The modalias changed as part of the kernel update to version 5.15.
See commit dd545833b773b20aa7cec10f89bff96014ccb64f in kernel tree.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fixes a failure in the firmware installation script when trying to
program crank images:
./install_linux_fw_uuu.sh -i dey-image-crank
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.boot.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.recovery.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.ubifs'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the CC6UL 1GB flash variant, the programming of the rootfs exceeds
the current 90 secs timeout, giving following failure:
[Bulk(R):LIBUSB_ERROR_TIMEOUT] fb[-t 90000]: ucmd update rootfs ram ${fastboot_buffer} ${fastboot_bytes} -e
Error: Bulk(R):LIBUSB_ERROR_TIMEOUT
Increase the timeout to prevent the failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We don't want the FIPS version of wolfssl to be used by default, so
the recipe is configured as:
DEFAULT_PREFERENCE = "-1"
Unfortunately, DEFAULT_PREFERENCE has lower precedence than the layer
priority, so we need to put the recipe in a layer with priority less
or equal to the other layers having wolfssl recipes (meta-openembedded,
meta-wolfssl). This means in our case using 'meta-digi-arm' instead of
'meta-digi-dey', in which conceptually would fit better.
https://onedigi.atlassian.net/browse/DEL-8036
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Base recipe in Poky has been updated to that version, so we need to
update the bbappend to prevent a bitbake parsing failure.
NOTE: to review the patches once they are updated in
'meta-st-openstlinux'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale updated to version '10.0.0.imx', so our bbappend fails
with:
ERROR: No recipes in default available for:
... meta-digi-dey/dynamic-layers/freescale-layer/recipes-graphics/wayland/weston_9.0.0.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe downloads a tarball with the pre-built Crank engines for DEY
devices (http://log-sln-jenkins.digi.com/yocto/downloads/crank-sbengine-7.1.tar.gz):
* ConnectCore 8M Mini
* ConnectCore 8M Nano
* ConnectCore 8X
* ConnectCore 6UL
* ConnectCore 6
* ConnectCore MP1x
It installs the corresponding engine inside '/usr/share/crank/sbengine' and the
launcher script '/usr/bin/sb-launcher'.
https://onedigi.atlassian.net/browse/DEL-7969
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Required for some Crank engine libraries. They are linked against
'libts-1.0.so.0' instead of 'libts.so.0'.
https://onedigi.atlassian.net/browse/DEL-7969
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Required for some Crank engine libraries. They are linked against libwayland-egl
library without version, 'libwayland-egl.so'.
https://onedigi.atlassian.net/browse/DEL-7969
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As that's an old VM with limited specs, there is no much gain on using
it over the canonical Stash repositories that justifies the code
overhead and the possible errors due to synchronization problems.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The SRCREV may change depending on the version of the kernel, so it
cannot be a common variable for all kernel versions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the canonical Stash repository to avoid synchronization problems
between the repo and the mirror.
Moreover the LOG mirror is hosted in an old VM machine with limited
specs, and although the transfer of the objects is faster, the counting
of the objects to transfer (which is done in the server) takes ages to
complete, so at the end, there is no time gain using the mirror.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not needed anymore in our layer, as this has been fixed in meta-st-stm32mp.
This reverts commit 786e5c9e56.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Commit 8cba3aaefb in 'meta-freescale' changed the kernel_localversion
function we are using in our kernel recipe. This leads to a not-properly
configured kernel build, where CONFIG_MODULES is disabled. That
config option is needed to build external kernel modules in other
recipes, so those recipes (kernel-module-qualcomm, cryptodev-module,
etc) fail to build.
The commit makes sure the kernel is properly configured for building by
extending the do_configure function in a "prepend".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Building the wpewebkit recipe with more than 16 threads throws an unexpected
error "ninja: build stopped: subcommand failed.", so this commit limits it
to a safe value.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a cairo bbappend from meta-st-openstlinux layer to add support
to EGL and libgles2 graphical libaries.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
By default STM layer creates extra partitions, the vendorfs partition is
reserved to save custom STM libraries and binaries, however the ccmp15 platform
does not have this additional partition, and stores all the libraries in the
rootfs.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
gstreamer recipes was updated to v1.20.3 in poky layer, so this commit updates
the recipe version for custom bbappends.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
weston recipe was updated to v10.0.1 in poky layer, so this commit updates the
recipe version and refresh a custom STM patch.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Webkit version of the ConnectCore demo implements some new functionality:
- The COG browser is automatically started when the device boots loading the demo in the
primary display.
- A new Multimedia section is available to reproduce some demo videos and WebGL examples
in the device's browser.
Signed-off-by: David Escalona <david.escalona@digi.com>
The ConnectCore Demo is launched on startup and starts the web server. Demo can be accessed
by any computer in the LAN by just typing the IP address of the device in the web browser.
Signed-off-by: David Escalona <david.escalona@digi.com>
Javier Viguera
David Escalona
Tatiana Leon
Isaac Hermida
Arturo Buzarra