This is a user space tool to manage BATMAN advanced network interfaces.
https://jira.digi.com/browse/DEL-6466
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
systemd-tmpfiles throws warnings of /var/run being deprecated in favor of /run.
Even though this is corrected automatically, the warnings appear several times
during runtime, polluting the systemd journal.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The postinst script tries parsing the wireless MAC address from the sysfs, and
in case of failure, obtains a random string from /dev/urandom. This caused two
problems when booting with systemd:
* The wifi interface's sysfs entry is not available because the interface
hasn't had time to start up yet, forcing the script to always resort to the
/dev/urandom fallback.
* Even though the postinst scripts are run after populating the volatile
filesystems (as can be seen in run-postinsts.service's dependencies), trying
to read either /dev/random or /dev/urandom at this point in the system's
initialization causes it to lock up indefinitely.
To avoid either situation, add the following changes:
* Immediately exit when running on a non-wireless target, as the script isn't
necessary in this use case.
* Parse the wireless mac address from /proc/device-tree/wireless, which is
guaranteed to always be available when the script runs. By doing this, we can
remove the /dev/urandom fallback entirely.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These changes are needed in order to achieve a behavior similar to our
bluetooth initscripts'.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This service acts as a systemd replacement for our bluetooth-init initscript.
All it does is call the initscript before starting the bluetooth stack.
Since initscripts dissapear from /etc/init.d when disabling sysvinit, move the
script to /etc/. Also, include bluez5-init as a packagegroup-dey-bluetooth
dependency regardles of whether systemd is enabled or not.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, there will be errors due to missing dependencies.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove git recipe to use the official 1.8.2 release and update
udev rules file to blacklist the network interfaces that ModemManager
must not manage.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed patches already integrated in the OpenSSL code and
refreshed the necessary ones.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Wireless tools is deprecated in favor of iw because the
wireless extensions have been deprecated in favor of the
new nl80211 interface for wireless devices.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The point of this recipe is to provide the version of Bluez5 that was
certified. Thes certification does not apply to the ConnectCore 8X, and the
recipe currently fails to build due to missing files. Hence filter out the
ConnectCore 8X from this recipe.
This clears the following warnings:
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry bluetooth-init: file could not be found
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry main.conf: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit bf9688fd08ac9e8823a5a253bdd1acacd1c0870e)
CC8X SBC Pro's LPUART0 port is routed to the Expansion connector.
The UART located in the XBee socket, MCA UART, is not currently supported
so comment the XBee Cellular rule for the moment.
https://jira.digi.com/browse/DEL-6417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
SOM v1 is not going to be released, so there's no need for a revision check.
Now that hw flow control is available, use it along with the highest baudrate
possible.
This reverts commit e4fbba3dde.
https://jira.digi.com/browse/DEL-6254
Our current OpenSSL libraries are only functional when applications link
against v1.0.2d or higher, making some packages containing pre-compiled
applications that link to older versions (like AWS Greengrass) fail to build
and/or run properly.
This commit includes:
* Changing SHLIB_EXT from so.1.0.2 to so.1.0.0
* Reverting the version-script to an older version with backwards
compatibility plus newer symbols
Specifically, these changes partially revert the patches added in the poky
layer's commits a59bfd05d15085a3dc5669b47fd19867246c846b and
73a43fc15e0463c39baaadecab78fb3ef51b8cd0 respectively.
Please note that this only modifies the cryptographic library's ABI, its code
remains unchanged.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Digi vendor kernel uses a dedicated HCI UART driver with support for
In-Band Sleep (IBS). This driver, when used with a QCA vendor ROME plugin
for hciattach, is able to upload a new firmware version to the Bluetooth
chipset, as well as set the MAC address directly on the firmware.
Mainline BSP uses the HCI H4 driver instead and the "qualcomm" hciattach
plugin which is not able to upload firmware to the QCA6564 chipset.
As such, when using mainline the chipset uses the ROM firmware and the
bluetooth init script has been adapted accordingly.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Set a lower baudrate of 115200bps for bluetooth on SOMv1 since
hardware flow control is not available.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- The variable containing the list of patches has been renamed to a more
generic prefix QCA65XX_.
- The ConnectCore 8X uses GPIO3_10 (394) for BT_EN.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Firmware verification has a side effect in cc6ul sbc express platform
that affects to the bluetooth initialization.
https://jira.digi.com/browse/DEL-5802
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Whenever there's a big time jump due to an outaded RTC being updated via NTP,
detect the jump and update the DHCP lease's expiry times accordingly.
https://jira.digi.com/browse/DEL-5233
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Rarely the bluetooth firmware is not loaded properly and causes
errors in the configuration steps. This verification makes sure
the firmware was loaded and is functional, if not we start the
retry mechanism with the default baudrate to avoid the firmware
corruption in the upload process.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Option --reference does not exist for busybox chmod/chown, so you get an ugly
error and file rights are modified.
https://jira.digi.com/browse/DEL-5642
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Bash v4.4 or higher warns when discarding NULL bytes in command substitution
output. Remove these bytes to avoid the undesired warnings.
https://jira.digi.com/browse/DEL-5588
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Currently the default bluez5 package installed is bluez-5.46, but we need this
locally for compiling bluez-5.41 (the stack using in the bluetooth
certification process), so we need to locally apply the same fix ("fix python3
core dependency for testtools") for the testtools and its dependency with
python3-code instead of python3.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Adding the bluetooth testtools does not have a big benefit and increases the
size of the rootfs in 16MB given its dependencies, which is critical in
devices (CC6UL) with a NAND flash.
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
There is not need to specify the testing flag for bluez5 compilation. That flag
is new starting at bluez5.44, and in the past it was called experimental. In
the past it made sense to pass that flag to compile specific services, but most
of them has been migrated to standard features, and experimental has been
renamed to testing, but we do not need any of those testing features.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
In bluez5.41 we needed to specify the "--experimental" flag when starting the
bluetooth service in order to use some specific features (see d434043447).
In bluez5.46 (in fact starting in bluez5.44) code was reorganized and now that
compilation option is called "--testing" but does not exist as flag, because
some of the "experimental" features has been mode to standard features, so
there is not need of indicating any extra flag when starting the service.
https://jira.digi.com/browse/DEL-5624
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Introspection support is currently broken upstream. It is only
used to generate the documentation, so it is safe to remove it.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Solves:
/bin/bash: line 1: glib-mkenums: command not found
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This is the stack covered by the Bluetooth certification. We will keep
it even though the newer bluez 5.46 will be used by default.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
* 'experimental' has been renamed to 'testing' in Bluez 5.44
* Several patches (0004..0011) are now upstream and can be removed
* QCA specific patches have been refreshed
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All this recipes only need to be renamed to the new version:
* cherokee
* curl
* imx-codec
* imx-gst1.0-plugin
* imx-parser
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Alex Gonzalez
Gabriel Valcazar
Arturo Buzarra
Jose Diaz de Grenu
Gonzalo Ruiz
Hector Palacios
Isaac Hermida