SERIAL_CONSOLES_CHECK is new functionality provided by Yocto, but it
needs '/proc/consoles' supported by the kernel. Our kernel 2.6.35 does
not support '/proc/consoles' so rework the serial console configuration
to work with both kernels (2.6.35 and 3.10).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The i.MX6 has an internal PMU with LDOs to supply voltages to the different
ARM sybdomains. There are two possible configurations, to use this internal
LDOs or to use the external PMIC to supply the voltages (LDO bypass).
The default is to boot with LDO bypass, and the device tree with the -dts
suffix will boot with the i.MX6 internal LDO.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
In Yocto 1.7 meta-fsl-arm replaced udev-extraconf bbappend with a new
package (udev-rules-imx). So we need to adapt our own bbappend to these
changes so all the needed udev rules are in place.
https://jira.digi.com/browse/DEL-1336
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We inherited from DEL the requirement to build more than one flash image
for the same rootfs contents depending on the EBS of the flash chip.
Yocto does not have support to generate more than one flash image so we
had to create functions in the image_types_digi bbclass to provide this
feature.
This commit removes that functionality and uses the standard yocto
support to generate ubifs and jffs2 flash images. The way to customize
the flash parameters is via EXTRA_IMAGECMD_jffs2 and MKUBIFS_ARGS
variables. In our case those variables are already set depending on the
different hardware variants.
https://jira.digi.com/browse/DEL-232
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for Dizzy maintenance branch.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The interfaces file is now dynamically created for eth0, eth1 and wlan0. By
default they are configured if enabled in the machine features, and have
the same static configuration as before.
The static IPs can be configured as follows:
ETHn_STATIC_IP = "<ip address>"
ETHn_STATIC_NETMASK = "<netmask>"
ETHn_STATIC_GATEWAY = "<gateway>"
WLAN0_STATIC_IP = "<ip address>"
WLAN0_STATIC_NETMASK = "<netmask>"
To configure dynamic IPs you can use the following configuration in your
local.conf:
ETHn_DHCP = "dhcp"
WLAN0_DHCP = "dhcp"
https://jira.digi.com/browse/DEL-1178
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will be the preferred version for ccardimx28. Then use platform
override to set the one for ccimx5 and ccimx6.
Not having a platform override in the machine config file allows to do
a simple version override in the project's local.conf file with:
PREFERRED_VERSION_u-boot-dey = "2009.08"
Otherwise, if we use a platform override in the machine config that
takes precedence over a normal override in the project's local.conf
and we would have needed something like:
PREFERRED_VERSION_u-boot-dey_ccardimx28 ?= "2013.01"
in the project's config.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
FSL has this enabled but in our case it fails to build for ccardimx28js
using linux 3.10 with error:
fatal error: linux/mxcfb.h: No such file or directory
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add platform family to SOC_FAMILY, so it's part of the MACHINEOVERRIDES
variable and it can be used to generalize bitbake recipes.
https://jira.digi.com/browse/DEL-1105
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for Daisy maintenance branch.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
While on it, rework and simplify atheros firmware recipe:
* remove 'unknown' version (renamed recipe)
* do not create empty debug and development packages
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was broken after the upgrade to Yocto 1.6 because the framework to
generate images in Yocto 1.6 changed.
https://jira.digi.com/browse/DEL-1032
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently Vivante does not provide a valid GL API so Xorg fails to link
against it, we cannot workaround it easily in newer Xorg version so
instead of maintaining a pile of patches for it we use 1.14.4 version
as an interim solution.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was added to fix [DEL-898] but it is no longer needed after the
underlying changes in the rootfs hierarchy (added '/run' mountpoint)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Provides fw_printenv/fw_setenv utilities to read/write the u-boot
environment from Linux.
https://jira.digi.com/browse/DEL-800
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment this image is a VFAT file system containing the kernel
and the device tree blobs.
https://jira.digi.com/browse/DEL-932
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is now used in both ccimx6adpt and ccardimx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Previously jffs2 images flashed from u-boot were not booting Linux. The
kernel was unable to mount the rootfs.
There have been some patches lately in the kernel that fix this problem,
so build jffs2 images.
Nevertheless the default image type is still ubifs when using linux 3.x.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLE variable has been deprecated in poky. The new
SERIAL_CONSOLES allows to configure multiple devices.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The do_update_dts function was hardcoded for ccardimx28js. We need to
make it mxs specific so the recipe can be used for other platforms that
do not share the same device tree configuration (for example the
upcoming ccimx6js)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the BOARD selection out of the bootlets recipe so it can be used
from machines defined in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the flash parameters to the machine configuration files so it's
easier to create derivative machines and use the image bbclass to create
flash images.
(based on a patch from Seth Bollinger <sethb@digi.com>)
https://jira.digi.com/browse/DEL-682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use a variable to select GPU flavour (X11, framebuffer).
No functionality change, just coding style.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Those boolean helper variables can be used in different recipes so move
them to a common place.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment our kernel 3.10 on ccardimx28js does not support jffs2
images, so do not build them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Alex Gonzalez