The Replay Protected Memory Block (RPMB) is an special storage
partition that cannot be accessed via standard block layer.
When a user space tool like blkid, tries to read it the kernel
suffers buffer I/O errors and timeouts.
This commit modifies the post installation script to filter the RPMB
partitions from the mmc block devices, to avoid multiple kernel
errors during the script execution.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed the platform dependency to apply the resize to all platforms.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe is an example for customer for a system-monitor. Scripts that
verify the system status can be added to /etc/system-monitor.d
The recovery mechanisms can be implemented on those scripts or in the
system-monitor script. The software watchdog systemd support is used to
guarantee that the system-monitor is running.
When using this it is recommended to enable the systemd hardware watchdog
support, refer to the systemd documentation for this.
The systemd service provided by this recipe is not enabled by default as it
is an example that needs customization.
https://jira.digi.com/browse/DEL-6593
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Also create the folders that contain the scripts attending each
dispatch event type.
https://jira.digi.com/browse/DEL-6575
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe is an example for customer for a system-monitor. Scripts that
verify the system status can be added to /etc/system-monitor.d
The recovery mechanisms can be implemented on those scripts or in the
system-monitor script. The software watchdog systemd support is used to
guarantee that the system-monitor is running.
When using this it is recommended to enable the systemd hardware watchdog
support, refer to the systemd documentation for this.
The systemd service provided by this recipe is not enabled by default as it
is an example that needs customization.
https://jira.digi.com/browse/DEL-6593
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Also create the folders that contain the scripts attending each
dispatch event type.
https://jira.digi.com/browse/DEL-6575
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There's a recipe in the thud branch of meta-openembedded specifically for the
opencl-headers package, but it's also provided by imx-gpu-viv. This generates
build errors when parsing the recipes and when populating the sysroot for
opencv.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Make our vulkan sub-folder match NXP's by updating recipes, deleting ones that
are no longer needed and adding new ones. Also, stop forcing 1.0.65% as the
preferred vulkan version.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
The code revision is exactly the same as the one in v6.2.4.p2.3, so simply
rename the recipe and delete files that are not necessary anymore.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Instead of having one common .inc file and one .bb file per architecture,
we now have one common .bb file for both architectures.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The watchdog and ADC devices were not being modified to belong
to 'digiapix' group, so the examples did not run properly when
ran as a user different than root.
Reported-by: Andreas Burghart <andreas.burghart@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6581
This patch is included in the rocko and sumo branches of poky to avoid errors
when starting an xserver using DRI, but it was removed in the thud branch in
favor of newer input methods other than SIGIO. SIGIO is still supported, but
not explicitly in the xserver configuration.
Since the vivante driver on the i.MX6 is using DRI and, by extension, SIGIO
(even though there is no way to configure xserver to enable SIGIO support), the
only way to make xserver start correctly is by removing the SIGIO support check
in the code.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Even though systemd support is not yet available for these platforms, add the
scripts so bitbake doesn't fail when building the busybox package.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* Use the same operation order when resuming interfaces
* Remove unnecessary delay in ccimx6sbc standby script
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, bitbake will try building the aarch64 version of the package and
fail when building ccimx6 images.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The exported PWM channels now report the channel name under udev
EXPORT parameter.
Add the 'change' udev action type to the udev rules and use that
parameter to change the group ownership of the PWM channels to
digiapix group, so they can be used by non-root user.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For some reason, even though the general RDEPENDS for this package is correct,
all items are overwritten by the empty class-native version of RDEPENDS, even
when building for the target. Because of this, whenever this python module is
installed and used, it won't work.
Redefine the dependencies needed by the target until the issue is fixed
upstream.
https://jira.digi.com/browse/DEL-6553
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some modems take a lot of time to initialize and ModemManager won't
see them on its first scan.
This service will force a rescan 40 seconds after boot, to give
enough time for those lazy modems.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
This recipe adds a script and a related systemd service that
configures two GPIOs (user defined, or else platform-defaults) as
output and sets them to the appropriate value for initializing the
XBee socket:
- XBEE_SLEEP_RQ: is set low, for running the XBee
- XBEE_RESET_N: is set low and then high, to reset the XBee
The service triggers on the condition that the UART TTY device node
pointed to by variable XBEE_UART exists.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
On the default device tree, the MCA UART that's connected to the
XBee socket is enabled. This registers as ttyMCA0.
Add a udev rule for this path so that ModemManager checks for
modems in this serial port.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
With the re-organisation of the python3 packaging, some of the
packages have disappeared and are now part of base packages.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Otherwise, packagegroup-dey-core won't get included in ccimx6ulstarter images.
This packagegroup contains fundamental OS elements, such as sysvinit, kernel
modules and so on. Use CORE_IMAGE_BASE_INSTALL instead and make sure to append
to the default value instead of overwriting it.
https://jira.digi.com/browse/DEL-6536
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For CC6/CC6Plus
- Add USER_LED0 alias (same as default USER_LED)
- Change aliases of the other LEDs to USER_LED1 and
USER_LED2 (without additional underscore and fixed
indexes, to match the board schematics)
For CC8X SBC Pro
- Add USER_LED0 alias (same as default USER_LED)
- Add USER_LED1 which was missing
- Increase indexes (due to removed MCA_IO19 on SOM v3)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This modifies the behavior of the sd-resolve libsystemd component to prevent
the system from freezing whenever a service that uses said component is
stopped. Even though this doesn't free the terminated thread's resources
properly, this procedure only gets executed during the final moments of a
service's process before it exits, so resource leaks aren't an issue.
https://jira.digi.com/browse/DEL-6523
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the following examples that were accessing
hardware interfaces:
- dey-examples-adc
- dey-examples-can
- dey-examples-gpio-sysfs
- dey-examples-spidev
- dey-examples-watchdog
The recipe 'dey-examples-digiapix' builds similar examples that make
use of Digi's APIX for accessing the hardware. Add this recipe to images
- dey-image-qt
- core-image-base
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5169
This reduces the number of files that must be modified when changing
branches between development/release modes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Organize the common code in the recipe to make easy the
inclusion of new greengrass versions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This way, the wlan1 interface will only be created whenever a user wants to
bring the interface up with ifupdown. Modify the script to be able to delete
the interface whenever it gets brought down and remove its .sh file extension
so run-parts can run it properly during the ifup process.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Tests have shown that having this interface up hinders wlan0's performance,
so don't bring it up by default.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update u-boot-fw-utils patches to apply on current upstream version. Remove
recipe for version 2017.09 since both U-Boot v2017.03 and v2018.03 work fine
with the newer version.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version is only required to build U-Boot 2017.X, so select it as preferred
version only on those platforms that build this U-Boot (CC6 and CC6UL).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The device-tree being used on a system is a very important piece of
information to debug issues. On a host machine, dtc can be used to
reconstruct the DTS used from the /proc/device-tree folder structure.
While on it, remove extra white lines at the beginning and end.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This script introduces a minor delay when the own script
launch the wpa_supplicant daemon, however this minor delay
is needed in the boot process when the wireless interface
is loaded, if not the bridge mechanism throws an unexpected
error trying to add the interface to the bridge before the
wireless is ready to use.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since our initscript contains logic to dynamically generate the path containing
the greengrass daemon (it changes depending on the version), keep it in the
rootfs. Create a symlink to it inside of /etc/init.d for sysvinit images and
create a systemd service wrapper that calls it on systemd images.
https://jira.digi.com/browse/DEL-6510
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Soften the dependencies between the services and start the bluetooth stack
regardless of the existence of a bluetooth chip. Also, update the standby
script to reflect that there is no longer a strong dependency between the
services.
https://jira.digi.com/browse/DEL-6452
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Unlike eudev, which is used on images without systemd, the list of paths
systemd-udev uses to look for rules is very limited. Include an upstream patch
(commit 116b91e8ccfee1d44fc2b140d831d688e3747902 in the systemd repo) that
expands said list.
This fixes an issue with crda's regulatory domain rule file, which was being
excluded due to it being in a path systemd-udev was ignoring (/usr/lib/udev).
Because of this, the regulatory domain was never set properly and hostapd was
failing when configured to use 5GHz channels (which is the default config).
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
To avoid bringing up interfaces before they're created by udev scripts
(specifically wlan1), wait until udev settles before starting the service.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When using systemd, putting the wlan1 interface up wasn't working because it
was relying on initscripts that are no longer in the filesystem.
Add a parametrized version of the upstream hostapd service to be able to use a
configuration that's different from the default one. Also, modify the
generation of the wlan1 entry in /etc/network/interfaces to be able to use
different post-up/pre-down hooks depending on the init manager that's being
used.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This change was added to meta-openembedded layer by commit
0814df2e9179b71b5f5c99b962aca35ede1f242f.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since the version 1.12, NetworkManager enables the colors in the
terminal output by default. This pretty output is not compatible
with several terminal emulators and makes it difficult to parse
the output of the CLI commands.
This patch uses the standard linux util called 'terminal-colors.d'
to disable the colors by default in the NetworkManager CLI interpeter.
https://jira.digi.com/browse/DEL-6473
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Latest update to version 1.29.3 in upstream breaks the compatibility
of our bbappend, to avoid it in future updates, this commit
generalizes the bbappend to apply all the 1.29 series.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add pulseaudio audio profile for MAX98089 sound card and
generalize the recipe to support multiple platforms with
the same audio sound card.
https://jira.digi.com/browse/DEL-6461
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The driver now builds directly from the kernel source and the
fixes are already included in the kernel tree so there is no need
to build the module externally.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6460
(cherry picked from commit a0990a7e1dcd03af239efb620b83b7dee126484e)
This is a user space tool to manage BATMAN advanced network interfaces.
https://jira.digi.com/browse/DEL-6466
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
systemd-tmpfiles throws warnings of /var/run being deprecated in favor of /run.
Even though this is corrected automatically, the warnings appear several times
during runtime, polluting the systemd journal.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Similar to what we did on sysvinit, stop dnsmasq from starting automatically
on boot so NetworkManager can launch it via dbus.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The postinst script tries parsing the wireless MAC address from the sysfs, and
in case of failure, obtains a random string from /dev/urandom. This caused two
problems when booting with systemd:
* The wifi interface's sysfs entry is not available because the interface
hasn't had time to start up yet, forcing the script to always resort to the
/dev/urandom fallback.
* Even though the postinst scripts are run after populating the volatile
filesystems (as can be seen in run-postinsts.service's dependencies), trying
to read either /dev/random or /dev/urandom at this point in the system's
initialization causes it to lock up indefinitely.
To avoid either situation, add the following changes:
* Immediately exit when running on a non-wireless target, as the script isn't
necessary in this use case.
* Parse the wireless mac address from /proc/device-tree/wireless, which is
guaranteed to always be available when the script runs. By doing this, we can
remove the /dev/urandom fallback entirely.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This script behaves the same way as our custom standby script, with a few
modifications, for example:
* instead of using initscripts to stop/start daemons, it uses systemctl calls
* save variables that are needed when resuming in /tmp, because the script is
executed twice instead of once (when suspending and when resuming)
* remove the locking/unlocking of the critical section and the actual state
change, since that is handled by systemd-suspend now
Also, add a different standby script for when systemd is enabled. Said script
acts as a wrapper for systemd's suspend mechanism.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These changes are needed in order to achieve a behavior similar to our
bluetooth initscripts'.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This service acts as a systemd replacement for our bluetooth-init initscript.
All it does is call the initscript before starting the bluetooth stack.
Since initscripts dissapear from /etc/init.d when disabling sysvinit, move the
script to /etc/. Also, include bluez5-init as a packagegroup-dey-bluetooth
dependency regardles of whether systemd is enabled or not.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches don't apply on the latest version of systemd used in Yocto 2.6.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without systemd, our KEY_POWER events were handled by the ACPI daemon, which in
turn issued a "poweroff" command. With systemd, the ACPI daemon is no longer
available and the events are handled by systemd-logind instead, which also
powers down the system properly. However, NXP added a patch that prevents
system-logind from handling the events, since they use the sc_powerkey instead.
Remove this patch to be able to power the target off via our power button.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, there will be errors due to missing dependencies.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These have been ported directly from NXP's meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since poky commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede
reboot config was moved to init.cfg to provide this configuration
when busybox is selected as the init manager, however it is needed
for initramfs images where no init manager is set (see poky commit
ef4a417ab04779bd9fc8a6540a20cca7d14e98cf).
https://jira.digi.com/browse/DEL-6451
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 4b41d9072a304fadbe1cc37c94575f12a2a47fd3 in poky
busybox removes the RRECOMENDS dependency with busybox-syslog,
then we need to explicitly add this dependency in the recipes.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove git recipe to use the official 1.8.2 release and update
udev rules file to blacklist the network interfaces that ModemManager
must not manage.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 491082c56ce34f3fd644f8d4457ccd52af951087 in poky layer enables
by default some security enhancements and optimizations for the compiler,
These extra checks added by the flag -D_FORTIFY_SOURCE=2 break the
CloudConnector build. This commit disables the extra validations only
for the CloudConnector recipe.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed patches already integrated in the OpenSSL code and
refreshed the necessary ones.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Wireless tools is deprecated in favor of iw because the
wireless extensions have been deprecated in favor of the
new nl80211 interface for wireless devices.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The defconfig file has been refreshed for the current busybox
version 1.29.2 maintaining the same applets enabled.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script was added a long time ago and it never gets used anymore, so remove
it from our images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The point of this recipe is to provide the version of Bluez5 that was
certified. Thes certification does not apply to the ConnectCore 8X, and the
recipe currently fails to build due to missing files. Hence filter out the
ConnectCore 8X from this recipe.
This clears the following warnings:
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry bluetooth-init: file could not be found
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry main.conf: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit bf9688fd08ac9e8823a5a253bdd1acacd1c0870e)
Trustfence is not supported in the CC8X at the moment. This cleans the
following warning:
WARNING: meta-digi/meta-digi-dey/recipes-core/trustfence/trustfence-initramfs.bb: Unable to get checksum for trustfence-initramfs SRC_URI entry trustfence-initramfs-init: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 778fc424274fc0983c348f4da6ca09e1a7b5b859)
vpx was wrongly removed when updating the recipe to version 1.14, but it's
required to build x11 images for the ccimx6ulsbc.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 1e2244afcd)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
CC8X SBC Pro's LPUART0 port is routed to the Expansion connector.
The UART located in the XBee socket, MCA UART, is not currently supported
so comment the XBee Cellular rule for the moment.
https://jira.digi.com/browse/DEL-6417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The defconfig file has been refreshed for the current busybox
version 1.27.x maintaining the same applets enabled.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In 92c49b9b1a16dfd35444db8143bd4cae4cda70cc was introduced the LAYERSERIES_CORENAMES
and LAYERSERIES_COMPAT_<layername> with the intention of allowing layers
to indicate which versions of the core project they're compatible with.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
qt3d sometimes fails to build due to an upstream issue that has yet to be
resolved. Since this interferes with our daily builds from time to time, remove
qt3d from our images completely.
https://jira.digi.com/browse/DEL-6348
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
SOM v1 is not going to be released, so there's no need for a revision check.
Now that hw flow control is available, use it along with the highest baudrate
possible.
This reverts commit e4fbba3dde.
https://jira.digi.com/browse/DEL-6254
Our current OpenSSL libraries are only functional when applications link
against v1.0.2d or higher, making some packages containing pre-compiled
applications that link to older versions (like AWS Greengrass) fail to build
and/or run properly.
This commit includes:
* Changing SHLIB_EXT from so.1.0.2 to so.1.0.0
* Reverting the version-script to an older version with backwards
compatibility plus newer symbols
Specifically, these changes partially revert the patches added in the poky
layer's commits a59bfd05d15085a3dc5669b47fd19867246c846b and
73a43fc15e0463c39baaadecab78fb3ef51b8cd0 respectively.
Please note that this only modifies the cryptographic library's ABI, its code
remains unchanged.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their BSP support is
currently unavailable.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Digi vendor kernel uses a dedicated HCI UART driver with support for
In-Band Sleep (IBS). This driver, when used with a QCA vendor ROME plugin
for hciattach, is able to upload a new firmware version to the Bluetooth
chipset, as well as set the MAC address directly on the firmware.
Mainline BSP uses the HCI H4 driver instead and the "qualcomm" hciattach
plugin which is not able to upload firmware to the QCA6564 chipset.
As such, when using mainline the chipset uses the ROM firmware and the
bluetooth init script has been adapted accordingly.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The meta-freescale layer assumes that when you define the use-mainline-bsp
the platform is going to use the etnaviv gpu driver. This is not the case
for the CC6UL as the mxsfb.c driver is still not DRM capable.
Probably this will change in v4.19 as there is a DRM capable mxsfb.c
driver that will make it possible to use the armada xf86 driver with the
etnaviv fbdev emulation.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
* Check for file before using it
This just avoids the failure, on mainline access to OTP would need to be
done differently, see:
https://jira.digi.com/browse/ACL-163
* Use compatible node instead of digi,machine,name
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 4d35d15fee)
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
During the merge of the maintainance branch and the manual revert of
some recipes, these were forgotten.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The generate_installer_zip() function had a hardcoded "u-boot" filename when adding
the bootloader to the list of files that are put in the installer .zip.
https://jira.digi.com/browse/DEL-6174
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Set a lower baudrate of 115200bps for bluetooth on SOMv1 since
hardware flow control is not available.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
These packages create dependency issues when compiling framebuffer images, and
they aren't essential. Include them only in ccimx6 images.
This reverts commit 2edb127d28.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The sources for this package do not exist anymore, causing the build to fail
unless said sources can be obtained via a mirror.
https://jira.digi.com/browse/DEL-6147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Currently, it isn't possible to wake up the ccimx8x after suspending to RAM.
For now, use the less strict "freeze" low power mode instead.
https://jira.digi.com/browse/DEL-6148
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe's contents are unchanged, but the version number in the recipe name
will now match the rest of the vivante-related recipes.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The package is now available for download on NXP's mirror, so we can fully sync
our recipe with the one in meta-fsl-bsp-release.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also remove our .bbappend, since it's not needed anymore after updating our
machine overrides.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These packages are required for videos to play properly on the ccimx8x. Also,
add gstreamer1.0-libav explicitly since the only package that depends on it
(gst-player-bin) was removed from packagegroup-core-x11-sato.
https://jira.digi.com/browse/DEL-6026
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is done in meta-fsl-bsp-release when building xwayland images, so port it
to our layer.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This updates our Qt5 packagegroup with all of the packages included in NXP's
fsl-image-qt5-validation-imx.bb.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This merges our Qt5 recipes with the ones in meta-fsl-bsp-release.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These recipes update Qt5, its plugins and adds wayland support.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some of these recipes might not be strictly necessary for xwayland to work, but
they are related, so I have added them just in case.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
vpx was wrongly removed when updating the recipe to version 1.14, but it's
required to build x11 images for the ccimx6ulsbc.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The newer version used for the ccimx8x has a different license, so its checksum
must be changed.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package depends on libg2d, and the latest version of this library's
sources for imx6 platforms are currently unavailable. Among other things, the
newer sources add a symbol needed by imx-gst1.0-plugin to compile, so this
patch manually adds the symbol as a macro in the package's source code.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The aarch32 recipe will remain the same for now, since the newer sources aren't
yet available in NXP's mirrors.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The most important change here is the package's revision.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used by NXP in the rocko-4.9.88-2.2.0_8qxp_beta2 branch of
their meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6078
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We now have different tarballs for each CPU architecture we compile for. Also,
add support for the aarch64 tarball.
https://jira.digi.com/browse/DEL-6046
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their SOM support is
currently unavailable.
https://jira.digi.com/browse/DEL-6049
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Display Processing Unit (DPU) on the i.MX8 is what NXP used to call
Image Processing Unit (IPU) on the i.MX6 family.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 15139a3e97 wrongly removed 'vpx' from plugins-good which
is needed to play WebM files on the CC6UL.
The packagegroup-dey-gstreamer also needed to be updated to use
'pulseaudio' from plugins-good which was apparently renamed from 'pulse'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
(cherry picked from commit 29add13409)
adc_sample:
- extend list of supported devices with MCA_CC8X
adc_cmp_sample:
- Add '-t' argument to specify the type of device.
- Added checking of threshold ranges to avoid confusion between
raw and voltage configurations.
https://jira.digi.com/browse/DEL-6001
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Commit 15139a3e97 wrongly removed 'vpx' from plugins-good which
is needed to play WebM files on the CC6UL.
The packagegroup-dey-gstreamer also needed to be updated to use
'pulseaudio' from plugins-good which was apparently renamed from 'pulse'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
- For most examples, since they apply to all platforms, remove
COMPATIBLE_MACHINE.
- For recipes related to specific hardware, add support to the new platform
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
While on it:
- add dey-examples-rtc unconditionally (rtc is never in MACHINE_FEATURES)
- add missing recipes: digiapix, cryptochip
- re-order them alphabetically.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit:
- moves the files in platform folders 'ccimx6qsbc' and 'ccimx6ul' to the
recipe's folder (they are the same).
- moves the install instructions for virtual wlan and wlan1 into functions
that can be reused by both platforms.
- moves the bridge example install instruction to the generic do_install()
since it's the same for all.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 15139a3e97 removed all gstreamer plugins recipes
but NXP meta-fsl-bsp-release still contains .bbappends that
this commit re-adds.
Besides, the imx-gst1.0-plugin recipe contained a patch by Digi
that was also wrongly removed and that this commit re-adds without
the version on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
meta-freescale rocko branch now sources gstreamer and its plugins
from repositories in codeaurora that contain all patches, so these
recipes are no longer required in meta-digi.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
(cherry picked from commit 105ab7a89b)
Commit 105ab7a89b removed all gstreamer plugins recipes
but NXP meta-fsl-bsp-release still contains .bbappends that
this commit re-adds.
Besides, the imx-gst1.0-plugin recipe contained a patch by Digi
that was also wrongly removed and that this commit re-adds without
the version on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
This is taken from meta-fsl-bsp-release layer at branch 'rocko-4.9.88-2.0.0_ga'
at SHA1 d65692ecb3a4.
A *.bbappend is required to explicitly set COMPATIBLE_MACHINE.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
- These have been taken from meta-fsl-bsp-release layer at branch
'rocko-4.9.88-2.0.0_ga', SHA1 d65692ecb3a4.
- Old recipes have been removed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
meta-freescale rocko branch now sources gstreamer and its plugins
from repositories in codeaurora that contain all patches, so these
recipes are no longer required in meta-digi.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6029
- The variable containing the list of patches has been renamed to a more
generic prefix QCA65XX_.
- The ConnectCore 8X uses GPIO3_10 (394) for BT_EN.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
This is taken from meta-fsl-bsp-release layer at bb80ba5a0104.
The file had a few commented lines for Wayland that have been uncommented
to leave them untouched in the commit.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5937
The commit 32a6e809f811e8b3920326330d8225b3dd895f70 from the poky layer
breaks the build in the maintenance branch for rocko. This patch updates
the curl base recipe to use the latest version.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The commit 32a6e809f811e8b3920326330d8225b3dd895f70 from the poky layer
breaks the build in the maintenance branch for rocko. This patch updates
the curl base recipe to use the latest version.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Digi Embedded Yocto 2.4-r1.2
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Arturo Buzarra
Jose Diaz de Grenu
Javier Viguera
Gabriel Valcazar
Francisco Gil
Hector Palacios
Gonzalo Ruiz
Alex Gonzalez
Mike Engel
Hector Bujanda