Although in theory, you can use any label to name the different u-boot
build configurations, we have them coupled to machine names in the
boot-artifacts bbclass, and also in the default boot artifact filename
in the firmware installation scripts.
So fix that up for the ccimx93 in the machine config, and create the
proper symlinks in the do_deploy imx-boot recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This variable was removed from meta-st-stm32mp so we need to get rid of it
in meta-digi, too.
Reported-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8268
Both recipes (imx-boot and imx-mkimage) use the same source code
repository, so update both of them to the new NXP release, by copying
with minimal changes the recipes in meta-imx.
Also convert the original 'imx-mkimage' recipe, which was only for
native class, to a full target, native, nativesdk recipe. We need this
to be able to include the nativesdk one in our toolchain.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For this platform the bootable artifact is imx-boot based, so configure
some variables accordingly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rework the "build_uboot_scripts" to prevent changing the templates in
the WORKDIR, as those are part of the SRC_URI. Instead, change the
deployed scripts by using "sed" and redirection.
Also, removed UBOOT_HAS_FASTBOOT altogether, as there is no platform
that does not support fastboot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of overriding the whole do_compile function, just to reconfigure
u-boot for Trustfence, create a do_configure pre-function that takes care
of that. This allows the removal of duplicated code.
Also, disable the generation of u-boot environment artifacts. We are
not using them and so many u-boot artifacts in the deploy directory
are confusing.
Finally, adjust the names of the TF u-boot artifacts in the do_deploy
append function.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also enable recipe for ccimx93, and pass the correct DTC flags to create
overlays capable DTBs.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also:
* Support ccimx93
* Add all the patches regardless of the platform (remove overrides). The
patches do not clash, so adding all of them eases the maintanance and
the migration to new versions of the imx-atf.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use += operator to prevent resetting the value of the EXTRA_IMAGEDEPENDS
variable. That is how it's mostly used elsewhere.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is later overridden in the machine config files, but a default
(not empty) value is needed, to prevent a syntactic error in
init-ifupdown recipe (where it is used).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The poky recipes were updated on the minor version to 1.20.4
but the bbappends were 1.20.3 specific so they did not apply.
Use a wildcard to have them apply even if the minor version
changes upstream.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 0c73b31cf5)
The poky recipes were updated on the minor version to 1.20.4
but the bbappends were 1.20.3 specific so they did not apply.
Use a wildcard to have them apply even if the minor version
changes upstream.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This allows the user 'weston', which is running the video
backend, to access files on external media, such as USB
disks and microSD card.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8208
In the past, this file was cloned from poky to skip mounting
an already mounted device. This condition was done on poky's
version so the cloned file is no longer needed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
A new set of meta-freescale updates broke our layer, because they
updated opencv package and our bbappend does not apply anymore.
The build fails at parsing:
ERROR: No recipes in default available for:
meta-digi/meta-digi-dey/dynamic-layers/freescale-layer/recipes-support/opencv/opencv_4.5.2.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows users of the layer to override the value with a different
default. Same change was done in meta-freescale's imx-base file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Artifact encryption is now supported for ccimx8mn and ccimx8mm.
This reverts commit 1134e4c07c.
https://onedigi.atlassian.net/browse/DEL-7915
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 588005bb4b2200e79b180f77671304d9c5bdf509)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When read-only feature is enabled, the rootfs should be .squashfs
and not .ubifs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit c32278af74cea8cb38aa81590eaa867be1c739c9)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add configuration 'BUILD_UBOOT_SCRIPTS' to select whether to build the
boot and install scripts or not, and set it to 'true' by default.
This allows removing the scripts on upper Yocto layers.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit removes duplicated and unused build artifacts for the ccmp1
platforms. Also fixes a build warning related with flashlayout config file.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the issue in Jira
https://onedigi.atlassian.net/browse/DEL-7827 (and in GitHub
91bfa01a52#),
that is being manifest again in a CC6UL with 1GB although it may affect other
hardware.
Partitions are mounted:
* For multi-MTD systems, when an MTD subsystem event is received.
* For single-MTD systems, when a UBI subsystem event is received.
This commit avoids process UBI subsystem events in multi-MTD systems.
The automount rules filter UBI subsystem events to only process 'ubi0*' (the
only UBI device/volumes in a single-MTD) and then the executed script
'mount_digiparts.sh' checks for the existance of '/dev/ubi1' node to consider
the system multi-MTD instead of using 'singlemtdsys' U-Boot variable that only
exists on CC6UL.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
* Use 'MOUNT' variable instead of 'mount' command
* On the MTD subsystem event, stop looping once the UBI device number is found
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Increase the timeout from 90 to 120s since it's a large image
and it may take more time on different NANDs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The U-Boot environment resides on a UBI volume. The uuu script
relies on the environment to save part of the commands that
U-Boot needs to execute after reboot in the middle of the
installation. If the UBI volume 'uboot_config' does not exist
the installer fails.
This commit:
- Creates a function -on the uuu script only- for obtaining
the result of running any U-Boot command (0=success, 1=error).
- Checks the existance of 'uboot_config' volume.
- Runs 'ubivolscript' script to create the UBI volumes layout
that generates the environment volume if it doesn't exist.
- Increases the timeout for running the 'ubivolscript' since
there are occasions in which 'ubi part' (which is part of the
script) takes more time (if it cannot find the fastmap).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit b8d46f01 ("read_only: create folders in build time") creates
unconditionally default folders in spite of we are in a read-only filesystem or
not, however there are different models (dual boot, single boot..) where these
partitions exist or not, so this commit only creates these default partitions
for a read-only filesystem.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit allows to mount only the linux partition active in read-only mode.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
According to udev documentation running programs that access to mount/umount
filesystems is not allowed due to the default sandbox that is enforced on
systemd-udevd.service, so on systemd systems we must to use systemd-mount
binary instead of mount. Also systemd-mount does not support mount ubi devices
by volume name, so we need to use the absolute device path.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the extra machine specific configuration files for udev on
ccmp1 platforms to allow, for example, automount storage devices.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
By default ccmp1 platforms have dualboot mode by default, however the required
boot script was added to ccmp15 platform only, so this commit fixes it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The first time the 'dualboot' variable is tested it is directly run in
the script and doesn't need to escape the special characters.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When Dual Boot is not enabled, 'rootfsvol' variable must point to the
single boot system rootfs partition 'rootfs'.
Explicitly set this value. Otherwise the script relays on the default
rootfsvol value, which may be a Dual Boot partition.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
meta-freescale updated the base recipe and that broke the build:
ERROR: No recipes in default available for:
meta-digi-arm/dynamic-layers/freescale-layer/recipes-bsp/firmware-imx/firmware-imx_8.16.bbappend
The differences in our bbappend are simple enough that we can make a
version agnostic bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
For platforms with a FIP artifact, ignore U-Boot artifacts and instead
add to the installer zip file the FIP artifact and the ATF artifacts.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On the CCMP1 SOMs, we only consider a single system partition called UBI,
with many UBI volumes.
The variable 'singlemtdsys' allowed to change between this and
a system with multiple MTD partitions with one UBI volume each
(old approach on CC6UL).
This commit removes the variable and uses the logic as if it was set.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Use the latest 2AE NVRAM file from the master branch. This file improves
the EVM performance for the 2AE murata module.
MD5SUM:
- cyfmac4373-sdio.2AE.txt: 6301804650847946c79797387eda9c7a
https://onedigi.atlassian.net/browse/DEL-7936
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add extra configuration 'CFG_STM32_BSEC_WRITE=y' to the make line to
enable OTP write support.
https://onedigi.atlassian.net/browse/DEL-8074
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
These are available in 'meta-freescale'.
The only difference is that meta-freescale's recipes deletes de SDMA
firmware so the generic one provided by linux-firmware package is used.
We create a minimal bbappend to use the NXP provided SDMA firmware.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds Bluetooth Vulnerability CVE-2019-9506
resolution to the firmware file.
CVE-2019-9506 is a Bluetooth key negotiation vulnerability.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7134
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reset the FW files to release r00006.3.470144.2a
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-bsp/firmware-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-kernel/kernel-module-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For development this would not be needed as it points to AUTOREV, but
for releases we need to specify the SHA1 revision, and this recipe
builds two different branches (for NXP and STM platforms), so we need a
place to define two different revisions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recipes have been updated in meta-freescale, and version 1.18.5.imx
is no longer available.
Follow same change in meta-freescale's "conf/machine/include/imx-base.inc".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The crank storyboard engine is provided in binary format. The RPM
package manager that creates the rootfs needs and explicit runtime
provider for 'libEGL.so', which in the ccmp15 is provided by the
'libegl-gcnano' runtime package.
Fix build failure:
--> Finished dependency resolution
Error:
Problem: package packagegroup-dey-crank-1.0-r0.0.ccmp15_dvk requires crank-sbengine, but none of the providers can be installed
- conflicting requests
- nothing provides libEGL.so needed by crank-sbengine-7.1-r0.3.ccmp15_dvk
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The modalias changed as part of the kernel update to version 5.15.
See commit dd545833b773b20aa7cec10f89bff96014ccb64f in kernel tree.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fixes a failure in the firmware installation script when trying to
program crank images:
./install_linux_fw_uuu.sh -i dey-image-crank
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.boot.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.recovery.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.ubifs'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the CC6UL 1GB flash variant, the programming of the rootfs exceeds
the current 90 secs timeout, giving following failure:
[Bulk(R):LIBUSB_ERROR_TIMEOUT] fb[-t 90000]: ucmd update rootfs ram ${fastboot_buffer} ${fastboot_bytes} -e
Error: Bulk(R):LIBUSB_ERROR_TIMEOUT
Increase the timeout to prevent the failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We don't want the FIPS version of wolfssl to be used by default, so
the recipe is configured as:
DEFAULT_PREFERENCE = "-1"
Unfortunately, DEFAULT_PREFERENCE has lower precedence than the layer
priority, so we need to put the recipe in a layer with priority less
or equal to the other layers having wolfssl recipes (meta-openembedded,
meta-wolfssl). This means in our case using 'meta-digi-arm' instead of
'meta-digi-dey', in which conceptually would fit better.
https://onedigi.atlassian.net/browse/DEL-8036
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Base recipe in Poky has been updated to that version, so we need to
update the bbappend to prevent a bitbake parsing failure.
NOTE: to review the patches once they are updated in
'meta-st-openstlinux'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale updated to version '10.0.0.imx', so our bbappend fails
with:
ERROR: No recipes in default available for:
... meta-digi-dey/dynamic-layers/freescale-layer/recipes-graphics/wayland/weston_9.0.0.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As that's an old VM with limited specs, there is no much gain on using
it over the canonical Stash repositories that justifies the code
overhead and the possible errors due to synchronization problems.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The SRCREV may change depending on the version of the kernel, so it
cannot be a common variable for all kernel versions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the canonical Stash repository to avoid synchronization problems
between the repo and the mirror.
Moreover the LOG mirror is hosted in an old VM machine with limited
specs, and although the transfer of the objects is faster, the counting
of the objects to transfer (which is done in the server) takes ages to
complete, so at the end, there is no time gain using the mirror.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not needed anymore in our layer, as this has been fixed in meta-st-stm32mp.
This reverts commit 786e5c9e56.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Commit 8cba3aaefb in 'meta-freescale' changed the kernel_localversion
function we are using in our kernel recipe. This leads to a not-properly
configured kernel build, where CONFIG_MODULES is disabled. That
config option is needed to build external kernel modules in other
recipes, so those recipes (kernel-module-qualcomm, cryptodev-module,
etc) fail to build.
The commit makes sure the kernel is properly configured for building by
extending the do_configure function in a "prepend".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default STM layer creates extra partitions, the vendorfs partition is
reserved to save custom STM libraries and binaries, however the ccmp15 platform
does not have this additional partition, and stores all the libraries in the
rootfs.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
gstreamer recipes was updated to v1.20.3 in poky layer, so this commit updates
the recipe version for custom bbappends.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
weston recipe was updated to v10.0.1 in poky layer, so this commit updates the
recipe version and refresh a custom STM patch.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the required firmware binaries for bluetooth and wireless
interfaces, based on the release imx-hardknott-drogon_r1.0 (Wireless firmware
v13.10.246.265)
https://onedigi.atlassian.net/browse/DEL-8021
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Building a toolchain/SDK fails for ccmp15-dvk, because the NXP-based
trustfence tools (for example the cst) are not available. Fix the build
by filtering out those tools when the build platform is not NXP based.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It's just a waste of space as we already have the kernel image in the
'linux' partition and that gets mounted under /mnt/linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recipe fails to build for the target, but that is expected, as this
is a tool you need to run in the host or from the toolchain/SDK, so
rework the recipes to restrict only for native and nativesdk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 4.0 only supports OpenSSL 3.0.x while NXP's CST (code signing
tool) is still using OpenSSL 1.1.x. So the build fails when using the
Yocto-build OpenSSL. Instead, build OpenSSL 1.1.1 as part of the build of
the CST and link statically against libcrypto, so the resulting binaries
(cst, srktool) do not depend on any specific OpenSSL version installed
on the development computer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In order to perform the standalone signature process, it was required
to rebuild the Toolchain with Trustfence support enabled.
CST source code is now available for downloading in the Digi FTP, so add
Trustfence sign scripts and cst/srktool to the default toolchain for it
to be used for standalone signature without rebuilding.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 2c9b721fb9ce38dcd0034e22d95db6e0ee068955)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The enable p2p patch add support for enabling p2p as module parameter setting
it by default to false.
The cfg80211 netdevice fixes the registration of virtual interfaces for kernels
v5.12+.
https://onedigi.atlassian.net/browse/DEL-7986
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Also, fix the sequence number of the GPIO_SET_DEBOUNCE_IOCTL ioctl. Same
fix has been done in Linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 16eded4f0edcc603de83be7155f7c09718ba5ddd)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove deprecated versions of recipes updated in other general layers
(poky, meta-openembedded). Also remove duplicated IMX specific recipes that
are available in other BSP layers (meta-freescale, meta-fsl-demos, etc).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An outdated 'mesa' bbappend on meta-st-stm32mp is making mesa package
fail to build, due to incorrect configure options.
mesa-22.0.0/meson.build:614:2: ERROR: Problem encountered: kmsro requires dri3 for X11 support
Override the build configuration in our layer until the bbappend gets
fixed in ST layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto is becoming more strict on not using tags in the SRCREV, as that
may lead to problems in the different tasks of a bitbake recipe.
As of Yocto 4.0, bitbake errors when such condition happens, with:
"Recipe uses a floating tag/branch without a fixed SRCREV"
So convert the SRCREV of all tags to the proper SHA1 revision.
Also, extend the 'fix-build-issues' to delete '-Werror' from the
compilation flags. Newer versions of GCC (as the one used in Yocto 4.0)
throw more (new) warnings, and the '-Werror' flag was making the build
to fail.
cc1: all warnings being treated as errors
lim_api.c:1057:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
lim_admit_control.c:169:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* fix arch tune files path in machine config
* update imx-digi-base config file (using as a base the imx-base.inc
config file in 'meta-freescale')
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, the STM layer includes several tools in the SDK, one of which is
the gcc-arm-none-eabi toolchain. However, in the build process it throws the
following unexpected error about an unsatisfied runtime dependency:
Error:
Problem: conflicting requests
- nothing provides libpython2.7.so.1.0()(64bit) needed by
nativesdk-gcc-arm-none-eabi-9-r0.1.x86_64_nativesdk
Since this package works with python3, python2 was deprecated and this tool is
only needed to build Cortex-M4 applications, this commit removes this package
from the default SDK.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a patch for the qcacld-3.0 wireless driver to read the
wireless MAC addresses from device tree. This patch is based on the original
commit from qcacld-2.0 driver improving and simplifying the code to work with
the new qcacld-3.0 driver.
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the wireless firmware in order to work with the new Linux
qcacld-3.0 wireless driver.
Latest release "r10016.1 - Post-CS3 1.0.016.1" updates the following files from
"qca6574au-le-2-2-1_qca_oem" product branch:
PCIe:
- athwlan.bin (b4fd36922625b7303d006581f6c7cd10)
- utf.bin (0d70048214fea05d1c40b3034e8107cd)
SDIO:
- qwlan30.bin (342cb50ce5c6ff930a65f341c0dfbc77)
- utf30.bin (f94810be89cc2f3e979ab4a57243872b)
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the Linux wireless driver for Qualcomm's chipset to the
new qcacld-3.0 driver.
This update is based on the release "r10016.1 - Post-CS3 1.0.016.1" from
"qca6574au-le-2-2-1_qca_oem" product branch, which uses for a Linux kernel v5.4
the tag "CHSS.LNX_FSL.5.0-01200-QCA6574AUARMSDIOHZ".
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 8c396281 ("layer: add dynamic-layers for NXP platform") introduced a
typo in the dynamic layer name.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit reverts partially the commit 548b8729 ("image_types: add support to
create CCMP15 ubifs images") to fix the boot partition generation.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This platform initializes the Bluetooth interface through the own bluetooth
driver, so the custom Digi init scripts are not needed.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the "Image" for the "zImage" as the default kernel image
type for the STM platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit avoids creating a subfolder for the kernel artifacts, to homogenize
it with the NXP platforms and avoid using custom recipes for the result
artifacts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe will download and install the required firmware binaries for
bluetooth and wireless interfaces. This recipe is based on the release
imx-hardknott-cynder_r1.0 (Wireless firmware v13.10.246.261)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes some STM recipes that are not
needed in our layer because they apply changes that
are not required in our DEY layer.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds u-boot build support for the CCMP15 platform.
The installation scripts are copies from the CC6UL platform.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7797
This code path was added in the context of single MTD layout support for
ccimx6ul boards, but it was being executed in the default storage layout use
case as well. This could trigger a race condition in which one code path
deletes the mount point while the other one is still setting it up, causing
partitions to not be mounted automatically (specifically, the "update"
partition).
Since both code paths are mutually exclusive in our implementation, reflect
this by making sure that the single MTD layout path is executed only when said
layout is enabled in the U-Boot environment.
https://onedigi.atlassian.net/browse/DEL-7827
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 9a7ea10a4dfb74651f865f125372604fe6840a10)
The sign mode needed for each platform is invariable, and since the platform
is already a mandatory parameter for the script, we can store this information
implicitly. Reflect this change in every recipe where the script is used, but
keep the variable at the Yocto level since it's still needed in several places.
https://onedigi.atlassian.net/browse/DEL-7862
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The license checksum and the source branch should be on the properly
versioned bitbake recipes. Otherwise, when we include this common file
in a different version linux recipe (for example, the upcoming 5.10) it
will inherit incorrect values.
While on it, fix the incorrect license checksum values for the linux 5.4
recipes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the US Board Data File (BDF) to include the changes
required to pass the EN 300 328 V2.2.2 blocking test.
The new BDF files are:
- ccimx6/bdwlan30_US.bin (eb3d3cdafd30b30e837974177a281648)
- ccimx8m/bdwlan30_US.bin (72531e6e0870673e4ba2b02bd551925b)
- ccimx8x/bdwlan30_US.bin (1cf667271da33f6eb207360eeb3d4d63)
https://onedigi.atlassian.net/browse/DEL-7773
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This makes it so bitbake obtains the SDMA firmware from the firmware-imx recipe
instead.
This also avoids including all of the linux-firmware packages in i.MX6 SDK
builds, preventing errors when building the ccimx6sbc SDK (linux-firmware
provides the community versions of the ath6k and ar3k firmwares, which clash
with our versions).
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This makes it possible to distinguish between two different packages:
* NXP's tensorflow-lite, which contains modifications for i.MX platforms
* Our tensorflow-lite, which is meant to be used with Google Coral
Since tensorflow-lite-coral provides a subset of the files provided by
tensorflow-lite (specifically, the python libraries), make the packages
conflict during runtime.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is used by the eIQ recipes, so make sure we have NXP's .bbappend
so it works as expected
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a small oversight on NXP's part, because this package is pulled in as a
dependency of imx-vpuwrap, but it's only compatible with their EVK board,
making the build fail on any other i.MX8MP board.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
It seems like the version of mkfs.vfat used in Yocto 3.3 has a label name
length limit of 11 characters. All of the labels for our current platforms
surpassed this limit ("Boot ccimxX" alone already occupies 11 characters), so
replace the machine name with "DEY"
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These variables were originally set in NXP's recipes, but they moved their
definitions to each platform's configuration file. Set the appropriate values
where needed. While at it, replace every mention of the SOC_TARGET variable
with its new name, IMX_BOOT_SOC_TARGET.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe we ported from meta-imx has the same version number (v2.4) and
bitbake chooses the meta-freescale version because said layer comes before
meta-digi-arm in the BBLAYERS. Since the meta-freescale version uses different
platform overrides, the build fails, so filter it out to use our version
instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The common license file GPL-2.0 is now called GPL-2.0-only in poky, so we need
to reflect this name change to avoid errors
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
NXP now uses the meta-freescale version of the imx-boot recipe as a base, and
applies a .bbappend in meta-imx to apply more customizations. Reflect this
in meta-digi-arm and merge said .bbappend with ours. While at it, omit one of
NXP's operations in their do_deploy, since it breaks our build and doesn't look
essential.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe is only compatible with the i.MX8MP EVK, so it might be
platform-specific or board-specific. Add it for now to be safe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe was missing from our layer, so add it just in case it's needed
by any new package.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update the recipes to v8.14. NXP changed the mechanism used to load the sdma
and regulatory firmware (they now use firmwared), so remove our ccimx8mm sdma
fw service for now and see if we need a similar workaround with the new
mechanism.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 3.2-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The AHAB decryption process takes the encrypted file from the address defined
in U-Boot and decrypts it into the address defined in this script. If both
addresses are the same, the decryption process ends up failing. This
happens even for signed-only images.
Maintain the original addresses in this script so they do not collide.
This reverts commit c970d87d5a.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
If IMAGE_FEATURE 'read-only-rootfs' is active, the rootfs image
will be SQUASHFS.
Remove other root file system images, such as ext4, ubifs, sdcard.gz
to avoid confusion and use by install scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot uses partition names instead of partition indexes for the nand devices.
This commit syncs the boot scripts with the new dualboot variables.
https://onedigi.atlassian.net/browse/CC6UL-1254
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These folders /mnt/linux, /mnt/update and /mnt/data are
created by the automount_block.sh script. In a read only
system, these folders are not created raising some errors.
Creating these folders solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Create this symbolics links in build time instead of doing it
in run-time. This simplifies the system and allows it to work
with read only filesystems.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Before this patch the MAC addresses were read from the device
tree in the qualcomm.sh script executed at init, and a creates
a file where the MAC where located.
In 0a92f5d9e8df644de74e74f152ed6ff3dd8d3369 in the qca driver
the support to read these MAC addresses from the filesystem
was added.
This commits creates the simbolic link between the device tree
and the expected path where the MAC addresses where located, and
gets rid of the file with the MAC addresses.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
mkimage logs are required for signature on CC8X and CC8M platforms. Create a
copy in the 'imx-boot-tools' deploy directory so a prebuilt imx-boot file can
be later signed using the standalone signature procedure.
Build the 'print_fit_hab' target unconditionally so the log is available for
future standalone signature processes.
Also, use 'CONFIG_MKIMAGE_LOG_PATH' and 'CONFIG_FIT_HAB_LOG_PATH' variables to
point to the logs before calling the sign scripts. We no longer require
creating a symbolic link of the log files.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This change was accidentally reverted when merging to dey-3.2/maint, causing
the qualcomm module to be missing in the rootfs.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
By default, all platforms except ccimx6qpsbc work at 400 kHz on the i2c bus
connected to the ATECC508A crypto chip.
https://onedigi.atlassian.net/browse/DEL-7727
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Re-use RAMDISK address for authenticating the rootfs instead
of allocating a new address (if authenticating a rootfs, we're
not using a ramdisk).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add missing call to 'uuu' and erase the partition before creating
the UBI volumes.
Also add larger timeouts to erase operations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The config file /etc/fw_env.config is generated dynamically basing on
the partition table and, in the case of NAND-based SOMs, on the NAND
geometry. This is done on a postinst script that modifies the file on the
first boot of the target. Since this is not allowed on read-only-rootfs,
this commit adds a default fw_env.config file to use instead when
read-only-rootfs is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
This allows the packages to be included in the ccimx6sbc images. While at it,
include the Qualcomm bluez patches in ccimx6 builds. These patches aren't
destructive, they simply add functionality required by the Qualcomm chip, so
they shouldn't have any secondary effects when using the Atheros chip.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Other layers, such as meta-digi-dualboot, may add scripts to this
list on their layer.conf file. Depending on the order and priority
of layers, using a strict '=' here completely overrides previous
values, which is not desired.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add the '-m' parameter. Without it, the script doesn't
generate the output merged configuration file, and the
fragments are not applied.
- Fix the if condition. The '*.cfg' expands to a list of
files, but the '-f' only admits one parameter. Use instead
the Python find_cfgs() function.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable 'dualboot' (and 'singlemtdsys' for CC6UL) was restored
after the bootcmd that runs the first time after programming U-Boot runs
fastboot again to resume the script.
This is ok for the CC6UL but not for the rest of platforms, that run the
partition script on the bootcmd, *before* running fastboot.
Restore the variables for all platforms in the bootcmd right after
resetting the environment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot has embedded support to handle bootcount tries.
When the limit of tries is reached, U-Boot runs the script
in `altbootcmd` rather than the usual `bootcmd`.
This other script resides on meta-digi-dualboot layer.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Ensure stdout redirection to the USB interface is removed in every case.
Otherwise, it would be left redirected when INSTALL_UBOOT_FILENAME is
manually set.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Install scripts may rework the partition table basing on the value of
env variables. Information of UBI volumes may remain on the NAND that
could later not correspond to the new partition table.
Make sure the MTD partitions are erased prior to updating:
- For Multi-MTD, append '-e' option to the update command.
- For Single-MTD, erase the system partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Check the status of 'dualboot' env variable.
If set to "yes", use the dualboot partition table in the script and
restore the variable (default is "no") after resetting the environment.
Also, for dualboot, there's no need to wipe the recovery partition or
boot into recovery mode.
For dualboot, this script programs both systems A and B with the same
images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7649
Commit c33fc8a7fe wrongly used
https protocol when using MTK remote when it should have been
ssh.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This is necessary for images that have SELinux enabled. Aside from changing
some package configurations and including an additional library in the rootfs,
this change has no apparent effects on the core functionality of the system.
https://onedigi.atlassian.net/browse/DEL-7641
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows users to apply small changes to our kernel configuration without
having to create a completely new defconfig. Use a simplified version of the
kernel-yocto.bbclass implementation.
https://onedigi.atlassian.net/browse/DEL-6706
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The default policy provided by meta-selinux breaks a lot of the features in
DEY, so adapt it to make most features work. Note that this is simply an
example, end users should create their own policies for their own needs.
Make these changes toggleable so that users can use the reference policy
instead.
https://onedigi.atlassian.net/browse/DEL-7641
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package includes a script that is executed by a udev rule that we
currently include in our sysvinit images. Without it, the regulatory firmware
mechanism is broken and an error appears when booting the system.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When we added the SDMA fw systemd service, we accidentally made it so that all
scripts were installed only when using systemd. These files are still needed
when using sysvinit, so correct this change.
While at it, include the SDMA fw service in firmware-imx-sdma's FILES.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When DualBoot mechanism is enabled and an update is pending,
the boot script needs to change certain variables and save the
environment.
The regular boot script already changes a number of variables,
such as 'extra_bootargs' and 'overlays' by appending strings to
the already existing values. Saving the envionment may make these
grow endlessly with each iteration of the boot script.
For this reason, move the DualBoot check as the first thing in
the script, save the environment if needed, and then continue
with the normal flow, that changes variables before booting
but doesn't save them.
On certain scripts, this allows us to get rid of some instructions
for resetting the overlays variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The script required the passing of option '-b' for setting up the
target to use a single MTD partition and multiple UBI volumes.
If a target however already has the variable 'ubisysvols' set to
'yes' but this parameter is forgotten when calling the script, the
partition layout would change to default (several MTD partitions).
Remove the recently added '-b' option and make the script decide
basing on the current value of 'ubisysvols' variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The script preserves the current value of env variable 'ubisysvols'
so that the new partition script generates the appropriate partition
table before proceeding with the update operations.
If using a UBI volumes layout, the script will not erase the partitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7614
With U-Boot supporting the creation of mtdparts and UBI volumes depending
on the value of variable 'ubisysvols', adapt the install script to make
use of those to generate a partition table and UBI volumes accordingly.
This can be triggered with new option '-b'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Set the new variable 'rootfsvol' to rootfs_a or rootfs_b when dualboot is
enabled, to cover the case where the devices uses the 'system' partition
with different UBI volumes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The support for dualboot was integrated on meta-digi-dualboot layer, but it
really depends only on environment variable 'dualboot' so we'd better
integrate the support on the scripts in meta-digi, to avoid synchonization
problems between both layers.
This also allows to be able to easily enable dualboot in U-Boot with the
variable, without needing to update the script on the linux partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Traditionally, platforms based on NAND, used one UBI volume
per MTD partition.
Now it's possible to use only one MTD partition containing many
UBI volumes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7614
Enabling DIGI_INTERNAL_GIT defaults to LOG server. The build from local
MTK Digi server was broken.
Fix uboot and linux recipes declaring different repo paths depending on
whether the local remote is LOG or MTK.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This package includes a script that is executed by a udev rule that we
currently include in our sysvinit images. Without it, the regulatory firmware
mechanism is broken and an error appears when booting the system.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When we added the SDMA fw systemd service, we accidentally made it so that all
scripts were installed only when using systemd. These files are still needed
when using sysvinit, so correct this change.
While at it, include the SDMA fw service in firmware-imx-sdma's FILES.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This command was already present on the script used for CC8X. Add it here
so the scripts are as much alike as possible.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Fastboot is configured on boot with the current MMC configuration.
If we create a GPT partition table, we need to restart fastboot before we
try to program any partition with the 'flash' fastboot command.
Set 'fastboot_dev' to a different device, 'sata' for example an back to 'mmc'
to trigger a fastboot restart after creating the partition table on blank
devices.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Includes:
- add support for getting properties from the ROM bootloader.
- flash layout extra check by asking flash size to the MCA bootloader.
- flash layout extra check by asking flash size to the MCA.
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
The current syntax only works properly when running the script through bash.
Change this so that it works for other shells as well.
While at it, fix a typo in the message that appears when the variant can't be
detected in the 6UL script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We document how to use this script from the Yocto image directory. Now that the
*.ext4 files are compressed by default, the script needs to automatically
decompress said files before starting the update process.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These images are comprised of the bootloader, linux and rootfs images. Since
the rootfs images are highly compressable, we can compress the .sdcard file as
well to reduce the space taken up by build artifacts.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since these images are highly compressable, this greatly reduces the amount of
space taken up by build artifacts.
Modify the code used to generate the .sdcard and .installer.zip files so that
they contain the decompressed .ext4 image.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds the Edge TPU simple camera examples to exercise the Google
Coral devices with Digi Embedded Yocto.
https://onedigi.atlassian.net/browse/DEL-7547
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the required libraries and packages to exercise the Google
Coral devices with Digi Embedded Yocto.
https://onedigi.atlassian.net/browse/DEL-7547
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The install script of cc8x had errors (using double '==' instead
of single on comparisions).
Besides fixing this typo, this commit changes the logic to:
- default to 2GB U-Boot for variants other than the ones in the
list.
- consider variant code 0x00 (not programmed HWID) as a failure.
thus forcing the user to specify the file on the command line.
This second action is done also on the cc6ul script.
Reported-by: Hector Bujanda <hector.bujanda@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update US Board Data File to include the changes required to pass the
EN 300 328 V2.2.2 blocking test.
The new BDF is:
- bdwlan30_US.bin (24140b5c28256cadfd95bc28fc574733)
https://onedigi.atlassian.net/browse/DEL-7576
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
install_abort is a temp variable so 'test -n' doesn't work on it.
This was fixed in all scripts except the USB script of ccimx6sbc.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Check the existence of files before the 10 second wait.
- Print the list of filenames to program to each partition.
- Print the file that's being updated to each partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the generalization done in previous commits, we have now several files
that are identical and can be merged into a common SOM or SOM family
folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Create global variables:
DEFAULT_IMAGE_NAME
GRAPHICAL_IMAGES
to have them substituted on the U-Boot install scripts for better
generalization.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot install scripts (from uSD and USB) were hard-coded to dey-image-qt.
Allow to install other image files by setting a new variable 'image-name'
which defaults to 'dey-image-qt' if not defined, except for the CC6UL
SBC Express, that defaults to 'core-image-base'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7385https://jira.digi.com/browse/DEL-7333
On these boot scripts, this variable is not used, so we can remove it.
Besides, it's generated by U-Boot code.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Use ##MACHINE## placeholder to have it later substituted by the recipe
using Yocto ${MACHINE} variable.
This will help later reducing the number of files to have one per SOM
(or even family) instead of one per platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, the name of the file will be "u-boot-dey-initial-env", causing
errors when reading the default environment from userspace, since libubootenv
expects "u-boot-initial-env" instead.
https://onedigi.atlassian.net/browse/DEL-7566
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds the sdma-firmware.service to the rootfs
to load the SDMA firmware during boot, that is necessary
for some drivers to work correctly.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Non-graphical images (core-image-base, dey-image-aws) don't contain the
graphic-backend on their filenames.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Determine first the filenames and abort if any does not exist.
- Print a warning message about the erasing of the media with a list
of partitions and files to use for the update
- Sync the different scripts so they look more similar
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7333
Similar to how it's done on the ccimx6ul, create a function for updating
a partition with a file, that also prints a message.
Rename the function to be the same in all scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7333
Previously, this script only allowed the U-Boot filename as parameter.
This commit makes use of getopts() to pass the following options to the
script:
-h, for help
-i, to pass the dey image name that prefixes the firmware filenames
-n, to skip the 10 seconds delay that allow you to cancel the process
-u, to pass the U-Boot filename
The default image name (if none passed) keeps being 'dey-image-qt' but the
new option allows reusing this script to install dey-image-webkit or
dey-image-aws images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7385
The prebuilt 'athtestcmd' binary allows you to test tx/rx of the
Wi-Fi MAC, when the driver is loaded in test mode.
This is required for certifying Wi-Fi in products, so add it by
default for the ccimx6sbc.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7444
(cherry picked from commit acb402fdcfa54d8d5519580ff7fcfb76fbed3f49)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit backports a patch to fix the following build issue with
the GCC v10:
dtc-parser.tab.c:1069: multiple definition of `yylloc'
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since this feature was introduced in newer versions of U-Boot, we need
to disable it for v2017.03 to avoid several compilation issues.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This version is only required to build U-Boot 2017.X, so since CC6UL was moved
to a new U-Boot version it is not necessary and also fixes a build issue.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update US Board Data File to use the new GOLDEN2 calibration.
The new BDF is:
- bdwlan30_US.bin (328f970444b5eaaa48c0188cea1685e3)
https://jira.digi.com/browse/CC6UL-1210
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 373b3958bad9d0c462349d89ef5832e843624b01)
This commit fixes the following warning:
WARNING: meta-digi/meta-digi-arm/recipes-bsp/trustfence-cst/trustfence-cst_3.3.1.bb:
Recipe trustfence-cst sets S variable with trailing slash '/tmp/work/aarch64-dey-linux/trustfence-cst/3.3.1-r0/cst-3.3.1/',
remove it
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This default environment is needed by packages like libubootenv.
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package has been entirely replaced with libubootenv
https://jira.digi.com/browse/DEL-7410
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a replacement for u-boot-fw-utils. Adapt the u-boot-fw-utils patches
to this new library and include the same logic as the u-boot-fw-utils recipe
(generate and install the U-Boot environment configuration file in the rootfs)
For now, remove the u-boot-default-env dependency, since the package doesn't
exist in zeus.
https://jira.digi.com/browse/DEL-7410
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 4ab569fb("recipes-*: refine restrictions for NXP BSP") from
meta-freescale layer restrict the use of certain recipes and classes to
enforces them to use a NXP BSP. This is done by adding a new MACHINEOVERRIDES
called "use-nxp-bsp"
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit ffeb0556("classes: fsl-kernel-localversion: Fix task dependency") in
meta-freescale layer fixes a task dependency issue, so do_preconfigure() was
renamed to do_kernel_localversion().
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The new SCFW re-enables "Read DBI deskew configuration"
setting, to support Nanya LPDDR4 chips.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/CC8X-297
Add a patch series to customize the ATF console for the ConnectCore 8M platforms,
and to disable the Cortex-M debug UART.
https://jira.digi.com/browse/DEL-7497
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update file:
- bdwlan30_US.bin (93a58f0f8e241bef6600d53d013c3cb2)
This file was generated by calibrating several v3 CC8MN SOMs and
merging their resulting BDF files into a new Golden file.
Target output powers tables and CTL tables remain intact.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
CTL limits comply with FCC, CE and TELEC certifications.
https://jira.digi.com/browse/DEL-7487
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit cceffef831edd10b017aac3006636c98f7baa0a9)
Update file:
- bdwlan30_US.bin (93a58f0f8e241bef6600d53d013c3cb2)
This file was generated by calibrating several v3 CC8MN SOMs and
merging their resulting BDF files into a new Golden file.
Target output powers tables and CTL tables remain intact.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
CTL limits comply with FCC, CE and TELEC certifications.
https://jira.digi.com/browse/DEL-7487
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit cceffef831edd10b017aac3006636c98f7baa0a9)
There's a Yocto configuration option that enables this feature in U-Boot, but
since imx-boot images are signed using the scripts in trustfence-sign-tools,
said configuration is lost and the scripts don't take it into account if it's
enabled. Make sure that the configuation carries over to the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Attempting to boot encrypted artifacts on these platforms will result in HAB
events caused by CAAM errors. This is due to the CAAM being configured for
non-secure contexts (in regards to Trustzone) while the HAB expects it to be
configured for secure contexts.
For now, only sign artifacts for these platforms even if the project has the
encryption feature enabled.
https://jira.digi.com/browse/DUB-993
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Allow users to select Certified Bluetooth 4.1, rather than
the default not-certified Bluetooth 5, through the use of variable
BT_FW_VERSION="4"
md5sums:
nvm_tlv_3.2.bin ==> 9621f50172f2bfb4f65f8e5c6528b614
rampatch_tlv_3.2.tlv ==> 769e1fc9e5a2061bb3aaa1f32dac3804
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This overlay added cooling devices for all quad cores.
On the latest BSP, the SoC device tree include contains all four
cooling devices and the newest U-Boot is able to delete the nodes
for non-existing cores, so there's no need for this overlay
anymore.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, mkimage will delete the device trees between imx-boot builds,
causing the build to fail when generating a signed imx-boot.
https://jira.digi.com/browse/DEL-7420
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
ConnectCore 8M Mini has support to VPU but the library used is different than
the used by the i.MX6 processors. This recipe manages the required libraries
to operate with this kind of VPU.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Required for the release rel_imx_5.4.70_2.3.0 based on zeus
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update the MACHINE values with the ones in meta-freescale and meta-imx layer.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Cortex-M4 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Mini DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Both ConnectCore 8M platforms share the same U-Boot build process,
so apply the same changes for them.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When manually changing the partition table, it could happen that
a UBI volume already exists in the 'update' partition.
If not erased, the system may find the old UBI volume (with wrong
geometry information) and try to mount it which will result in
failure.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On commit 1e5cafeb79 a fall-back
update command was introduced in case the newest command fails.
If the newest command succeeds, however, the 'test' command for
error doesn't match (there is no error) and the return code of
such test is "1". On the next check for errors, this results on
an error, when we really mean to continue because the first
command was successful.
Move the second error check inside the error path of the first
attempt.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
In order to revoke SRKs in platforms with AHAB we need to set a mask
during the signing/encryption process.
Create new TRUSTFENCE_SRK_REVOKE_MASK variable to export the
SRK_REVOKE_MASK variable required by the imx-boot signing script.
The revoke mask is not necessary for signing/encryption of other artifacts,
so set it by default to 0x0.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add support to sign and encrypt OS artifacts for AHAB devices.
https://jira.digi.com/browse/DEL-7371
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 'source file system' was removed as an argument from the
'update' command in U-Boot v2020.04.
For platforms using such version, remove it from the update fw
scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-983
This command isn't essential and might not be available on all systems, so
remove it. Use the "oflag=sync" dd parameter instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
A similar change was done in the dey-3.0/maint branch for the uSD installation
scripts, but since USB scripts were added in dey-3.0/master, apply the same
to them as well.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since this component pulls in Optee dependencies, which in turn depend on
packages from meta-python2, add this layer to the ccimx8mn-dvk's default
bblayers.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-7025
Since there is only 1 supported version of cst, the include file is
only used once.
Move all the recipe implementation to the *.bb recipe and remove the
*.inc file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Since cst-3.3.1 is now distributed with a BSD-3-Clause license, it is allowed
to distribute its source code from the Digi FTP.
Fetch the tarball from that location.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
CC8X SOMs code the RAM size on the OTP bits so this fall-back table
shouldn't be necessary, but update it with latest variants just
in case.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This machine was not building the 512MB 16bit U-Boot.
While on it, and for consistency, re-order to make the 2GB 32bit
the default (same as the SBC Pro), since the SBC Express was
discontinued as a product.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7363
Add Compliance Test Limits (CTL) information for FCC, CE and TELEC
certifications to the CC8MN US Board Data File.
The rest of the file (calibration, target power levels, etc.) remains
intact.
Updated file:
- bdwlan30_US.bin (MD5SUM: f9600f7bf4d601494b9bbe1ccbe94d6a)
https://jira.digi.com/browse/DEL-7359
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
CST was being built linking to the openssl libcrypto library from the host.
When the openssl version in the host didn't match the version in the SDK,
the SDK build failed like this:
Error:
Problem 1: package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Problem 2: package nativesdk-packagegroup-qt5-toolchain-host-1.0-r0.0.x86_64_nativesdk requires nativesdk-packagegroup-sdk-host, but none of the providers can be installed
- package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Fix that by adding the native dependencies include and lib folders to
the CST build. Also add openssl-native as a dependency for the SDK build,
otherwise it wont link to the SDK libcrypto library.
Additionally, to allow running CST in a host machine where the openssl version
does not match the version in the SDK, libcrypto library is statically linked.
https://jira.digi.com/browse/DEL-7346
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a95b3ad602)
CST was being built linking to the openssl libcrypto library from the host.
When the openssl version in the host didn't match the version in the SDK,
the SDK build failed like this:
Error:
Problem 1: package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Problem 2: package nativesdk-packagegroup-qt5-toolchain-host-1.0-r0.0.x86_64_nativesdk requires nativesdk-packagegroup-sdk-host, but none of the providers can be installed
- package nativesdk-packagegroup-sdk-host-1.0-r12.0.x86_64_nativesdk requires nativesdk-trustfence-cst, but none of the providers can be installed
- conflicting requests
- nothing provides libcrypto.so.1.0.0()(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.0)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
- nothing provides libcrypto.so.1.0.0(OPENSSL_1.0.1)(64bit) needed by nativesdk-trustfence-cst-3.3.1-r0.0.x86_64_nativesdk
Fix that by adding the native dependencies include and lib folders to
the CST build. Also add openssl-native as a dependency for the SDK build,
otherwise it wont link to the SDK libcrypto library.
Additionally, to allow running CST in a host machine where the openssl version
does not match the version in the SDK, libcrypto library is statically linked.
https://jira.digi.com/browse/DEL-7346
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Create scripts to install DEY firmware using a USB stick.
https://jira.digi.com/browse/DEL-6802
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
U-Boot v2020.04 for the CC6UL supports the fastboot protocol.
Create scripts to install DEY firmware via USB using uuu
tool.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update file:
- bdwlan30_US.bin (388da992fdf0bd25e62060247a0606e5)
This file was generated by calibrating several v3 CC8MN SOMs and
merging their resulting BDF files into a Golden file.
It also encodes the Target output powers tables.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
https://jira.digi.com/browse/DEL-7290
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Includes:
imx-vpu: Fix selected version for 6Q and 6DL [LF-1816]
An older version of imx-vpu, from upstream, is being selected
for the image instead of the current one. The problem is
the override imxvpucnm used for the COMPATIBLE_MACHINE
is no longer being used. Update the recipe to use SOC
overrides instead.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Hector Bujanda <Hector.Bujanda@digi.com>
Includes:
imx-seco-libs: Switch branch to imx_5.4.47_2.2.0
multilib: imx-seco-libs: Fix LIBDIR
imx-seco.inc: use c0 for 8dxl phantom with new c0 boards
Signed-off-by: Hector Bujanda <Hector.Bujanda@digi.com>
Includes:
imx-boot_1.0.bb: Update M4 binary name for i.MX 8QM [YOCIMX-4866]
8QM M4 demos unified the binary name.
Change name make it more easy for understanding.
imx-boot: Update the build option for iMX 8DXL Phantom C0 new boards [YOCIMX-4663]
Signed-off-by: Hector Bujanda <Hector.Bujanda@digi.com>
Build the U-Boot for variants with 1GB of memory and make the installation and
boot scripts recognize all of the current variants.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since this overlay is only used in the SBC Pro bootscript, have a separate
bootscript for the SBC Express.
https://jira.digi.com/browse/DEL-7276
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update file:
- bdwlan30_US.bin (8c8b575fb9a65714df0b7c6cb3399ed6)
This file was generated by calibrating several CC8MN SOMs from spin 3
and merging their resulting BDF files into a Golden file.
It also encodes the Target output powers.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add the ccimx6/6qp and update the ccimx8x supported U-Boot version. Even though
older versions of U-Boot can be built for the 8X, the dependencies with the
SCFW only make it possible to use the latest version of U-Boot to avoid
unexpected behaviour.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The boot script appends values to certain variables such as
$extra_bootargs and $overlays.
If the final instruction of the boot script (dboot command)
fails, these variables contain the new values, plus the original
one. Since the user recovers the prompt, he may do a 'saveenv'
to save the environment, and the modified variables will be
saved, only to be enlarged again on the next boot.
This can lead to repeated strings on such variables.
Save the original value and restore it in case of failure on
the dboot command.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Follow the syntax:
_ov_<som|board>_<functionality>[_<hardware>].dts
where:
_ov_ identifies the file as an overlay.
som|board identifies whether the overlay applies to the SOM
or to the carrier board.
functionality identifies the function of the overlay.
hardware identifies the hardware to which the overlay
applies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Wrapping unterminated lines doesn't work for scripts (even
if they contain the backslash).
Substitute with full non-wrapped if/elif sentences.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7252
In the ccimx6sbc, since each SOC has a separate set of device trees, we can use
the soc_family environment variable when generating the name of the final
device tree in the bootscript. However, for the ccimx6qpsbc, there is only one
set of device trees with the "imx6qp" prefix, even though there are SOC
variants such as the imx6dp. Running the bootscript on a ccimx6qpsbc with an
imx6dp SOC assembled will result in a failure, since it will look for a
non-existing device tree starting with a "imx6dp" prefix.
Stop using the soc_family variable and hardcode "imx6qp" instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the latest version of imx-mkimage, the original dtb file is being
removed at the end of the build.
Add a patch to preserve it and be able to run several builds during the
same compile run, like we do for imx-boot signing.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
With this change, the ccimx6sbc and ccimx6qpsbc default images will now use the
xwayland backend instead of x11.
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Remove all v4.9 recipes and build Linux using the same branch on all platforms.
The .inc files were only needed because of the existence of multiple Linux
versions, but that's not the case anymore, so remove them.
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The CST package requires byacc to compile, and even though this dependency is
met when building images for the target, said dependency needs to be made
explicit when the package is built for the SDK in order to avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the previous solution we would need to generate
multiple overlays for each soc_type, so if we have a
new soc type (for example the solo), we would need
to generate 3 different overlays.
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This commit fixed the sdcard generation when encryption is enabled.
In the sdcard image always is included the signed image instead of the
encrypted.
https://jira.digi.com/browse/DEL-7200
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This version supports encryption for devices with Advanced High Assurance Boot
(AHAB) capabilities. This commit also updates and simplifies Digi custom
patches.
https://jira.digi.com/browse/DEL-7175
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add running 'mmc partconf 0 1 1 1' command to the uuu scripts after
writing the new U-Boot into the internal eMMC.
This is required for blank eMMCs on CC8MN and CC8X SOMs where the
'update' command has never been run to be able to boot from eMMC.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The encryption of the U-Boot environment uses the HWID as key
modifier. The HWID was being read using the fsl_otp driver sysfs
entries and over two words. The driver is now deprecated and also
the cc8x and cc8m platforms have different number of HWID words.
This patch modifies the function that reads the HWID words by
using new entries on the device tree 'digi,hwid_X' where X is the
index of the HWID word.
It also removes the need to select CONFIG_MD5 which is already
auto-selected on sandbox_defconfig by other config switches.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit 8ced362766)
The encryption of the U-Boot environment uses the HWID as key
modifier. The HWID was being read using the fsl_otp driver sysfs
entries and over two words. The driver is now deprecated and also
the cc8x and cc8m platforms have different number of HWID words.
This patch modifies the function that reads the HWID words by
using new entries on the device tree 'digi,hwid_X' where X is the
index of the HWID word.
It also removes the need to select CONFIG_MD5 which is already
auto-selected on sandbox_defconfig by other config switches.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
The Cortex-M7 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Nano DVK board to avoid conflicts.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Store mkimage log for every built target so it can be later used by the
signing script to create the correct CSF file for every target.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The mkimage.log file is required by the signing script to create the CSF file.
Since there is one mkimage log file per target, update the mkimage.log symlink
right before signing the imx-boot file to ensure creating the CSF with the
corresponding mkimage log for every target.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit updates the M7 demos to new package version v2.8.0
of the new NXP release imx-5.4.24-2.1.0.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit updates the M4 demos to new package version v2.8.0
of the new NXP release imx-5.4.24-2.1.0.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit updates to the NXP imx-5.4.24-2.1.0 BSP.
Including following changes
In M4 MCUX SDK 2.8.0, it added PMS demo for CM40 to support Partition
reboot feature besides rpmsg pingpong. So change the m40 default image
to imx8qm_m4_0_TCM_power_mode_switch_m40.bin
Build i.MX 8DXL flash_linux_m4 with V2X off
Use option V2X=NO to switch V2X off.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
imx-boot files for target flash_regression_linux_m4 fail the signature
process, so skip them while signing the rest of the targets.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The cryptoauthlib package is being added in digi-defaults.inc, which is parsed
before this file. Setting the variable here overwrites its previous value,
causing the cryptoauthlib package to be left out of the rootfs. Append to the
variable instead of overwriting it to avoid this.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Aside from adding the wireless-regdb-static support, this NXP package needs to
be included in the rootfs so the regulatory fw gets loaded in userspace.
https://jira.digi.com/browse/DEL-7133
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Starting with Linux v4.15, regulatory domains are no longer handled via CRDA,
but via the kernel and a flexible database instead. Said database is included
in the wireless-regdb-static package, which conflicts with the old
wireless-regdb package.
To accomodate for this new package, add CRDA as a dependency for ccimx6
platforms only, and incorporate wireless-regdb-static for the rest of the
platforms. Additionally, the ccimx6 kernel should inherit the
kernel_wireless_regdb .bbclass so the plaintext database is copied to the
kernel sources, but since we use the same recipe for all kernel versions and
ccimx6 platforms are not yet supported in zeus, omit this change for now.
Remove the package-base .bbappend, since only ccimx6ulstarter images include
that packagegroup and they require wireless-regdb-static, anyway.
By adding the regulatory database, we avoid delays when going to suspend,
caused by the kernel waiting for the database to appear.
https://jira.digi.com/browse/DEL-7133
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When loading the wireless driver in test mode, the UTF firmware file
is loaded.
On pcie chips, the UTF file is expected to be named 'utf.bin'.
On sdio chips, the UTF file is expected to be named 'utf30.bin'.
Rename the pcie UTF file to match this requirement.
md5sum
----------------------------------------------------------
qca65X4_pcie: utf.bin -> 41cfb4e50613cd0eeb0fa99a005131bd
qca65X4_sdio: utf30.bin -> 4743dee015047752e433e69f4db89974
https://jira.digi.com/browse/DEL-7086
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add Compliance Test Limits (CTL) information for FCC, CE and TELEC
certifications to the CC8X US Board Data File.
The rest of the file (calibration, target power levels, etc.) remains
intact.
Updated file:
- bdwlan30_US.bin (MD5SUM: 100a982b33b4a2cfeb34cdea794dc6d6)
https://jira.digi.com/browse/DEL-6995
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Perform AHAB signing process without altering the original file.
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When the Bootloader is an 'u-boot' select the correct u-boot
signed image to compose the sdcard artifact.
Signed u-boot artifacts start with 'u-boot-dtb-signed-'.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When the Bootloader is an 'imx-boot', select the correct imx-boot
signed image to compose the sdcard artifact.
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signed imx-boot files had the '-signed' appended at the end of the file.
Add it after the file prefix instead, so it is easier to replace using an
unsigned file for a signed one just by changing the file prefix.
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The '-fmacro-prefix' option is a new GCC option introduced in gcc version 8.
To keep compatibility with previous GCC versions, remove this option from
the DEBUG_PREFIX_MAP list so nativesdk builds are able to compile this recipe.
Following is the compilation issue avoided by this patch:
| gcc: error: unrecognized command line option ‘-fmacro-prefix-map=<yocto-workspace>/tmp/work/x86_64-nativesdk-deysdk-linux/nativesdk-imx-mkimage/git-r0=/usr/src/debug/nativesdk-imx-mkimage/git-r0’
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This recipe is now built as native and nativesdk by means of the
BBCLASSEXTEND configuration.
Remove every remaining legacy native configuration since all will be covered
by the class extension.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This service is the same as the one provided by NXP, but with altered
dependencies. Start it before the kernel modules are loaded so the firmware is
ready by the time the mcp25xxfd module is loaded.
https://jira.digi.com/browse/DEL-7114
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Disable all encryption support by default on CC8X and CC8MN platforms so
the default built images can be directly built.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
LINUX_ARM64 images include the padding length in the size property of
their header, so for these images read the header size property instead
of calculating it with 'stat'.
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
If CONFIG_SIGN_MODE is unset, we were assuming the sign mode to be AHAB
whereas it is preferable to abort the signing process and notify with an
error message.
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The signing script is used for signing multiple artifacts, not just the
kernel, so rename it for a broader use.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signing with AHAB mode only requires an additional prior step, so
reuse as much code as possible.
Also, for Image.gz images, sign the uncompressed Image and later
compress the result.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signing with AHAB mode only requires an additional prior step, so
reuse as much code as possible.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
TRUSTFENCE_SIGN_MODE for ccimx8mn is "HAB", although the
BOOTLOADER_IMAGE_RECIPE is "imx-boot".
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Includes:
- add io reset support including edge detection.
https://jira.digi.com/browse/CC6UL-1132
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
imx-mkimage is a host recipe to provide the mkimage_imx8 binaries, required
for the trustfence support with platform based on AHAB (ccimx8x). Since
these binaries are required to the sign process we need to export it in the
SDK to allow the standalone sign mode, and with that we can simplify the
mechanism to share these binaries with another recipes (u-boot, linux).
Also the do_deploy() from imx-mkimage recipe was removed to avoid overriding
the implementation from the native class and allow populating the mkimage
binaries.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 3fbd38ca ("imx-boot: build ccimx8x images for B0 and C0 silicon
revisions") added support to build images for B0 and C0 revisions,
forgetting include this support on trustfence builds.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe takes several binaries demo for the Cortex M7 CPU,
and are provided in the deploy directory.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This update is a cosmetic one and removes the RAM frequency from the SCFW
filenames. Reflect this change in the RAM_CONFIGS variable and in the uSD/UUU
installation scripts.
As a result, the imx-boot filenames will no longer have the RAM frequency
either.
https://jira.digi.com/browse/DEL-7096
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The scripts need to know the SOC's revision to be able to select the correct
imx-boot image. Modify the boot-artifacts bbclass so the renamed imx-boot files
are included in the installation .zip.
Also, bypass the SECO fw check in the uSD script so it can install future
versions that aren't recognized by U-Boot's SECO fw checking logic. The UUU
script doesn't require this bypass, since it doesn't use the Digi update
command to flash the bootloader.
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Modify the imx-seco recipe so it deploys the B0 and C0 versions of the SECO
firmware, Then, modify the imx-boot recipe so it builds every possible
combination of:
* RAM configuration
* imx-boot target (with and without M4 demos)
* Silicon revision
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the device tree overlays mechanism in place, the bootscript
doesn't need to set the fdt_file variable. Instead, it will use
the value it has (which can be changed by the user) and it will
simply update the 'overlays' variable with the device tree
overlays that apply basing on the hardware capabilities found
on the HWID, SOM version, and carrier board version.
This allows a user to override the default fdt_file to point
to his custom device tree, but still make use of the boot script
for hardware-detected overlays.
Without the need to set the base filename, the boot script is the
same for any carrier board of the ccimx8x SOM, so this commit
moves it to a common folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Each platform now has only one base device tree, meant for the i.MX8DX variants
of the ccimx8x boards. Apply the QXP overlay in the bootscript if the SOC is
identified as an i.MX8QXP.
Since we want to give this overlay a higher priority than the SOM overlays
(wifi and bluetooth), prepend it to the overlay list after appending the SOM
overlays.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These overlays aren't handled in our bootscript, but we make them available for
users in case they wish to use alternative interface configurations.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the old wb device trees from the ccimx8x-sbc-express and ccimx8x-sbc-pro
configuration files and add the ccimx8x wifi and bt overlays. Modify both
platforms' bootscripts to apply the overlays depending on board_id, hardware
capabilities or module variants.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The function that parsed the output for a U-Boot variable value
was receiving a multi-line output, with blank lines that were
not being properly processed.
Simplify the parsing by using 'sed' command.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-951
The if condition expanded to nothing so the install command was
never called. Apart from that the install command was wrong and
missing the '-m' option for modifier.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This allows to generalize the code instead of needing to replicate
overrides for each platform that contains the MCA.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable BT_DEVICE_NAME is used to name the Bluetooth device name on
the BlueZ configuration file. Re-use the contents of DIGI_FAMILY (except
for ccimx6qp which re-writes it) to simplify platform definitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- WLAN_P2P_INTERFACE is the same for all platforms: "p2p0".
- WLAN_P2P_DEVICE_NAME can be built out of ${DIGI_FAMILY} except for
the ccimx6qp, that's why it has a weak default assignment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Platform-based variable STORAGE_MEDIA, allows us to select the
correct configuration file without needing to replicate it per
platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This overlay is not handled in our bootscript, but we add it to the Linux
partition in case users want to apply it manually.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Parse the hardware version from the HWID and load the overlay if and only if
the revision is "1". Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-7070
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of having two separate device trees for the non-wireless and wireless
variants of the ccimx8mn, use the non-wireless .dtb as a base and apply the
overlays in the bootscript depending on the variant's capabilities.
Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This reverts commit 03d40edfd0.
The build of U-Boot without the flags field, incorporated changes
that made the Cortex M4 acquired certain resources (like GPIOs)
that were later not available for the Cortex A35 cores.
Revert this patch so that such changes only take place on images
that contain the M4 applications.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7073
(cherry picked from commit 28ce9340f55a35199dacf1bcbf83dc016b6a2fc7)
Update to NXP's v1.4.0 porting kit, fix an issue with resource allocation
making some GPIOs unusable from the Cortex A35s and update the DCDs using NXP's
RPA v14.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi customized linux kernel gpio.h file to allow debounce functionality by the
user space through the character device.
This commit patches the gpio.h file that is used to generate the SDK (which comes
from kernel 5.4) with Digi debounce additions.
https://jira.digi.com/browse/DEL-7027
Signed-off-by: Hector Bujanda hector.bujanda@digi.com
Added rsync to the native dependencies, since it is used during
header install to prevent a build issue.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Default version is defined in poky layer, this commit also modifies
the preferred version to match with the new one.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove support to kernel v4.14 and move platforms to use the new
kernel v5.4
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
packagegroup-base includes wireless-regdb-static package unconditionally,
however it conflicts with wireless-regdb that it is required by crda,
which is included as a dependency to packagagroup-dey-wireless.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In meta-freescale was renamed the linux-imx-headers recipe with the
full linux kernel version "4.14.98". With that change our custom
recipe from meta-digi is not selected. This commit reuses the recipe
from meta-freescale layer and modifies it.
https://jira.digi.com/browse/DEL-7001
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update u-boot-fw-utils patches to apply on upstream version 2019.07.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi customized linux kernel gpio.h file to allow debounce functionality by the
user space through the character device.
This commit patches the default gpio.h file that is used to generate the SDK
(which comes from kernel 4.18) with Digi debounce additions.
https://jira.digi.com/browse/DEL-7027
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Add Trustfence support for signing imx-boot images:
- Install a different U-Boot signing script for images with U-Boot SPL.
- Store mkimage log for later use in the signing script
- make 'print_hab_log' and store its log for later use in the signing script
https://jira.digi.com/browse/DEL-7023
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Do not evaluate TRUSTFENCE_SIGN_MODE on conditions where the sign mode
is not relevant:
1) U-Boot binary file should be signed directly after building it when simple
U-Boot images are used, but it should not be signed when imx-boot bundled
images are used.
For those, the signing process is performed later over the whole imx-boot
bundled binary file on a different recipe.
We use BOOTLOADER_IMAGE_RECIPE variable to evaluate this distinction.
BOOTLOADER_IMAGE_RECIPE is set to "u-boot" by default and is set to "imx-boot"
on ccimx8x and ccimx8mn machine configuration files.
2) For signing imx-boot images we should treat differently those images that
include the RAM configuration in their name and those that don't, as we do
for the rest of the tasks in the same recipe. We can ignore the sign mode
method in this case.
https://jira.digi.com/browse/DEL-7023
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Some CC6Plus units fail to communicate with the Bluetooth chip at a certain
temperature range, as happened on some CC6UL units.
Apply the following customizations to the NVM file so the communication is
maintained regardless of the temperature.
- Disable DEEP_SLEEP
- Enable Internal Clock
These customizations were already performed on the NVM file for the CC6UL.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 400b31f652fb98bb1620e03f85a33c231bf6f244)
Generalize 'Disable Deep Sleep' and 'Enable Internal clock' customizations
so they can be applied on every platform by defining
BT_INTCLOCK_WORKAROUND to '1'.
Disable the customizations by default and enable them for ccimx6ul only.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 78ef498178abe587d6e2cb4b1ed8ba5f8979fb4e)
We are currently applying customizations to the base NVM file on install.
There was an error that introduced the '"\' characters into the NVM file
instead of the intended hex data.
This commit fixes the implementation of this customization.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a204a7bfc54fc15aca0d87530c838fb427710a8e)
This commit adds a installation script that uses fastboot support to
update the target firmware.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6845
Additionally:
- The handling of gpios has been swapped so 'Set low XBEE_SLEEP_RQ' is done
before 'Power cycle XBEE_RESET_N' to assure the device doesn't enter sleep mode.
- Removed ExecStop entry from systemd service since it's doing nothing.
https://jira.digi.com/browse/DEL-6424https://jira.digi.com/browse/DEL-6423
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Digi Embedded Yocto 2.6-r3.1
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Mike Engel <mike.engel@digi.com>
There is no need to generate PV-PR revision of this file
since it's the same for any version.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The recipe needs to create a copy of the sign.sh script to be used by
other recipes, but the file is the same whether you use it for HAB or AHAB
images. This is determined through the use of an exported variable with
the mode. There is no need to have the script duplicated.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The only script that needs to generate the SRK_efuses is the sign.sh
script in the U-Boot code. For the rest of signed non-bootable artifacts
this is not required and it was creating the SRK_efuses file on every
recipe where the script was called, like linux-dey and others, which
eventually resulted in a conflict when copying the artifacts to the shared
deploy-image-dir.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This binary is required for signing the U-Boot scripts generated
by the U-Boot recipe but it wasn't available because this recipe
was not installing it anywhere.
At the same time, remove the installation from imx-boot, to avoid a
conflict between the two (imx-mkimage is a dependency from imx-boot
anyway).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Environment encryption is not yet supported in U-Boot.
Unset TRUSTFENCE_ENCRYPT_ENVIRONMENT on the machine configuration
and remove the platform conditional on the class.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit changes the u-boot sources needed to create standalone
signing tools to 2019.04. This u-boot supports all Trustfence
platforms.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds some dependencies to include the imx-mkimage package
that is needed to use the mkimage_imx8 tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Javier Viguera
Hector Palacios
Mike Engel
Arturo Buzarra
Gonzalo Ruiz
Francisco Gil
Tatiana Leon
Isaac Hermida
Gabriel Valcazar
Ariel D'Alessandro
Hector Bujanda