This application can be used to:
- Update the MCA firmware
- Configure the tamper settings
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3230
This commit adds the proper DEFAULTTUNE and overrides for the ccimx6ul
family of modules.
https://jira.digi.com/browse/DEL-3102
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
APM is an ancient power management API mainly for x86. There is an
optional emulation layer for ARM, but none of our platforms is using
it, so just remove the machine feature.
https://jira.digi.com/browse/DEL-2745
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
U-Boot environment on the CC6UL NAND is located at partition /dev/mtd1:
- original copy is located at offset 0 in the partition
- redundant copy is located 1 erase block (128K) after the original copy
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2552
The size of the destination partition (linux) is around 14MiB so the
max-leb-cnt must be reduced compared to the one used for the rootfs
partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2697
This commit will add the cryptodev module to the CC6UL kernel to use
the CAAM from user space through this device.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2719
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This daemon (rngd) feeds random data from hardware device to kernel
entropy pool.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This module is the interface between user-space (openssl, gnutls) and
the hardware cryptographic acceleration support (CAAM).
This commit installs the module in the rootfs and configures it so it is
loaded on boot.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These tools are part of the official FSL gst1.0 plugin. Add then to the
MACHINE_GSTREAMER_1_0_PLUGIN variable so they get added to the rootfs.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove QT4 phonon patches and qtmediaplayer demo as they depend on
gstreamer-0.10.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 2.0
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Split the ATH6KL firmware files to a different recipe and package so
they can be used regardless of what driver we are using (the external
module or the upstream driver).
Reuse the 'firmware-atheros' recipe which was creating a package with
bluetooth firmware, to create the package with wireless firmware as
well.
Also remove 'ccimx6' as compatible machine for the external atheros
module, as the module does not even compile with the kernel version we
are using (3.14).
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Which wireless module to use belongs more to the machine config files in
the BSP layer, than to the generic wireless packagegroup.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one u-boot supported for each platform, so there is no
need to explicitly set the u-boot preferred version.
As a result it was needed to rework the nvram recipe which was using the
removed PREFERRED_VERSION_u-boot-dey variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of creating a new recipe for u-boot fw-utils (fw_printenv) just
bbappend the recipe in Poky.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Linux 3.10 is still available via project's local.conf.
PREFERRED_VERSION_linux-dey = "3.10"
KERNEL_DEVICETREE = "..."
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Platform defconfig corresponds to sha1 'e1506ff' in the kernel.
At this point linux-3.10 continues to be the default, some device-tree
files were renamed and the external atheros module does not compile with
linux-3.14, so to use this kernel with dey-1.8, following lines are
needed in the project's local.conf:
PREFERRED_VERSION_linux-dey = "3.14"
KERNEL_DEVICETREE = " \
imx6dl-ccimx6sbc-wb.dtb \
imx6dl-ccimx6sbc-w.dtb \
imx6q-ccimx6sbc.dtb \
imx6q-ccimx6sbc-wb.dtb \
imx6q-ccimx6sbc-wb-ldo-bypass.dtb \
imx6q-ccimx6sbc-w.dtb \
"
MACHINE_FEATURES_remove = "wifi"
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 'resize2fs' command we use to resize the filesystem on first boot
has been moved from standard 'e2fsprogs' package to its own
'e2fsprogs-resize2fs', so this is the one we need to include now.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use Yocto's UBOOT_CONFIG new functionality to select the u-boot
configuration to build.
https://jira.digi.com/browse/DEL-1584
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the current DEY variants support and framework for CC6 because in
following commits we will add support for all *hardware* variants in
just one set of DEY images for CC6.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The IMAGE_FSTYPES variable for ccimx51js and ccimx53js was not correct,
it was taking the default one from Poky (IMAGE_FSTYPES="tar.gz")
instead of the one in 'imx-digi-base.inc' file. This happened because we
were using the weak '??=' assignement while the default in Poky was
using '?='.
Also rework a bit how this variable is set, so it is easily overriden on
project config files or initramfs recipes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove support for device tree variants as it's not needed. We will
only have different device tree for the different CPUs, but not for the
different variants of the same CPU.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Variant 0x8 does not have wireless/bluetooth, but it uses the same
device tree than the other variants.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3ba5bff51ebbe6be8325128ae3beb950993607d2)
Variant 0x5 (Furuno) does not have bluetooth, but the device tree in the
kernel is the same than the variant with bluetooth.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 7de11f08e95fecb8d4895556292a488a91af6817)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 015d029255eb407cca4c986562a304aef7de3940)
Kernel 3.10 does not fail to build perf features (as kernel 2.6.35
does), so there is no need to disable them for platforms using that
kernel version.
https://jira.digi.com/browse/DEL-1418
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In Yocto 1.7 meta-fsl-arm replaced udev-extraconf bbappend with a new
package (udev-rules-imx). So we need to adapt our own bbappend to these
changes so all the needed udev rules are in place.
https://jira.digi.com/browse/DEL-1336
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We inherited from DEL the requirement to build more than one flash image
for the same rootfs contents depending on the EBS of the flash chip.
Yocto does not have support to generate more than one flash image so we
had to create functions in the image_types_digi bbclass to provide this
feature.
This commit removes that functionality and uses the standard yocto
support to generate ubifs and jffs2 flash images. The way to customize
the flash parameters is via EXTRA_IMAGECMD_jffs2 and MKUBIFS_ARGS
variables. In our case those variables are already set depending on the
different hardware variants.
https://jira.digi.com/browse/DEL-232
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for Dizzy maintenance branch.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The interfaces file is now dynamically created for eth0, eth1 and wlan0. By
default they are configured if enabled in the machine features, and have
the same static configuration as before.
The static IPs can be configured as follows:
ETHn_STATIC_IP = "<ip address>"
ETHn_STATIC_NETMASK = "<netmask>"
ETHn_STATIC_GATEWAY = "<gateway>"
WLAN0_STATIC_IP = "<ip address>"
WLAN0_STATIC_NETMASK = "<netmask>"
To configure dynamic IPs you can use the following configuration in your
local.conf:
ETHn_DHCP = "dhcp"
WLAN0_DHCP = "dhcp"
https://jira.digi.com/browse/DEL-1178
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will be the preferred version for ccardimx28. Then use platform
override to set the one for ccimx5 and ccimx6.
Not having a platform override in the machine config file allows to do
a simple version override in the project's local.conf file with:
PREFERRED_VERSION_u-boot-dey = "2009.08"
Otherwise, if we use a platform override in the machine config that
takes precedence over a normal override in the project's local.conf
and we would have needed something like:
PREFERRED_VERSION_u-boot-dey_ccardimx28 ?= "2013.01"
in the project's config.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
FSL has this enabled but in our case it fails to build for ccardimx28js
using linux 3.10 with error:
fatal error: linux/mxcfb.h: No such file or directory
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add platform family to SOC_FAMILY, so it's part of the MACHINEOVERRIDES
variable and it can be used to generalize bitbake recipes.
https://jira.digi.com/browse/DEL-1105
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for Daisy maintenance branch.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
While on it, rework and simplify atheros firmware recipe:
* remove 'unknown' version (renamed recipe)
* do not create empty debug and development packages
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was broken after the upgrade to Yocto 1.6 because the framework to
generate images in Yocto 1.6 changed.
https://jira.digi.com/browse/DEL-1032
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently Vivante does not provide a valid GL API so Xorg fails to link
against it, we cannot workaround it easily in newer Xorg version so
instead of maintaining a pile of patches for it we use 1.14.4 version
as an interim solution.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It was added to fix [DEL-898] but it is no longer needed after the
underlying changes in the rootfs hierarchy (added '/run' mountpoint)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Provides fw_printenv/fw_setenv utilities to read/write the u-boot
environment from Linux.
https://jira.digi.com/browse/DEL-800
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment this image is a VFAT file system containing the kernel
and the device tree blobs.
https://jira.digi.com/browse/DEL-932
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is now used in both ccimx6adpt and ccardimx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Previously jffs2 images flashed from u-boot were not booting Linux. The
kernel was unable to mount the rootfs.
There have been some patches lately in the kernel that fix this problem,
so build jffs2 images.
Nevertheless the default image type is still ubifs when using linux 3.x.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use a variable to select GPU flavour (X11, framebuffer).
No functionality change, just coding style.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Those boolean helper variables can be used in different recipes so move
them to a common place.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment our kernel 3.10 on ccardimx28js does not support jffs2
images, so do not build them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is still a runtime-recommend of udev package so it gets installed
in udev based images (graphical) and not installed in mdev based images
(minimal).
https://jira.digi.com/browse/DEL-825
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The machine variant is most specific than machine name.
Before: MACHINEOVERRIDES="armv5:mxs:wb:ccardimx28js"
After: MACHINEOVERRIDES="armv5:mxs:ccardimx28js:wb"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The UBOOT_LOADADDRESS and UBOOT_ENTRYPOINT variables are only used in
the kernel recipe, so remove from the machine configuration files.
Also, use the defconfig from the kernel tree which compiles all the
support by default and expects the device tree to be configured with
the desired support. Hence, remove all the empty configuration fragments
files.
https://jira.digi.com/browse/DEL-577
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The build was failing for any IMX platform because it was trying to
build a bootstream u-boot.
The u-boot variables (UBOOT_*) used by yocto were incorrectly set,
so I reworked and simplified them to fix the bug and ease maintenance.
https://jira.digi.com/browse/DEL-562
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need separate linux-libc-recipes if we want to support different
kernels.
On the 1.4 meta-fsl-arm layer this recipe will disappear, so review then.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Hector Palacios
Javier Viguera
Isaac Hermida
Diaz de Grenu, Jose
Alex Gonzalez
Mike Engel