Most of the support has been added to the meta-freescale layer, so
substitute our recipe for a .bbappend and redefine the tasks to build
U-Boot images for our two variants (1GB and 2GB).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Every task in this recipe is already supported in the same way in the
meta-freescale layer, so just keep the .bbappend file to select SRCBRANCH and
SRCREV.
The DDR patch can be removed since that source code is now included into the
SCFW project.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds support for U-Boot v2018.03 for CC8X platforms only.
Create 'digi-u-boot.inc' with the common definitions for both v2017.03
and v2018.03.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The device-tree being used on a system is a very important piece of
information to debug issues. On a host machine, dtc can be used to
reconstruct the DTS used from the /proc/device-tree folder structure.
While on it, remove extra white lines at the beginning and end.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Collects following changes:
- fix compatible string parsing: Only first compatible string
was being parsed from "/proc/device-tree/compatible"
while looking the device the application is running on.
https://jira.digi.com/browse/DEL-6436
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Add kernel module parameter to enable/disable the p2p interface.
By default p2p interface is disabled.
https://jira.digi.com/browse/DEL-6503
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script introduces a minor delay when the own script
launch the wpa_supplicant daemon, however this minor delay
is needed in the boot process when the wireless interface
is loaded, if not the bridge mechanism throws an unexpected
error trying to add the interface to the bridge before the
wireless is ready to use.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since our initscript contains logic to dynamically generate the path containing
the greengrass daemon (it changes depending on the version), keep it in the
rootfs. Create a symlink to it inside of /etc/init.d for sysvinit images and
create a systemd service wrapper that calls it on systemd images.
https://jira.digi.com/browse/DEL-6510
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Soften the dependencies between the services and start the bluetooth stack
regardless of the existence of a bluetooth chip. Also, update the standby
script to reflect that there is no longer a strong dependency between the
services.
https://jira.digi.com/browse/DEL-6452
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Unlike eudev, which is used on images without systemd, the list of paths
systemd-udev uses to look for rules is very limited. Include an upstream patch
(commit 116b91e8ccfee1d44fc2b140d831d688e3747902 in the systemd repo) that
expands said list.
This fixes an issue with crda's regulatory domain rule file, which was being
excluded due to it being in a path systemd-udev was ignoring (/usr/lib/udev).
Because of this, the regulatory domain was never set properly and hostapd was
failing when configured to use 5GHz channels (which is the default config).
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
To avoid bringing up interfaces before they're created by udev scripts
(specifically wlan1), wait until udev settles before starting the service.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When using systemd, putting the wlan1 interface up wasn't working because it
was relying on initscripts that are no longer in the filesystem.
Add a parametrized version of the upstream hostapd service to be able to use a
configuration that's different from the default one. Also, modify the
generation of the wlan1 entry in /etc/network/interfaces to be able to use
different post-up/pre-down hooks depending on the init manager that's being
used.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The naming of branches in the qcacld repository is now in the qca65x4
namespace.
Also, the qca6564/master branch now does not hardcode the TX MCS to 0 as
this change should only apply to the CC6UL and not other platforms like
the CC6+.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Update file:
- fakeboar.bin (f9f8dc905be5732525e0c9e8db7822f3)
This file was generated by calibrating several CC8X SBC Pro boards and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10005.1 on
qca6574au-le-2-2-1_qca_oem repo.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Device tree files no longer have the kernel type prefixed to their name, so the
trustfence_sign() function must be updated to reflect this change or else
errors will occur.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This version supports OpenSSL v1.1.0 by default, which is used in DEY 2.6.
Trying to build older versions of the package will result in failures, so
remove support for said versions entirely.
Our patches apply cleanly except for the hab4_pki_tree.sh automation patch,
which needs a small tweak so it can get applied over the latest version of the
script.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This change was added to meta-openembedded layer by commit
0814df2e9179b71b5f5c99b962aca35ede1f242f.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since the version 1.12, NetworkManager enables the colors in the
terminal output by default. This pretty output is not compatible
with several terminal emulators and makes it difficult to parse
the output of the CLI commands.
This patch uses the standard linux util called 'terminal-colors.d'
to disable the colors by default in the NetworkManager CLI interpeter.
https://jira.digi.com/browse/DEL-6473
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Latest update to version 1.29.3 in upstream breaks the compatibility
of our bbappend, to avoid it in future updates, this commit
generalizes the bbappend to apply all the 1.29 series.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add pulseaudio audio profile for MAX98089 sound card and
generalize the recipe to support multiple platforms with
the same audio sound card.
https://jira.digi.com/browse/DEL-6461
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The driver now builds directly from the kernel source and the
fixes are already included in the kernel tree so there is no need
to build the module externally.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6460
(cherry picked from commit a0990a7e1dcd03af239efb620b83b7dee126484e)
This is a user space tool to manage BATMAN advanced network interfaces.
https://jira.digi.com/browse/DEL-6466
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
systemd-tmpfiles throws warnings of /var/run being deprecated in favor of /run.
Even though this is corrected automatically, the warnings appear several times
during runtime, polluting the systemd journal.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The file 'manufacturing.xml' file in the manifests repository does not exist.
When building manufacturing artifacts, we must use the 'manufacturing/morty'
branch, that already contains the right repositories to clone.
For a manufacturing job, this commit only adds the 'meta-digi-mfg' if it is not
already there.
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
(cherry picked from commit 379ca469dff949e09c667d1a448012881b8812d2)
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Similar to what we did on sysvinit, stop dnsmasq from starting automatically
on boot so NetworkManager can launch it via dbus.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The postinst script tries parsing the wireless MAC address from the sysfs, and
in case of failure, obtains a random string from /dev/urandom. This caused two
problems when booting with systemd:
* The wifi interface's sysfs entry is not available because the interface
hasn't had time to start up yet, forcing the script to always resort to the
/dev/urandom fallback.
* Even though the postinst scripts are run after populating the volatile
filesystems (as can be seen in run-postinsts.service's dependencies), trying
to read either /dev/random or /dev/urandom at this point in the system's
initialization causes it to lock up indefinitely.
To avoid either situation, add the following changes:
* Immediately exit when running on a non-wireless target, as the script isn't
necessary in this use case.
* Parse the wireless mac address from /proc/device-tree/wireless, which is
guaranteed to always be available when the script runs. By doing this, we can
remove the /dev/urandom fallback entirely.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This script behaves the same way as our custom standby script, with a few
modifications, for example:
* instead of using initscripts to stop/start daemons, it uses systemctl calls
* save variables that are needed when resuming in /tmp, because the script is
executed twice instead of once (when suspending and when resuming)
* remove the locking/unlocking of the critical section and the actual state
change, since that is handled by systemd-suspend now
Also, add a different standby script for when systemd is enabled. Said script
acts as a wrapper for systemd's suspend mechanism.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In Yocto 2.6, this variable is null whenever systemd is enabled. Explicitly set
this variable to keep some necessary scripts in /etc/init.d.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These changes are needed in order to achieve a behavior similar to our
bluetooth initscripts'.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This service acts as a systemd replacement for our bluetooth-init initscript.
All it does is call the initscript before starting the bluetooth stack.
Since initscripts dissapear from /etc/init.d when disabling sysvinit, move the
script to /etc/. Also, include bluez5-init as a packagegroup-dey-bluetooth
dependency regardles of whether systemd is enabled or not.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches don't apply on the latest version of systemd used in Yocto 2.6.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without systemd, our KEY_POWER events were handled by the ACPI daemon, which in
turn issued a "poweroff" command. With systemd, the ACPI daemon is no longer
available and the events are handled by systemd-logind instead, which also
powers down the system properly. However, NXP added a patch that prevents
system-logind from handling the events, since they use the sc_powerkey instead.
Remove this patch to be able to power the target off via our power button.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, remove sysvinit and add pam, which is needed by weston+systemd.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, there will be errors due to missing dependencies.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These have been ported directly from NXP's meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since poky commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede
reboot config was moved to init.cfg to provide this configuration
when busybox is selected as the init manager, however it is needed
for initramfs images where no init manager is set (see poky commit
ef4a417ab04779bd9fc8a6540a20cca7d14e98cf).
https://jira.digi.com/browse/DEL-6451
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Fix write operation by moving the re-lock of the mmc partition
after performing the system synchronization, if not the mmc
driver throws read-only errors. Also, improved the code
to avoid compilation warnings because the return values were
not managed in write operations.
https://jira.digi.com/browse/DEL-6449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 4b41d9072a304fadbe1cc37c94575f12a2a47fd3 in poky
busybox removes the RRECOMENDS dependency with busybox-syslog,
then we need to explicitly add this dependency in the recipes.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bitbake was using the imx-atf recipe inside of meta-freescale instead of ours.
Said recipe was compiling a different tag, causing our kernel to stop loading
when using our generated imx-boot images.
Remove our .bb file and add a .bbappend that changes the source code revision
to the tag compatible with the rest of the imx-boot files.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree file names won't have the kernel image type like a
prefix anymore, since thud uses the original file names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Device tree names don't use KERNEL_IMAGETYPE as a prefix anymore,
since in this version, there are different variable names to generate
device tree files.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
KERNEL_IMAGE_BASE_NAME was replaced by KERNEL_IMAGE_NAME for
consistency between variable names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gonzalo Ruiz
Jose Diaz de Grenu
Hector Bujanda
Arturo Buzarra
Gabriel Valcazar
Alex Gonzalez
Hector Palacios
Tatiana Leon