New NXP's release is based on upstream v2.8. Use this only for ccimx93,
and keep using the previous Kirkstone release (based on upstream v2.6)
for the rest of the platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Implement a new mechanism to allow users to create update packages based on files and folders to modify
the active system.
This is done through the new class 'swupdate-files', which creates a tar.gz update file in the image
distribution output directory containing all the files and directories to create/update. The 'tar.gz'
file is used later by the 'swu-images' recipe to generate the final SWUpdate package. The SWU package
installation process extracts the tar.gz file in the root folder ("/") of the active system.
Users can specify the list of files and directories to include in the update package using the
'SWUPDATE_FILES_LIST' variable. These files will be directly copied from the generated system rootfs and
placed in the tar.gz archive. Additionally, users can provide their custom 'tar.gz' file to use in the update
by specifying its location in the 'SWUPDATE_FILES_TARGZ_FILE' variable. In any case, all the paths to include
in the update package must be relative to "/", as it is the base directory where tar.gz file contents are
extracted.
The update process for dual boot systems sets a new u-boot flag so that active bank is not swapped once
installation is complete and system reboots.
The SWU update mechanism based on files provides a custom update script which takes care of preparing the
system for the installation process. Just like in the SWU updates based on images, users can customize this
script or override it with the 'SWUPDATE_SCRIPT' variable, specifying the location of the new script to use.
If both the 'SWUPDATE_FILES_LIST' and 'SWUPDATE_FILES_TARGZ_FILE' variables are empty, a standard images
SWUpdate package will be generated instead.
Signed-off-by: David Escalona <david.escalona@digi.com>
Make the 'defconfig' file a real defconfig by including only differences with respect default
values. While on it, improve the recipe:
- Enable 'BOOTLOADERHANDLER' by default in the 'defconfig'. We were unconditionally setting
this value to 'y' in the recipe, so move it to the default configuration.
- Move 'UBI' configuration values to 'mtd.cfg' file to be added only when device filesystem is
MTD based. Until now, 'UBI' support was always added by default.
- Move the 'SIGNED_IMAGES' configuration entry to a '.cfg' file like we are doing with the rest
of the functionallity. Use 'oe.utils.conditional' checking 'TRUSTFENCE' feature for this.
Signed-off-by: David Escalona <david.escalona@digi.com>
Enable scripting support during the installation of system images with SWU. A new shell
script is included by default in all the SWU update packages that will be executed just
before the update starts and just after it finishes. The script is empty and contains two
place-holders that will be called in the two scenarios mentioned before.
Users can customize this script to execute specific actions based on their final product
needs or provide their own one by setting its location in the 'SWUPDATE_SCRIPT' variable.
While on it, rename the 'sw-description_template' file to 'sw-description-images_template'
as it is more accurate with the update mechanism it is used for.
Signed-off-by: David Escalona <david.escalona@digi.com>
This variable is not defined in ccmp1 platforms, making the
swupdate for single mtd failing.
Instead of reading this variable from uboot environment,
determine if the system is multimtd checking the existence
of /dev/ubi1.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We no longer need logic to determine the SOM's RAM size and bus width, we only
need to know the SOC revision, which is info that is always available.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now that both U-Boot and the SCFW can autodetect the RAM configuration, we can
simplify the imx-boot build process to generate two binaries (one per SOC
revision) instead of eight. Build "flash_spl" imx-boot images and use only one
global defconfig for u-boot.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This update includes automatic RAM configuration detection, and only one SCFW
binary is needed for all ccimx8x variants. Adapt the imx-boot recipe
accordingly.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Ensure we leave the Bluetooth interface up after attaching it. If not,
under some circumstances, it could be down.
https://onedigi.atlassian.net/browse/DEL-8608
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use our custom compile/install/deploy functions from DEY 3.2. NXP's imx-boot
recipe assumes only one U-Boot config and SOC revision, but we have multiple,
so we have to rewrite all of these functions.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For the ccimx8x, we changed the order of the steps in do_deploy() from:
Deploy -> Rename files -> Move binaries
To:
Deploy -> Move binaries -> Rename files
When it's time to rename the files, they won't be in their original place and
the process will fail. Make sure we move the files after they've been renamed
to avoid errors.
Also, one move operation is enough for all artifacts, so remove the second
operation.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Currenlty, the github FW version is a bit old and some functionality does not
work on latest IW61x batches.
Use this FW binary till it is released on github. This is required to
have WiFi and Bt working simultaneously.
0c6d454ea83b1a78b4e60df16f478f43 sduart_nw61x_v1.bin.se
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The default ethosu_firmware in github reconfigures the uart2 to be used as
debug port. Those pins are used to manage the HW flow control for the Bluetooth
chip.
Build a custom ethosu_firmware that does not reconfigure the uart2 pins.
Compiled from internal "ethos_u_firmware.git" repository on Stash,
with revision 48a4b9e6a0770212aac529fb7f81ed2e6ff51cbd
md5sum: 0bf8686fcabec7378483755106dc6433
https://onedigi.atlassian.net/browse/DEL-8587
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Backport from NXP's lf-6.1.1-1.0.0 release for the ccimx93 (meta-ml
layer).
This version of flatbuffers is needed for ethos-u-vela version 3.6.0
(backported in following commit).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The fact of including both storage types (mtd and mmc) in the same 'sw-description' file is not providing any kind
of benefit. Instead, it makes the file larger, complex and harder to maintain. Additionally, most of the images
entries share the same structure and contents, changing only names and mount points. This commit simplifies the
'sw-description' file by configuring the storage type and the images to include in the SWU package at build
time, using a generic 'sw-description' template and template files for 'mmc' and 'mtd' images.
While on it, use the new 'DEY_FIRMWARE_VERSION' variable for SWU package version and fix the recipe to not include
all 'SRC_URI' files in the SWU update image, but only the required files for the update. Also, make use of variable
substitution provided by SWU class in the 'sw-description' file.
Note: SWU U-Boot update will be broken after this change. Waiting for official support with a robust implementation.
https://onedigi.atlassian.net/browse/DEL-8537https://onedigi.atlassian.net/browse/DEL-8538
Signed-off-by: David Escalona <david.escalona@digi.com>
While on it, rename the old "Firmware" variable to "DEY version", as it refers explicity to the DEY
distribution version.
https://onedigi.atlassian.net/browse/DEL-8539
Signed-off-by: David Escalona <david.escalona@digi.com>
If 'CC_DEVICE_TYPE' is not defined or it is empty use 'MACHINE' as the device
type in the Cloud Connector configuration file.
This commit also limits its length to a maximum of 255 characters.
https://onedigi.atlassian.net/browse/DEL-8531
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
There are two different firmware files for Bluetooth on Murata's type2AE
module:
- JRL: It configures a Bluetooth TxPower of 7dB, to be used in Japan
only.
- FCC.CE: It configures a Bluetooth TxPower of 5dB, to be used in the
rest of the world.
To comply with the FCC requirement that it should not be possible to
configure different regulatory domains, or in this case configurations,
than FCC, only deploy the FCC.CE file by default:
- BCM4373A0_FCC.CE.hcd (md5sum: 1e287a3ab7f83e59352cb321315ea80f)
This file reports the following information during boot time:
Bluetooth: hci0: 89373 UART 37.4 MHz wlbga_BU sLNA muRata Type 2EA 5dBm 20220608-0103
Bluetooth: hci0: BCM4373A0 (001.001.025) build 0155
JRL file will be added via the Worldwide DEY patch addon that customers
can request from Digi.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The only user of 'linux-dey-src.inc' was the linux recipe itself, so
instead rename that file to a more generic 'linux-dey.inc' and include
more common code in that renamed file.
This is in preparation for the new linux 6.1.1 recipe for the ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove patch file "0001-Makefile-Suppress-array-bounds-error.patch"
for ccimx93, as it is already included in the lf-6.1.1_1.0.0 revision.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Weston is not launched in read-only filesystem because /home/root
is not a writable path.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Replace the CLM blob file from Github, which supports several countries
with a custom US-only CLM blob file. This way, default images will only
have support for US regulatory domain, therefore complying with FCC
requirements.
The Worldwide CLM blob file will be provided by Digi International on
request.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Javier Viguera
David Escalona
Francisco Gil
Gabriel Valcazar
Isaac Hermida
Tatiana Leon
Gonzalo Ruiz
Mike Engel