The SD card images support added a dependence to mkimage native tool.
Otherwise the build may fail with:
mkimage: not found
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove support for device tree variants as it's not needed. We will
only have different device tree for the different CPUs, but not for the
different variants of the same CPU.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With yocto 1.8 we need to pass CC and LD from yocto environment to
imx-bootlets makefile. Otherwise it fails:
arm-dey-linux-gnueabi-ld: cannot find -lgcc
make[1]: *** [output-target/linux_prep] Error 1
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 1.8 is more strict in the syntax when you append more flags to the
CFLAGS variable, because with previous yocto versions these packages
used to build fine and now fail with:
run.sstate_create_package: Syntax error: "(" unexpected
Use a different EXTRA_CFLAGS variable for our custom flags instead of
the standard CFLAGS.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need to append our config to EXTRA_OEMAKE variable instead of
overriding it, because otherwise we lose some config from the
environment (e.g. KERNEL_SRC) and the build fails with:
make: *** M=...kernel-module-.../git: No such file or directory
Also remove redundant PACKAGE_ARCH setting, as it's inherited from
module-base class.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The way the kernel is built in yocto 1.8 has changed. Now the
build is done under ${WORKDIR}/build while the source code is at
STAGING_KERNEL_DIR, so we need to modify the '.config' in the build
directory instead of in the source directory.
This fixes:
kernel-source is not clean, please run 'make mrproper'
make[2]: *** [prepare3] Error 1
make[1]: *** [sub-make] Error 2
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Variant 0x8 does not have wireless/bluetooth, but it uses the same
device tree than the other variants.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3ba5bff51ebbe6be8325128ae3beb950993607d2)
Variant 0x5 (Furuno) does not have bluetooth, but the device tree in the
kernel is the same than the variant with bluetooth.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 7de11f08e95fecb8d4895556292a488a91af6817)
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 015d029255eb407cca4c986562a304aef7de3940)
Kernel 3.10 does not fail to build perf features (as kernel 2.6.35
does), so there is no need to disable them for platforms using that
kernel version.
https://jira.digi.com/browse/DEL-1418
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Revert to the old way of setting the console for ccardimx28js. Configure
the console on the generic ttyS0 port name and let the device managers
create a symbolic link to the correct device at runtime.
Trying to set it statically at compile time lead to some side effects
with some packages not being recompiled after a change of the preferred
kernel version in the project's local.conf (e.g. udev-extraconf and
sysvinit-inittab).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
A post-down script was unloading the Atheros wireless driver
when the network interfaces were brought down.
On rare occasions the 'rmmod' command was not able to complete
and may leave the system in an unexpected state.
This patch removes the post-down script for the ccardimx28 platform
and leaves it only for the ccimx6 platform, where the unloading
is wanted to reset the driver after suspend.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-1314
SERIAL_CONSOLES_CHECK is new functionality provided by Yocto, but it
needs '/proc/consoles' supported by the kernel. Our kernel 2.6.35 does
not support '/proc/consoles' so rework the serial console configuration
to work with both kernels (2.6.35 and 3.10).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The i.MX6 has an internal PMU with LDOs to supply voltages to the different
ARM sybdomains. There are two possible configurations, to use this internal
LDOs or to use the external PMIC to supply the voltages (LDO bypass).
The default is to boot with LDO bypass, and the device tree with the -dts
suffix will boot with the i.MX6 internal LDO.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
In Yocto 1.7 meta-fsl-arm replaced udev-extraconf bbappend with a new
package (udev-rules-imx). So we need to adapt our own bbappend to these
changes so all the needed udev rules are in place.
https://jira.digi.com/browse/DEL-1336
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The removal was added as a workaround to avoid installing a generic
asound.conf that was conflicting with our cards.
This is no longer needed as poky installs an empty asound.conf and
meta-fsl-arm overrides it with per-platform asound.conf files.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We inherited from DEL the requirement to build more than one flash image
for the same rootfs contents depending on the EBS of the flash chip.
Yocto does not have support to generate more than one flash image so we
had to create functions in the image_types_digi bbclass to provide this
feature.
This commit removes that functionality and uses the standard yocto
support to generate ubifs and jffs2 flash images. The way to customize
the flash parameters is via EXTRA_IMAGECMD_jffs2 and MKUBIFS_ARGS
variables. In our case those variables are already set depending on the
different hardware variants.
https://jira.digi.com/browse/DEL-232
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for Dizzy maintenance branch.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This bbappend was added to be able to native build the util-linux
package in our old buildserver (with Debian 6). This is no longer needed
as we migrated our buildserver to newer Debian.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add possibility for other layers to add additional features for UBIFS creation,
e.g. "-R <rp_size>" for super-user reserved pool.
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
The interfaces file is now dynamically created for eth0, eth1 and wlan0. By
default they are configured if enabled in the machine features, and have
the same static configuration as before.
The static IPs can be configured as follows:
ETHn_STATIC_IP = "<ip address>"
ETHn_STATIC_NETMASK = "<netmask>"
ETHn_STATIC_GATEWAY = "<gateway>"
WLAN0_STATIC_IP = "<ip address>"
WLAN0_STATIC_NETMASK = "<netmask>"
To configure dynamic IPs you can use the following configuration in your
local.conf:
ETHn_DHCP = "dhcp"
WLAN0_DHCP = "dhcp"
https://jira.digi.com/browse/DEL-1178
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Javier Viguera
Hector Palacios
Alex Gonzalez
Robert Hodaszi