Commit b581ac2a3b ("u-boot: rework deploy
symlinks using uboot_deploy_config") removed u-boot symlinks as part of cleanup
process. However, the main symlink is still required for the ccimx6 and
ccimx6qp platforms to generate bootable SD card images.
This commit keeps the symlink for those specific platforms to fix the SD card
image creation process.
https://onedigi.atlassian.net/browse/DEL-9758
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the CC6 and CC6QP platform configurations to use the latest
NXP BSP based on U-Boot v2024.04, unifying support across all NXP-based
platforms.
https://onedigi.atlassian.net/browse/DEL-9758
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
On the multi-MTD layout (default) the 'data' UBI volume is never created
and thus not mounted by the system. This is because with this layout, the
creation of the UBI volume is done by the 'update' command, but nobody
updates this partition cause DEY doesn't generate an image for it.
We want the 'data' UBI volume to be created so that the CC6UL can connect
to the regular Remote Manager URI and store the certificate in it.
As long as a UBI volume is created, Linux will mount it, so this commit
erases the partition and creates the UBI volume.
The same goes for the 'update' partition. The installer was relying on the
recovery mechanism to wipe this partition, but this is not longer required
with UBI. As long as the installer erases the partition and creates the
volume, Linux will be able to mount it, so the boot in recovery mode has
been removed from the script.
Note: the formatting is only done for multi-MTD layout; the ubivolscript
creates all volumes for single-MTD layout.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit ac69566ecd mistakenly removed
the command of cc9, cc8x, and cc8m media installers that sets the
variable that contains the U-Boot file to install.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9720
At the point of saving the bootcmd for the second stage of the install
process we want to use the variable value, not the variable name
since this variable doesn't exist after the environment is reset.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9711
Use the existing uboot_deploy(_spl)_config function to clean up and rework
the symlinks created in the deploy directory.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This gets substituted when TrustFence is enabled to "signed/encrypted"
or removed when TrustFence is disabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Programming an encrypted bootloader can only be done after the
secure keys have been programed on the OTP bits, and the device
has been closed. Programming on an open device would result in a
non-secure configuration or a non-bootable device after the
close operation.
Create functions to detect the current TrustFence status and exit
the install script if the device is open and the artifacts are
encrypted.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9699
The `-t` option to program images with TrustFence didn't make
much sense because the install script is dynamically generated
at build-time with the name of the boot artifacts containing
"signed/encrypted" on their filenames.
This commit:
- Removes `-t` option to simplify the script.
- Determines if programming a signed/encrypted bootloader by
looking at the bootloader filename.
- For NXP platforms, reworks the function that updates the
bootloader to properly program only-signed bootloaders (currently
wrongly using `trustfence update`)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The USB and SD installers are U-Boot scripts that are practically
identical.
Merge them into a single template with a couple of machine variables that
determine the default device index in U-Boot for the USB or the microSD
card.
Do dynamic substitutions to create the two installers out of the template.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The installer uses the regular rootfs filename or falls back to search
for a squashfs (read-only) rootfs image.
The UUU installers of eMMC-based platforms use an if/elif/else structure
to determine which file exist (in order of preference). Replicate this
structure on the rest of platforms and installers.
This avoids printing an error message if the default rootfs does not exist
but the read-only one does.
Also, reset 'rootfstype' variable if the default rootfs file exists, which
allows to install regular images over a previous read-only system.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit fixes the rm command in the adapt_uboot_filenames function to
prevent build failures when the target artifact does not exist, ensuring the
operation is safe in all cases.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 29d32063ac0abb1017756f62f94aec22ce305b60 ("u-boot: kernel-fitimage:
Fix dependency loop if UBOOT_SIGN_ENABLE and UBOOT_ENV enabled") in Poky layer,
the `kernel-fitimage` and `uboot-sign` classes are no longer explicitly
dependent. This change introduced a race condition when inserting the signed
RSA keys into the U-Boot DTB for FIT image verification.
This commit introduces a new step for `do_uboot_assemble_fitimage`, which is
now responsible for injecting the keys into the U-Boot DTB. This logic was
previously handled in the Linux kernel recipe via the `do_assemble_fitimage`
function in previous Yocto versions.
Additionally, a build-time dependency is added between the `do_uboot_assemble_fitimage()`
function and the kernel's `do_kernel_generate_rsa_keys()` task, which is
responsible for generating the RSA keys used to sign the FIT image.
https://onedigi.atlassian.net/browse/DEL-9634
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This overlay contains a workaround to make the USB-OTG
work as USB device when connected to a host.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9610
(cherry picked from commit ec92f5fdd10a61e37ac3778d0d3aa1816bc6b0aa)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit updates the installer scripts to support CCMP1 platforms under
Yocto 5.0, aligning them with the current behavior used for CCMP2.
Changes include:
- Adding support for the metadata partition, which is now required
- Including the optee/opteemin flavors in boot artifact filenames
- Ensuring the script structure and logic remain consistent with CCMP2 install scripts
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The function had into account the memory variants when copying U-Boot
device trees, but not the U-Boot binaries themselves.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Both boot artifacts now use the same signed label, so this commit removes
unnecessary logic and updates the UUU install script to support the new boot
artifact naming. It also fixes the detection of signed artifacts by checking
for the presence of the FIP artifact, instead of relying on a U-BOOT artifact
that does not exist on this platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
(cherry picked from commit 96e1e8351d)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Based on the boot schemes and sources supported for each platform, the boot
artifacts now include this information in their filenames. This commit updates
the filenames accordingly in several recipes.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest U-Boot v2023.10 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These patches were originally backported from U-Boot v2023.07, and now that
u-boot-tools is using v2024.01, they are no longer needed
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Arturo Buzarra
Hector Palacios
Javier Viguera
Isaac Hermida
Francisco Gil
Gonzalo Ruiz
Gabriel Valcazar