.net/browse/ADK4A-1957
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 5bdd59a647)
This version of swupdate has a bug that happens if the root of sw-description
is redirected via a link, which is the case is some of our sw-description
templates (such as the one we use for file updates). Backport a fix from
v2025.05.
https://onedigi.atlassian.net/browse/ADK4A-1957
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Like we do for our other supported images, provide a recipe to generate a SWU
package based on dey-image-flutter
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When building DEY 5.0 ccmp15-dvk images with Qt6 instead of Qt5, the rootfs
image is too big for the default settings (512 MiB, dualboot enabled). Make
room by removing the *-examples Qt6 packages, which are over 30 MiB in total.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
There are several recipes in meta-digi related to features that we haven't
tested in a long time and don't appear in the DEY 5.0 documentation. Remove
them to avoid unexpected behavior.
Said features are:
* Coral TPU support (only supported in DEY 3.2)
* AWS support (removed from default images and docs in DEY 4.0)
* dey-image-tiny (hasn't been maintained since DEY 2.0)
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The patch we applied for the ccimx8x to enable VPU usage when playing
videos under WebKit is also necessary for the ccimx8mm.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ubihealthd daemon, present in mtd-utils does random
scans of the UBI devices on a given interval. This helps
to deal with 'read disturb' problem on NAND flashes.
The service runs a ubihealthd thread for every UBI device
with a read interval of 1 hour by default.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9571
Commit 9c3916da94 added INSANE_SKIP
"32bit-time" to certain recipes that use 32bit APIs on the ccmp1
SOMs, but forgot to include the `pn-` prefix to really apply to
those recipes.
While on it, add two additional ones on recipes used by NXP 32-bit
platforms.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* Remove wayland_1.22.0.bbappend, with changes originally added for Crank
UI (commit 25c699e05b), which we no longer support.
* Update wayland_%.bbappend to align with NXP’s rel_imx_6.6.52_2.2.0
release.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
That includes several CVE patches not present of meta-freescale's
23.2.5.imx recipe (which is based in exactly the same revision).
Similar change was done in NXP's meta-imx (see commit
99ceb057fcfdc8151c1488089d5f22363dfdb6d7).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the tarball to be based on libteec v1.0.0, as the previous
version was generated without the correct Trusted Application (TA) and did not
work properly.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces a dynamic layer that extends the flutter-apps layer by
adding an init service to automatically launch the Flutter demo on boot.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.0.1 software package from the meta-st-x-linux-ai
layer.
The update removes support that is now provided directly by the ST layer in
this new version and adapts existing recipes to align with the updated
mechanisms for AI application integration. These changes ensure compatibility
with platforms that feature hardware acceleration (NPU), as well as those that
rely solely on CPU-based inference.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Typically, recipes that support clang builds only pull in the required clang
dependencies when the TOOLCHAIN variable is expliciltly set to "clang". The
qttools recipe in meta-qt6 differs from this by adding the dependency as soon
as meta-clang is present in the bblayers, regardless of the selected toolchain.
This causes all of the nativesdk clang packages to get included in our SDK
(along with the gcc ones), causing SDK bloat and spurious build errors on build
machines with limited resources.
Make sure that the dependency is only added when the clang TOOLCHAIN is
explicitly selected.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.0.1 software package from the meta-st-x-linux-ai
layer.
The update removes support that is now provided directly by the ST layer in
this new version and adapts existing recipes to align with the updated
mechanisms for AI application integration. These changes ensure compatibility
with platforms that feature hardware acceleration (NPU), as well as those that
rely solely on CPU-based inference.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Flutter is an open source framework for building multi-platform applications
without a graphical backend running. This commit adds support to create a new
DEY image type based on Flutter ready to use for the users.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Even though we launch said demo with WebKit's page cache disabled, WebKit still
caches most of the demo's contents for two reasons:
* The demo is browsed using a non-HTTP(S) protocol (file://)
* The demo is contained within the same domain (same-site browsing)
This can lead to unexpected behavior on platforms with small RAM size. Add
a workaround to force WebKit to create a new web process everytime we open
a page on the demo, deleting the previous process and freeing its memory.
An alternative solution would be to alter our demo to make sure a page's
resources are correctly freed when exiting said page, but this provides a
general solution that ensures memory cleanup in all cases, albeit with slightly
longer loading times.
https://onedigi.atlassian.net/browse/DEL-9498
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit includes a new tarball based on trustfence-fscrypt v0.2,
cross-compiled against libteec v1.0.0, to enable support for STM32MP platforms.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates secure boot support based on the STM32 MPU Ecosystem v6.0
and integrates support for the ConnectCore MP2 platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Refactored some functions to make them more generic, allowing for
greater parameter reusability.
https://onedigi.atlassian.net/browse/DEL-9526
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
dnsmaqs is not able to manage DNS from cellular interface.
Now, DNS is managed by systemd-resolved on platforms with
systemd and by NetworkManager on sysvinit platforms.
https://onedigi.atlassian.net/browse/DEL-9353
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
dnsmaqs is not able to manage DNS from cellular interface.
Now, DNS is managed by systemd-resolved on platforms with
systemd and by NetworkManager on sysvinit platforms.
https://onedigi.atlassian.net/browse/DEL-9353
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
hwlatdetect is intended for monitoring hw latency on real time systems
that rely on SMI interrupts (mainly x86 machines).
As our devices that not support it, do not include the tool.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
hwlatdetect is intended for monitoring hw latency on real time systems
that rely on SMI interrupts (mainly x86 machines).
As our devices that not support it, do not include the tool.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This was causing issues when installing an SWU package on ccmp1 platforms with
dualboot disabled and Trustfence enabled: the package was triggering an
encrypted rootfs update, which isn't supported on these platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit af06ea16adc85285d9264468d2fd5946ed401de9)
Javier Viguera
Arturo Buzarra
Gabriel Valcazar
Hector Palacios
Gonzalo Ruiz
Mike Engel
Isaac Hermida
Tatiana Leon
Francisco Gil