CCIMX6UL's rootfs partition is not big enough for the default
'dey-image-qt' image. This commit reworks the QT5 and SATO installed
packages for the ccimx6ul, so the image fits in the rootfs partition.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul does not have a GPU, so opengl based gstreamer sink will
not work. Thus apply the patch only for the CCIMX6.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This plugin uses directly the framebuffer, so it can be used in non
X11-based systems, but it oly supports software rendered content,
no opengl/es.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to build 'qtbase' for the CC6UL.
It only fixes the broken build, as any QT application that uses OpenGL/ES
will fail because there is no support for QT/OpenGL in modules without
a GPU.
Fix:
arm-dey-linux-gnueabi-g++ -march=armv7-a -mfloat-abi=softfp -mfpu=neon
--sysroot=/ssd/dey/jethro/fb/ccimx6ulsbc/tmp/sysroots/ccimx6ulsbc
-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -o opengldesktop
opengldesktop.o -lGL
.../arm-dey-linux-gnueabi/5.2.0/ld: cannot find -lGL
A similar commit was done in meta-fsl-arm.git (branch Krogoth).
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise they are overridden with config files from other layers (for
example meta-fsl-arm) that may not be valid for our platforms.
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add an empty calibration file to prevent the 'xinput_calibrator' tool
being launched on X11 desktop start.
The file does not have any calibration data because capacitive touch
displays usually do not need calibration.
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This file has not been synchronized with the one in Poky since previous
versions of DEY. Not much has changed, but sync it anyway.
Also:
* Get SHOWCURSOR from formfactor config files, but fallback to one
value depending on HAVE_TOUCHSCREEN if it was not configured.
* Rename the bbappend to the version generic '_%.bbappend'
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set of the World country code in the BDF file. It was lost after syncing to the
latest QCA BDF files (commit b80f00f14a).
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
U-Boot version dub-2015.04-r4.5 may report running on
Starter Board version 1 even when your Starter Board is
version 2. In that case Ethernet does not work in U-Boot.
More recent versions of U-Boot fix this issue.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* Check number of arguments
* Add platform argument
* Read user configuration from .config file
* Remove unused variable (dek_blob_size)
* Remove noise in output messages
https://jira.digi.com/browse/DEL-2688
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
When writing the fake IVT table in raw, rely on tac (part of the core-utils
package) instead of on xxd.
https://jira.digi.com/browse/DEL-2688
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Add a recipe to include all signing and encryption tools for U-Boot and
kernel images to the SDK. Move existing trustfence kernel scripts to this
new recipe.
This allows to use these scripts not only from the Yocto build system but
also as standalone tools for image signing and encryption.
https://jira.digi.com/browse/DEL-2688
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Copy of the original defconfig in hostapd-2.4 and enabling next options:
- CONFIG_LIBNL32
- CONFIG_EAP_PSK
- CONFIG_EAP_PWD
- CONFIG_WPS
- CONFIG_WPS_NFC
- CONFIG_RADIUS_SERVER
- CONFIG_IEEE80211N
- CONFIG_IEEE80211AC
- CONFIG_DEBUG_FILE
This means that the hostapd binary will have support for that features, but it
does not imply that the wireless chip does support it.
https://jira.digi.com/browse/DEL-2936
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This patch adds the functionality to automatically detect if the enviroment
is encrypted (through the device tree). If it is, the environment is encrypted
and decrypted as required in a transparent way for the user.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Add commented lines as example to configure and run the wlan0 interface in AP
mode using hostapd daemon.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not autostart hostapd daemon on boot because because it will conflict with
wpa-supplicant process and add a custom hostapd.conf file with WPA2-AES
encryption.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
https://jira.digi.com/browse/DEL-2925
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
APM is an ancient power management API mainly for x86. There is an
optional emulation layer for ARM, but none of our platforms is using
it, so just remove the machine feature.
https://jira.digi.com/browse/DEL-2745
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Instead of having one default image target for all platforms allow to
define this per platform.
This is needed because for example for the 'ccimx6ulstarter' we want to
define a default command line image instead of a QT-based one.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the warning message shows the TF variable setting in the correct
syntax that they should be written in the project's local.conf
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently we don't support booting encrypted images from an SDCARD, so
just disable the generation of such images.
https://jira.digi.com/browse/DEL-2876
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Add known issues for CC6UL.
* Refer to online documentation for interface and feature list.
* Add uSD encrypted image boot limitation.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
When TRUSTFENCE_SIGN is enabled, the u-boot binary for the SDCARD image
needs to be the "signed" one.
https://jira.digi.com/browse/DEL-2876
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Add trademark to TrustFence (TM) for consistency.
* Remove CC6UL non-wireless variant from supported products
* Added a note to check the online documentation for an updated known
issues and limitations list.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
According to 'grep' manual '\s' is a synonym for [[:space:]] which
matches spaces, TABs, but also newlines, etc. We want to only match
spaces and TABs, so use [[:blank:]] instead.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, on closed devices you cannot revoke any key. To do so, it is
required to compile a U-Boot which instructs the HAB not to set the sticky
bit which write protects that field in the OCOTP controller.
This patch introduces a Yocto macro which allows to configure U-Boot in
that way.
In the ConnectCore 6, the value of this settings is ignored, because HAB never
sets the sticky bit which write protects that field.
https://jira.digi.com/browse/DUB-665
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
* set cellular user and password
* stricter replace to not match set values
* only set cellular interface to auto
Internal merge of Github's PR:
https://github.com/digi-embedded/meta-digi/pull/2
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, on closed devices you cannot revoke any key. To do so, it is
required to compile a U-Boot which instructs the HAB not to set the sticky
bit which write protects that field in the OCOTP controller.
This patch introduces a Yocto macro which allows to configure U-Boot in
that way.
In the ConnectCore 6, the value of this settings is ignored, because HAB never
sets the sticky bit which write protects that field.
https://jira.digi.com/browse/DUB-665
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Javier Viguera
Hector Palacios
Isaac Hermida
Diaz de Grenu, Jose
Alex Gonzalez
Stephan Klatt