This is an atheros proprietary package that contains the athtestcmd and
wmiconfig applications.
Neither of them are currently used.
https://jira.digi.com/browse/DEL-1878
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Microcom is a minimal version of minicom and is extremely useful
for doing basic testing on target (for instance, talking to a modem
or other serial connected device).
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
(cherry picked from commit 90c6708e948c9b9942b48d425ff21e0affc2f8d7)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In yocto 1.8 if the BUILDNAME is empty, it gets filled with a timestamp
during the build. However the value and format of this timestamp are
different from the ones used in the name of the image.
This change matches the formats and values, setting the value of BUILDNAME
to the timestamp used in the name of the image.
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Which wireless module to use belongs more to the machine config files in
the BSP layer, than to the generic wireless packagegroup.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Duration (-d) option was broken.
cherry pick from 8f361d83cfcb39887f5fc591633e68d9448e3425.
https://jira.digi.com/browse/DEL-1828
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the networking configuration to support the creation of a bridge
interface.
Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com
This was used just for SARES testing and according to the SA team it is
not needed anymore, so just remove it.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
dependences for consistency
The GPIO and ADC examples are not meant for the mx6 familiy, so make their
dependences platform dependent
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
https://jira.digi.com/browse/DEL-1698
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
(cherry picked from commit 42997de56cf3f3943518e782332effad66965b21)
Conflicts:
meta-digi-dey/recipes-digi/dey-examples/dey-examples-bt.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-btconfig.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-can.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-hdp.bb
The external kernel module does not build with linux 3.14, and we want
to test the upstream driver included in the kernel tree.
So for the moment disable the external kernel module, to allow start
building images in the buildserver.
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now each platform is only supported in one kernel version, so there is
no need to have multiple calib files per linux kernel version.
https://jira.digi.com/browse/DEL-1747
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the following lines to add support for the HSP/HFP and A2DP profiles,
and to route the audio through the HCI SCO channel:
Enable=Source,Sink,Headset,Gateway,Control,Socket,Media
SCORouting=HCI
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Those packages are not machine specific, so there is no need to set
PACKAGE_ARCH to ${MACHINE_ARCH}.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This simplifies the code and as an extra allows to override the default
root password from the project's local.conf (setting MD5_ROOT_PASSWD
variable)
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Poky added a new class that provides the same functionality we
implemented in our 'dey-image' class. So just use that class instead
of reimplementing it in our layer.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove 'dey-test' image feature and create a SARES bbclass with the
same functionality. This makes easier the creation of images suitable
for SARES testing just adding:
INHERIT += "sares-image"
to your project's local.conf
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the patch because it's now included in wpa_supplicant v2.3
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now it depends on the last set capture mode which may be not compatible.
https://jira.digi.com/browse/DEL-1521
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Changes in Poky (Dizzy) made our SDK unable to build QT applications.
This commit syncs again with upstream so the toolchain is able to build
QT apps.
https://jira.digi.com/browse/DEL-1544
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add a Digi mirror for packages that have dissapeared upstream.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 0a01d3a5d0203d1ce75482677739bf0113da624d)
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 537803cb64809acbac243179d6d448ad6cd70b85)
Yocto 1.7 Dizzy added support for os-release file in a new recipe, so
we need to remove it from our base-files bbappend in order to avoid
conflicts between both packages.
https://jira.digi.com/browse/DEL-1390
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This can be used as a template for size optimized images. It constraints
the use of X11 related packages and the image types used.
To build, add the following to your conf/local.conf:
DISTRO_FEATURES_remove = "x11"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Also remove config entries in '/etc/network/interfaces' if corresponding
variable is not defined.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Alex Gonzalez
Paul Osborne
Jose Diaz de Grenu de Pedro
Isaac Hermida
Hector Palacios