We no longer need logic to determine the SOM's RAM size and bus width, we only
need to know the SOC revision, which is info that is always available.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now that both U-Boot and the SCFW can autodetect the RAM configuration, we can
simplify the imx-boot build process to generate two binaries (one per SOC
revision) instead of eight. Build "flash_spl" imx-boot images and use only one
global defconfig for u-boot.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This update includes automatic RAM configuration detection, and only one SCFW
binary is needed for all ccimx8x variants. Adapt the imx-boot recipe
accordingly.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For the ccimx8x, we changed the order of the steps in do_deploy() from:
Deploy -> Rename files -> Move binaries
To:
Deploy -> Move binaries -> Rename files
When it's time to rename the files, they won't be in their original place and
the process will fail. Make sure we move the files after they've been renamed
to avoid errors.
Also, one move operation is enough for all artifacts, so remove the second
operation.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
There are two different firmware files for Bluetooth on Murata's type2AE
module:
- JRL: It configures a Bluetooth TxPower of 7dB, to be used in Japan
only.
- FCC.CE: It configures a Bluetooth TxPower of 5dB, to be used in the
rest of the world.
To comply with the FCC requirement that it should not be possible to
configure different regulatory domains, or in this case configurations,
than FCC, only deploy the FCC.CE file by default:
- BCM4373A0_FCC.CE.hcd (md5sum: 1e287a3ab7f83e59352cb321315ea80f)
This file reports the following information during boot time:
Bluetooth: hci0: 89373 UART 37.4 MHz wlbga_BU sLNA muRata Type 2EA 5dBm 20220608-0103
Bluetooth: hci0: BCM4373A0 (001.001.025) build 0155
JRL file will be added via the Worldwide DEY patch addon that customers
can request from Digi.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Replace the CLM blob file from Github, which supports several countries
with a custom US-only CLM blob file. This way, default images will only
have support for US regulatory domain, therefore complying with FCC
requirements.
The Worldwide CLM blob file will be provided by Digi International on
request.
https://onedigi.atlassian.net/browse/DEL-8453
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
We can't run a post installation script in a readonly file system.
We need to provide a configuration file beforehand.
https://onedigi.atlassian.net/browse/DEL-8556
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit modifies the boot script condition to apply the overlay for MCA
based on HWID MCA field.
https://onedigi.atlassian.net/browse/DEL-8521
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The tools STM32MP_KeyGen_CLI and STM32MP_SigningTool_CLI have
a dependency of libQt5Core.so.5 which is provided by qtbase.
Add this dependency to avoid errors during SDK generation.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For the moment, do not sign aditional artifacts, such as the ramdisk,
the kernel or the boot scripts for STM platforms.
In the specific case of the ramdisk, simply copy it over with the
expected filename extension.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The do_deploy:append did three things:
- adapt the U-Boot filenames to 'u-boot-<platform>-<config>.<ext>'
- sign/encrypt the U-Boot files (only for iMX6 family)
- sign the boot scripts
Convert the first two actions into functions (the third already was) and
call them conditionally as postfuncs.
Also skip the signing of U-Boot files if the platform is not based on
iMX6 family.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).
This is the case, for example, of:
- ccmp1 (family)
- ccmp15 (SOM)
- ccmp13 (SOM)
- ccimx8m (family)
- ccimx8mm (SOM)
- ccimx8mn (SOM)
Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe downloads a tarball that contains the binaries:
- STM32MP_KeyGen_CLI
- STM32MP_SigningTool_CLI
from ST Microelectronics STM32CubeProgrammer v2.12.0.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The name of the variable was not very intuitive of what
it contains. This variable expands to the SoC vendor
(NXP or STM).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 065cf3e9 ("kirkstone migration: general update to the new override
syntax") incorrectly renamed binaries in a massive change. This commit restores
the binary names to the original.
https://onedigi.atlassian.net/browse/DEL-8478
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These are recipes we created to support Google Coral on i.MX platforms. ST's
machine learning layer provides similar recipes, so to avoid conflicts, move
the recipes meant for i.MX platforms to a dynamic layer.
https://onedigi.atlassian.net/browse/DEL-8308
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The HWID is populated on the device tree by the boot loader.
This can be used as a key modifier when encrypting the U-Boot
environment. Some old U-Boot versions however, did not populate
the HWID on the device tree. When updating firmware from an
old version to a new one, the library may not be able to read
the HWID from the DT and then be unable to unencrypt the
environment.
This patch implements a fall-back function to read the HWID
directly from the nvmem node (sysfs). Implementation has been
done for ccimx6 family only, where this case of old U-Boot
can happen.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8444
(cherry picked from commit 222a91f213)
The HWID is populated on the device tree by the boot loader.
This can be used as a key modifier when encrypting the U-Boot
environment. Some old U-Boot versions however, did not populate
the HWID on the device tree. When updating firmware from an
old version to a new one, the library may not be able to read
the HWID from the DT and then be unable to unencrypt the
environment.
This patch implements a fall-back function to read the HWID
directly from the nvmem node (sysfs). Implementation has been
done for ccimx6 family only, where this case of old U-Boot
can happen.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8444
This commit modifies the boot script condition to apply the overlay for DVK v1
on boards without the board_version variable defined.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds an overlay for DVK v1 and modifies the boot script to apply it
based on the board_version variable.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Partitions 'fip-a' and 'fip-b' are redundant at the moment. They are
not currently part of the dualboot system. In consequence, program
both partitons unconditionally during the install process.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit updates the required firmware binaries for Bluetooth and Wireless
interfaces, based on the Murata release imx-kirkstone-fafnir_r1.0 that matches
with the Cypress Linux WiFi Driver (FMAC) release v5.15.58-2023_0222 (Wireless
firmware v13.10.246.300)
https://onedigi.atlassian.net/browse/DEL-8407
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set parameter 'greentxConfig__0_0=0x2' to use the optimal TxPower
in MCS7 data rates, improving performance.
Also, adjust maximum TxPower in the 5GHz band to account for
output power tolerances.
The new BDF is:
- bdwlan30_US.bin (53072f8af541a49e4ed9c22698b1912f)
https://onedigi.atlassian.net/browse/CC6UL-1302https://onedigi.atlassian.net/browse/DEL-8364
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Number of bootup logos is now configured using fbcon=logo-count parameter,
so use it instead of our deprecated custom code in the kernel.
For backwards compatibility, we add this parameter in the u-boot boot
script for all platforms but the ccimx93, where this is directly handled
by u-boot (v2022.04).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reverts commit 2bdfdc92e1.
This suffix was removed on error. The artifact does have the suffix.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Javier Viguera
Gabriel Valcazar
Isaac Hermida
Gonzalo Ruiz
Francisco Gil
Arturo Buzarra
Hector Palacios
Tatiana Leon
Mike Engel