Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
We have seen errors when verifying the rootfs update on 2 GiB variants. Forcing
otf-update prevents these errors from happening.
https://jira.digi.com/browse/DUB-855
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, make the script recognize the different SOM variants.
https://jira.digi.com/browse/DEL-6175
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since we were modifying UBOOT_SYMLINK for the ccimx8x, we were generating
u-boot symlinks with imx-boot names. This also caused the imx-boot recipe to
fail during compilation, because it couldn't find the old UBOOT_SYMLINK that
we replaced.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows for other platforms to use different bootloaders (like imx-boot),
while leaving the default behaviour intact.
https://jira.digi.com/browse/DEL-6159
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The module was being loaded by the default udev rules. With this new rule, the
module will be loaded with our custom qualcomm.sh script.
https://jira.digi.com/browse/DEL-6067
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The module's sources are now obtained from the kernel and two of our patches
aren't needed anymore.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This way, other recipes (like the ones for kernel modules) can re-use the
sources if needed.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some overrides that were missing (imxgpu, imxdpublit) are needed for certain
packages to build.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit a2a8491140)
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since this binary (u-boot-atf.bin) wasn't being deleted, the mkimage makefile
was using the one from the previous iteration, causing the 1GB imx-boot to
contain the 2GB U-Boot.
https://jira.digi.com/browse/DEL-6094
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This firmware was built using commit 9a6f1cbba2f49d2284c4211688d3cdd12fc67eca
in our cc8x-scfw repo.
https://jira.digi.com/browse/CC8X-149
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package includes applications to:
- Update the MCA firmware
- Manage different MCA settings
- Configure the tamper settings
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is our new Linux branch based on the beta 2 BSP for i.MX8 QXP
https://jira.digi.com/browse/DEL-6084
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, move all of the recipe's patches from the .bbappend file to the .bb file,
because the .bb file's modifications depend greatly on said patches.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In order for Yocto to append all the necessary firmware binaries to the U-Boot
image, this recipe needs to be up to date.
Also, remove the older hardcoded SRCREV in our .bbappend file. The file that
gets patched hasn't been modified since beta1, so our patch apllies cleanly to
beta2.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This adds and AHAB container to the QXP binaries, although according to the
makefiles in the mkimage package, it isn't used in the A0 revision of the CPU.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is needed to match U-Boot's SC API changes. Also, for now, use NXP's
A0 version of the firmware without our customizations until we have access to
the new SCFW SDK.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ATF binary's source code needs to be updated for the new U-Boot to work
properly.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates firmware binaries to tag r10004.2 from
https://stash.digi.com/scm/linux/qca6574au-le-2-2-1_qca_oem.git
and modifies the recipe to use the QCA6574 proprietary driver by default.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The boot.(ext) image class was looping over ${KERNEL_DEVICETREE}
variable which is normally the list of device tree filenames.
The loop however does not take into account the possibility that
this list of files are within a sub-folder, as it happens with
ARM64 device tree files in the kernel tree.
Use 'basename' to remove any potential subfolder on the iterations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6060
The 5.4.37 recipe already exists on meta-freescale and the
bbappend was wrongly resetting the COMPATIBLE_MACHINE to only
the ccimx8x.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update to newest U-Boot v2017.03
Remove the package version since it is based on a git repo and only
used natively.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe takes a binary demo for the Cortex M4 CPU.
This is later used by imx-boot recipe to bundle it with the
bootable image for the i.MX8 (together with the SC firmware,
U-Boot, etc).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are required for the imx-m4-demos. The classes exist in
meta-fsl-bsp-release but will eventually be moved to meta-freescale
so, presumably, they could be removed in the future.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>