Do not install 'txpower' and 'rutxpower' files from the Murata repo,
which are used for the V1 TX power method, and replace them with custom
'rgpower' files, required for the V2 TX power method.
These files encode the TxPower limitations obtained during the
ConnectCore 93 Certification tests, and there is one file per supported
country. There is a common file for all the European countries, so
create links for each of them, based on the CEPT REC7003E recommendation.
New 'rgpower' files:
- rgpower_CA.bin (MD5SUM: 7c012351f0521a02e3d78615fed5eb54)
- rgpower_EU.bin (MD5SUM: 4d1a54b3c1f12a7d0bb44d0337786a0b)
- rgpower_JP.bin (MD5SUM: b7706bb2718997d933b2bdf1e53e64b4)
- rgpower_US.bin (MD5SUM: 16555f962b025e0426098decd0147f1f)
- rgpower_WW.bin (MD5SUM: 505223c56527e849d4b1e5800c8613b5)
Take the opportunity to just install bt_power_config scripts and prevent
the installation of other unused files (db.txt, ed_mac_ctrl_V2_nw61x.conf
and regulatory.db) from the Murata repository.
https://onedigi.atlassian.net/browse/DEL-8974
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The latest X-LINUX-AI v6.0.1 release consolidated the config_board_npu.sh
script across all STM32MP2x platforms with NPU support. As part of this
consolidation, the supported video resolutions were unified under a single
default setting, which does not work correctly with USB webcams.
This commit updates Digi’s custom patch to adjust the internal resolution used
for processing video streams from webcams, ensuring proper support and
functionality.
https://onedigi.atlassian.net/browse/DEL-9721
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since the release of X-LINUX-AI v6.0.1, AI support has been split between
devices with NPU and those relying solely on CPU. As a result, the Digi custom
patch to enable USB webcam support was no longer applied, because the
config_board_npu.sh script is now handled by the new config-npu.bb recipe.
This commit addresses the issue by introducing a new bbappend for config-npu,
ensuring that the webcam-related patch is correctly applied for NPU-enabled
platforms.
https://onedigi.atlassian.net/browse/DEL-9721
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit ac69566ecd mistakenly removed
the command of cc9, cc8x, and cc8m media installers that sets the
variable that contains the U-Boot file to install.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9720
At the point of saving the bootcmd for the second stage of the install
process we want to use the variable value, not the variable name
since this variable doesn't exist after the environment is reset.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9711
This commit enables building dey-image-flutter for the ConnectCore MP15
platform. It integrates the necessary configurations to support Flutter-based
graphical applications on this platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Systemd-based systems do not use the global /etc/sysctl.conf file. Instead,
they read configuration from individual files under /etc/sysctl.d. This
change installs our sysctl settings as /etc/sysctl.d/console.conf when
systemd is enabled.
For systems that do not use systemd, the configuration file is still
installed at /etc/sysctl.conf. The CONFFILES entry is also updated.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the existing uboot_deploy(_spl)_config function to clean up and rework
the symlinks created in the deploy directory.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
This gets substituted when TrustFence is enabled to "signed/encrypted"
or removed when TrustFence is disabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Programming an encrypted bootloader can only be done after the
secure keys have been programed on the OTP bits, and the device
has been closed. Programming on an open device would result in a
non-secure configuration or a non-bootable device after the
close operation.
Create functions to detect the current TrustFence status and exit
the install script if the device is open and the artifacts are
encrypted.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9699
The `-t` option to program images with TrustFence didn't make
much sense because the install script is dynamically generated
at build-time with the name of the boot artifacts containing
"signed/encrypted" on their filenames.
This commit:
- Removes `-t` option to simplify the script.
- Determines if programming a signed/encrypted bootloader by
looking at the bootloader filename.
- For NXP platforms, reworks the function that updates the
bootloader to properly program only-signed bootloaders (currently
wrongly using `trustfence update`)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
fix missing option to include the required kernel options for tsn support.
That support was added in commit 37f5db42ac for kernel 6.1, but it
was missed for kernel 6.6.
Add the support to include the required fragment, regardless the kernel
version.
While on it, update the tsn config to match kernel 6.6.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The vsftpd-cert init script was previously starting too late,
causing vsftpd to start before the certificates were generated.
The priority has been increased (to 70) so that vsftpd-cert
runs earlier during boot.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The default secure storage (/var/lib/tee) is a tmpfs and not persistent
across reboots. Change it to the data partition (/mnt/data/tee) when
TrustFence file system encryption enabled
For the log file, do use the /var/log/ directory instead of default
/data
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9683
Removed curl_%.bbappend which forced the use of ares over the default
threaded-resolver. We did this customization for NetworkManager long
ago in the context of network failover. Later we dropped it from NM,
but the customization in curl remained.
This saves approx. 100KB in the rootfs (libcares.so).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Disable GTK-based gstreamer player and connman network manager
* Remove matchbox-terminal to avoid pulling ICU
* Avoid pulseaudio client configuration to prevent duplicate instances
Also, delete the autospawn-for-root package config removal in our bbappend,
as that is not enabled by default in the recipe.
https://onedigi.atlassian.net/browse/DEL-9685
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As the OmniVision OV5640 camera is now deprecated and no longer supported by
most vendors, this commit moves its support to a separate Device Tree overlay,
allowing it to be used if needed.
Instead, the Sony IMX335 MIPI camera is integrated into the default device
tree as the default supported camera for the CCMP25-DVK platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
* Y2038: compile pulseaudio and alsa-lib with 64bit time flags
* Add patch to fix playback stuck issues on suspend/resume
https://onedigi.atlassian.net/browse/DEL-9681
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As of Yocto 5.0, Poky includes an equivalent solution for the Y2038 issue,
so drop the redundant code in meta-digi.
https://onedigi.atlassian.net/browse/DEL-9681
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Moved deploy_symlinks_atf from SYSROOT_PREPROCESS_FUNCS to do_deploy task
to ensure symlinks are created correctly even when rebuilding from the
shared state after a "bitbake -c clean tf-a-stm32mp".
Override do_deploy[sstate-outputdirs] from the original recipe to allow
installing both the deploy artifacts (binaries and symlinks) to the
package deploy directory.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the address where the fitImage is loaded after the addresses
where the binaries in it are decompressed. This way, the fitImage
can grow without size restrictions.
The memory map now looks like this:
0xC0000000 Start of memory
|
| (32 MiB)
v
0xC2000000 Kernel loadaddr ($loadaddr)
|
| (32 MiB)
v
0xC4000000 DTB/DTBO load address ($fdt_addr)
| (4 MiB)
v
0xC4400000 Init ram disk ($initrd_addr)
|
|
| (64 MiB)
|
v
0xC8400000 ZIP/fitImage address ($fit_addr_r)
|
~
|
v
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On the CCMP13 platform, the inclusion of pam_systemd in the PAM stack
causes excessive delays during login -close to 10 seconds- and can
even lead to SSH login failures.
Since we do not require per-user systemd services (--user), disable
the pam_systemd session module to improve login responsiveness.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
- The TF-A binaries now have ${BOOTSCHEME_DEFAULT} in them (optee or
opteemin)
- The FIP binaries now have ${BOOTSCHEME_DEFAULT}-sdcard in them
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9678
The login prompt appears before Wayland is fully initialized and
has created a wayland socket.
Logging in too early as root in this scenario caused the
WAYLAND_DISPLAY environment variable to be left empty. As a
consequence, gstreamer failed to use waylandsink to print contents
in the display.
Introduce a 10-seconds polling loop to wait for the wayland socket to
be available before proceeding with the login.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit enables SSL/TLS support in vsftpd, allowing FTP communications to
be encrypted for improved security.
SSL/TLS support is enabled by default, but to preserve compatibility with
clients that do not support encrypted connections, this feature can be disabled
at runtime. Users can simply comment or uncomment a few lines in the
`vsftpd.conf` configuration file to toggle the behavior.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The CC6UL SOM doesn't support booting from the SD card.
The STM based SOMs use a wic template to generate the SD card
image.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* Delete custom wolfssl_5.4.0-fips.bb recipe and README.
* Removed WolfSSL dynamic layer registration.
FIPS support is now managed through the external meta-wolfssl layer,
making this implementation unnecessary in meta-digi.
https://onedigi.atlassian.net/browse/DEL-9631
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new version in meta-wolfssl does build properly, so this append is
no longer needed.
https://onedigi.atlassian.net/browse/DEL-9631
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto added kernel local version support by using the KERNEL_LOCALVERSION
variable. It conflicts with the "fsl-kernel-localversion" class from
the meta-freescale layer, resulting in a duplicated local version in the
kernel release label (uname -r). Use the current Yocto support to avoid
that duplication instead of meta-freescale's class.
This enables further simplification of the 'copy_defconfig' task for NXP
and STM platforms using common code.
https://onedigi.atlassian.net/browse/DEL-9669
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
IMAGE_FSTYPES was declared on each platform config file, but it has the
same values for all platforms depending on the storage media (mmc or mtd)
and whether read-only is enabled.
Move the conditional weak assignment to digi-default.inc and remove it from
each platform config.
In the case of STM platforms, since IMAGE_FSTYPES is weak-assigned by STM
layer, we still need to append/remove from it inside the platform config,
but move it to the family includes, rather than declaring it on each
specific platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The generation of the sdcard image takes time and resources, and
it's not involved in the Get Started.
This can be easily re-enabled by appending the variable in the
project local.conf.
Append the variable in the build scripts, to facilitate its usage
on release builds.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This generates an installer.zip image with all the firmware
images, including install scripts for UUU, SD card, and USB.
This is helpful to share the artifacts with manufacturing
or for deploying to external media such as microSD or USB stick.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The HCI_UART Bluetooth driver does not support suspend-to-RAM operation, so the
driver must be loaded and unloaded manually. This commit adds support for the
Bluetooth initialization script used across Digi platforms, specifically for
ConnectCore MP13 and MP15.
https://onedigi.atlassian.net/browse/DEL-9650
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The USB and SD installers are U-Boot scripts that are practically
identical.
Merge them into a single template with a couple of machine variables that
determine the default device index in U-Boot for the USB or the microSD
card.
Do dynamic substitutions to create the two installers out of the template.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The installer uses the regular rootfs filename or falls back to search
for a squashfs (read-only) rootfs image.
The UUU installers of eMMC-based platforms use an if/elif/else structure
to determine which file exist (in order of preference). Replicate this
structure on the rest of platforms and installers.
This avoids printing an error message if the default rootfs does not exist
but the read-only one does.
Also, reset 'rootfstype' variable if the default rootfs file exists, which
allows to install regular images over a previous read-only system.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We reverted the stub that didn't allow PM when serial boot
was enabled on TF-A. Restore the part of the recipe that
includes USB boot support on NAND boot images.
This reverts commit 24aef482ef.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9629
Fixes commit b143804dbb, since in nativesdk
context MACHINE_FEATURES is reset to SDK_MACHINE_FEATURES, causing OP-TEE
building tools to be missing from the generated SDK.
https://onedigi.atlassian.net/browse/DEL-9663
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When you create a bridge between Wi-Fi hostap and Ethernet, it's more
convenient to let the bridge take an appropriate dynamic IP from the
DHCP server, than needing to configure a manual one.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Adding STM32MP_USB_PROGRAMMER=1 to TF-A NAND build allows the images to
boot from either NAND or USB (recovery) however, the source code of TF-A
disallows correct resuming from suspend when either STM32MP_USB_PROGRAMMER
or STM32MP_UART_PROGRAMMER are defined.
Remove this support so that the system can correctly resume from suspend.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9629
This commit fixes the rm command in the adapt_uboot_filenames function to
prevent build failures when the target artifact does not exist, ensuring the
operation is safe in all cases.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 29d32063ac0abb1017756f62f94aec22ce305b60 ("u-boot: kernel-fitimage:
Fix dependency loop if UBOOT_SIGN_ENABLE and UBOOT_ENV enabled") in Poky layer,
the `kernel-fitimage` and `uboot-sign` classes are no longer explicitly
dependent. This change introduced a race condition when inserting the signed
RSA keys into the U-Boot DTB for FIT image verification.
This commit introduces a new step for `do_uboot_assemble_fitimage`, which is
now responsible for injecting the keys into the U-Boot DTB. This logic was
previously handled in the Linux kernel recipe via the `do_assemble_fitimage`
function in previous Yocto versions.
Additionally, a build-time dependency is added between the `do_uboot_assemble_fitimage()`
function and the kernel's `do_kernel_generate_rsa_keys()` task, which is
responsible for generating the RSA keys used to sign the FIT image.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Starting with OP-TEE v4.0.0, the use of a test key is no longer supported.
The Hardware Unique Key (HUK) is now always derived from the programmed OTP bits.
As a result, the Digi custom `CFG_OTP_HUK` flag is obsolete and has been removed.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the memory layout to properly allocate space for the
different FIT image components, while ensuring total memory usage stays below
128 MiB. This avoids overlaps and ensures correct loading on memory-constrained
variants.
Final memory map:
Start of memory: # 0xC0000000
# |
# | 32 MiB reserved
# v
FIT image load address: # 0xC2000000
# |
# | 32 MiB for FIT image
# v
Kernel load address: # 0xC4000000
# |
# | 32 MiB for Kernel
# v
DTB/DTBO load address: # 0xC6000000
# |
# | Size for DTB/DTBO
# v
Total memory mapped: 96 MiB
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes a new tarball based on trustfence-fscrypt v0.2,
cross-compiled against libteec v1.0.0, to enable support for STM32MP1x platforms.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gonzalo Ruiz
Arturo Buzarra
Hector Palacios
Javier Viguera
Isaac Hermida
Francisco Gil