Other platforms that have flutter support use clang to build the flutter-engine
recipe, so do the same with the ccmp15. meta-flutter uses clang for a set of
its recipes (mainly flutter-engine) as long as meta-clang is in the bblayers,
so all we need to do is add said layer.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We originally removed GUI-related layers from headless platforms in commit
ef26e935d0, but we left meta-webkit in the ccimx91's bblayers due to a
spurious selinux dependency. Since we recently removed both the webkit and
selinux layers from the ccimx95's bblayers in commit 2aaa76c963, do the same
for the ccimx91.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The new image runs the local ConnectCore demo application using chromium
on the ccimx95.
https://onedigi.atlassian.net/browse/DEL-9838
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment, webkit does not work well on the ccimx95. Running cog on
wayland crashes with:
eglCreateWaylandBufferFromImageWL not found
cog-platform-wl.c:1731:on_export_wl_egl_image: assertion failed: (wpe_view_data.buffer)
So just delete the layer from the project's config file. Selinux layer
depends on meta-webkit, so we need to remove it as well.
https://onedigi.atlassian.net/browse/DEL-9838
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
i.MX6 platforms use an older version of weston, 10.0.5.imx, which sets the
wayland socket to wayland-0 by default. Without this change, our demo launcher
scripts/services will fail on ccimx6/6qp platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We support only B0 silicon revision and that is already set on
"imx-digi-base.inc" for all mx95 based machines.
https://onedigi.atlassian.net/browse/DEL-9811
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add a variable analogous to TRUSTFENCE_SIGN to enable/disable artifact
encryption. Deprecate TRUSTFENCE_DEK_PATH in favor of TRUSTFENCE_KEYS_PATH to
use a more generic name and avoid overloading it as an on/off flag. Add per-key
variables for encryption key filenames to avoid hardcoded names and allow
platform overrides.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the virtual OP-TEE syntax for the CCMP1 and CCMP2 platforms
to align with the changes introduced in the meta-st-stm32mp layer. Specifically,
it mirrors the update made in commit ded46c7d24addf91ec81c9f64309e6376689977a
("Adapt to virtual optee changes").
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The ConnectCore MP2 DVK does not include an external STM32G0 component.
This commit removes the 'usbg0' entry from MACHINE_FEATURES to prevent
the installation of the unnecessary stm32mp-g0 firmware.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Adds support for signing and encrypting Cortex-M firmware on STM platforms,
following the STM32 MPU Ecosystem v6.1.0. This update enables secure boot of
co-processor binaries on ConnectCore MP2, enhancing firmware protection.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
vfat images need U-Boot scripts, which are always provided by the U-Boot
recipe, even for imx-boot-based machines. Replace the machine-dependent
BOOTLOADER_IMAGE_RECIPE with virtual/bootloader (which is provided by
u-boot recipes).
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove obsolete SD card image creation logic and related variables. We
will use WIC images for bootable SD cards.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notice that we need to create u-boot and imx-boot symlinks in the deploy
directory, as they are required for the bootloader of the wic images.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Different platforms use different Cortex-M processors, so instead of
using the M4_DEFAULT_IMAGE_MX95 (as meta-imx does) for an M7 processor,
generalize to the CORTEXM_DEFAULT_IMAGE variable name. Also, move it
to the imx-boot recipe (where it is used) and deploy that image to
the imx-boot-tools directory, so the imx-boot image can be regenerated
externally (without yocto).
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove IMAGE_BOOT_FILES and related WKS dependencies from ccimx93-dvk and
ccimx95-dvk machine configs. IMAGE_BOOT_FILES defines the files included
in the boot partition when creating WIC images. The removed files are
the Cortex-M demo firmware that we don't want on the boot partition of
our WIC image.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the secure boot support for STM platforms based on the
STM32 MPU Ecosystem v6.1.0. It introduces support for encrypted boot artifacts,
including TF-A and FIP, and enables this functionality for the ConnectCore MP2
platform.
This enhancement allows secure boot deployments with both authentication and
encryption for improved protection of critical boot components.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit disables the signing and encryption mechanism for the ConnectCore
MP2 platform's co-processor firmware. Currently, this functionality is not yet
supported in DEY, and enabling it causes build failures when TrustFence support
is active. Disabling it ensures successful builds until full support is
implemented.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add the ccimx95 platform cloned from mx95lp5. Provide DDR configuration,
configure the console on lpuart6, and update ccimx95-dvk.conf to select
the new board.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the LPDDR4 firmware list from the shared ccimx9 include into the
machine configurations for the ccimx91/93 DVK, allowing the upcoming
ccimx95 to utilize its own distinct values.
Also, remove the redundant IMXBOOT_TARGETS and BOOTLOADER_SEEK_USERDATA
overrides in ccimx91-dvk, as they are duplicated.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the CC6 and CC6QP platform configurations to use the latest
NXP BSP based on U-Boot v2024.04, unifying support across all NXP-based
platforms.
https://onedigi.atlassian.net/browse/DEL-9758
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the CC6 and CC6QP platform configurations to use the latest
NXP BSP based on Linux kernel v6.6, unifying support across all NXP-based
platforms.
https://onedigi.atlassian.net/browse/DEL-9758
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
With the updated firmware-ele-imx recipe, the installation logic now
requires SECOEXT_FIRMWARE_NAME to be empty when no extra firmware is
to be installed.
https://onedigi.atlassian.net/browse/DEL-9748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.1.0 software package from the meta-st-x-linux-ai
layer.
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the Digi custom .bbappend recipes for FIP and TF-A to align
with the latest ST BSP release, based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.06.11
tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit enables building dey-image-flutter for the ConnectCore MP15
platform. It integrates the necessary configurations to support Flutter-based
graphical applications on this platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
As the OmniVision OV5640 camera is now deprecated and no longer supported by
most vendors, this commit moves its support to a separate Device Tree overlay,
allowing it to be used if needed.
Instead, the Sony IMX335 MIPI camera is integrated into the default device
tree as the default supported camera for the CCMP25-DVK platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Move the address where the fitImage is loaded after the addresses
where the binaries in it are decompressed. This way, the fitImage
can grow without size restrictions.
The memory map now looks like this:
0xC0000000 Start of memory
|
| (32 MiB)
v
0xC2000000 Kernel loadaddr ($loadaddr)
|
| (32 MiB)
v
0xC4000000 DTB/DTBO load address ($fdt_addr)
| (4 MiB)
v
0xC4400000 Init ram disk ($initrd_addr)
|
|
| (64 MiB)
|
v
0xC8400000 ZIP/fitImage address ($fit_addr_r)
|
~
|
v
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* Delete custom wolfssl_5.4.0-fips.bb recipe and README.
* Removed WolfSSL dynamic layer registration.
FIPS support is now managed through the external meta-wolfssl layer,
making this implementation unnecessary in meta-digi.
https://onedigi.atlassian.net/browse/DEL-9631
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
IMAGE_FSTYPES was declared on each platform config file, but it has the
same values for all platforms depending on the storage media (mmc or mtd)
and whether read-only is enabled.
Move the conditional weak assignment to digi-default.inc and remove it from
each platform config.
In the case of STM platforms, since IMAGE_FSTYPES is weak-assigned by STM
layer, we still need to append/remove from it inside the platform config,
but move it to the family includes, rather than declaring it on each
specific platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The generation of the sdcard image takes time and resources, and
it's not involved in the Get Started.
This can be easily re-enabled by appending the variable in the
project local.conf.
Append the variable in the build scripts, to facilitate its usage
on release builds.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Javier Viguera
Gabriel Valcazar
Hector Palacios
Arturo Buzarra
Mike Engel