When ST_OPTEE_DEBUG_TRACE=0, the source code default to a LOG_LEVEL=2
which prints a lot of messages on the boot log.
Reduce it to LOG_LEVEL=1.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This override was recently added to meta-freescale's graphical package recipes
to easily distinguish between i.MX platforms that use the Vivante driver and
those that use the Mali one. Without this change, a lot of these recipes are
broken, so sync with the latest changes in meta-freescale's imx-base.inc file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We tested all tarball compression formats supported by poky, and although bz2
has faster (de)compression time, xz is better in terms of compression ratio:
for all of the rootfs tarballs generated for our currently supported
images/platforms (15 at the moment), the xz format saves an average of 30 MiB
per tarball compared to bz2, totalling up to 450 MiB.
No extra dependencies are pulled in, since xz-native is already being pulled in
for all of our image builds, so the only drawback to this change is the
increased compression time (+7.34s on average per tarball).
https://onedigi.atlassian.net/browse/DEL-9459
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit clears the Cortex-M33 applications list to prevent including all
the Cortex-M33 demo applications from the ST layer. In the future, if we have
custom Digi examples, they should be added here.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
.ext4 files are identical to .ext4.gz, but uncompressed. .tar.xz files are the
exact same as .tar.bz2, but compressed with a different format.
Remove these artifacts to reduce storage overhead and to match the rest of our
platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This replicates meta-imx commit addc08b02f9a, which was added to be able to
re-use packages in i.MX8/i.MX9 builds. Without this change, there are
compilation errors when building recent versions of the onnxruntime package
because some .S files are built with specific -march switches that conflict
with our current tunings. For example, when building for the ccimx8x-sbc-pro:
cc1: error: switch '-mcpu=cortex-a35+crc+crypto' conflicts with '-march=armv8.2-a+fp16' switch [-Werror]
[...]HalfGemmKernelNeon.S:151: Error: selected processor does not support `fmla v20.8h,v16.8h,v0.h[0]'
Using the generic tuning solves this issue, and according to the log in the
original meta-imx commit, this has minimal to no impact on binaries, so use
said tuning in all relevant platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The value of this variable is always the same within a platform, so it doesn't
make sense to have different variables for it in each recipe that requires it.
While at it, it seems like all currently supported platforms in DEY 5.0 use the
same value of "wayland-1", presumably because they all use similar versions of
wayland/weston. Set this as the default value for all platforms for now. As we
support more platforms, we can adjust this value if needed, but if it ends up
being the same for all platforms, we can just hardcode it.
https://onedigi.atlassian.net/browse/DEL-9404
Co-authored-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes kernel headers from the SDK package list to prevent
overwriting the default ones, as there are currently no ST-specific headers
required.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the default FIP generation variables to align with the
common stm32mp2 configuration files from the latest meta-st-stm32mp layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0
(Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest U-Boot v2023.10 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest Linux kernel v6.6.48 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the gcnano recipes integrated into meta-digi, as a new
version (v6.4.19) has been released in the latest ST BSP, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated OPTEE-OS recipes and synchronizes the Digi custom
.bbappend with the latest v4.0.0 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated TF-A recipes and synchronizes the Digi custom
.bbappend with the latest v2.10 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
poky has reworked the format of image names, hardcoding the IMAGE_NAME_SUFFIX
(.rootfs) into IMAGE_LINK_NAME, the name used for image symlinks. This would
only be considered a cosmetic change if it weren't for the fact that we have
scripts and test infrastructure that relies on the old image name format, and
this change would force us to rework it all.
Remove the suffix from the link name to maintain our image name format, and
reflect this name in our custom image type scripts. Note that this removes
".rootfs" from several files, for example:
* .rootfs.ext4.gz is now .ext4.gz
* .rootfs.cpio.gz.u-boot.tf is now .cpio.gz.u-boot.tf
* .rootfs.ubifs is now .ubifs
* .rootfs.sdcard is now .sdcard
However, symlink names and non-rootfs files (.boot.vfat, .recovery.vfat...)
are unchanged.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variable now has a weak assignment in poky with the default value
"sysvinit", which was overriding our weak assignments.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove ccimx9-specific versions from the ccimx9 machine file and use the same
package versions for all platforms, except where noted explicitly in
imx-base.inc. Also, reflect the latest ported changes from meta-imx.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ccimx91 is a headless platform. Disabling those distro features
prevents building/installing packages that are useless (e.g. gstreamer)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are files for programming images with STM32CubeProgrammer tool. We don't
use the tool or the files. Disable the task to avoid build warnings, just like
we do for the ccmp1 platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of manually disabling the task, use the ENABLE_FLASHLAYOUT_CONFIG
variable which is meant for that exact purpose.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds the initramfs into the FIT recovery
image. If the RAM disk image is included in the FIT
image we need to create a initramfs file that doesn't
include the u-boot header, because the FIT descriptor
contains all the necessary information to use the
initramfs file.
https://onedigi.atlassian.net/browse/DEL-9168
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Optee-client provides the TEE Client API as defined by the GlobalPlatform TEE standard.
It is required to communicate with a Trusted Application (TA) running in a Trusted OS.
https://onedigi.atlassian.net/browse/DEL-8970
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We rely on FIT support to implement boot artifact authentication on ccmp1
platforms, but our implementation made it impossible to enable FIT support
outside of the context of Trustfence/secure boot.
Change this so that it's possible to enable FIT support without having to sign
the FIT artifacts. Also, modify the linux-dey 5.15 recipe so that the U-Boot
DTBs with signatures get copied only when FIT signing is enabled.
https://onedigi.atlassian.net/browse/DEL-8946
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit implements the support to allow different memory configurations for
the CCMP1 platforms, adding support to 512MB and 1GB memory variants for the CCMP15.
https://onedigi.atlassian.net/browse/DEL-8752
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The ccimx93 bootloader signing requires this version of the sign script,
but at the moment, the updated script is not compatible with the other
AHAB-based module (ccimx8x), so we cannot just update the recipe for
all modules.
Thus, create a new version of the recipe and use that for the ccimx93
while we still use the old version for the rest of the platforms.
https://onedigi.atlassian.net/browse/DUB-1068
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul is the only platform that doesn't include a desktop backend in the
LVGL image, so remove the desktop backend suffix from the image's name. This
affects the image name itself, the corresponding SWU package and the
installation scripts.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The support to update U-Boot in the redundant partition must be enabled in the project
configuration file by setting the variable "SWUPDATE_UBOOTIMG_REDUNDANT" to "true":
SWUPDATE_UBOOTIMG_REDUNDANT = "true"
This feature is only available for the newer platforms: ccmp13, ccmp15 and ccimx93. Trying to
enable it in older platforms will display a warning and fallback to non-redundant update.
Signed-off-by: David Escalona <david.escalona@digi.com>
Backport of multimedia package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of multimedia
recipes from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
https://onedigi.atlassian.net/browse/DEL-8840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This new variable establishes the number of 1Kb blocks to skip before writing U-Boot in the
bootloader partition.
Signed-off-by: David Escalona <david.escalona@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: bd5506ddba364ad04602d5009b77077f78450b97
Source: NXP's MCUXpresso SDK_2.14.2_MIMX9352xxxxM
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The TF-A and OP-TEE images have different suffixes depending
on whether TrustFence is enabled or not, but the suffix variables
themselves must exist independently of whether TF is enabled.
Currently, they were defined on the trustfence.bbclass, and the
variables did not exist when TF was disabled, which caused build
problems, for example, building the SWU file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This compression method has a better compression ratio than the default (lzo),
but the (de)compression speed is slower, leading to slower read/write speeds.
However, the recovery partition only gets accessed in specific use cases such
as software updates and partition encryption, and it contains an initramfs. The
UBIFS will only be read at boot time to load its elements, but once the
initramfs is loaded in RAM, there are no more read/write operations to the
UBIFS during runtime, so the speed penalty is minimal.
Take advantage of the improved compression ratio to reduce the size of the
recovery image. On the ccimx6ul, the size is reduced by 248 KiB.
https://onedigi.atlassian.net/browse/DEL-8819https://onedigi.atlassian.net/browse/DEL-8825
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This includes also an update and rename of the Edgelock Enclave firmware
package (firmware-ele-imx).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the BOOTLOADER_SEEK_OFFSER, because it has been
moved into the swupdate class and renamed into SWUPDATE_UBOOT_OFFSET.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds u-boot swupdate support for all platforms.
Now u-boot can be updated with all our supported update
options. Currently it will only update first partition
u-boot partition.
https://onedigi.atlassian.net/browse/DEL-8749
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The 'mtd-blacklist' parameter prevents swupdate from acting upon those
partitions that we consider sensitive.
Make such list platform-dependent.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: a0352b0cf7267c896b55980dedd08daddc780733
Source: NXP's MCUXpresso SDK_2.14.0_MIMX9352xxxxK
And, drop deepview-rt support for ccimx93, as NXP has done the same in
6.1.36-2.1.0 release.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An anonymous function in linux-stm32mp.inc produces a bbfatal error when
KERNEL_DEVICETREE variable contains more than one device tree. This is our
case since we build the main DT plus a number of DT overlays.
This commit removes the dependency to this include file since we have our
own recipe to build the kernel and it is not needed at all.
It also removes the build of a uImage and the need to provide a
LOADADDR.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Notice, that the new version of weston used now by the ccimx93 requires
a different profile file (weston-socket.sh). This profile supercedes the
old 'weston.sh'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Backport of multimedia package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of multimedia recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
LVGL is a free and open-source embedded graphics library that is able to run
in environments with limited resources.
This image includes a desktop environment and an LVGL widget demo (lvgl_demo)
https://onedigi.atlassian.net/browse/DEL-8740
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds signed FIT image support for the CCMP1
platforms when using Trustfence.
https://onedigi.atlassian.net/browse/DEL-8591
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Through the inclusion of 'nand-4-256' in BOOTDEVICE_LABELS, the include
file 'st-machine-common-stm32mp.inc' adds strings to MULTIUBI_BUILD and
IMAGE_FSTYPES that result in building ubi and ubifs images.
These are redundant and not needed since meta-digi's
'image_types_digi.bbclass' already generates the needed ubifs images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8714
These are files for programming images with STM32CubeMX tool.
We don't use the tool or the files. Remove the task to avoid build
warnings.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
BOOTDEVICE_LABELS defines the supported boot device (NAND by default).
BOOTSCHEME_LABELS defines the which kind of boot is supported.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
ConnectCore Cloud Services examples are included in 'dey-examples' repository
so they can be built from here and also imported in Eclipse/Digi Application
Development Environment for Linux with the samples wizard.
The example 'upload_file' has been removed since currently there is no support
for binary data points in the CCCS daemon/client model.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This recipe generates several packages:
* 'cccs' includes the CCCS shared library
* 'cccs-daemon' includes the binary and resources to execute the CCCS daemon
(daemon, service and init scripts, configuration file)
* 'cccs-cert' includes the required certificate to use CCCS daemon
* 'cccs-gs-demo' includes the binary and resources to execute the CCCS get
started demo (binary, service and init scripts)
* 'cccs-legacy' includes the binary (all-in-one) application to execute
the legacy CCCS application (aka cloud-connector) and the configuration
file
* 'cccs-legacy-dev' includes resources to develop legacy CCCS applications
(all-in-one) (header files inside 'cloud-connector' and 'cloudconnector.pc'
pkg config file)
* 'cccs-legacy-staticdev' includes static resources to develop legacy CCCS
applications (all-in-one) (static library)
This commit also renames:
* 'CLOUDCONNECTOR_PKGS' variable to 'CCCS_PKGS'.
* 'CC_DEVICE_TYPE' variable to 'CCCS_DEVICE_TYPE'.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
All the 'altboot' script functionality has been moved directly to the 'altbootcmd' command
in U-Boot, so this script is no longer necessary. Remove it for all platforms.
https://onedigi.atlassian.net/browse/DEL-8674
Signed-off-by: David Escalona <david.escalona@digi.com>
This wks file creates the required GPT and partition layout
to have a bootable SD card with the following partitions:
- fsbl1
- fsbl2
- metadata1
- metadata2
- fip-a
- fip-b
- u-boot-env
- linux
- rootfs
- data
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8120
Equivalent commits in meta-freescale:
71d2a1ad49a3e04d0d401d4e9c52d5a50105b6dc
995f2f0a86da9428af348e72e51beb5063ebd729
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now that both U-Boot and the SCFW can autodetect the RAM configuration, we can
simplify the imx-boot build process to generate two binaries (one per SOC
revision) instead of eight. Build "flash_spl" imx-boot images and use only one
global defconfig for u-boot.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This update includes automatic RAM configuration detection, and only one SCFW
binary is needed for all ccimx8x variants. Adapt the imx-boot recipe
accordingly.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Backport from NXP's lf-6.1.1-1.0.0 release for the ccimx93 (meta-ml
layer).
This version of flatbuffers is needed for ethos-u-vela version 3.6.0
(backported in following commit).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When the swu package is generated it needs the right
extension of the rootfs to be formed.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
These variables are used to generate .sdcard images, and without them, said
generation will fail.
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the sw-description used for non-dualboot systems will be missing
these values and the software update process will fail.
https://onedigi.atlassian.net/browse/DEL-8513
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).
This is the case, for example, of:
- ccmp1 (family)
- ccmp15 (SOM)
- ccmp13 (SOM)
- ccimx8m (family)
- ccimx8mm (SOM)
- ccimx8mn (SOM)
Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The name of the variable was not very intuitive of what
it contains. This variable expands to the SoC vendor
(NXP or STM).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
By default, our 'cloudconnector' package is installed.
This can be overriden by defining 'CLOUDCONNECTOR_PKG' in the 'local.conf'
with the custom package that includes this application.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
OPTEE_PKGS variable must have a default (empty) value to prevent bitbake
parsing errors.
This fixes a build failure for MP1 platforms where the variable was
undefined in the commit that added the support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NXP platforms that have 'optee' in the MACHINE_FEATURES, will install
optee userspace packages (ccimx8m and ccimx93 at the moment).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An official fix was added to meta-timesys in commit
ae4f6e9854361d4a6d71b6f8b87130268d990b32, so our workaround is no longer needed
This reverts commit 7a77130550.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 32dd3d59c250f916115b339c29aa4dbfe50a3235 in poky breaks i.MX platform
builds when "vigiles" is inherited. While we wait for a fix in the community,
work around this issue by setting a dummy default value in the MULTIUBI_BUILD
variable.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of changing POKY_DEFAULT_DISTRO_FEATURES, do the distro features
configuration directly in the DISTRO_FEATURES variable. Also, add a couple
of variables (MACHINE_DISTRO_FEATURES_ADD/REMOVE) that allow machines
for extra tweaking the distro features.
While on it, clean up some distro features:
- pulseaudio: already added by DISTRO_FEATURES_BACKFILL
- bluez5, splashscreen, initrd, gplv3: not used (dead code)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are other device managers (e.g. mdev) that do not understand those
udev rules, so do not install them unconditionally.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move generic IMX machine firmware to imx-digi-base.inc file. This eases
maintenance, as this file follows imx-base.inc in meta-freescale.
Still, configure platform's Digi specific firmware in each machine's
config file.
As a positive side effect, this removes the "firmware-imx-easrc-imx8mn"
firmware file from the 8M Mini, as it's only used in the 8M Nano. This
saves about 263KB.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ConnectCore 93 DVK only connects the XBee reset line (XBEE_RESET_N_GPIO) but not
the sleep request (XBEE_SLEEP_RQ_GPIO)
It also reworks the 'xbee-init' script to support empty reset
(XBEE_RESET_N_GPIO) or sleep request (XBEE_SLEEP_RQ_GPIO) values.
https://onedigi.atlassian.net/browse/DEL-8375
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Hector Palacios
Gabriel Valcazar
Arturo Buzarra
Gonzalo Ruiz
Javier Viguera
Mike Engel
David Escalona
Isaac Hermida
Tatiana Leon
Francisco Gil