ConnectCore 8M Mini has support to VPU but the library used is different than
the used by the i.MX6 processors. This recipe manages the required libraries
to operate with this kind of VPU.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Required for the release rel_imx_5.4.70_2.3.0 based on zeus
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update the MACHINE values with the ones in meta-freescale and meta-imx layer.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Cortex-M4 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Mini DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Both ConnectCore 8M platforms share the same U-Boot build process,
so apply the same changes for them.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When manually changing the partition table, it could happen that
a UBI volume already exists in the 'update' partition.
If not erased, the system may find the old UBI volume (with wrong
geometry information) and try to mount it which will result in
failure.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On commit 1e5cafeb79 a fall-back
update command was introduced in case the newest command fails.
If the newest command succeeds, however, the 'test' command for
error doesn't match (there is no error) and the return code of
such test is "1". On the next check for errors, this results on
an error, when we really mean to continue because the first
command was successful.
Move the second error check inside the error path of the first
attempt.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
In order to revoke SRKs in platforms with AHAB we need to set a mask
during the signing/encryption process.
Create new TRUSTFENCE_SRK_REVOKE_MASK variable to export the
SRK_REVOKE_MASK variable required by the imx-boot signing script.
The revoke mask is not necessary for signing/encryption of other artifacts,
so set it by default to 0x0.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add support to sign and encrypt OS artifacts for AHAB devices.
https://jira.digi.com/browse/DEL-7371
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 'source file system' was removed as an argument from the
'update' command in U-Boot v2020.04.
For platforms using such version, remove it from the update fw
scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-983
This command isn't essential and might not be available on all systems, so
remove it. Use the "oflag=sync" dd parameter instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
A similar change was done in the dey-3.0/maint branch for the uSD installation
scripts, but since USB scripts were added in dey-3.0/master, apply the same
to them as well.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since this component pulls in Optee dependencies, which in turn depend on
packages from meta-python2, add this layer to the ccimx8mn-dvk's default
bblayers.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-7025
Since there is only 1 supported version of cst, the include file is
only used once.
Move all the recipe implementation to the *.bb recipe and remove the
*.inc file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Since cst-3.3.1 is now distributed with a BSD-3-Clause license, it is allowed
to distribute its source code from the Digi FTP.
Fetch the tarball from that location.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
CC8X SOMs code the RAM size on the OTP bits so this fall-back table
shouldn't be necessary, but update it with latest variants just
in case.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This machine was not building the 512MB 16bit U-Boot.
While on it, and for consistency, re-order to make the 2GB 32bit
the default (same as the SBC Pro), since the SBC Express was
discontinued as a product.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7363
Add Compliance Test Limits (CTL) information for FCC, CE and TELEC
certifications to the CC8MN US Board Data File.
The rest of the file (calibration, target power levels, etc.) remains
intact.
Updated file:
- bdwlan30_US.bin (MD5SUM: f9600f7bf4d601494b9bbe1ccbe94d6a)
https://jira.digi.com/browse/DEL-7359
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
CST was being built linking to the openssl libcrypto library from the host.
When the openssl version in the host didn't match the version in the SDK,
the SDK build failed like this:
Error:
Problem 1: package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Problem 2: package nativesdk-packagegroup-qt5-toolchain-host-1.0-r0.0.x86_64_nativesdk requires nativesdk-packagegroup-sdk-host, but none of the providers can be installed
- package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Fix that by adding the native dependencies include and lib folders to
the CST build. Also add openssl-native as a dependency for the SDK build,
otherwise it wont link to the SDK libcrypto library.
Additionally, to allow running CST in a host machine where the openssl version
does not match the version in the SDK, libcrypto library is statically linked.
https://jira.digi.com/browse/DEL-7346
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a95b3ad602)
CST was being built linking to the openssl libcrypto library from the host.
When the openssl version in the host didn't match the version in the SDK,
the SDK build failed like this:
Error:
Problem 1: package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Problem 2: package nativesdk-packagegroup-qt5-toolchain-host-1.0-r0.0.x86_64_nativesdk requires nativesdk-packagegroup-sdk-host, but none of the providers can be installed
- package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Fix that by adding the native dependencies include and lib folders to
the CST build. Also add openssl-native as a dependency for the SDK build,
otherwise it wont link to the SDK libcrypto library.
Additionally, to allow running CST in a host machine where the openssl version
does not match the version in the SDK, libcrypto library is statically linked.
https://jira.digi.com/browse/DEL-7346
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Create scripts to install DEY firmware using a USB stick.
https://jira.digi.com/browse/DEL-6802
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Mike Engel
Hector Bujanda
Arturo Buzarra
Hector Palacios
Gonzalo Ruiz
Gabriel Valcazar
Francisco Gil Martinez