The current value only allows partitions of up to 8 MiB, which is not
enough for the 0x04 variant (which uses a linux partition of 24 MiB by
default).
This new value allows for up to 32 MiB (assuming 128 KiB erase block size).
Also add comments explaining the -c value and maximum partition sizes
supported.
https://jira.digi.com/browse/DEL-4971
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This only affects the CC6UL, where by default now 'qtsmarthome' is
installed instead of 'qtbase-examples'.
This serves two purposes:
* Remove the 'qtbase-examples' package from the CC6UL to save space.
* Use 'qtsmarthome' as a demo of a QML application running on the CC6UL
using Qt Quick 2D Renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of having a recipe to add launchers for a bunch of applications
(most of them are not available anymore) move the qtsmarthome launcher
to the recipe that installs the package.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The demo application uses 'svg' images, so at runtime it depends on
'qtsvg-plugins' package.
Also add a patch to fix a runtime warning:
Both point size and pixel size set. Using pixel size
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an alternative software based renderer for QtQuick2
applications for hardware that doesn't have a GPU.
This is the case of the CC6UL. It does not have a GPU, so the only way
to run QML applications is using this software renderer.
https://jira.digi.com/browse/DEL-3912
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
After the 'ccardimx28js' platform removal, these variables and machine
features are not used anymore, so remove them.
https://jira.digi.com/browse/DEL-4771
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In the past QT package did include some fonts, but not anymore. New
versions of QT do rely on an external font package being installed in
the rootfs.
Without fonts the QT applications just show up in the screen but
obviously with no text at all.
https://jira.digi.com/browse/DEL-4724
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This patch makes smaller libQt libraries saving some space in the CC6UL
rootfs.
Libraries size before the patch:
root@ccimx6ulsbc:~# ls -l /usr/lib/libQt*5.7.1
22448 Aug /usr/lib/libQt5Concurrent.so.5.7.1
5347036 Aug /usr/lib/libQt5Core.so.5.7.1
508464 Aug /usr/lib/libQt5DBus.so.5.7.1
4419712 Aug /usr/lib/libQt5Gui.so.5.7.1
1367776 Aug /usr/lib/libQt5Network.so.5.7.1
275900 Aug /usr/lib/libQt5OpenGL.so.5.7.1
341688 Aug /usr/lib/libQt5PrintSupport.so.5.7.1
88628 Aug /usr/lib/libQt5SerialPort.so.5.7.1
290960 Aug /usr/lib/libQt5Sql.so.5.7.1
212432 Aug /usr/lib/libQt5Test.so.5.7.1
5306588 Aug /usr/lib/libQt5Widgets.so.5.7.1
894928 Aug /usr/lib/libQt5XcbQpa.so.5.7.1
191404 Aug /usr/lib/libQt5Xml.so.5.7.1
Libraries size after the patch:
root@ccimx6ulsbc:~# ls -l /usr/lib/libQt*5.7.1
18352 Aug /usr/lib/libQt5Concurrent.so.5.7.1
4032380 Aug /usr/lib/libQt5Core.so.5.7.1
303684 Aug /usr/lib/libQt5DBus.so.5.7.1
2867436 Aug /usr/lib/libQt5Gui.so.5.7.1
839428 Aug /usr/lib/libQt5Network.so.5.7.1
239044 Aug /usr/lib/libQt5OpenGL.so.5.7.1
267976 Aug /usr/lib/libQt5PrintSupport.so.5.7.1
59960 Aug /usr/lib/libQt5SerialPort.so.5.7.1
172192 Aug /usr/lib/libQt5Sql.so.5.7.1
171500 Aug /usr/lib/libQt5Test.so.5.7.1
4282740 Aug /usr/lib/libQt5Widgets.so.5.7.1
616420 Aug /usr/lib/libQt5XcbQpa.so.5.7.1
154556 Aug /usr/lib/libQt5Xml.so.5.7.1
https://jira.digi.com/browse/DEL-4644
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Busybox's init enabled at build time collide with 'sysvinit' package.
This does not seem a problem when using RPM package manager, but using
IPK instead, the build is broken at image creation time:
Collected errors:
* check_data_file_clashes: Package sysvinit wants to install file <...>/rcS
But that file is already provided by package * busybox
https://jira.digi.com/browse/DEL-4573
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No applet has been enabled or disabled, just the defconfig file has been
refreshed for the current busybox version 1.24.x
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NetworkManager manages the 'resolv.conf' file globally, so there is no
need for pppd specific scripts for DNS.
These scripts race with NM to set DNS, leading sometimes to a scenario
where you have ethernet as the default gateway, but with DNS only
reachable via cellular.
While on it, also remove not used 'mm_cellular' configuration file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some modems (e.g. the XBee Cellular LTE Cat 1) have a long initilization
process and are not available when ModemManager tries to detect them
on boot.
For those modems schedule a rescan a bit later after NetworkManager has
been launched, so they are detected properly.
https://jira.digi.com/browse/DEL-4661
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These values configure the PPP daemon to check that the connection is
still alive (using an echo) and kill itself otherwise. On that event,
NetworkManager takes over and tries to restore the connection.
This is specially useful for modems with only one serial port, because
they are not able to signal the connectivity loss to the host (the only
data channel is used for the network data itself).
https://jira.digi.com/browse/DEL-4653https://jira.digi.com/browse/DEL-4650
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Use the 1.8.x stable series, as it has some desired functionality (e.g.
connectivity check) and bug fixes over the default version included in
Yocto.
https://jira.digi.com/browse/DEL-4628
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name of the repository in Github is fixed, because it is a fork from
the original repository.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This commit includes the Python3-Json package that is required now
by QT creator python scripts when debugging an application with GDB
on the target.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
For P2P interfaces, some drivers (CC6UL) create auxiliar interfaces based
on the parent one, like p2p-p2p0-0.
This commit adds a p2p* pattern to the list of unmanaged devices so that
NetworkManager doesn't try to manage P2P devices.
https://jira.digi.com/browse/DEL-4649
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The removed distro features are mostly corner cases, not widely used,
and sometimes conflict with other packages serving the same purposes.
For example:
* '3g' only adds ofono for cellular support, while we are
using ModemManager.
* 'nfc' adds 'neard' the NFC daemon (which at the moment we don't
support)
* 'zeroconf' adds 'avahi' package, but we are using NetworkManager
instead to manage the network interfaces.
* 'nfs' adds 'rpcbind' server, which is not needed at all to have
an NFS mounted rootfs.
Needless to say that all those packages can be added to any image
without having the distro features enabled, or if preferred, you can add
the distro features back in the project's local.conf.
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As we are using kernel's DEVTMPFS, using udev-cache on top of it does
not add much advantage. Disabling it has the extra advantage of avoiding
writing the udev-cache tarball under '/etc' (which probably won't work
on a read-only system).
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the point this script is running from udev (the system log is not yet
available), so to avoid debug messages from qualcomm wireless module
reduce the console log level.
https://jira.digi.com/browse/DEL-4570
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When bringing down the wireless interface used for hostapd, the messages
overlap:
# ifdown wlan1
Stopping HOSTAP Daemon: stopped /usr/sbin/hostapd (pid 569)
hostapd.
Adding the 'quiet' option to start-stop-daemon command fixes the
cosmetic issue.
# ifdown wlan1
Stopping HOSTAP Daemon: hostapd.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is required to be able to use the whole RootFS partition which is
512 MiB in the 0x04 CC6UL SOM variant.
The old value only allowed to manage partitions of up to 256 MiB, this new
value allows for up to 1 GiB (assuming 128 KiB erase block size).
https://jira.digi.com/browse/DEL-4567
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
As the platform data is only separated by spaces, the data is assigned
to the incorrect variable:
ccardimx28js variants: -
ccardimx28js targets: e w wb web web1 dey-image-qt
After this commit:
ccardimx28js variants: - e w wb web web1
ccardimx28js targets: dey-image-qt
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Jose Diaz de Grenu
Mike Engel
Javier Viguera
Hector Palacios
Arturo Buzarra
Isaac Hermida
Alex Gonzalez
Sebastian Pastor