The XBee Cellular needs more time to settle down before MM is able to
detect it on boot. As this is connected to one of the 'ttymxc' serial
ports, use that port to conditionally delay the launch of MM.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding more retries to the port AT probing has an impact in modems not
using serial drivers (for example using qmi, mbim). It takes longer for
MM to detect those modems and then user space gives up waiting for the
modems to be available.
This reverts commit 682d77e414.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Pulseaudio 9.0 relies on the syscall memfd_create, which was introduced
in kernel 3.17, but the version currently supported for the CC6 SBC is
3.14.
There is a corner case where the configure script does not detect the
actual kernel version, thus enabling memfd_create. When Pulseadio tries
to call memfd_create, it shows error messages, so disable memfd
explicitly.
https://jira.digi.com/browse/DEL-3923
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
Added a post-installation script to disable the wireless interfaces on
module variants without wireless support.
This fixes following messages on boot:
wlan: driver load failure
modprobe: can't load module wlan (extra/wlan.ko): No such device
...
https://jira.digi.com/browse/DEL-3781
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This 'sed' command was used in the past, when DHCP or MANUAL was
configured in the '/etc/network/interfaces' (for cellular). This is no
longer true as we always configure the interface with a custom (manual)
script.
This was breaking the rest of interfaces when configured to use 'dhcp':
iface eth0 inet manual
umanualc_opts -S -b >/dev/null &
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Launching the MM on target's boot fails to detect the XBee cellular
because this needs more time to complete the initialization. So add some
more retries for the AT port probing to allow the XBee cellular to be
detected.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of redirecting the MM logging to '/dev/null' use a file, so we
can see what's going on in case of failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The flow control patches have been merged to the master branch, so
update the revision to remove those patches from our layer.
This reverts commit a7c51af5b8.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Sysinfo was showing error messages if the working directory contains any file
with .log extension.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This commit adds support to read the GPU reserved memory
from the DT.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3868
The recovery init checks if the configured update package exists and it is valid
before setting a new key and/or formatting the rootfs partition.
This change avoids getting non-booting devices after performing a firmware
update with a non-existing or invalid update package.
https://jira.digi.com/browse/DEL-3959
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
We have introduced new default configuration files for wireless that do
not show on sysinfo, so add them if they exist.
https://jira.digi.com/browse/DEL-3974
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
The XBee cellular support is at the moment only in modemmanager's git
repository (master branch).
Also remove one Telit patch from the bbappend because it's already
included in the git repo.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version of libqmi is needed for newer versions of ModemManager.
Remove bbappend and patch to previous version as the patch is now
included in the new version.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The current script cannot launch the hostapd twice (for dual HostAP mode)
because start-stop-daemon finds an already existing PID for hostapd after
running the first instance.
The solution is:
- Do not launch the hostapd in background (so that it does not fork the
process, which assigns a different PID)
- Use -b option of start-stop-daemon so that it launches the daemon in
the background.
- Let start-stop-daemon create the PID (since the hostapd will not fork
now this PID will match the hostapd process, allowing to kill it later)
This solution also hides the hostapd log messages that appeared before.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4045
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The original init script hardcodes the configuration file to use so it
cannot be re-utilized for concurrent AP/AP mode where two interfaces can
be used as SoftAP.
This commit uses the variable ${IFACE} to:
- select a specific configuration file per interface:
/etc/hostapd_${IFACE}.conf
- create a specific PID file per interface:
/var/run/hostapd.${IFACE}.pid
With this, the /etc/network/interfaces can use the script for using SoftAP
in different wireless interfaces.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
With the migration to Morty, some of the paths to the artifacts (boot
and rootfs images) need to be updated.
While on it, also remove the temporary README.txt file which is not
needed after it has been packed in the zip installer.
https://jira.digi.com/browse/DEL-4013
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- The Bluetooth daemon was always executed before setting up the
hardware, generating several problems specifically in the CCIMX6SBC.
This was causing the Bluetooth driver to override the Bluetooth name
and alias, as well as avoiding any host function on Bluetooth profiles.
Only pairing and ping was working, as well as client profile sides.
- This change also fixes some issues in the CCIMX6UL platforms with the
Bluetooth daemon failing to perform several bluetoothctl operations.
https://jira.digi.com/browse/DEL-4000https://jira.digi.com/browse/DEL-4015
Signed-off-by: David Escalona <david.escalona@digi.com>
- Some Python modules are no longer available in DEY-2.2 since
the official supported Python version is now 3. This caused the
HDP application to fail importing some of the old modules. For this
reason the sample application has been updated to use Python3
syntax and modules.
https://jira.digi.com/browse/DEL-3996
Signed-off-by: David Escalona <david.escalona@digi.com>
Print the HW and FW versions for the I/O Expander in the CC6UL SBC platform.
https://jira.digi.com/browse/DEL-3958
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
- The IVT table address inside the kernel image must be aligned at 0x1000
bytes. The calculation of this offset was not working when the kernel image
size was multiple of 0x1000 bytes. In this case the IVT table was moved an
extra offset of 0x1000 bytes, causing U-Boot to fail to validate the image
as the IVT table was not in the expected location.
This fix uses the same offset calculation algorithm as U-Boot, ensuring both,
the sign script and U-Boot will look for the IVT at the same address.
https://jira.digi.com/browse/DEL-3972
Signed-off-by: David Escalona <david.escalona@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Javier Viguera
Alejandro Navarro
Mike Engel
Alex Gonzalez
Sebastian Pastor
Salvador Penalva
Hector Palacios
Diaz de Grenu, Jose
Tatiana Leon
David Escalona