Remove the TF-A specific toolchain from SDK generation to avoid build issues
caused by unresolved runtime library dependencies in nativesdk-gcc-aarch64-none-elf,
including libcrypt.so.1, libncursesw.so.6, libpython3.8.so.1.0, and
libtinfo.so.6.
https://onedigi.atlassian.net/browse/DEL-10022
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The meta-st-stm32mp layer for OpenSTLinux v6.2 introduces the flag
ENABLE_PARTITIONS_IMAGE to generate per-partition images. This breaks the build
for DEY platforms, so disable it by default.
https://onedigi.atlassian.net/browse/DEL-10021
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the virtual OP-TEE syntax for the CCMP1 and CCMP2 platforms
to align with the changes introduced in the meta-st-stm32mp layer. Specifically,
it mirrors the update made in commit ded46c7d24addf91ec81c9f64309e6376689977a
("Adapt to virtual optee changes").
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Adds support for signing and encrypting Cortex-M firmware on STM platforms,
following the STM32 MPU Ecosystem v6.1.0. This update enables secure boot of
co-processor binaries on ConnectCore MP2, enhancing firmware protection.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit disables the signing and encryption mechanism for the ConnectCore
MP2 platform's co-processor firmware. Currently, this functionality is not yet
supported in DEY, and enabling it causes build failures when TrustFence support
is active. Disabling it ensures successful builds until full support is
implemented.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the Digi custom .bbappend recipes for FIP and TF-A to align
with the latest ST BSP release, based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.06.11
tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
IMAGE_FSTYPES was declared on each platform config file, but it has the
same values for all platforms depending on the storage media (mmc or mtd)
and whether read-only is enabled.
Move the conditional weak assignment to digi-default.inc and remove it from
each platform config.
In the case of STM platforms, since IMAGE_FSTYPES is weak-assigned by STM
layer, we still need to append/remove from it inside the platform config,
but move it to the family includes, rather than declaring it on each
specific platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
ALSA_LIST variable is weakly set through an override (stm32mp1common or
stm32mp2common). When the override is in place, the hard assignment of
the plain variable is not enough, and the value weakly set in
meta-st-stm32mp layer takes precedence over the plain variable hard
assignment.
Clear the variable with the override and move it from machine config files
to the include file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit integrates optee-client support from the meta-st-openstlinux layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.03.19 tag.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces the necessary settings for the kernel-fitimage class to
enable FIT image generation.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The FIP flavor for OP-TEE + USB is managed in the meta-st-stm32mp layer through
the "optee-programmer-usb". However, since we do not require the additional
overhead introduced by the STM32CubeProgrammer tool, this commit introduces a
new FIP configuration based on OP-TEE for booting from USB.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When ST_OPTEE_DEBUG_TRACE=0, the source code default to a LOG_LEVEL=2
which prints a lot of messages on the boot log.
Reduce it to LOG_LEVEL=1.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We tested all tarball compression formats supported by poky, and although bz2
has faster (de)compression time, xz is better in terms of compression ratio:
for all of the rootfs tarballs generated for our currently supported
images/platforms (15 at the moment), the xz format saves an average of 30 MiB
per tarball compared to bz2, totalling up to 450 MiB.
No extra dependencies are pulled in, since xz-native is already being pulled in
for all of our image builds, so the only drawback to this change is the
increased compression time (+7.34s on average per tarball).
https://onedigi.atlassian.net/browse/DEL-9459
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit clears the Cortex-M33 applications list to prevent including all
the Cortex-M33 demo applications from the ST layer. In the future, if we have
custom Digi examples, they should be added here.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
.ext4 files are identical to .ext4.gz, but uncompressed. .tar.xz files are the
exact same as .tar.bz2, but compressed with a different format.
Remove these artifacts to reduce storage overhead and to match the rest of our
platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes kernel headers from the SDK package list to prevent
overwriting the default ones, as there are currently no ST-specific headers
required.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the default FIP generation variables to align with the
common stm32mp2 configuration files from the latest meta-st-stm32mp layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0
(Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the gcnano recipes integrated into meta-digi, as a new
version (v6.4.19) has been released in the latest ST BSP, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated OPTEE-OS recipes and synchronizes the Digi custom
.bbappend with the latest v4.0.0 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated TF-A recipes and synchronizes the Digi custom
.bbappend with the latest v2.10 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These are files for programming images with STM32CubeProgrammer tool. We don't
use the tool or the files. Disable the task to avoid build warnings, just like
we do for the ccmp1 platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Arturo Buzarra
Hector Palacios
Gabriel Valcazar
Mike Engel