There is no need to generate PV-PR revision of this file
since it's the same for any version.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The recipe needs to create a copy of the sign.sh script to be used by
other recipes, but the file is the same whether you use it for HAB or AHAB
images. This is determined through the use of an exported variable with
the mode. There is no need to have the script duplicated.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This binary is required for signing the U-Boot scripts generated
by the U-Boot recipe but it wasn't available because this recipe
was not installing it anywhere.
At the same time, remove the installation from imx-boot, to avoid a
conflict between the two (imx-mkimage is a dependency from imx-boot
anyway).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit adds some dependencies to include the imx-mkimage package
that is needed to use the mkimage_imx8 tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 31d8ff94 ("meta-digi-arm: u-boot: Update recipes with new u-boot version")
updates the license checksum for the new u-boot_2019.04 recipe, however this
license file is different for the other u-boot versions.
This commit reverts this change and includes the updated checksum only for the
new u-boot_2019.04 recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Wrapped lines must have a back-slash symbol so that U-Boot
doesn't interpret them as finished.
The missing symbol resulted in the script not being able to
determine the U-Boot image to program in some cases.
Reported-by: Leonid Makhnovskiy <leonid.makhnovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6953
This file does not longer exist. It has been replaced by bdwlan30_US.bin,
which is already included to the community driver option.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update US Board Data File to fix a wrong calibration of channel 7 (2442 MHz).
The rest of the file remains the same.
The new BDF is:
- bdwlan30_US.bin (f6ec3328309aaa3e187295446966ab27)
https://jira.digi.com/browse/DEL-6922
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- bdwlan30_US.bin (d5221377de1dde9ff442740e56fea647)
This file was generated by calibrating several CC8MN DVKs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30_US.bin (a5635e39aaaa220094e0d07f7a4f4567)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The new driver uses the same files for both platforms (6564,
6574). The specific platform binaries have been removed.
Now the modifications of the nvm_tlv_3.2 to disable the IBS
is done by the recipe.
The disable of the deep sleep and the enable of the internal
clock is done in the recipe only for the CC6UL.
We have used the files from the following repo:
qca6574au-le-2-2-2_qca_oem -> 4d29c6886f2Commit label r00005.1
- CS2.2 0.0.005.1
md5sum
------------------------------------------------------------
nvm_tlv_3.2.bin -> a97cdfe80e8109cf3574f74cd3c73fc7
rampatch_tlv_3.2.tlv -> 72d28614afd0abe5846c1758099282e3
https://jira.digi.com/browse/DEL-6766
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update the wireless driver to a newer version that supports both
chips (qca6574 and qca6564).
We keep the same bdwlan30_US.bin files as the previous version
of the driver (or fakeboard_US for the qca6474).
Rename directories to qca65X4_driver_interface.
We have used the files from the following repo:
qca6574au-le-2-2-2_qca_oem -> 4d29c6886f2Commit label r00005.1
- CS2.2 0.0.005.1
md5sum
----------------------------------------------------------
qca65X4_pcie: otp30.bin -> 9d1cf03473904bd8b97fa30bc92b4a16
qwlan30.bin -> 794f7a6f12ef3e6f8db6257b3a6f896f
utf30.bin -> 41cfb4e50613cd0eeb0fa99a005131bd
qca65X4_sdio: otp30.bin -> e018e7b629b055dc4616c7e88c615b41
qwlan30.bin -> fe37bc043132ecf21e504eb33f46b846
utf30.bin -> 4743dee015047752e433e69f4db89974
https://jira.digi.com/browse/DEL-6766
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Although the recipe was updated with the modifications in meta-fsl-bsp-release,
the revision was still pointing to the sumo-4.14.98-2.2.0 version of
imx-mkimage, which is incompatible with our recently updated patch.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to NXP's v1.3.0 porting kit and add power optimizations for suspend
mode.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to v2.5.4 and add new recipe imx-seco-libs. For the time being, use the
B0 firmware for all i.MX8QXP platforms and leave C0 support in a comment.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCREV and SRCBRANCH, change the names of the m4 demos that are
installed into imx-boot, change the name of the SECO firmware (ahab container)
and update our patch so it applies over the newest revision of imx-mkimage.
For the time being, use the B0 SECO firmware for all i.MX8QXP platforms and add
the changes needed for C0 support in comments.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The LPDDR4 retention code is executed as part of the suspend/resume process.
When resuming, this code writes to a register that doesn't exist on the
i.MX8MN, causing the system to freeze before control is returned to Linux.
Add a patch that introduces a compile-time check for the SoC type to avoid
performing the write operation on the i.MX8MN.
https://jira.digi.com/browse/DEL-6914
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Cortex-M7 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Nano DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For the i.MX8M processors, the do_deploy support is provided by
the upstream recipe firmware-imx-8m.
https://jira.digi.com/browse/DEL-6911
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a332ff445f)
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This imx-seco recipe manages now the NXP IMX SECO firmware, it was removed
from the firmware-imx recipe.
https://jira.digi.com/browse/DEL-6823
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (e1db4a300b58776f8abd8588beadc09e)
This file was generated by calibrating several CC8X SOMs and SBCs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (3e558869e3943da08899abd881455bc6)
This file was generated by calibrating several CC8X SOMs and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Hector Palacios
Mike Engel
Arturo Buzarra
Gonzalo Ruiz
Gabriel Valcazar
Francisco Gil