A patch sent upstream has been finally merged so this commit is not
needed anymore.
This reverts commit 6a66656161.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
module-udev-detect blocks the sound interface on boot for about five
seconds while detecting the hardware. This patch removes it so that
module-detect is used instead, which uses static hardware detection and is
faster.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Move this variable to DEY distro conf so that it is available for any
recipe built with the distro.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
There is another OpenGL demo application QT5 Hello Windows for testing
purposes.
https://jira.digi.com/browse/DEL-2184
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has been observed that the wireless interface ocassionally fails to resume
from suspend on extensive long run validation testing, so we workaround it by
bringing the interface down before suspend and bring it up again after resume
This reverts commit a77cd1406d.
https://jira.digi.com/browse/DEL-2217
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This image provides a demo rootfs with QT. It can be built for
framebuffer and also for X11.
https://jira.digi.com/browse/DEL-2196
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We were masking meta-fsl-arm linux recipes to clean some warnings on
bitbake parsing. This does not happen anymore with new versions of
Yocto, so just remove this BBMASK.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This install the 'obexd' server which is needed for the QT5 bluetooth
file transfer example applications.
https://jira.digi.com/browse/DEL-2147
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Generalize bluetooth support so it can be used not only with bluez4 but
with bluez5 as well. Use EXTRA_QMAKEVARS_PRE to pass the packageconfig
options to the do_configure task.
https://jira.digi.com/browse/DEL-2147
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a user-space workaround for the reboot/poweroff problems we
are having in the ccimx6sbc. Seems that they are not reproducible when
only one core is enabled, so the workaround is to disable the rest of
the cores for rebooting/halting.
https://jira.digi.com/browse/DEL-2133https://jira.digi.com/browse/DEL-2148
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit a9e36a74bb20ab38f220116ba2742dca3d80c293)
Also initialize the video sink to 'glimagesink' in case it has not been
configured from the environment, but only for the X11 application
(gtk-play). This recipe also provides a command line application for
framebuffer (gst-play) that is not affected by this change.
https://jira.digi.com/browse/DEL-2132
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The example applications are not packaged by default, so extend the
recipe to create a package with the example applications.
https://jira.digi.com/browse/DEL-1960
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The script toggles the BT power GPIO regardless of the value being
undefined.
Check that the GPIO is defined before trying to toggle it.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The BT power GPIOgpio was determined basing on machine name on device tree.
This corresponds to the name of the board, and might be changed by a user
that designs his own carrier board to use the module on.
Besides, the BT power GPIO is a pin that's routed on the module (both on
the ConnectCore 6 and on the ConnectCard for i.MX28) not on the carrier
board.
This commit determines the BT power GPIO basing on the module string inside
the 'compatible' property. This must exactly match the module name and is
a required property for using Digi module's BSP.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2109
So we can build a 'dey-image-graphical' image for framebuffer with
support for QT5.
https://jira.digi.com/browse/DEL-2017
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No functional change, as 'package-management' is added via the included
dey-image-minimal recipe, and 'pointercal-xinput' is a dependence of
xinput-calibrator which is added for X11 images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default QT5 applications use 'xcb' platform plugin but this can be
changed using the QT_QPA_PLATFORM environment variable. On non-X11
images the 'xcb' platform plugin obviously does not work, so just
configure 'eglfs' for non-X11 images.
https://jira.digi.com/browse/DEL-2017
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are some demo apps that otherwise fail with:
QSqlDatabase: QSQLITE driver not loaded
QSqlDatabase: available drivers:
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This demo app is very generic and does not play well with FSL gstreamer
plugin, so using it just crashes in different ways (doing a camera zoom,
recording a video, etc)
This reverts commit 2776dcd654.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We will use 'qmlvideo' application for QT5 media player demo, so just
create a desktop launcher.
https://jira.digi.com/browse/DEL-2007
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These demo applications are only distributed in binary form. We don't
have the source code as an example for customers, so just remove them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The aim is to reduce even more the memory used by the host at build time
to avoid the OOM killer killing the linker.
Otherwise it can fail in machines with few memory even though the linker
is configured with '--no-keep-memory'.
Notice that we also reduce the parallel jobs expanded by 'ninja' build
system configuring and exporting NINJAFLAGS variable. Otherwise this
build system does not honor PARALLEL_MAKE variable.
Fix:
arm-dey-linux-gnueabi-g++: internal compiler error: Killed (program cc1plus)
ninja: build stopped: subcommand failed.
https://jira.digi.com/browse/DEL-1973
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The autotools class is trying to execute:
intltoolize --copy --force --automake
so there is a intltool-native dependency.
Fix:
run.do_configure: intltoolize: not found
ERROR: Function failed: do_configure
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The meta-qt5 layer provides a 'populate_sdk_qt5' class with all what's
needed to build a SDK based on an image recipe.
Inherit the class here so it's available for all DEY image recipes
depending on 'dey-qt' image feature.
https://jira.digi.com/browse/DEL-1973
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This distro feature adds a lot of dependences when building a
toolchain/SDK (maininly all the *-ptest packages but some more). One of
those dependences fails when building the toolchain:
warning: Removing procps-3.3.10-r0.1@cortexa9hf_vfp_neon due to file /etc/sysctl.conf conflicting with base-files-3.0.14-r89.1@ccimx6sbc
error: procps-dev-3.3.10-r0.1 requires procps = 3.3.10-r0.1
There is no functionality loss because the 'ptest' packages are just a
sort of unit testing script for each package, and we are not testing all
the open source and third party packages.
https://jira.digi.com/browse/DEL-1973
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add BLUEZ5_NOINST_TOOLS to bluetooth packagegroup. Gatttool is
added to BLUEZ5_NOINST_TOOLS in bluez5.inc so it is not necessary
to add gatttooll to do_install_append function.
Signed-off-by: Urko Nalda <Urko.Nalda@digi.com>
Add support for bluez5 profiles under experimental flag.
Health Device Profile is an experimental profile.
https://jira.digi.com/browse/DEL-1936
Signed-off-by: Urko Nalda <Urko.Nalda@digi.com>
Adding these demo apps allows to install the base QT libs as well,
because they are resolved automatically by bitbake.
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is copied verbatim from the 'meta-fsl-bsp-release' layer. FSL
distributes these applications in binary-only form.
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise at run time there is no service available that is able to
manage the multimedia files and there is a failure:
requestService(): no service found for - "org.qt-project.qt.camera"
requestService(): no service found for - "org.qt-project.qt.mediaplayer"
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a build-time option, nothing to do with runtime. Decrease the
memory used by the linker to avoid being killed due to out-of-memory.
https://jira.digi.com/browse/DEL-1972
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the bluetoothd daemon is launched before the interface is ready
RFCOMM/L2CAP listening socket connections fail (apparently because
the channel is not ready) with BlueZ 5.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2042
We switch to the way it works in Android, short press (<2s) takes the target
to suspend and long press, >2s but <9s, performs a software controlled
power down.
Pressing longer than 9 seconds does the uncontrolled hardware power off
directly from the PMIC.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Patches from 'meta-fsl-bsp-release' branch 'fido_3.14.38_6UL_patch'.
https://jira.digi.com/browse/DEL-1992
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The suspend script did a ifup/ifdown on wlan0 to workaround issues we
had using wireless drivers on some platforms.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
yocto-2.0 (jethro) does not support bluez4 by default, it has been set
deprecated, but there is some functionality that does not work with bluez5
like bluetooth audio with alsa and some previous scripts like hdp.py are not
API compatible.
In order to compile a project with bluez4, just remove bluez5 from distro
features from your local.conf project.
DISTRO_FEATURES_remove = "bluez5"
https://jira.digi.com/browse/DEL-1943https://jira.digi.com/browse/DEL-995
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not include the btfilter support in the default images. Its support is
not required for bluetooth functionality.
https://jira.digi.com/browse/DEL-1935
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
btfilter (abtfilt) and bluetoothd are two independent services. Break the
relationship between them and split the support in independent init scripts
https://jira.digi.com/browse/DEL-1933
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The script was basing on the variant coded in the HWID to determine
if the variant had bluetooth, by comparing to an array of hard-coded variants.
This required the script to be updated with every new variant that supported
Bluetooth.
The patch checks instead if the node 'bluetooth' exists at all in the device tree
to determine if the variant supports Bluetooth.
https://jira.digi.com/browse/DEL-1933
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We want to unlink the script from abtfilt application, so moved to a different
recipe (that includes hciattach).
https://jira.digi.com/browse/DEL-1933
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The problem is the change of the default C standard from gnu89 to gnu11
which changes the semantics of 'inline'. The issue is described in the
porting guide at https://gcc.gnu.org/gcc-5/porting_to.html.
Fix based on u-boot's commit dfc9c24
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
It has a hard-coded dependence in bluez4 and this has been removed from
openembedded-core.
There is a different Jira for the bluez5 migration.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove QT4 phonon patches and qtmediaplayer demo as they depend on
gstreamer-0.10.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reverts commit f7e2e8bd2c.
FSL has updated this package to version v4.0.7 in meta-fsl-arm.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reverts commit d4fb6a238e.
The patch we were backporting to alsa-utils 1.0.28 is included in
alsa-utils 1.0.29 (which is used in Yocto 2.0).
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The mutex locking was not well resolved and a basic pipeline like:
gst-launch-1.0 playbin uri=file:///run/media/mmcblk0p5/big_buck_bunny_480p_h264.mov
was failing with:
Attempt to unlock mutex that was not locked
https://jira.digi.com/browse/DEL-1850
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The FSL gstreamer-0.10 plugin has renamed the video sink from
'mfw_v4lsink' to 'imxv4l2sink' so the phonon patches need to be updated
accordingly.
https://jira.digi.com/browse/DEL-1850
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an atheros proprietary package that contains the athtestcmd and
wmiconfig applications.
Neither of them are currently used.
https://jira.digi.com/browse/DEL-1878
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Microcom is a minimal version of minicom and is extremely useful
for doing basic testing on target (for instance, talking to a modem
or other serial connected device).
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
(cherry picked from commit 90c6708e948c9b9942b48d425ff21e0affc2f8d7)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In yocto 1.8 if the BUILDNAME is empty, it gets filled with a timestamp
during the build. However the value and format of this timestamp are
different from the ones used in the name of the image.
This change matches the formats and values, setting the value of BUILDNAME
to the timestamp used in the name of the image.
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Which wireless module to use belongs more to the machine config files in
the BSP layer, than to the generic wireless packagegroup.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Duration (-d) option was broken.
cherry pick from 8f361d83cfcb39887f5fc591633e68d9448e3425.
https://jira.digi.com/browse/DEL-1828
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the networking configuration to support the creation of a bridge
interface.
Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com
This was used just for SARES testing and according to the SA team it is
not needed anymore, so just remove it.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
dependences for consistency
The GPIO and ADC examples are not meant for the mx6 familiy, so make their
dependences platform dependent
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
https://jira.digi.com/browse/DEL-1698
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
(cherry picked from commit 42997de56cf3f3943518e782332effad66965b21)
Conflicts:
meta-digi-dey/recipes-digi/dey-examples/dey-examples-bt.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-btconfig.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-can.bb
meta-digi-dey/recipes-digi/dey-examples/dey-examples-hdp.bb
The external kernel module does not build with linux 3.14, and we want
to test the upstream driver included in the kernel tree.
So for the moment disable the external kernel module, to allow start
building images in the buildserver.
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now each platform is only supported in one kernel version, so there is
no need to have multiple calib files per linux kernel version.
https://jira.digi.com/browse/DEL-1747
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the following lines to add support for the HSP/HFP and A2DP profiles,
and to route the audio through the HCI SCO channel:
Enable=Source,Sink,Headset,Gateway,Control,Socket,Media
SCORouting=HCI
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Those packages are not machine specific, so there is no need to set
PACKAGE_ARCH to ${MACHINE_ARCH}.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This simplifies the code and as an extra allows to override the default
root password from the project's local.conf (setting MD5_ROOT_PASSWD
variable)
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Poky added a new class that provides the same functionality we
implemented in our 'dey-image' class. So just use that class instead
of reimplementing it in our layer.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove 'dey-test' image feature and create a SARES bbclass with the
same functionality. This makes easier the creation of images suitable
for SARES testing just adding:
INHERIT += "sares-image"
to your project's local.conf
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the patch because it's now included in wpa_supplicant v2.3
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now it depends on the last set capture mode which may be not compatible.
https://jira.digi.com/browse/DEL-1521
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Changes in Poky (Dizzy) made our SDK unable to build QT applications.
This commit syncs again with upstream so the toolchain is able to build
QT apps.
https://jira.digi.com/browse/DEL-1544
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add a Digi mirror for packages that have dissapeared upstream.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 0a01d3a5d0203d1ce75482677739bf0113da624d)
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 537803cb64809acbac243179d6d448ad6cd70b85)
Yocto 1.7 Dizzy added support for os-release file in a new recipe, so
we need to remove it from our base-files bbappend in order to avoid
conflicts between both packages.
https://jira.digi.com/browse/DEL-1390
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This can be used as a template for size optimized images. It constraints
the use of X11 related packages and the image types used.
To build, add the following to your conf/local.conf:
DISTRO_FEATURES_remove = "x11"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Also remove config entries in '/etc/network/interfaces' if corresponding
variable is not defined.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Allows to configure static DNS servers in resolv.conf setting following
variables in your project's config file:
ETH0_STATIC_DNS, ETH1_STATIC_DNS, WLAN0_STATIC_DNS
Those variables accept multiple dns servers (separated by spaces)
https://jira.digi.com/browse/DEL-1266
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the package manager postinst framework to run the rootfs resize
script on first boot after the image has been flashed to the EMMC.
https://jira.digi.com/browse/DEL-1317
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
microwindows makefiles override some environment variables set by
bitbake. This makes the build fail with:
fatal error: gnu/stubs-soft.h: No such file or directory
Force those variables by passing them via the make command line.
https://jira.digi.com/browse/DEL-1319
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP to support 'connmand' for dhcp.
* CONFIG_CTTYHACK to make easier boot from an initramdisk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No longer needed because a patch with the same functionality was
accepted upstream (meta-fsl-arm).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was added in the past (dey-1.4) as a workaround for reboot/poweroff
issues not completing properly [DEL-633]. At that time the util-linux
umount command worked while the one from busybox didn't. Now this
workaround is not needed anymore. The reboot/poweroff commands complete
correctly with busybox' umount, so just remove the runtime dependence.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is now needed in yocto 1.7. Otherwise it fails with:
ERROR: Please ensure recipe packagegroup-dey-gstreamer.bb sets PACKAGE_ARCH before inherit packagegroup
ERROR: Please ensure recipe packagegroup-dey-examples.bb sets PACKAGE_ARCH before inherit packagegroup
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This installs 'libbluetooth.a' in the toolchain (needed to build static
binaries that use libbluetooth).
https://jira.digi.com/browse/DEL-1303
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit f53ae4ab2af1bc5dd2f3f38f9d351d9eefd1f163)
Start the application with a well known rotation value that works with
all the resolutions. Otherwise the rotation value is unknown because it
could have been changed in a previous run of the application.
Also in the kernel driver support was added to report EINVAL to
user-space in case the requested rotation is not supported. We use that
to not return from the 'v4l2_rotate' function without enabling again
the overlay preview.
https://jira.digi.com/browse/DEL-1068https://jira.digi.com/browse/DEL-1205
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 2f7547a1b810683b813b708ba67e53ba156a9337)
The camera/driver does not support a cropping rectangle with height and
width less than 8 pixels. Add those limits to the sanity check of the
values in the user-space test application.
https://jira.digi.com/browse/DEL-1201
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to easily build QT applications sourcing the toolchain
environment setup script and then running:
$ qmake -project
$ qmake
$ make
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The adt-installer hardcodes the distro version in URL paths to
yoctoproject website. This is ok if you control the website and the
versioning of the distro (for example using Poky as distro).
In DEY the versioning is not compatible with the content of the website,
so just blacklist the recipe. If anyone needs the adt-installer they can
download it from the Yoctoproject.
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the 'mkimage' host tool to the toolchains generated with 'bitbake
meta-toolchain' or with 'bitbake -c populate_sdk <image>'.
This allows to use the standalone toolchain to build kernel images of
type uImage (with u-boot header)
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We used to have these poky references to make 'adt-installer' happy when
built using DISTRO=dey.
But this has side effects on the standalone toolchain created with
'populate_sdk'. The standalone toolchain installer has:
* default install path referring to poky instead of dey
* default toolchain version not matching our DEY version
This is misleading for customers, so rework the distro config file
prioritizing the standalone toolchain over the adt-installer.
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Jose Diaz de Grenu de Pedro
Hector Palacios
Isaac Hermida
Urko Nalda
Alex Gonzalez
Paul Osborne